Commit Graph

154532 Commits

Author SHA1 Message Date
Ben Dooks
aa6b904e66 ASoC: tlv320aic3x: fixup board device changes
Fixup the device changes by modifying the files that we just removed the
explicit device creation from with i2c_register_board_info() until this
can be moved into the relevant board files.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21 10:52:57 +01:00
Ben Dooks
cb3826f524 ASoC: tlv320aic3x: Change to use device model
The tlv320aic3x driver managed its own i2c device, instead of an extant
one created by the board support code. Change the code to make it so that
the driver binds to an extant (in this case i2c) device.

Add explict tlv320aic33 as well as tlv320aic3x to the supported device
table and remove the old driver bindings from the users of this code.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21 10:52:49 +01:00
Ben Dooks
14412acde5 ASoC: S3C24XX: Add audio core and tlv320aic23 for Simtec boards
Add core support for the range of S3C24XX Simtec boards with TLV320AIC23
CODECs on them. Since there are also boards with similar IIS routing the
AMP and the configuration code is placed in a core file for re-use with
other CODEC bindings.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21 10:52:42 +01:00
Eduardo Valentin
a0a499c579 ASoC: OMAP: Use DMA operating mode of McBSP
Configures DMA sync mode depending on McBSP operating mode value.
The value is configurable by McBSP instance. So, depending
on McBSP operating mode, the DMA sync mode is passed from
omap-mcbsp to omap-pcm. Besides that, it also configures
McBSP threshold value depending on which McBSP mode is activated.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:29 +01:00
Eduardo Valentin
caebc0cb3b ASoC: OMAP: Use McBSP threshold to playback and capture
This patch changes the way DMA is done in omap-pcm.c
in order to reduce power consumption. There is no need
to have so much SW control in order to have DMA in idle
state during audio streaming. Configuring McBSP threshold value
and DMA to FRAME_SYNC are sufficient.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:29 +01:00
Eero Nurkkala
ca6e2ce086 ASoC: Always syncronize audio transfers on frames
All these steps are required for ASoC to behave correctly.
rccr and xccr are format dependent, for example TDM audio
has different values than I2S or DSP_A. Also the
omap_mcbsp_xmit_enable and/or omap_mcbsp_recv_enable must
be called right after the DMA has started.
This provides no longer L and R channels switching at random.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:29 +01:00
Eero Nurkkala
c721bbdad7 ASoC: Add runtime check for RFIG and XFIG
This is, no RFIG or XFIG (Not defined in 34xx), correct
initiliazation of rccr and xccr.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:28 +01:00
Eduardo Valentin
a152ff24b9 ASoC: OMAP: Make DMA 64 aligned
Align DMA address to DMA burst transaction sizes.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:28 +01:00
Eduardo Valentin
9599d485cb ASoC: OMAP: Enable DMA burst mode
Improve DMA transfers by enabling Burst transaction.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:28 +01:00
Eero Nurkkala
72cc6d715d OMAP: McBSP: Let element DMA mode hit retention also
The device no longer hits retention if element DMA
mode is taken for at least the duration of the
serial console timeout. Force element DMA mode to
shut down through smartidle.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:28 +01:00
Eero Nurkkala
fa3935ba34 OMAP: McBSP: Do not enable wakeups for no-idle mode
When no-idle mode is taken, wakeups need not to be enabled.
Moreover, CLOCKACTIVITY bits are unnecessary with this mode
also.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:28 +01:00
Eduardo Valentin
d99a7454e5 OMAP: McBSP: Configure NO IDLE mode for DMA mode different of threshold
Use dma mode property to configure NO IDLE or SMART IDLE of McBSPs.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:27 +01:00
Eero Nurkkala
2ba93f8fa7 OMAP: McBSP: Retain McBSP FCLK clockactivity
FCLK may get autogated so that it prevents the McBSP
to work properly. It is the bit 9 that must be set
for maintaining the McBSP FCLK.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:27 +01:00
Eduardo Valentin
d9a9b3f5f7 OMAP: McBSP: Change wakeup signals
Configure only XRDYEN and RRDYEN wakeup signals
in order to get better power consumption.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:27 +01:00
Eero Nurkkala
2122fdc629 OMAP: McBSP: Wakeups utilized
This patch enables the smart idle mode while
McBPS is being utilized. Once it's done,
force idle mode is taken instead. Apart of it,
it also configures what signals will wake mcbsp up.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:27 +01:00
Peter Ujfalusi
98cb20e889 OMAP: McBSP: Add link DMA mode selection
It adds a new sysfs file, where the user can configure the mcbsp mode to use.
If the mcbsp channel is in use, it does not allow the change.
Than in omap_pcm_open we can call the omap_mcbsp_get_opmode to get the mode,
store it, than use it to implement the different modes.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:27 +01:00
Eduardo Valentin
4c8200aeb0 OMAP: McBSP: Rename thres sysfs symbols
This patch renames the symbols that handles threshold
sysfs properties. This way we can add more sysfs properties
to them.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:26 +01:00
Peter Ujfalusi
7e4f943b72 OMAP3: McBSP: Lower the maximum buffersize for McBSP1, 3, 4, 5
Do not allow applications to use the full buffer found on
McBSP1,3,4,5. Using the full buffer in threshold mode causes
the McBSP buffer to run dry, which can be observed as channels
are switching (in reality the channels are shifting).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:26 +01:00
Eduardo Valentin
a1a56f5faa OMAP: McBSP: Create and export max_(r|t)x_thres property
This patch export through sysfs two properties to configure
maximum threshold for transmission and reception on each
mcbsp instance. Also, it exports two helper functions to
allow mcbsp users to read this values.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:26 +01:00
Eduardo Valentin
7aa9ff56ca OMAP: McBSP: Add transmit/receive threshold handler
This patch adds a way to handle transmit/receive threshold.
It export to mcbsp users a callback registration procedure.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:26 +01:00
Eduardo Valentin
44a6311c0a OMAP: McBSP: Use appropriate value for startup delay
Increasing startup delay value as worst case:
 CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec

Although, 100us may give enough time for two CLKSRG,
due to some unknown PM related, clock gating etc. reason,
this patch increases it to 500us.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:25 +01:00
Eduardo Valentin
946a49a95d OMAP: McBSP: Add IRQEN, IRQSTATUS, THRESHOLD2 and THRESHOLD1 registers.
Adding McBSP register definition for IRQEN, IRQSTATUS, THRESHOLD2 and THRESHOLD1 registers.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:25 +01:00
Eero Nurkkala
9abea08e43 OMAP: McBSP: Provide functions for ASoC frame syncronization
ASoC has an annoying bug letting either L or R channel to be
played on L channel. In other words, L and R channels can
switch at random. This provides McBSP funtionality that may
be used to fix this feature.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:10:25 +01:00
Kuninori Morimoto
a4d7d550a9 ASoC: Add SuperH FSI driver support for ALSA
This driver is very simple.
It support playback only now.
This patch is tested by ms7724se board.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 20:01:42 +01:00
Shine Liu
f61c890ec6 ASoC: S3C24XX : Align the peroid size to the buffer size
> Then it's a driver bug.  If unaligned period size is allowed, it means
> that the irq is really generated in that period, not at the buffer
> boundary.  Otherwise, it must have a proper hw-constraint to align the
> period size to the buffer size.

This patch will fix the bug metioned in the above mail. Force the peroid
size to be aligned with the buffer size.

Based and tested on linux-2.6.31-rc6.

Signed-off-by: Shine Liu <shinel@foxmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20 19:42:40 +01:00
Mark Brown
f8bae4caaa ALSA: Restore support for DMAless DAIs on PXA
Used for applications such as direct bluetooth connections on
smartphones which don't go via the CPU. This used to be supported
before the refactoring to share code but this check was removed
during that move.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-19 20:30:14 +01:00
Mark Brown
474e09ca01 ASoC: Provide default set_bias_level() implementation
If the CODEC does not provide a set_bias_level() then update the
bias_level variable for it since other parts of the system expect
that to be maintained.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-19 14:18:53 +01:00
Mark Brown
d1a5e44b89 ASoC: Remove duplicate ADC/DAC widgets from wm_hubs.c
These need to be in the CODEC since the DAIs supported by the CODECs
aren't static.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-18 16:04:24 +01:00
Mark Brown
b2472b1d4c ASoC: Reenable S3C64xx I2S support
Joonyoung Shim reports that S3C64xx I2S is working on the NCP boards so
allow it to be selected in Kconfig.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmciro.com>
2009-08-18 16:02:59 +01:00
Joonyoung Shim
0914b93f4f ASoC: Fix data format configuration for S3C64XX IISv2
The data format configuration for S3C64xx IISv2 was hardcoded for IISMOD
register. This patch changes to the defined values it.

And instead of bits 9 and 10 of IISMOD we should clear bits 13 and 14.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-18 16:02:36 +01:00
Mark Brown
d3c9e9a139 ASoC: Implement TDM configuration for WM8993
Note that the number of slots used internally is specified in terms
of stereo slots while the external API works with mono slots.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17 18:53:50 +01:00
Mark Brown
0182dcc52c ASoC: Fix WM8993 MCLK configuration for high frequency MCLKs
When used without the PLL we were accidentally clearing the MCLK/2
divider, resulting in a double rate SYSCLK when the divider should
have been used.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17 18:53:44 +01:00
Mark Brown
1ca04065c3 ASoC: Power speakers and headphones simultaneously
Speaker and headphone outputs do not need to be handled separately
since they can't be part of the same path.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17 16:26:59 +01:00
Mark Brown
b14b76a56e ASoC: Fix handling of bias levels for non-DAPM codecs
If the system doesn't have any DAPM widgets then we can't use their
state to check if the bias level for the codec should be up.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17 12:57:59 +01:00
Shine Liu
0c093fb542 ASoC: UDA134X: Fix mistaken mute/unmute code
There is a mistake in current uda134x_mute function: mute_reg has been
changed in line 162 or line 164, so uda134x_write should write
"mute_reg" but not "mute_reg & ~(1<<2)" to
UDA134X_DATA010.

Signed-off-by: Shine Liu <shinel@foxmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17 12:56:57 +01:00
Janusz Krzysztofik
471e3dec3a ASoC: OMAP: Enhance OMAP1510 DMA progress software counter
Enhance period_index accuracy, particularly just before buffer rewind, by
making use of DMA interrupt status flags in addition to simply counting up
interrupts.

Created against linux-2.6.31-rc5.

Tested on Amstrad Delta.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17 11:00:34 +01:00
Janusz Krzysztofik
64844a6ac8 ASoC: OMAP: Make use of DMA channel self linking on OMAP1510
Use newly implemented DMA channel self linking on OMAP1510 like on other OMAP
models. Remove unnecessary DMA transfer restart from interrupt handler
routine.

The interrupt routine used to maintain a period index, originally needed for
counting up periods up to a full buffer in order to restart the DMA transfer.
For some time, this counter is also used as a replacement for hardware DMA
progress counter that has been found unusable on OMAP1510 in case of playback.
Thus, the period index calculation cannot be omitted completely. However, the
accuracy of this counter can still suffer from missing DMA interrupts.

In order to work correctly, it requires patch 1 from this series also applied:
[RFC][PATCH 1/3] ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510

Created against linux-2.6.31-rc5.

Tested on Amstrad Delta.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17 10:59:59 +01:00
Mark Brown
1e97f50b70 ASoC: Factor out cache I/O from WM8974
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-15 12:15:10 +01:00
Mark Brown
37cfa1950e Merge branch 'wm8974-upstream' into for-2.6.32 2009-08-15 11:52:43 +01:00
Mark Brown
29e02cb3ff ASoC: Hook i.MX into build
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-15 11:37:30 +01:00
Mark Brown
d555a552ae ASoC: Staticise unexported variables
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-15 11:36:49 +01:00
Mark Brown
a2d512a978 ASoC: Remove unneeded i.MX dependency on SND
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-15 11:36:20 +01:00
Mark Brown
08229de4b4 Merge branch 'for-2.6.32' into mxc
Conflicts:
	sound/soc/Makefile
2009-08-15 11:20:44 +01:00
Barry Song
2a708137fd ASoC: delete -spi suffix in ad1938 and free private data while registers fail
Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-14 17:53:02 +01:00
Peter Ujfalusi
9028935d75 ASoC: TWL4030: Fix for capture mixer strings
Change the strings related to capture in order to be
interpreted correctly by alsamixer and possible other
UI based mixer applications.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-14 17:52:59 +01:00
Marek Vasut
4ac0478f2a ALSA: Allow passing platform_data for pxa2xx-ac97
This patch adds support for passing platform data to ac97 bus devices
from PXA2xx-AC97 driver..

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13 22:19:37 +01:00
Chaithrika U S
30230f4cd7 ASoC: DaVinci: Add audio support fot DA850/OMAP-L138 EVM
There is one instance of McASP on DA850/OMAP-L138 SoC. This is
connected to TLV320AIC3106 codec for audio playback and capture.
This patch adds audio support on this platform. Some of the
structure prefix names which are common for DA830/OMAP-L137 EVM and
DA850/OMAP-L138 EVM have been renamed to da8xx from da830.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13 22:19:36 +01:00
Chaithrika U S
517ee6cf69 ASoC: DaVinci: Add a DAI format to McASP driver
The patch adds a DAI format: Codec bit clock master and frame sync slave,
to the driver.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13 22:19:35 +01:00
Chaithrika U S
6a99fb5fb8 ASoC: DaVinci: McASP driver enhacements
On DA830/OMAP-L137 and DA850/OMAP-L138 SoCs, the McASP peripheral has FIFO
support. This FIFO provides additional data buffering. It also provides
tolerance to variation in host/DMA controller response times.
The read and write FIFO sizes are 256 bytes each. If FIFO is enabled,
the DMA events from McASP are sent to the FIFO which in turn sends DMA requests
to the host CPU according to the thresholds programmed.
More details of the FIFO operation can be found at
http://focus.ti.com/general/docs/lit/getliterature.tsp?literatureNumber=
sprufm1&fileType=pdf

This patch adds support for FIFO configuration. The platform data has a
version field which differentiates the McASP on different SoCs.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13 22:19:35 +01:00
Mark Brown
a2342ae325 ASoC: Factor out shared code from WM8993
The WM8993 analogue control is shared with other devices in the same
product line.  Since this is a very substantial proportion of the
driver move the definitions of these controls into a new wm_hubs module
which allows them to be shared between the two.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13 22:19:31 +01:00