2021-02-08 14:48:21 +01:00
|
|
|
# This file allows user to override the factory
|
|
|
|
# defaults for the WLAN Driver
|
|
|
|
|
|
|
|
# Phy Mode (auto, b, g, n, etc)
|
|
|
|
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
|
|
|
|
# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
|
|
|
|
# 7 = 11b only 8 = 11ac only.
|
|
|
|
gDot11Mode=0
|
|
|
|
|
|
|
|
# UAPSD service interval for VO,VI, BE, BK traffic
|
|
|
|
InfraUapsdVoSrvIntv=0
|
|
|
|
InfraUapsdViSrvIntv=0
|
|
|
|
InfraUapsdBeSrvIntv=0
|
|
|
|
InfraUapsdBkSrvIntv=0
|
|
|
|
|
|
|
|
# Flag to allow STA send AddTspec even when ACM is Off
|
|
|
|
gAddTSWhenACMIsOff=1
|
|
|
|
|
|
|
|
#Enable OBSS protection
|
|
|
|
gEnableApOBSSProt=1
|
|
|
|
|
|
|
|
# Maximum Tx power
|
|
|
|
# gTxPowerCap=30
|
|
|
|
|
|
|
|
# Fragmentation Threshold
|
|
|
|
# gFragmentationThreshold=2346
|
|
|
|
|
|
|
|
# RTS threshold
|
|
|
|
RTSThreshold=1048576
|
|
|
|
|
|
|
|
# WMM Enable/Disable
|
|
|
|
WmmIsEnabled=0
|
|
|
|
|
|
|
|
# 802.11d support
|
|
|
|
g11dSupportEnabled=0
|
|
|
|
|
|
|
|
# DFS Master Capability
|
|
|
|
gEnableDFSMasterCap=1
|
|
|
|
|
|
|
|
ImplicitQosIsEnabled=0
|
|
|
|
|
|
|
|
gNeighborScanTimerPeriod=200
|
|
|
|
gNeighborLookupThreshold=76
|
|
|
|
gNeighborScanChannelMinTime=20
|
|
|
|
gNeighborScanChannelMaxTime=30
|
|
|
|
|
|
|
|
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
|
|
|
# To enable, set FastRoamEnabled=1
|
|
|
|
# To disable, set FastRoamEnabled=0
|
|
|
|
FastRoamEnabled=1
|
|
|
|
|
|
|
|
# Sets RSSI preference for 5GHz over 2.4GHz AP
|
|
|
|
gSelect5GHzMargin=5
|
|
|
|
|
|
|
|
# HIGH RSSI roaming
|
|
|
|
# RSSI threshold offset for 2G to 5G roam
|
|
|
|
# default is 40
|
|
|
|
roam_bad_rssi_thresh_offset_2g=40
|
|
|
|
|
|
|
|
#RSSI threshold for background roam
|
|
|
|
roam_bg_scan_bad_rssi_thresh=-76
|
|
|
|
|
|
|
|
# Candidate AP minimum RSSI for beacon miss roam trigger
|
|
|
|
candidate_min_rssi_for_beacon_miss=-83
|
|
|
|
|
|
|
|
#Channel Bonding
|
|
|
|
gChannelBondingMode5GHz=1
|
|
|
|
|
|
|
|
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
|
|
|
|
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
|
|
|
|
#is idle for last 10 seconds.) For both active and power save clients.
|
|
|
|
|
|
|
|
#Power save clients: DUT set TIM bit from 10th second onwards and till client
|
|
|
|
#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
|
|
|
|
|
|
|
|
#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
|
|
|
|
#success still we try on 11th second if not tries on 12th and so on till 15th
|
|
|
|
#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
|
|
|
|
#case DUT will detect client got removed in (10+5) seconds.
|
|
|
|
#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
|
|
|
|
|
|
|
|
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
|
|
|
|
#it is period where we send NULL frame.
|
|
|
|
#gApLinkMonitorPeriod = 10
|
|
|
|
#gGoLinkMonitorPeriod = 10
|
|
|
|
|
|
|
|
#gApKeepAlivePeriod is time to spend to check whether frame
|
|
|
|
#are succeed to send or not. Hence total effective detection time is
|
|
|
|
#(gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
|
|
|
|
|
|
|
#Enable Keep alive with non-zero period value
|
|
|
|
gStaKeepAlivePeriod = 30
|
|
|
|
|
|
|
|
# Enable DFS channel roam
|
|
|
|
# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
|
|
|
|
gAllowDFSChannelRoam=1
|
|
|
|
|
|
|
|
gVhtChannelWidth=2
|
|
|
|
|
|
|
|
# Set txchainmask and rxchainmask
|
|
|
|
# These parameters are used only if gEnable2x2 is 0
|
|
|
|
# Valid values are 1,2
|
|
|
|
# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
|
|
|
|
# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
|
|
|
|
gSetTxChainmask1x1=1
|
|
|
|
gSetRxChainmask1x1=1
|
|
|
|
|
|
|
|
# MCC to SCC Switch mode:
|
|
|
|
# 0-Disable
|
|
|
|
# 1-Enable
|
|
|
|
# 2-Force SCC if same band, with SAP restart
|
|
|
|
# 3-Force SCC if same band, without SAP restart by sending (E)CSA
|
|
|
|
# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
|
|
|
|
# without SAP restart by sending (E)CSA
|
|
|
|
gWlanMccToSccSwitchMode = 3
|
|
|
|
|
|
|
|
# 1=enable tx STBC; 0=disable
|
|
|
|
gEnableTXSTBC=1
|
|
|
|
|
|
|
|
# 1=enable rx STBC; 0=disable
|
|
|
|
gEnableRXSTBC=0
|
|
|
|
|
|
|
|
#Enable/Disable Tx beamformee in SAP mode
|
|
|
|
gEnableTxBFeeSAP=1
|
|
|
|
|
|
|
|
# Enable Tx beamforming in VHT20MHz
|
|
|
|
# Valid values are 0,1. If commented out, the default value is 0.
|
|
|
|
# 0=disable, 1=enable
|
|
|
|
gEnableTxBFin20MHz=1
|
|
|
|
|
|
|
|
#Enable/Disable SU Tx beamformer support
|
|
|
|
gEnableTxSUBeamformer=0
|
|
|
|
|
|
|
|
# 802.11K support
|
|
|
|
gRrmEnable=1
|
|
|
|
|
|
|
|
#Enable Power Save offload
|
|
|
|
gEnablePowerSaveOffload=2
|
|
|
|
|
|
|
|
# Firmware log mode
|
|
|
|
# Valid values are 0,1,2
|
|
|
|
# 0=Disable, 1=WMI, 2=DIAG
|
2021-04-16 17:53:55 +02:00
|
|
|
gEnablefwlog=0
|
2021-02-08 14:48:21 +01:00
|
|
|
|
|
|
|
# Maximum Receive AMPDU size (VHT only. Valid values:
|
|
|
|
# 0->8k 1->16k 2->32k 3->64k 4->128k)
|
|
|
|
gVhtAmpduLenExponent=7
|
|
|
|
|
|
|
|
# Maximum MPDU length (VHT only. Valid values:
|
|
|
|
# 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
|
|
|
gVhtMpduLen=2
|
|
|
|
|
|
|
|
#Enable or Disable p2p device address administered
|
|
|
|
isP2pDeviceAddrAdministrated=0
|
|
|
|
|
|
|
|
# Set Thermal Power limit
|
|
|
|
TxPower2g=10
|
|
|
|
TxPower5g=10
|
|
|
|
|
|
|
|
#Enable VHT on 2.4Ghz
|
|
|
|
gEnableVhtFor24GHzBand=1
|
|
|
|
|
|
|
|
#Maximum number of offload peers supported
|
|
|
|
# gMaxOffloadPeers=2
|
|
|
|
|
|
|
|
# controlling the following offload patterns
|
|
|
|
# through ini parameter. Default value is 1
|
|
|
|
# to disable set it to zero. ssdp = 0
|
|
|
|
# Setup multicast pattern for mDNS 224.0.0.251,
|
|
|
|
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
|
|
|
|
ssdp=0
|
|
|
|
|
|
|
|
# RA filtering rate limit param, the current value would not
|
|
|
|
# help if the lifetime in RA is less than 3*60=3min. Then
|
|
|
|
# we need to change it, though it is uncommon.
|
|
|
|
# gRAFilterEnable=0
|
|
|
|
gRArateLimitInterval=600
|
|
|
|
|
|
|
|
# Maximum number of concurrent connections
|
|
|
|
gMaxConcurrentActiveSessions=3
|
|
|
|
|
|
|
|
# Disable/Enable GreenAP
|
|
|
|
# 0 to disable, 1 to enable, default: 1
|
|
|
|
gEnableGreenAp=0
|
|
|
|
|
|
|
|
gPNOScanSupport=1
|
|
|
|
|
|
|
|
#Enable/Disable LPASS support
|
|
|
|
# 0 to disable, 1 to enable
|
|
|
|
gEnableLpassSupport=1
|
|
|
|
|
|
|
|
# Whether userspace country code setting shld have priority
|
|
|
|
gCountryCodePriority=1
|
|
|
|
|
|
|
|
# Enable or Disable Multi-user MIMO
|
|
|
|
# 1=Enable (default), 0=Disable
|
|
|
|
gEnableMuBformee=1
|
|
|
|
|
|
|
|
# Enable support for TDLS
|
|
|
|
# 0 - disable
|
|
|
|
# 1 - enable
|
|
|
|
gEnableTDLSSupport=1
|
|
|
|
|
|
|
|
# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
|
|
|
|
# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
|
|
|
|
# and RSSI) is met and then will initiate teardown when teardown criteria
|
|
|
|
# (idle packet count and RSSI) is met.
|
|
|
|
# 0 - disable
|
|
|
|
# 1 - enable
|
|
|
|
gEnableTDLSImplicitTrigger=1
|
|
|
|
|
|
|
|
# Enable TDLS External Control. That is, user space application has to
|
|
|
|
# first configure a peer MAC in wlan driver towards which TDLS is desired.
|
|
|
|
# Device will establish TDLS only towards those configured peers whenever
|
|
|
|
# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
|
|
|
|
# when teardown criteria (idle packet count and RSSI) is met. However,
|
|
|
|
# device will accept TDLS connection if it is initiated from any other peer,
|
|
|
|
# even if that peer is not configured.
|
|
|
|
# 0 - disable
|
|
|
|
# 1 - enable
|
|
|
|
# For TDLS External Control, Implicit Trigger must also be enabled.
|
|
|
|
gTDLSExternalControl=1
|
|
|
|
|
|
|
|
# Enable support for TDLS off-channel operation
|
|
|
|
# 0 - disable
|
|
|
|
# 1 - enable
|
|
|
|
# TDLS off-channel operation will be invoked when there is only one
|
|
|
|
# TDLS connection.
|
|
|
|
gEnableTDLSOffChannel=1
|
|
|
|
|
|
|
|
# VHT Tx/Rx MCS values
|
|
|
|
# Valid values are 0,1,2. If commented out, the default value is 0.
|
|
|
|
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
|
|
|
gVhtRxMCS=2
|
|
|
|
gVhtTxMCS=2
|
|
|
|
|
|
|
|
# VHT Tx/Rx MCS values for 2x2
|
|
|
|
# Valid values are 0,1,2. If commented out, the default value is 0.
|
|
|
|
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
|
|
|
gEnable2x2=1
|
|
|
|
gVhtRxMCS2x2=2
|
|
|
|
gVhtTxMCS2x2=2
|
|
|
|
|
|
|
|
#IPA config is a bit mask and following are the configurations.
|
|
|
|
#bit0 IPA Enable
|
|
|
|
#bit1 IPA PRE Filter enable
|
|
|
|
#bit2 IPv6 enable
|
|
|
|
#bit3 IPA Resource Manager (RM) enable
|
|
|
|
#bit4 IPA Clock scaling enable
|
|
|
|
#bit5 IPA uC ENABLE
|
|
|
|
#bit6 IPA uC STA ENABLE
|
|
|
|
#bit8 IPA Real Time Debugging
|
|
|
|
gIPAConfig=0x7d
|
|
|
|
gIPADescSize=800
|
|
|
|
|
|
|
|
# Enable TCP Segmentation Offload
|
|
|
|
# 1 - enable 0 - disable
|
|
|
|
TSOEnable=1
|
|
|
|
|
|
|
|
# Enable Generic Receive Offload
|
|
|
|
# 1 - enable(default) 0 - disable
|
|
|
|
GROEnable=1
|
|
|
|
|
|
|
|
# Enable HT MPDU Density
|
|
|
|
# 4 for 2 micro sec
|
|
|
|
ght_mpdu_density=4
|
|
|
|
|
|
|
|
# Enable flow steering to enable multiple CEs for Rx flows.
|
|
|
|
# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
|
|
|
|
# Parallel Rx paths.
|
|
|
|
# 1 - enable 0 - disable(default)
|
|
|
|
gEnableFlowSteering=1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
|
|
|
|
maxMSDUsPerRxInd=8
|
|
|
|
|
|
|
|
# Enable NUD tracking feature
|
|
|
|
# 0 - disable(default),1 - trigger disconnect, 2 - trigger roaming,
|
|
|
|
# 3 - trigger roaming, but if roam fails, disconnection
|
|
|
|
gEnableNUDTracking=3
|
|
|
|
################ Datapath feature set End ################
|
|
|
|
|
|
|
|
################ NAN feature set start ###################
|
|
|
|
|
|
|
|
# Enable NAN discovery (NAN 1.0)
|
|
|
|
# 1 - enable 0 - disable(default)
|
|
|
|
gEnableNanSupport=1
|
|
|
|
# Enable NAN Datapath
|
|
|
|
genable_nan_datapath=1
|
|
|
|
|
|
|
|
################ NAN feature set end #####################
|
|
|
|
|
|
|
|
hostscan_adaptive_dwell_mode=1
|
|
|
|
|
|
|
|
#disable probe request deferral
|
|
|
|
oce_enable_probe_req_deferral=0
|
|
|
|
|
|
|
|
# set modulated DTIM interval
|
|
|
|
gEnableModulatedDTIM=3
|
|
|
|
gMaxLIModulatedDTIM=3
|
|
|
|
|
|
|
|
# groam_dense_rssi_thresh_offset - Sets dense roam RSSI threshold diff
|
|
|
|
groam_dense_rssi_thresh_offset=10
|
|
|
|
|
|
|
|
# Dense traffic threshold in kBps
|
|
|
|
gtraffic_threshold=50
|
|
|
|
|
|
|
|
|
|
|
|
# Enable/Disable the Motion Aided Wireless Connectivity
|
|
|
|
# based NLO using this parameter
|
|
|
|
mawc_nlo_enabled=0
|
|
|
|
|
|
|
|
#Enable host side recovery
|
|
|
|
gEnableSelfRecovery=1
|
|
|
|
|
|
|
|
#enable/disable FT open feature
|
|
|
|
enable_ftopen=0
|
|
|
|
|
|
|
|
# This ini is used to allow STA+SAP SCC on LTE coex channel
|
|
|
|
# 0 - Disallow STA+SAP SCC on LTE coex channel
|
|
|
|
# 1 - Allow STA+SAP SCC on LTE coex channel
|
|
|
|
g_sta_sap_scc_on_lte_coex_chan=1
|
|
|
|
|
|
|
|
drop_bcn_on_chan_mismatch=0
|
|
|
|
|
|
|
|
# Enable/Disable rtt sta mac randomization
|
|
|
|
enable_rtt_mac_randomization=1
|
|
|
|
|
|
|
|
#Enable/Disable SNR monitoring
|
|
|
|
gEnableSNRMonitoring=1
|
|
|
|
|
|
|
|
# WLM latency Enable
|
|
|
|
wlm_latency_enable=1
|
|
|
|
|
|
|
|
# WLM flags setting for ultralow level, bit9 for BMPS disabled
|
|
|
|
wlm_latency_flags_ultralow=0x3
|
|
|
|
|
|
|
|
# Enable ETSI SRD channels by Xiaomi. Qualcom default value is disable
|
|
|
|
etsi13_srd_chan_in_master_mode=1
|
|
|
|
|
|
|
|
# Allow STA+SAP SCC on DFS channel with master mode support disabled
|
|
|
|
g_sta_sap_scc_on_dfs_chan=2
|
|
|
|
|
|
|
|
# HTC Credit count for WMI operation
|
|
|
|
# 1 to serialize the WMI commands
|
|
|
|
# 0 default works with FW advertised credits, 2 credits usually
|
|
|
|
gWmiCreditCount=1
|
|
|
|
|
|
|
|
# Enable enhanced ACS
|
|
|
|
acs_with_more_param=1
|
|
|
|
# bits 0-3: rssi weight
|
|
|
|
# bits 4-7: bss count weight
|
|
|
|
# bits 8-11: noise floor weight
|
|
|
|
# bits 12-15: channel free weight
|
|
|
|
# bits 16-19: tx power range weight
|
|
|
|
# bits 20-23: tx power throughput weight
|
|
|
|
# bits 24-31: reserved
|
|
|
|
AutoChannelSelectWeight=0x00fafafa
|
|
|
|
|
|
|
|
# Enable/Disable broadcast TWT
|
|
|
|
bcast_twt=1
|
|
|
|
|
|
|
|
# Enable broadcast logging to the userspace entities
|
|
|
|
gMulticastHostFwMsgs=1
|
|
|
|
# Disable packetlog explicitly
|
|
|
|
gEnablePacketLog=0
|
|
|
|
|
|
|
|
# Set IPA bandwidth levels in mbps
|
|
|
|
gIPALowBandwidthMbps=100
|
|
|
|
gIPAMediumBandwidthMbps=400
|
|
|
|
gIPAHighBandwidthMbps=800
|
|
|
|
|
|
|
|
# Add another interface while driver load
|
|
|
|
gEnableConcurrentSTA=wlan1
|
|
|
|
|
|
|
|
#max time for active 2G channel scan.
|
|
|
|
#if set to zero, gActiveMaxChannelTime is used for 2G channel scan.
|
|
|
|
active_max_channel_time_2g=0
|
|
|
|
|
|
|
|
#Enable to give higher priority for 5g scc than dbs
|
|
|
|
g_prefer_5g_scc_to_dbs=8
|
|
|
|
|
|
|
|
# Enable/Disable LPRx
|
|
|
|
gEnableLPRx=0
|
|
|
|
|
|
|
|
gActiveUcBpfMode=0
|
|
|
|
gActiveMcBcBpfMode=1
|
|
|
|
force_start_sap=1
|
|
|
|
|
|
|
|
# Assoc failure timeout value
|
|
|
|
assoc_failure_timeout=5000
|
|
|
|
|
|
|
|
# Feature runtime PM: START
|
|
|
|
gRuntimePM=2
|
|
|
|
gRuntimePMDelay=500
|
|
|
|
# Feature runtime PM: END
|
|
|
|
|
|
|
|
#Idle Monitor Roaming: START
|
|
|
|
enable_idle_roam=true
|
|
|
|
idle_roam_min_rssi=-65
|
|
|
|
#Idle Monitor Roaming: END
|
|
|
|
|
|
|
|
gindoor_channel_support=1
|
|
|
|
|
|
|
|
np_chan_weight=0x1
|
|
|
|
|
|
|
|
#roaming more like 5G and also not HE cap
|
|
|
|
chan_width_weightage=5
|
|
|
|
he_caps_weightage=1
|
|
|
|
chan_band_weightage=5
|
|
|
|
|
|
|
|
END
|
|
|
|
|
|
|
|
# Note: Configuration parser would not read anything past the END marker
|
|
|
|
|