android_kernel_xiaomi_sm7250/drivers/usb
David Brownell f3f3253d64 [PATCH] root hub updates (greater half)
This patch associates hub suspend and resume logic (including for root hubs)
with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying
two troublesome versions of suspend logic into just one.  It'll be easier to
keep things right from now on.

  - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of
    only when USB_SUSPEND is enabled:
     * Those root hub methods are now called from hub suspend/resume;
       no more skipping between layers during device suspend/resume;
     * It now handles cases allowed by sysfs or autosuspended root hubs,
       by forcing the hub interface to resume too.

  - All devices, including virtual root hubs, now get the same treatment
    on their resume paths ... including re-activating all their interfaces.

Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and
updates the Kconfig to match the new definition of USB_SUSPEND:  it provides
(a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream
from any device configuration which supports it.

This calls for minor followup patches for most HCDs (and their PCI glue).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/usb/core/Kconfig |   11 ++-
 drivers/usb/core/hub.c   |  163 +++++++++++++++++++++++++----------------------
 2 files changed, 97 insertions(+), 77 deletions(-)
2005-10-28 16:47:40 -07:00
..
atm
class [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed 2005-10-28 16:47:37 -07:00
core [PATCH] root hub updates (greater half) 2005-10-28 16:47:40 -07:00
gadget Merge ../bleed-2.6 2005-10-28 10:13:16 -07:00
host [PATCH] all HCDs provide root hub suspend/resume methods 2005-10-28 16:47:40 -07:00
image [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed 2005-10-28 16:47:37 -07:00
input [PATCH] usb_interface power state 2005-10-28 16:47:38 -07:00
media [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed 2005-10-28 16:47:37 -07:00
misc [PATCH] usb_interface power state 2005-10-28 16:47:38 -07:00
mon
net [PATCH] usb_interface power state 2005-10-28 16:47:38 -07:00
serial [PATCH] USB: ftdi: Artemis and ATIK based USB astronomical CCD cameras 2005-10-28 16:47:37 -07:00
storage
Kconfig
Makefile [PATCH] USB: move handoff code 2005-10-28 16:47:38 -07:00
README
usb-skeleton.c [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed 2005-10-28 16:47:37 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
input/		- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
media/		- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.