android_kernel_xiaomi_sm7250/arch/um/sys-i386/signal.c
Jeff Dike 98c18238f1 [PATCH] uml: fix segfault on signal delivery
This fixes a process segfault where a signal was being delivered such that a
new stack page needed to be allocated to hold the signal frame.  This was
tripping some logic in the page fault handler which wouldn't allocate the page
if the faulting address was more that 32 bytes lower than the current stack
pointer.  Since a signal frame is greater than 32 bytes, this exercised that
case.

It's fixed by updating the SP in the pt_regs before starting to copy the
signal frame.  Since those are the registers that will be copied on to the
stack, we have to be careful to put the original SP, not the new one which
points to the signal frame, on the stack.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:38 -08:00

406 lines
12 KiB
C

/*
* Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
* Licensed under the GPL
*/
#include "linux/signal.h"
#include "linux/ptrace.h"
#include "asm/current.h"
#include "asm/ucontext.h"
#include "asm/uaccess.h"
#include "asm/unistd.h"
#include "frame_kern.h"
#include "sigcontext.h"
#include "registers.h"
#include "mode.h"
#ifdef CONFIG_MODE_SKAS
#include "skas.h"
static int copy_sc_from_user_skas(struct pt_regs *regs,
struct sigcontext *from)
{
struct sigcontext sc;
unsigned long fpregs[HOST_FP_SIZE];
int err;
err = copy_from_user(&sc, from, sizeof(sc));
err |= copy_from_user(fpregs, sc.fpstate, sizeof(fpregs));
if(err)
return(err);
REGS_GS(regs->regs.skas.regs) = sc.gs;
REGS_FS(regs->regs.skas.regs) = sc.fs;
REGS_ES(regs->regs.skas.regs) = sc.es;
REGS_DS(regs->regs.skas.regs) = sc.ds;
REGS_EDI(regs->regs.skas.regs) = sc.edi;
REGS_ESI(regs->regs.skas.regs) = sc.esi;
REGS_EBP(regs->regs.skas.regs) = sc.ebp;
REGS_SP(regs->regs.skas.regs) = sc.esp;
REGS_EBX(regs->regs.skas.regs) = sc.ebx;
REGS_EDX(regs->regs.skas.regs) = sc.edx;
REGS_ECX(regs->regs.skas.regs) = sc.ecx;
REGS_EAX(regs->regs.skas.regs) = sc.eax;
REGS_IP(regs->regs.skas.regs) = sc.eip;
REGS_CS(regs->regs.skas.regs) = sc.cs;
REGS_EFLAGS(regs->regs.skas.regs) = sc.eflags;
REGS_SS(regs->regs.skas.regs) = sc.ss;
err = restore_fp_registers(userspace_pid[0], fpregs);
if(err < 0){
printk("copy_sc_from_user_skas - PTRACE_SETFPREGS failed, "
"errno = %d\n", err);
return(1);
}
return(0);
}
int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp,
struct pt_regs *regs, unsigned long sp)
{
struct sigcontext sc;
unsigned long fpregs[HOST_FP_SIZE];
struct faultinfo * fi = &current->thread.arch.faultinfo;
int err;
sc.gs = REGS_GS(regs->regs.skas.regs);
sc.fs = REGS_FS(regs->regs.skas.regs);
sc.es = REGS_ES(regs->regs.skas.regs);
sc.ds = REGS_DS(regs->regs.skas.regs);
sc.edi = REGS_EDI(regs->regs.skas.regs);
sc.esi = REGS_ESI(regs->regs.skas.regs);
sc.ebp = REGS_EBP(regs->regs.skas.regs);
sc.esp = sp;
sc.ebx = REGS_EBX(regs->regs.skas.regs);
sc.edx = REGS_EDX(regs->regs.skas.regs);
sc.ecx = REGS_ECX(regs->regs.skas.regs);
sc.eax = REGS_EAX(regs->regs.skas.regs);
sc.eip = REGS_IP(regs->regs.skas.regs);
sc.cs = REGS_CS(regs->regs.skas.regs);
sc.eflags = REGS_EFLAGS(regs->regs.skas.regs);
sc.esp_at_signal = regs->regs.skas.regs[UESP];
sc.ss = regs->regs.skas.regs[SS];
sc.cr2 = fi->cr2;
sc.err = fi->error_code;
sc.trapno = fi->trap_no;
err = save_fp_registers(userspace_pid[0], fpregs);
if(err < 0){
printk("copy_sc_to_user_skas - PTRACE_GETFPREGS failed, "
"errno = %d\n", err);
return(1);
}
to_fp = (to_fp ? to_fp : (struct _fpstate *) (to + 1));
sc.fpstate = to_fp;
if(err)
return(err);
return(copy_to_user(to, &sc, sizeof(sc)) ||
copy_to_user(to_fp, fpregs, sizeof(fpregs)));
}
#endif
#ifdef CONFIG_MODE_TT
/* These copy a sigcontext to/from userspace. They copy the fpstate pointer,
* blowing away the old, good one. So, that value is saved, and then restored
* after the sigcontext copy. In copy_from, the variable holding the saved
* fpstate pointer, and the sigcontext that it should be restored to are both
* in the kernel, so we can just restore using an assignment. In copy_to, the
* saved pointer is in the kernel, but the sigcontext is in userspace, so we
* copy_to_user it.
*/
int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from,
int fpsize)
{
struct _fpstate *to_fp, *from_fp;
unsigned long sigs;
int err;
to_fp = to->fpstate;
sigs = to->oldmask;
err = copy_from_user(to, from, sizeof(*to));
from_fp = to->fpstate;
to->oldmask = sigs;
to->fpstate = to_fp;
if(to_fp != NULL)
err |= copy_from_user(to_fp, from_fp, fpsize);
return(err);
}
int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp,
struct sigcontext *from, int fpsize, unsigned long sp)
{
struct _fpstate *to_fp, *from_fp;
int err;
to_fp = (fp ? fp : (struct _fpstate *) (to + 1));
from_fp = from->fpstate;
err = copy_to_user(to, from, sizeof(*to));
/* The SP in the sigcontext is the updated one for the signal
* delivery. The sp passed in is the original, and this needs
* to be restored, so we stick it in separately.
*/
err |= copy_to_user(&SC_SP(to), sp, sizeof(sp));
if(from_fp != NULL){
err |= copy_to_user(&to->fpstate, &to_fp, sizeof(to->fpstate));
err |= copy_to_user(to_fp, from_fp, fpsize);
}
return err;
}
#endif
static int copy_sc_from_user(struct pt_regs *to, void __user *from)
{
int ret;
ret = CHOOSE_MODE(copy_sc_from_user_tt(UPT_SC(&to->regs), from,
sizeof(struct _fpstate)),
copy_sc_from_user_skas(to, from));
return(ret);
}
static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp,
struct pt_regs *from, unsigned long sp)
{
return(CHOOSE_MODE(copy_sc_to_user_tt(to, fp, UPT_SC(&from->regs),
sizeof(*fp), sp),
copy_sc_to_user_skas(to, fp, from, sp)));
}
static int copy_ucontext_to_user(struct ucontext *uc, struct _fpstate *fp,
sigset_t *set, unsigned long sp)
{
int err = 0;
err |= put_user(current->sas_ss_sp, &uc->uc_stack.ss_sp);
err |= put_user(sas_ss_flags(sp), &uc->uc_stack.ss_flags);
err |= put_user(current->sas_ss_size, &uc->uc_stack.ss_size);
err |= copy_sc_to_user(&uc->uc_mcontext, fp, &current->thread.regs, sp);
err |= copy_to_user(&uc->uc_sigmask, set, sizeof(*set));
return(err);
}
struct sigframe
{
char *pretcode;
int sig;
struct sigcontext sc;
struct _fpstate fpstate;
unsigned long extramask[_NSIG_WORDS-1];
char retcode[8];
};
struct rt_sigframe
{
char *pretcode;
int sig;
struct siginfo *pinfo;
void *puc;
struct siginfo info;
struct ucontext uc;
struct _fpstate fpstate;
char retcode[8];
};
int setup_signal_stack_sc(unsigned long stack_top, int sig,
struct k_sigaction *ka, struct pt_regs *regs,
sigset_t *mask)
{
struct sigframe __user *frame;
void *restorer;
unsigned long save_sp = PT_REGS_SP(regs);
int err = 0;
stack_top &= -8UL;
frame = (struct sigframe *) stack_top - 1;
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return 1;
restorer = (void *) frame->retcode;
if(ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
/* Update SP now because the page fault handler refuses to extend
* the stack if the faulting address is too far below the current
* SP, which frame now certainly is. If there's an error, the original
* value is restored on the way out.
* When writing the sigcontext to the stack, we have to write the
* original value, so that's passed to copy_sc_to_user, which does
* the right thing with it.
*/
PT_REGS_SP(regs) = (unsigned long) frame;
err |= __put_user(restorer, &frame->pretcode);
err |= __put_user(sig, &frame->sig);
err |= copy_sc_to_user(&frame->sc, NULL, regs, save_sp);
err |= __put_user(mask->sig[0], &frame->sc.oldmask);
if (_NSIG_WORDS > 1)
err |= __copy_to_user(&frame->extramask, &mask->sig[1],
sizeof(frame->extramask));
/*
* This is popl %eax ; movl $,%eax ; int $0x80
*
* WE DO NOT USE IT ANY MORE! It's only left here for historical
* reasons and because gdb uses it as a signature to notice
* signal handler stack frames.
*/
err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
err |= __put_user(__NR_sigreturn, (int __user *)(frame->retcode+2));
err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
if(err)
goto err;
PT_REGS_SP(regs) = (unsigned long) frame;
PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler;
PT_REGS_EAX(regs) = (unsigned long) sig;
PT_REGS_EDX(regs) = (unsigned long) 0;
PT_REGS_ECX(regs) = (unsigned long) 0;
if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED))
ptrace_notify(SIGTRAP);
return 0;
err:
PT_REGS_SP(regs) = save_sp;
return err;
}
int setup_signal_stack_si(unsigned long stack_top, int sig,
struct k_sigaction *ka, struct pt_regs *regs,
siginfo_t *info, sigset_t *mask)
{
struct rt_sigframe __user *frame;
void *restorer;
unsigned long save_sp = PT_REGS_SP(regs);
int err = 0;
stack_top &= -8UL;
frame = (struct rt_sigframe *) stack_top - 1;
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
return 1;
restorer = (void *) frame->retcode;
if(ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
/* See comment above about why this is here */
PT_REGS_SP(regs) = (unsigned long) frame;
err |= __put_user(restorer, &frame->pretcode);
err |= __put_user(sig, &frame->sig);
err |= __put_user(&frame->info, &frame->pinfo);
err |= __put_user(&frame->uc, &frame->puc);
err |= copy_siginfo_to_user(&frame->info, info);
err |= copy_ucontext_to_user(&frame->uc, &frame->fpstate, mask,
save_sp);
/*
* This is movl $,%eax ; int $0x80
*
* WE DO NOT USE IT ANY MORE! It's only left here for historical
* reasons and because gdb uses it as a signature to notice
* signal handler stack frames.
*/
err |= __put_user(0xb8, (char __user *)(frame->retcode+0));
err |= __put_user(__NR_rt_sigreturn, (int __user *)(frame->retcode+1));
err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
if(err)
goto err;
PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler;
PT_REGS_EAX(regs) = (unsigned long) sig;
PT_REGS_EDX(regs) = (unsigned long) &frame->info;
PT_REGS_ECX(regs) = (unsigned long) &frame->uc;
if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED))
ptrace_notify(SIGTRAP);
return 0;
err:
PT_REGS_SP(regs) = save_sp;
return err;
}
long sys_sigreturn(struct pt_regs regs)
{
unsigned long sp = PT_REGS_SP(&current->thread.regs);
struct sigframe __user *frame = (struct sigframe *)(sp - 8);
sigset_t set;
struct sigcontext __user *sc = &frame->sc;
unsigned long __user *oldmask = &sc->oldmask;
unsigned long __user *extramask = frame->extramask;
int sig_size = (_NSIG_WORDS - 1) * sizeof(unsigned long);
if(copy_from_user(&set.sig[0], oldmask, sizeof(set.sig[0])) ||
copy_from_user(&set.sig[1], extramask, sig_size))
goto segfault;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if(copy_sc_from_user(&current->thread.regs, sc))
goto segfault;
/* Avoid ERESTART handling */
PT_REGS_SYSCALL_NR(&current->thread.regs) = -1;
return(PT_REGS_SYSCALL_RET(&current->thread.regs));
segfault:
force_sig(SIGSEGV, current);
return 0;
}
long sys_rt_sigreturn(struct pt_regs regs)
{
unsigned long __user sp = PT_REGS_SP(&current->thread.regs);
struct rt_sigframe __user *frame = (struct rt_sigframe *) (sp - 4);
sigset_t set;
struct ucontext __user *uc = &frame->uc;
int sig_size = _NSIG_WORDS * sizeof(unsigned long);
if(copy_from_user(&set, &uc->uc_sigmask, sig_size))
goto segfault;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if(copy_sc_from_user(&current->thread.regs, &uc->uc_mcontext))
goto segfault;
/* Avoid ERESTART handling */
PT_REGS_SYSCALL_NR(&current->thread.regs) = -1;
return(PT_REGS_SYSCALL_RET(&current->thread.regs));
segfault:
force_sig(SIGSEGV, current);
return 0;
}
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* Emacs will notice this stuff at the end of the file and automatically
* adjust the settings for this buffer only. This must remain at the end
* of the file.
* ---------------------------------------------------------------------------
* Local variables:
* c-file-style: "linux"
* End:
*/