R0dn3yS/android_kernel_xiaomi_sm7250
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
dc90e95f31
android_kernel_xiaomi_sm7250/arch/ia64/hp/sim/simserial.c
Kenji Kaneshige 3b5cc09033 [IA64] assign_irq_vector() should not panic 
Current assign_irq_vector() will panic if interrupt vectors is running
out. But I think how to handle the case of lack of interrupt vectors
should be handled by the caller of this function. For example, some
PCI devices can raise the interrupt signal via both MSI and I/O
APIC. So even if the driver for these device fails to allocate a
vector for MSI, the driver still has a chance to use I/O APIC based
interrupt. But currently there is no chance for these driver to use
I/O APIC based interrupt because kernel will panic when
assign_irq_vector() fails to allocate interrupt vector.

The following patch changes assign_irq_vector() for ia64 to return
-ENOSPC on error instead of panic (as i386 and x86_64 versions do).

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-11 10:30:07 -07:00

1042 lines
26 KiB
C
Raw Blame History

/*
* Simulated Serial Driver (fake serial)
*
* This driver is mostly used for bringup purposes and will go away.
* It has a strong dependency on the system console. All outputs
* are rerouted to the same facility as the one used by printk which, in our
* case means sys_sim.c console (goes via the simulator). The code hereafter
* is completely leveraged from the serial.c driver.
*
* Copyright (C) 1999-2000, 2002-2003 Hewlett-Packard Co
* Stephane Eranian <eranian@hpl.hp.com>
* David Mosberger-Tang <davidm@hpl.hp.com>
*
* 02/04/00 D. Mosberger Merged in serial.c bug fixes in rs_close().
* 02/25/00 D. Mosberger Synced up with 2.3.99pre-5 version of serial.c.
* 07/30/02 D. Mosberger Replace sti()/cli() with explicit spinlocks & local irq masking
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/major.h>
#include <linux/fcntl.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/console.h>
#include <linux/module.h>
#include <linux/serial.h>
#include <linux/serialP.h>
#include <linux/sysrq.h>
#include <asm/irq.h>
#include <asm/hw_irq.h>
#include <asm/uaccess.h>
#ifdef CONFIG_KDB
# include <linux/kdb.h>
#endif
#undef SIMSERIAL_DEBUG /* define this to get some debug information */
#define KEYBOARD_INTR 3 /* must match with simulator! */
#define NR_PORTS 1 /* only one port for now */
#define SERIAL_INLINE 1
#ifdef SERIAL_INLINE
#define _INLINE_ inline
#endif
#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT)
#define SSC_GETCHAR 21
extern long ia64_ssc (long, long, long, long, int);
extern void ia64_ssc_connect_irq (long intr, long irq);
static char *serial_name = "SimSerial driver";
static char *serial_version = "0.6";
/*
* This has been extracted from asm/serial.h. We need one eventually but
* I don't know exactly what we're going to put in it so just fake one
* for now.
*/
#define BASE_BAUD ( 1843200 / 16 )
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
/*
* Most of the values here are meaningless to this particular driver.
* However some values must be preserved for the code (leveraged from serial.c
* to work correctly).
* port must not be 0
* type must not be UNKNOWN
* So I picked arbitrary (guess from where?) values instead
*/
static struct serial_state rs_table[NR_PORTS]={
/* UART CLK PORT IRQ FLAGS */
{ 0, BASE_BAUD, 0x3F8, 0, STD_COM_FLAGS,0,PORT_16550 } /* ttyS0 */
};
/*
* Just for the fun of it !
*/
static struct serial_uart_config uart_config[] = {
{ "unknown", 1, 0 },
{ "8250", 1, 0 },
{ "16450", 1, 0 },
{ "16550", 1, 0 },
{ "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
{ "cirrus", 1, 0 },
{ "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
{ "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO |
UART_STARTECH },
{ "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO},
{ 0, 0}
};
struct tty_driver *hp_simserial_driver;
static struct async_struct *IRQ_ports[NR_IRQS];
static struct console *console;
static unsigned char *tmp_buf;
static DECLARE_MUTEX(tmp_buf_sem);
extern struct console *console_drivers; /* from kernel/printk.c */
/*
* ------------------------------------------------------------
* rs_stop() and rs_start()
*
* This routines are called before setting or resetting tty->stopped.
* They enable or disable transmitter interrupts, as necessary.
* ------------------------------------------------------------
*/
static void rs_stop(struct tty_struct *tty)
{
#ifdef SIMSERIAL_DEBUG
printk("rs_stop: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n",
tty->stopped, tty->hw_stopped, tty->flow_stopped);
#endif
}
static void rs_start(struct tty_struct *tty)
{
#if SIMSERIAL_DEBUG
printk("rs_start: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n",
tty->stopped, tty->hw_stopped, tty->flow_stopped);
#endif
}
static void receive_chars(struct tty_struct *tty, struct pt_regs *regs)
{
unsigned char ch;
static unsigned char seen_esc = 0;
while ( (ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR)) ) {
if ( ch == 27 && seen_esc == 0 ) {
seen_esc = 1;
continue;
} else {
if ( seen_esc==1 && ch == 'O' ) {
seen_esc = 2;
continue;
} else if ( seen_esc == 2 ) {
if ( ch == 'P' ) /* F1 */
show_state();
#ifdef CONFIG_MAGIC_SYSRQ
if ( ch == 'S' ) { /* F4 */
do
ch = ia64_ssc(0, 0, 0, 0,
SSC_GETCHAR);
while (!ch);
handle_sysrq(ch, regs, NULL);
}
#endif
seen_esc = 0;
continue;
}
}
seen_esc = 0;
if (tty->flip.count >= TTY_FLIPBUF_SIZE) break;
*tty->flip.char_buf_ptr = ch;
*tty->flip.flag_buf_ptr = 0;
tty->flip.flag_buf_ptr++;
tty->flip.char_buf_ptr++;
tty->flip.count++;
}
tty_flip_buffer_push(tty);
}
/*
* This is the serial driver's interrupt routine for a single port
*/
static irqreturn_t rs_interrupt_single(int irq, void *dev_id, struct pt_regs * regs)
{
struct async_struct * info;
/*
* I don't know exactly why they don't use the dev_id opaque data
* pointer instead of this extra lookup table
*/
info = IRQ_ports[irq];
if (!info || !info->tty) {
printk(KERN_INFO "simrs_interrupt_single: info|tty=0 info=%p problem\n", info);
return IRQ_NONE;
}
/*
* pretty simple in our case, because we only get interrupts
* on inbound traffic
*/
receive_chars(info->tty, regs);
return IRQ_HANDLED;
}
/*
* -------------------------------------------------------------------
* Here ends the serial interrupt routines.
* -------------------------------------------------------------------
*/
#if 0
/*
* not really used in our situation so keep them commented out for now
*/
static DECLARE_TASK_QUEUE(tq_serial); /* used to be at the top of the file */
static void do_serial_bh(void)
{
run_task_queue(&tq_serial);
printk(KERN_ERR "do_serial_bh: called\n");
}
#endif
static void do_softint(void *private_)
{
printk(KERN_ERR "simserial: do_softint called\n");
}
static void rs_put_char(struct tty_struct *tty, unsigned char ch)
{
struct async_struct *info = (struct async_struct *)tty->driver_data;
unsigned long flags;
if (!tty || !info->xmit.buf) return;
local_irq_save(flags);
if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) == 0) {
local_irq_restore(flags);
return;
}
info->xmit.buf[info->xmit.head] = ch;
info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1);
local_irq_restore(flags);
}
static _INLINE_ void transmit_chars(struct async_struct *info, int *intr_done)
{
int count;
unsigned long flags;
local_irq_save(flags);
if (info->x_char) {
char c = info->x_char;
console->write(console, &c, 1);
info->state->icount.tx++;
info->x_char = 0;
goto out;
}
if (info->xmit.head == info->xmit.tail || info->tty->stopped || info->tty->hw_stopped) {
#ifdef SIMSERIAL_DEBUG
printk("transmit_chars: head=%d, tail=%d, stopped=%d\n",
info->xmit.head, info->xmit.tail, info->tty->stopped);
#endif
goto out;
}
/*
* We removed the loop and try to do it in to chunks. We need
* 2 operations maximum because it's a ring buffer.
*
* First from current to tail if possible.
* Then from the beginning of the buffer until necessary
*/
count = min(CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE),
SERIAL_XMIT_SIZE - info->xmit.tail);
console->write(console, info->xmit.buf+info->xmit.tail, count);
info->xmit.tail = (info->xmit.tail+count) & (SERIAL_XMIT_SIZE-1);
/*
* We have more at the beginning of the buffer
*/
count = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
if (count) {
console->write(console, info->xmit.buf, count);
info->xmit.tail += count;
}
out:
local_irq_restore(flags);
}
static void rs_flush_chars(struct tty_struct *tty)
{
struct async_struct *info = (struct async_struct *)tty->driver_data;
if (info->xmit.head == info->xmit.tail || tty->stopped || tty->hw_stopped ||
!info->xmit.buf)
return;
transmit_chars(info, NULL);
}
static int rs_write(struct tty_struct * tty,
const unsigned char *buf, int count)
{
int c, ret = 0;
struct async_struct *info = (struct async_struct *)tty->driver_data;
unsigned long flags;
if (!tty || !info->xmit.buf || !tmp_buf) return 0;
local_irq_save(flags);
while (1) {
c = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
if (count < c)
c = count;
if (c <= 0) {
break;
}
memcpy(info->xmit.buf + info->xmit.head, buf, c);
info->xmit.head = ((info->xmit.head + c) &
(SERIAL_XMIT_SIZE-1));
buf += c;
count -= c;
ret += c;
}
local_irq_restore(flags);
/*
* Hey, we transmit directly from here in our case
*/
if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE)
&& !tty->stopped && !tty->hw_stopped) {
transmit_chars(info, NULL);
}
return ret;
}
static int rs_write_room(struct tty_struct *tty)
{
struct async_struct *info = (struct async_struct *)tty->driver_data;
return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
}
static int rs_chars_in_buffer(struct tty_struct *tty)
{
struct async_struct *info = (struct async_struct *)tty->driver_data;
return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
}
static void rs_flush_buffer(struct tty_struct *tty)
{
struct async_struct *info = (struct async_struct *)tty->driver_data;
unsigned long flags;
local_irq_save(flags);
info->xmit.head = info->xmit.tail = 0;
local_irq_restore(flags);
wake_up_interruptible(&tty->write_wait);
if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
tty->ldisc.write_wakeup)
(tty->ldisc.write_wakeup)(tty);
}
/*
* This function is used to send a high-priority XON/XOFF character to
* the device
*/
static void rs_send_xchar(struct tty_struct *tty, char ch)
{
struct async_struct *info = (struct async_struct *)tty->driver_data;
info->x_char = ch;
if (ch) {
/*
* I guess we could call console->write() directly but
* let's do that for now.
*/
transmit_chars(info, NULL);
}
}
/*
* ------------------------------------------------------------
* rs_throttle()
*
* This routine is called by the upper-layer tty layer to signal that
* incoming characters should be throttled.
* ------------------------------------------------------------
*/
static void rs_throttle(struct tty_struct * tty)
{
if (I_IXOFF(tty)) rs_send_xchar(tty, STOP_CHAR(tty));
printk(KERN_INFO "simrs_throttle called\n");
}
static void rs_unthrottle(struct tty_struct * tty)
{
struct async_struct *info = (struct async_struct *)tty->driver_data;
if (I_IXOFF(tty)) {
if (info->x_char)
info->x_char = 0;
else
rs_send_xchar(tty, START_CHAR(tty));
}
printk(KERN_INFO "simrs_unthrottle called\n");
}
/*
* rs_break() --- routine which turns the break handling on or off
*/
static void rs_break(struct tty_struct *tty, int break_state)
{
}
static int rs_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
(cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
(cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
switch (cmd) {
case TIOCMGET:
printk(KERN_INFO "rs_ioctl: TIOCMGET called\n");
return -EINVAL;
case TIOCMBIS:
case TIOCMBIC:
case TIOCMSET:
printk(KERN_INFO "rs_ioctl: TIOCMBIS/BIC/SET called\n");
return -EINVAL;
case TIOCGSERIAL:
printk(KERN_INFO "simrs_ioctl TIOCGSERIAL called\n");
return 0;
case TIOCSSERIAL:
printk(KERN_INFO "simrs_ioctl TIOCSSERIAL called\n");
return 0;
case TIOCSERCONFIG:
printk(KERN_INFO "rs_ioctl: TIOCSERCONFIG called\n");
return -EINVAL;
case TIOCSERGETLSR: /* Get line status register */
printk(KERN_INFO "rs_ioctl: TIOCSERGETLSR called\n");
return -EINVAL;
case TIOCSERGSTRUCT:
printk(KERN_INFO "rs_ioctl: TIOCSERGSTRUCT called\n");
#if 0
if (copy_to_user((struct async_struct *) arg,
info, sizeof(struct async_struct)))
return -EFAULT;
#endif
return 0;
/*
* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
* - mask passed in arg for lines of interest
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
* Caller should use TIOCGICOUNT to see which one it was
*/
case TIOCMIWAIT:
printk(KERN_INFO "rs_ioctl: TIOCMIWAIT: called\n");
return 0;
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
case TIOCGICOUNT:
printk(KERN_INFO "rs_ioctl: TIOCGICOUNT called\n");
return 0;
case TIOCSERGWILD:
case TIOCSERSWILD:
/* "setserial -W" is called in Debian boot */
printk (KERN_INFO "TIOCSER?WILD ioctl obsolete, ignored.\n");
return 0;
default:
return -ENOIOCTLCMD;
}
return 0;
}
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
{
unsigned int cflag = tty->termios->c_cflag;
if ( (cflag == old_termios->c_cflag)
&& ( RELEVANT_IFLAG(tty->termios->c_iflag)
== RELEVANT_IFLAG(old_termios->c_iflag)))
return;
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
rs_start(tty);
}
}
/*
* This routine will shutdown a serial port; interrupts are disabled, and
* DTR is dropped if the hangup on close termio flag is on.
*/
static void shutdown(struct async_struct * info)
{
unsigned long flags;
struct serial_state *state;
int retval;
if (!(info->flags & ASYNC_INITIALIZED)) return;
state = info->state;
#ifdef SIMSERIAL_DEBUG
printk("Shutting down serial port %d (irq %d)....", info->line,
state->irq);
#endif
local_irq_save(flags);
{
/*
* First unlink the serial port from the IRQ chain...
*/
if (info->next_port)
info->next_port->prev_port = info->prev_port;
if (info->prev_port)
info->prev_port->next_port = info->next_port;
else
IRQ_ports[state->irq] = info->next_port;
/*
* Free the IRQ, if necessary
*/
if (state->irq && (!IRQ_ports[state->irq] ||
!IRQ_ports[state->irq]->next_port)) {
if (IRQ_ports[state->irq]) {
free_irq(state->irq, NULL);
retval = request_irq(state->irq, rs_interrupt_single,
IRQ_T(info), "serial", NULL);
if (retval)
printk(KERN_ERR "serial shutdown: request_irq: error %d"
" Couldn't reacquire IRQ.\n", retval);
} else
free_irq(state->irq, NULL);
}
if (info->xmit.buf) {
free_page((unsigned long) info->xmit.buf);
info->xmit.buf = 0;
}
if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags);
info->flags &= ~ASYNC_INITIALIZED;
}
local_irq_restore(flags);
}
/*
* ------------------------------------------------------------
* rs_close()
*
* This routine is called when the serial port gets closed. First, we
* wait for the last remaining data to be sent. Then, we unlink its
* async structure from the interrupt chain if necessary, and we free
* that IRQ if nothing is left in the chain.
* ------------------------------------------------------------
*/
static void rs_close(struct tty_struct *tty, struct file * filp)
{
struct async_struct * info = (struct async_struct *)tty->driver_data;
struct serial_state *state;
unsigned long flags;
if (!info ) return;
state = info->state;
local_irq_save(flags);
if (tty_hung_up_p(filp)) {
#ifdef SIMSERIAL_DEBUG
printk("rs_close: hung_up\n");
#endif
local_irq_restore(flags);
return;
}
#ifdef SIMSERIAL_DEBUG
printk("rs_close ttys%d, count = %d\n", info->line, state->count);
#endif
if ((tty->count == 1) && (state->count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty
* structure will be freed. state->count should always
* be one in these conditions. If it's greater than
* one, we've got real problems, since it means the
* serial port won't be shutdown.
*/
printk(KERN_ERR "rs_close: bad serial port count; tty->count is 1, "
"state->count is %d\n", state->count);
state->count = 1;
}
if (--state->count < 0) {
printk(KERN_ERR "rs_close: bad serial port count for ttys%d: %d\n",
info->line, state->count);
state->count = 0;
}
if (state->count) {
local_irq_restore(flags);
return;
}
info->flags |= ASYNC_CLOSING;
local_irq_restore(flags);
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
*/
shutdown(info);
if (tty->driver->flush_buffer) tty->driver->flush_buffer(tty);
if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty);
info->event = 0;
info->tty = 0;
if (info->blocked_open) {
if (info->close_delay) {
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(info->close_delay);
}
wake_up_interruptible(&info->open_wait);
}
info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
wake_up_interruptible(&info->close_wait);
}
/*
* rs_wait_until_sent() --- wait until the transmitter is empty
*/
static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
{
}
/*
* rs_hangup() --- called by tty_hangup() when a hangup is signaled.
*/
static void rs_hangup(struct tty_struct *tty)
{
struct async_struct * info = (struct async_struct *)tty->driver_data;
struct serial_state *state = info->state;
#ifdef SIMSERIAL_DEBUG
printk("rs_hangup: called\n");
#endif
state = info->state;
rs_flush_buffer(tty);
if (info->flags & ASYNC_CLOSING)
return;
shutdown(info);
info->event = 0;
state->count = 0;
info->flags &= ~ASYNC_NORMAL_ACTIVE;
info->tty = 0;
wake_up_interruptible(&info->open_wait);
}
static int get_async_struct(int line, struct async_struct **ret_info)
{
struct async_struct *info;
struct serial_state *sstate;
sstate = rs_table + line;
sstate->count++;
if (sstate->info) {
*ret_info = sstate->info;
return 0;
}
info = kmalloc(sizeof(struct async_struct), GFP_KERNEL);
if (!info) {
sstate->count--;
return -ENOMEM;
}
memset(info, 0, sizeof(struct async_struct));
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
init_waitqueue_head(&info->delta_msr_wait);
info->magic = SERIAL_MAGIC;
info->port = sstate->port;
info->flags = sstate->flags;
info->xmit_fifo_size = sstate->xmit_fifo_size;
info->line = line;
INIT_WORK(&info->work, do_softint, info);
info->state = sstate;
if (sstate->info) {
kfree(info);
*ret_info = sstate->info;
return 0;
}
*ret_info = sstate->info = info;
return 0;
}
static int
startup(struct async_struct *info)
{
unsigned long flags;
int retval=0;
irqreturn_t (*handler)(int, void *, struct pt_regs *);
struct serial_state *state= info->state;
unsigned long page;
page = get_zeroed_page(GFP_KERNEL);
if (!page)
return -ENOMEM;
local_irq_save(flags);
if (info->flags & ASYNC_INITIALIZED) {
free_page(page);
goto errout;
}
if (!state->port || !state->type) {
if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags);
free_page(page);
goto errout;
}
if (info->xmit.buf)
free_page(page);
else
info->xmit.buf = (unsigned char *) page;
#ifdef SIMSERIAL_DEBUG
printk("startup: ttys%d (irq %d)...", info->line, state->irq);
#endif
/*
* Allocate the IRQ if necessary
*/
if (state->irq && (!IRQ_ports[state->irq] ||
!IRQ_ports[state->irq]->next_port)) {
if (IRQ_ports[state->irq]) {
retval = -EBUSY;
goto errout;
} else
handler = rs_interrupt_single;
retval = request_irq(state->irq, handler, IRQ_T(info), "simserial", NULL);
if (retval) {
if (capable(CAP_SYS_ADMIN)) {
if (info->tty)
set_bit(TTY_IO_ERROR,
&info->tty->flags);
retval = 0;
}
goto errout;
}
}
/*
* Insert serial port into IRQ chain.
*/
info->prev_port = 0;
info->next_port = IRQ_ports[state->irq];
if (info->next_port)
info->next_port->prev_port = info;
IRQ_ports[state->irq] = info;
if (info->tty) clear_bit(TTY_IO_ERROR, &info->tty->flags);
info->xmit.head = info->xmit.tail = 0;
#if 0
/*
* Set up serial timers...
*/
timer_table[RS_TIMER].expires = jiffies + 2*HZ/100;
timer_active |= 1 << RS_TIMER;
#endif
/*
* Set up the tty->alt_speed kludge
*/
if (info->tty) {
if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
info->tty->alt_speed = 57600;
if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
info->tty->alt_speed = 115200;
if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
info->tty->alt_speed = 230400;
if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
info->tty->alt_speed = 460800;
}
info->flags |= ASYNC_INITIALIZED;
local_irq_restore(flags);
return 0;
errout:
local_irq_restore(flags);
return retval;
}
/*
* This routine is called whenever a serial port is opened. It
* enables interrupts for a serial port, linking in its async structure into
* the IRQ chain. It also performs the serial-specific
* initialization for the tty structure.
*/
static int rs_open(struct tty_struct *tty, struct file * filp)
{
struct async_struct *info;
int retval, line;
unsigned long page;
line = tty->index;
if ((line < 0) || (line >= NR_PORTS))
return -ENODEV;
retval = get_async_struct(line, &info);
if (retval)
return retval;
tty->driver_data = info;
info->tty = tty;
#ifdef SIMSERIAL_DEBUG
printk("rs_open %s, count = %d\n", tty->name, info->state->count);
#endif
info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
if (!tmp_buf) {
page = get_zeroed_page(GFP_KERNEL);
if (!page)
return -ENOMEM;
if (tmp_buf)
free_page(page);
else
tmp_buf = (unsigned char *) page;
}
/*
* If the port is the middle of closing, bail out now
*/
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
if (info->flags & ASYNC_CLOSING)
interruptible_sleep_on(&info->close_wait);
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
#else
return -EAGAIN;
#endif
}
/*
* Start up serial port
*/
retval = startup(info);
if (retval) {
return retval;
}
/*
* figure out which console to use (should be one already)
*/
console = console_drivers;
while (console) {
if ((console->flags & CON_ENABLED) && console->write) break;
console = console->next;
}
#ifdef SIMSERIAL_DEBUG
printk("rs_open ttys%d successful\n", info->line);
#endif
return 0;
}
/*
* /proc fs routines....
*/
static inline int line_info(char *buf, struct serial_state *state)
{
return sprintf(buf, "%d: uart:%s port:%lX irq:%d\n",
state->line, uart_config[state->type].name,
state->port, state->irq);
}
static int rs_read_proc(char *page, char **start, off_t off, int count,
int *eof, void *data)
{
int i, len = 0, l;
off_t begin = 0;
len += sprintf(page, "simserinfo:1.0 driver:%s\n", serial_version);
for (i = 0; i < NR_PORTS && len < 4000; i++) {
l = line_info(page + len, &rs_table[i]);
len += l;
if (len+begin > off+count)
goto done;
if (len+begin < off) {
begin += len;
len = 0;
}
}
*eof = 1;
done:
if (off >= len+begin)
return 0;
*start = page + (begin-off);
return ((count < begin+len-off) ? count : begin+len-off);
}
/*
* ---------------------------------------------------------------------
* rs_init() and friends
*
* rs_init() is called at boot-time to initialize the serial driver.
* ---------------------------------------------------------------------
*/
/*
* This routine prints out the appropriate serial driver version
* number, and identifies which options were configured into this
* driver.
*/
static inline void show_serial_version(void)
{
printk(KERN_INFO "%s version %s with", serial_name, serial_version);
printk(KERN_INFO " no serial options enabled\n");
}
static struct tty_operations hp_ops = {
.open = rs_open,
.close = rs_close,
.write = rs_write,
.put_char = rs_put_char,
.flush_chars = rs_flush_chars,
.write_room = rs_write_room,
.chars_in_buffer = rs_chars_in_buffer,
.flush_buffer = rs_flush_buffer,
.ioctl = rs_ioctl,
.throttle = rs_throttle,
.unthrottle = rs_unthrottle,
.send_xchar = rs_send_xchar,
.set_termios = rs_set_termios,
.stop = rs_stop,
.start = rs_start,
.hangup = rs_hangup,
.break_ctl = rs_break,
.wait_until_sent = rs_wait_until_sent,
.read_proc = rs_read_proc,
};
/*
* The serial driver boot-time initialization code!
*/
static int __init
simrs_init (void)
{
int i, rc;
struct serial_state *state;
if (!ia64_platform_is("hpsim"))
return -ENODEV;
hp_simserial_driver = alloc_tty_driver(1);
if (!hp_simserial_driver)
return -ENOMEM;
show_serial_version();
/* Initialize the tty_driver structure */
hp_simserial_driver->owner = THIS_MODULE;
hp_simserial_driver->driver_name = "simserial";
hp_simserial_driver->name = "ttyS";
hp_simserial_driver->major = TTY_MAJOR;
hp_simserial_driver->minor_start = 64;
hp_simserial_driver->type = TTY_DRIVER_TYPE_SERIAL;
hp_simserial_driver->subtype = SERIAL_TYPE_NORMAL;
hp_simserial_driver->init_termios = tty_std_termios;
hp_simserial_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
hp_simserial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(hp_simserial_driver, &hp_ops);
/*
* Let's have a little bit of fun !
*/
for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
if (state->type == PORT_UNKNOWN) continue;
if (!state->irq) {
if ((rc = assign_irq_vector(AUTO_ASSIGN)) < 0)
panic("%s: out of interrupt vectors!\n",
__FUNCTION__);
state->irq = rc;
ia64_ssc_connect_irq(KEYBOARD_INTR, state->irq);
}
printk(KERN_INFO "ttyS%d at 0x%04lx (irq = %d) is a %s\n",
state->line,
state->port, state->irq,
uart_config[state->type].name);
}
if (tty_register_driver(hp_simserial_driver))
panic("Couldn't register simserial driver\n");
return 0;
}
#ifndef MODULE
__initcall(simrs_init);
#endif
Reference in New Issue View Git Blame Copy Permalink