R0dn3yS/android_kernel_xiaomi_sm7250
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9e625ff8a3
android_kernel_xiaomi_sm7250/sound/pci/emu10k1/emu10k1_main.c
James Courtier-Dutton d83c671fb7 [PATCH] Creative Audigy 2 cardbus: Add IO window wakeup magic 
This adds the magic IO wakeup code for the CardBus version of the
Creative Labs Audigy 2 to the snd-emu10k1 driver.

Without the magic IO enable sequence, reading from the IO region of the
card will fail spectacularly, and the machine will hang.

My next task will be getting the driver to actually play sound without
distortion.

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

[ This is a work-in-progress, but since it avoids a total lockup
  if the emu10k module is loaded on a machine with the cardbus
  card inserted, we're better off with it than without it, even
  if sound quality is bad right now ]

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 16:09:39 -08:00

1088 lines
33 KiB
C
Raw Blame History

/*
* Copyright (c) by Jaroslav Kysela <perex@suse.cz>
* Creative Labs, Inc.
* Routines for control of EMU10K1 chips
*
* Copyright (c) by James Courtier-Dutton <James@superbug.demon.co.uk>
* Added support for Audigy 2 Value.
*
*
* BUGS:
* --
*
* TODO:
* --
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <sound/driver.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <sound/core.h>
#include <sound/emu10k1.h>
#include "p16v.h"
#if 0
MODULE_AUTHOR("Jaroslav Kysela <perex@suse.cz>, Creative Labs, Inc.");
MODULE_DESCRIPTION("Routines for control of EMU10K1 chips");
MODULE_LICENSE("GPL");
#endif
/*************************************************************************
* EMU10K1 init / done
*************************************************************************/
void snd_emu10k1_voice_init(emu10k1_t * emu, int ch)
{
snd_emu10k1_ptr_write(emu, DCYSUSV, ch, 0);
snd_emu10k1_ptr_write(emu, IP, ch, 0);
snd_emu10k1_ptr_write(emu, VTFT, ch, 0xffff);
snd_emu10k1_ptr_write(emu, CVCF, ch, 0xffff);
snd_emu10k1_ptr_write(emu, PTRX, ch, 0);
snd_emu10k1_ptr_write(emu, CPF, ch, 0);
snd_emu10k1_ptr_write(emu, CCR, ch, 0);
snd_emu10k1_ptr_write(emu, PSST, ch, 0);
snd_emu10k1_ptr_write(emu, DSL, ch, 0x10);
snd_emu10k1_ptr_write(emu, CCCA, ch, 0);
snd_emu10k1_ptr_write(emu, Z1, ch, 0);
snd_emu10k1_ptr_write(emu, Z2, ch, 0);
snd_emu10k1_ptr_write(emu, FXRT, ch, 0x32100000);
snd_emu10k1_ptr_write(emu, ATKHLDM, ch, 0);
snd_emu10k1_ptr_write(emu, DCYSUSM, ch, 0);
snd_emu10k1_ptr_write(emu, IFATN, ch, 0xffff);
snd_emu10k1_ptr_write(emu, PEFE, ch, 0);
snd_emu10k1_ptr_write(emu, FMMOD, ch, 0);
snd_emu10k1_ptr_write(emu, TREMFRQ, ch, 24); /* 1 Hz */
snd_emu10k1_ptr_write(emu, FM2FRQ2, ch, 24); /* 1 Hz */
snd_emu10k1_ptr_write(emu, TEMPENV, ch, 0);
/*** these are last so OFF prevents writing ***/
snd_emu10k1_ptr_write(emu, LFOVAL2, ch, 0);
snd_emu10k1_ptr_write(emu, LFOVAL1, ch, 0);
snd_emu10k1_ptr_write(emu, ATKHLDV, ch, 0);
snd_emu10k1_ptr_write(emu, ENVVOL, ch, 0);
snd_emu10k1_ptr_write(emu, ENVVAL, ch, 0);
/* Audigy extra stuffs */
if (emu->audigy) {
snd_emu10k1_ptr_write(emu, 0x4c, ch, 0); /* ?? */
snd_emu10k1_ptr_write(emu, 0x4d, ch, 0); /* ?? */
snd_emu10k1_ptr_write(emu, 0x4e, ch, 0); /* ?? */
snd_emu10k1_ptr_write(emu, 0x4f, ch, 0); /* ?? */
snd_emu10k1_ptr_write(emu, A_FXRT1, ch, 0x03020100);
snd_emu10k1_ptr_write(emu, A_FXRT2, ch, 0x3f3f3f3f);
snd_emu10k1_ptr_write(emu, A_SENDAMOUNTS, ch, 0);
}
}
static int __devinit snd_emu10k1_init(emu10k1_t * emu, int enable_ir)
{
int ch, idx, err;
unsigned int silent_page;
emu->fx8010.itram_size = (16 * 1024)/2;
emu->fx8010.etram_pages.area = NULL;
emu->fx8010.etram_pages.bytes = 0;
/* disable audio and lock cache */
outl(HCFG_LOCKSOUNDCACHE | HCFG_LOCKTANKCACHE_MASK | HCFG_MUTEBUTTONENABLE, emu->port + HCFG);
/* reset recording buffers */
snd_emu10k1_ptr_write(emu, MICBS, 0, ADCBS_BUFSIZE_NONE);
snd_emu10k1_ptr_write(emu, MICBA, 0, 0);
snd_emu10k1_ptr_write(emu, FXBS, 0, ADCBS_BUFSIZE_NONE);
snd_emu10k1_ptr_write(emu, FXBA, 0, 0);
snd_emu10k1_ptr_write(emu, ADCBS, 0, ADCBS_BUFSIZE_NONE);
snd_emu10k1_ptr_write(emu, ADCBA, 0, 0);
/* disable channel interrupt */
outl(0, emu->port + INTE);
snd_emu10k1_ptr_write(emu, CLIEL, 0, 0);
snd_emu10k1_ptr_write(emu, CLIEH, 0, 0);
snd_emu10k1_ptr_write(emu, SOLEL, 0, 0);
snd_emu10k1_ptr_write(emu, SOLEH, 0, 0);
if (emu->audigy){
/* set SPDIF bypass mode */
snd_emu10k1_ptr_write(emu, SPBYPASS, 0, SPBYPASS_FORMAT);
/* enable rear left + rear right AC97 slots */
snd_emu10k1_ptr_write(emu, AC97SLOT, 0, AC97SLOT_REAR_RIGHT | AC97SLOT_REAR_LEFT);
}
/* init envelope engine */
for (ch = 0; ch < NUM_G; ch++) {
emu->voices[ch].emu = emu;
emu->voices[ch].number = ch;
snd_emu10k1_voice_init(emu, ch);
}
/*
* Init to 0x02109204 :
* Clock accuracy = 0 (1000ppm)
* Sample Rate = 2 (48kHz)
* Audio Channel = 1 (Left of 2)
* Source Number = 0 (Unspecified)
* Generation Status = 1 (Original for Cat Code 12)
* Cat Code = 12 (Digital Signal Mixer)
* Mode = 0 (Mode 0)
* Emphasis = 0 (None)
* CP = 1 (Copyright unasserted)
* AN = 0 (Audio data)
* P = 0 (Consumer)
*/
snd_emu10k1_ptr_write(emu, SPCS0, 0,
emu->spdif_bits[0] =
SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 |
SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC |
SPCS_GENERATIONSTATUS | 0x00001200 |
0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT);
snd_emu10k1_ptr_write(emu, SPCS1, 0,
emu->spdif_bits[1] =
SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 |
SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC |
SPCS_GENERATIONSTATUS | 0x00001200 |
0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT);
snd_emu10k1_ptr_write(emu, SPCS2, 0,
emu->spdif_bits[2] =
SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 |
SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC |
SPCS_GENERATIONSTATUS | 0x00001200 |
0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT);
if (emu->card_capabilities->ca0151_chip) { /* audigy2 */
/* Hacks for Alice3 to work independent of haP16V driver */
u32 tmp;
//Setup SRCMulti_I2S SamplingRate
tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0);
tmp &= 0xfffff1ff;
tmp |= (0x2<<9);
snd_emu10k1_ptr_write(emu, A_SPDIF_SAMPLERATE, 0, tmp);
/* Setup SRCSel (Enable Spdif,I2S SRCMulti) */
snd_emu10k1_ptr20_write(emu, SRCSel, 0, 0x14);
/* Setup SRCMulti Input Audio Enable */
/* Use 0xFFFFFFFF to enable P16V sounds. */
snd_emu10k1_ptr20_write(emu, SRCMULTI_ENABLE, 0, 0xFFFFFFFF);
/* Enabled Phased (8-channel) P16V playback */
outl(0x0201, emu->port + HCFG2);
/* Set playback routing. */
snd_emu10k1_ptr20_write(emu, CAPTURE_P16V_SOURCE, 0, 0x78e4);
}
if (emu->card_capabilities->ca0108_chip) { /* audigy2 Value */
/* Hacks for Alice3 to work independent of haP16V driver */
u32 tmp;
snd_printk(KERN_ERR "Audigy2 value:Special config.\n");
//Setup SRCMulti_I2S SamplingRate
tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0);
tmp &= 0xfffff1ff;
tmp |= (0x2<<9);
snd_emu10k1_ptr_write(emu, A_SPDIF_SAMPLERATE, 0, tmp);
/* Setup SRCSel (Enable Spdif,I2S SRCMulti) */
outl(0x600000, emu->port + 0x20);
outl(0x14, emu->port + 0x24);
/* Setup SRCMulti Input Audio Enable */
outl(0x7b0000, emu->port + 0x20);
outl(0xFF000000, emu->port + 0x24);
/* Setup SPDIF Out Audio Enable */
/* The Audigy 2 Value has a separate SPDIF out,
* so no need for a mixer switch
*/
outl(0x7a0000, emu->port + 0x20);
outl(0xFF000000, emu->port + 0x24);
tmp = inl(emu->port + A_IOCFG) & ~0x8; /* Clear bit 3 */
outl(tmp, emu->port + A_IOCFG);
}
/*
* Clear page with silence & setup all pointers to this page
*/
memset(emu->silent_page.area, 0, PAGE_SIZE);
silent_page = emu->silent_page.addr << 1;
for (idx = 0; idx < MAXPAGES; idx++)
((u32 *)emu->ptb_pages.area)[idx] = cpu_to_le32(silent_page | idx);
snd_emu10k1_ptr_write(emu, PTB, 0, emu->ptb_pages.addr);
snd_emu10k1_ptr_write(emu, TCB, 0, 0); /* taken from original driver */
snd_emu10k1_ptr_write(emu, TCBS, 0, 4); /* taken from original driver */
silent_page = (emu->silent_page.addr << 1) | MAP_PTI_MASK;
for (ch = 0; ch < NUM_G; ch++) {
snd_emu10k1_ptr_write(emu, MAPA, ch, silent_page);
snd_emu10k1_ptr_write(emu, MAPB, ch, silent_page);
}
/*
* Hokay, setup HCFG
* Mute Disable Audio = 0
* Lock Tank Memory = 1
* Lock Sound Memory = 0
* Auto Mute = 1
*/
if (emu->audigy) {
if (emu->revision == 4) /* audigy2 */
outl(HCFG_AUDIOENABLE |
HCFG_AC3ENABLE_CDSPDIF |
HCFG_AC3ENABLE_GPSPDIF |
HCFG_AUTOMUTE | HCFG_JOYENABLE, emu->port + HCFG);
else
outl(HCFG_AUTOMUTE | HCFG_JOYENABLE, emu->port + HCFG);
/* FIXME: Remove all these emu->model and replace it with a card recognition parameter,
* e.g. card_capabilities->joystick */
} else if (emu->model == 0x20 ||
emu->model == 0xc400 ||
(emu->model == 0x21 && emu->revision < 6))
outl(HCFG_LOCKTANKCACHE_MASK | HCFG_AUTOMUTE, emu->port + HCFG);
else
// With on-chip joystick
outl(HCFG_LOCKTANKCACHE_MASK | HCFG_AUTOMUTE | HCFG_JOYENABLE, emu->port + HCFG);
if (enable_ir) { /* enable IR for SB Live */
if (emu->audigy) {
unsigned int reg = inl(emu->port + A_IOCFG);
outl(reg | A_IOCFG_GPOUT2, emu->port + A_IOCFG);
udelay(500);
outl(reg | A_IOCFG_GPOUT1 | A_IOCFG_GPOUT2, emu->port + A_IOCFG);
udelay(100);
outl(reg, emu->port + A_IOCFG);
} else {
unsigned int reg = inl(emu->port + HCFG);
outl(reg | HCFG_GPOUT2, emu->port + HCFG);
udelay(500);
outl(reg | HCFG_GPOUT1 | HCFG_GPOUT2, emu->port + HCFG);
udelay(100);
outl(reg, emu->port + HCFG);
}
}
if (emu->audigy) { /* enable analog output */
unsigned int reg = inl(emu->port + A_IOCFG);
outl(reg | A_IOCFG_GPOUT0, emu->port + A_IOCFG);
}
/*
* Initialize the effect engine
*/
if ((err = snd_emu10k1_init_efx(emu)) < 0)
return err;
/*
* Enable the audio bit
*/
outl(inl(emu->port + HCFG) | HCFG_AUDIOENABLE, emu->port + HCFG);
/* Enable analog/digital outs on audigy */
if (emu->audigy) {
outl(inl(emu->port + A_IOCFG) & ~0x44, emu->port + A_IOCFG);
if (emu->card_capabilities->ca0151_chip) { /* audigy2 */
/* Unmute Analog now. Set GPO6 to 1 for Apollo.
* This has to be done after init ALice3 I2SOut beyond 48KHz.
* So, sequence is important. */
outl(inl(emu->port + A_IOCFG) | 0x0040, emu->port + A_IOCFG);
} else if (emu->card_capabilities->ca0108_chip) { /* audigy2 value */
/* Unmute Analog now. */
outl(inl(emu->port + A_IOCFG) | 0x0060, emu->port + A_IOCFG);
} else {
/* Disable routing from AC97 line out to Front speakers */
outl(inl(emu->port + A_IOCFG) | 0x0080, emu->port + A_IOCFG);
}
}
#if 0
{
unsigned int tmp;
/* FIXME: the following routine disables LiveDrive-II !! */
// TOSLink detection
emu->tos_link = 0;
tmp = inl(emu->port + HCFG);
if (tmp & (HCFG_GPINPUT0 | HCFG_GPINPUT1)) {
outl(tmp|0x800, emu->port + HCFG);
udelay(50);
if (tmp != (inl(emu->port + HCFG) & ~0x800)) {
emu->tos_link = 1;
outl(tmp, emu->port + HCFG);
}
}
}
#endif
snd_emu10k1_intr_enable(emu, INTE_PCIERRORENABLE);
emu->reserved_page = (emu10k1_memblk_t *)snd_emu10k1_synth_alloc(emu, 4096);
if (emu->reserved_page)
emu->reserved_page->map_locked = 1;
return 0;
}
static int snd_emu10k1_done(emu10k1_t * emu)
{
int ch;
outl(0, emu->port + INTE);
/*
* Shutdown the chip
*/
for (ch = 0; ch < NUM_G; ch++)
snd_emu10k1_ptr_write(emu, DCYSUSV, ch, 0);
for (ch = 0; ch < NUM_G; ch++) {
snd_emu10k1_ptr_write(emu, VTFT, ch, 0);
snd_emu10k1_ptr_write(emu, CVCF, ch, 0);
snd_emu10k1_ptr_write(emu, PTRX, ch, 0);
snd_emu10k1_ptr_write(emu, CPF, ch, 0);
}
/* reset recording buffers */
snd_emu10k1_ptr_write(emu, MICBS, 0, 0);
snd_emu10k1_ptr_write(emu, MICBA, 0, 0);
snd_emu10k1_ptr_write(emu, FXBS, 0, 0);
snd_emu10k1_ptr_write(emu, FXBA, 0, 0);
snd_emu10k1_ptr_write(emu, FXWC, 0, 0);
snd_emu10k1_ptr_write(emu, ADCBS, 0, ADCBS_BUFSIZE_NONE);
snd_emu10k1_ptr_write(emu, ADCBA, 0, 0);
snd_emu10k1_ptr_write(emu, TCBS, 0, TCBS_BUFFSIZE_16K);
snd_emu10k1_ptr_write(emu, TCB, 0, 0);
if (emu->audigy)
snd_emu10k1_ptr_write(emu, A_DBG, 0, A_DBG_SINGLE_STEP);
else
snd_emu10k1_ptr_write(emu, DBG, 0, EMU10K1_DBG_SINGLE_STEP);
/* disable channel interrupt */
snd_emu10k1_ptr_write(emu, CLIEL, 0, 0);
snd_emu10k1_ptr_write(emu, CLIEH, 0, 0);
snd_emu10k1_ptr_write(emu, SOLEL, 0, 0);
snd_emu10k1_ptr_write(emu, SOLEH, 0, 0);
/* remove reserved page */
if (emu->reserved_page != NULL) {
snd_emu10k1_synth_free(emu, (snd_util_memblk_t *)emu->reserved_page);
emu->reserved_page = NULL;
}
/* disable audio and lock cache */
outl(HCFG_LOCKSOUNDCACHE | HCFG_LOCKTANKCACHE_MASK | HCFG_MUTEBUTTONENABLE, emu->port + HCFG);
snd_emu10k1_ptr_write(emu, PTB, 0, 0);
snd_emu10k1_free_efx(emu);
return 0;
}
/*************************************************************************
* ECARD functional implementation
*************************************************************************/
/* In A1 Silicon, these bits are in the HC register */
#define HOOKN_BIT (1L << 12)
#define HANDN_BIT (1L << 11)
#define PULSEN_BIT (1L << 10)
#define EC_GDI1 (1 << 13)
#define EC_GDI0 (1 << 14)
#define EC_NUM_CONTROL_BITS 20
#define EC_AC3_DATA_SELN 0x0001L
#define EC_EE_DATA_SEL 0x0002L
#define EC_EE_CNTRL_SELN 0x0004L
#define EC_EECLK 0x0008L
#define EC_EECS 0x0010L
#define EC_EESDO 0x0020L
#define EC_TRIM_CSN 0x0040L
#define EC_TRIM_SCLK 0x0080L
#define EC_TRIM_SDATA 0x0100L
#define EC_TRIM_MUTEN 0x0200L
#define EC_ADCCAL 0x0400L
#define EC_ADCRSTN 0x0800L
#define EC_DACCAL 0x1000L
#define EC_DACMUTEN 0x2000L
#define EC_LEDN 0x4000L
#define EC_SPDIF0_SEL_SHIFT 15
#define EC_SPDIF1_SEL_SHIFT 17
#define EC_SPDIF0_SEL_MASK (0x3L << EC_SPDIF0_SEL_SHIFT)
#define EC_SPDIF1_SEL_MASK (0x7L << EC_SPDIF1_SEL_SHIFT)
#define EC_SPDIF0_SELECT(_x) (((_x) << EC_SPDIF0_SEL_SHIFT) & EC_SPDIF0_SEL_MASK)
#define EC_SPDIF1_SELECT(_x) (((_x) << EC_SPDIF1_SEL_SHIFT) & EC_SPDIF1_SEL_MASK)
#define EC_CURRENT_PROM_VERSION 0x01 /* Self-explanatory. This should
* be incremented any time the EEPROM's
* format is changed. */
#define EC_EEPROM_SIZE 0x40 /* ECARD EEPROM has 64 16-bit words */
/* Addresses for special values stored in to EEPROM */
#define EC_PROM_VERSION_ADDR 0x20 /* Address of the current prom version */
#define EC_BOARDREV0_ADDR 0x21 /* LSW of board rev */
#define EC_BOARDREV1_ADDR 0x22 /* MSW of board rev */
#define EC_LAST_PROMFILE_ADDR 0x2f
#define EC_SERIALNUM_ADDR 0x30 /* First word of serial number. The
* can be up to 30 characters in length
* and is stored as a NULL-terminated
* ASCII string. Any unused bytes must be
* filled with zeros */
#define EC_CHECKSUM_ADDR 0x3f /* Location at which checksum is stored */
/* Most of this stuff is pretty self-evident. According to the hardware
* dudes, we need to leave the ADCCAL bit low in order to avoid a DC
* offset problem. Weird.
*/
#define EC_RAW_RUN_MODE (EC_DACMUTEN | EC_ADCRSTN | EC_TRIM_MUTEN | \
EC_TRIM_CSN)
#define EC_DEFAULT_ADC_GAIN 0xC4C4
#define EC_DEFAULT_SPDIF0_SEL 0x0
#define EC_DEFAULT_SPDIF1_SEL 0x4
/**************************************************************************
* @func Clock bits into the Ecard's control latch. The Ecard uses a
* control latch will is loaded bit-serially by toggling the Modem control
* lines from function 2 on the E8010. This function hides these details
* and presents the illusion that we are actually writing to a distinct
* register.
*/
static void snd_emu10k1_ecard_write(emu10k1_t * emu, unsigned int value)
{
unsigned short count;
unsigned int data;
unsigned long hc_port;
unsigned int hc_value;
hc_port = emu->port + HCFG;
hc_value = inl(hc_port) & ~(HOOKN_BIT | HANDN_BIT | PULSEN_BIT);
outl(hc_value, hc_port);
for (count = 0; count < EC_NUM_CONTROL_BITS; count++) {
/* Set up the value */
data = ((value & 0x1) ? PULSEN_BIT : 0);
value >>= 1;
outl(hc_value | data, hc_port);
/* Clock the shift register */
outl(hc_value | data | HANDN_BIT, hc_port);
outl(hc_value | data, hc_port);
}
/* Latch the bits */
outl(hc_value | HOOKN_BIT, hc_port);
outl(hc_value, hc_port);
}
/**************************************************************************
* @func Set the gain of the ECARD's CS3310 Trim/gain controller. The
* trim value consists of a 16bit value which is composed of two
* 8 bit gain/trim values, one for the left channel and one for the
* right channel. The following table maps from the Gain/Attenuation
* value in decibels into the corresponding bit pattern for a single
* channel.
*/
static void snd_emu10k1_ecard_setadcgain(emu10k1_t * emu,
unsigned short gain)
{
unsigned int bit;
/* Enable writing to the TRIM registers */
snd_emu10k1_ecard_write(emu, emu->ecard_ctrl & ~EC_TRIM_CSN);
/* Do it again to insure that we meet hold time requirements */
snd_emu10k1_ecard_write(emu, emu->ecard_ctrl & ~EC_TRIM_CSN);
for (bit = (1 << 15); bit; bit >>= 1) {
unsigned int value;
value = emu->ecard_ctrl & ~(EC_TRIM_CSN | EC_TRIM_SDATA);
if (gain & bit)
value |= EC_TRIM_SDATA;
/* Clock the bit */
snd_emu10k1_ecard_write(emu, value);
snd_emu10k1_ecard_write(emu, value | EC_TRIM_SCLK);
snd_emu10k1_ecard_write(emu, value);
}
snd_emu10k1_ecard_write(emu, emu->ecard_ctrl);
}
static int __devinit snd_emu10k1_ecard_init(emu10k1_t * emu)
{
unsigned int hc_value;
/* Set up the initial settings */
emu->ecard_ctrl = EC_RAW_RUN_MODE |
EC_SPDIF0_SELECT(EC_DEFAULT_SPDIF0_SEL) |
EC_SPDIF1_SELECT(EC_DEFAULT_SPDIF1_SEL);
/* Step 0: Set the codec type in the hardware control register
* and enable audio output */
hc_value = inl(emu->port + HCFG);
outl(hc_value | HCFG_AUDIOENABLE | HCFG_CODECFORMAT_I2S, emu->port + HCFG);
inl(emu->port + HCFG);
/* Step 1: Turn off the led and deassert TRIM_CS */
snd_emu10k1_ecard_write(emu, EC_ADCCAL | EC_LEDN | EC_TRIM_CSN);
/* Step 2: Calibrate the ADC and DAC */
snd_emu10k1_ecard_write(emu, EC_DACCAL | EC_LEDN | EC_TRIM_CSN);
/* Step 3: Wait for awhile; XXX We can't get away with this
* under a real operating system; we'll need to block and wait that
* way. */
snd_emu10k1_wait(emu, 48000);
/* Step 4: Switch off the DAC and ADC calibration. Note
* That ADC_CAL is actually an inverted signal, so we assert
* it here to stop calibration. */
snd_emu10k1_ecard_write(emu, EC_ADCCAL | EC_LEDN | EC_TRIM_CSN);
/* Step 4: Switch into run mode */
snd_emu10k1_ecard_write(emu, emu->ecard_ctrl);
/* Step 5: Set the analog input gain */
snd_emu10k1_ecard_setadcgain(emu, EC_DEFAULT_ADC_GAIN);
return 0;
}
static int __devinit snd_emu10k1_cardbus_init(emu10k1_t * emu)
{
unsigned long special_port;
unsigned int value;
/* Special initialisation routine
* before the rest of the IO-Ports become active.
*/
special_port = emu->port + 0x38;
value = inl(special_port);
outl(0x00d00000, special_port);
value = inl(special_port);
outl(0x00d00001, special_port);
value = inl(special_port);
outl(0x00d0005f, special_port);
value = inl(special_port);
outl(0x00d0007f, special_port);
value = inl(special_port);
outl(0x0090007f, special_port);
value = inl(special_port);
return 0;
}
/*
* Create the EMU10K1 instance
*/
static int snd_emu10k1_free(emu10k1_t *emu)
{
if (emu->port) { /* avoid access to already used hardware */
snd_emu10k1_fx8010_tram_setup(emu, 0);
snd_emu10k1_done(emu);
}
if (emu->memhdr)
snd_util_memhdr_free(emu->memhdr);
if (emu->silent_page.area)
snd_dma_free_pages(&emu->silent_page);
if (emu->ptb_pages.area)
snd_dma_free_pages(&emu->ptb_pages);
vfree(emu->page_ptr_table);
vfree(emu->page_addr_table);
if (emu->irq >= 0)
free_irq(emu->irq, (void *)emu);
if (emu->port)
pci_release_regions(emu->pci);
pci_disable_device(emu->pci);
if (emu->card_capabilities->ca0151_chip) /* P16V */
snd_p16v_free(emu);
kfree(emu);
return 0;
}
static int snd_emu10k1_dev_free(snd_device_t *device)
{
emu10k1_t *emu = device->device_data;
return snd_emu10k1_free(emu);
}
static emu_chip_details_t emu_chip_details[] = {
/* Audigy 2 Value AC3 out does not work yet. Need to find out how to turn off interpolators.*/
/* Tested by James@superbug.co.uk 3rd July 2005 */
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10011102,
.driver = "Audigy2", .name = "Audigy 2 Value [SB0400]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk71 = 1,
.ac97_chip = 1} ,
/* Audigy 2 ZS Notebook Cardbus card.*/
/* Tested by James@superbug.co.uk 30th October 2005 */
/* Not working yet, but progressing. */
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x20011102,
.driver = "Audigy2", .name = "Audigy 2 ZS Notebook [SB0530]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.ca_cardbus_chip = 1,
.spk71 = 1} ,
{.vendor = 0x1102, .device = 0x0008,
.driver = "Audigy2", .name = "Audigy 2 Value [Unknown]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.ac97_chip = 1} ,
/* Tested by James@superbug.co.uk 8th July 2005. No sound available yet. */
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40011102,
.driver = "Audigy2", .name = "E-mu 1212m [4001]",
.id = "EMU1212m",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ecard = 1} ,
/* Tested by James@superbug.co.uk 3rd July 2005 */
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20071102,
.driver = "Audigy2", .name = "Audigy 4 PRO [SB0380]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20021102,
.driver = "Audigy2", .name = "Audigy 2 ZS [SB0350]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20011102,
.driver = "Audigy2", .name = "Audigy 2 ZS [2001]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10071102,
.driver = "Audigy2", .name = "Audigy 2 [SB0240]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10051102,
.driver = "Audigy2", .name = "Audigy 2 EX [1005]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spdif_bug = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10021102,
.driver = "Audigy2", .name = "Audigy 2 Platinum [SB0240P]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .revision = 0x04,
.driver = "Audigy2", .name = "Audigy 2 [Unknown]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spdif_bug = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00531102,
.driver = "Audigy", .name = "Audigy 1 [SB0090]",
.id = "Audigy",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00521102,
.driver = "Audigy", .name = "Audigy 1 ES [SB0160]",
.id = "Audigy",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.spdif_bug = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00511102,
.driver = "Audigy", .name = "Audigy 1 [SB0090]",
.id = "Audigy",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004,
.driver = "Audigy", .name = "Audigy 1 [Unknown]",
.id = "Audigy",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x806B1102,
.driver = "EMU10K1", .name = "SBLive! [SB0105]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x806A1102,
.driver = "EMU10K1", .name = "SBLive! Value [SB0103]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80691102,
.driver = "EMU10K1", .name = "SBLive! Value [SB0101]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
/* Tested by Thomas Zehetbauer 27th Aug 2005 */
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80651102,
.driver = "EMU10K1", .name = "SB Live 5.1 [SB0220]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80641102,
.driver = "EMU10K1", .name = "SB Live 5.1",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
/* Tested by alsa bugtrack user "hus" bug #1297 12th Aug 2005 */
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80611102,
.driver = "EMU10K1", .name = "SBLive 5.1 [SB0060]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 2, /* ac97 is optional; both SBLive 5.1 and platinum
* share the same IDs!
*/
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80511102,
.driver = "EMU10K1", .name = "SBLive! Value [CT4850]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80401102,
.driver = "EMU10K1", .name = "SBLive! Platinum [CT4760P]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80321102,
.driver = "EMU10K1", .name = "SBLive! Value [CT4871]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80311102,
.driver = "EMU10K1", .name = "SBLive! Value [CT4831]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80281102,
.driver = "EMU10K1", .name = "SBLive! Value [CT4870]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
/* Tested by James@superbug.co.uk 3rd July 2005 */
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
.driver = "EMU10K1", .name = "SBLive! Value [CT4832]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80261102,
.driver = "EMU10K1", .name = "SBLive! Value [CT4830]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80231102,
.driver = "EMU10K1", .name = "SB PCI512 [CT4790]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80221102,
.driver = "EMU10K1", .name = "SBLive! Value [CT4780]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x40011102,
.driver = "EMU10K1", .name = "E-mu APS [4001]",
.id = "APS",
.emu10k1_chip = 1,
.ecard = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x00211102,
.driver = "EMU10K1", .name = "SBLive! [CT4620]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x00201102,
.driver = "EMU10K1", .name = "SBLive! Value [CT4670]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002,
.driver = "EMU10K1", .name = "SB Live [Unknown]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{ } /* terminator */
};
int __devinit snd_emu10k1_create(snd_card_t * card,
struct pci_dev * pci,
unsigned short extin_mask,
unsigned short extout_mask,
long max_cache_bytes,
int enable_ir,
uint subsystem,
emu10k1_t ** remu)
{
emu10k1_t *emu;
int err;
int is_audigy;
unsigned char revision;
const emu_chip_details_t *c;
static snd_device_ops_t ops = {
.dev_free = snd_emu10k1_dev_free,
};
*remu = NULL;
/* enable PCI device */
if ((err = pci_enable_device(pci)) < 0)
return err;
emu = kzalloc(sizeof(*emu), GFP_KERNEL);
if (emu == NULL) {
pci_disable_device(pci);
return -ENOMEM;
}
emu->card = card;
spin_lock_init(&emu->reg_lock);
spin_lock_init(&emu->emu_lock);
spin_lock_init(&emu->voice_lock);
spin_lock_init(&emu->synth_lock);
spin_lock_init(&emu->memblk_lock);
init_MUTEX(&emu->ptb_lock);
init_MUTEX(&emu->fx8010.lock);
INIT_LIST_HEAD(&emu->mapped_link_head);
INIT_LIST_HEAD(&emu->mapped_order_link_head);
emu->pci = pci;
emu->irq = -1;
emu->synth = NULL;
emu->get_synth_voice = NULL;
/* read revision & serial */
pci_read_config_byte(pci, PCI_REVISION_ID, &revision);
emu->revision = revision;
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &emu->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &emu->model);
snd_printdd("vendor=0x%x, device=0x%x, subsystem_vendor_id=0x%x, subsystem_id=0x%x\n",pci->vendor, pci->device, emu->serial, emu->model);
for (c = emu_chip_details; c->vendor; c++) {
if (c->vendor == pci->vendor && c->device == pci->device) {
if (subsystem) {
if (c->subsystem && (c->subsystem == subsystem) ) {
break;
} else continue;
} else {
if (c->subsystem && (c->subsystem != emu->serial) )
continue;
if (c->revision && c->revision != emu->revision)
continue;
}
break;
}
}
if (c->vendor == 0) {
snd_printk(KERN_ERR "emu10k1: Card not recognised\n");
kfree(emu);
pci_disable_device(pci);
return -ENOENT;
}
emu->card_capabilities = c;
if (c->subsystem && !subsystem)
snd_printdd("Sound card name=%s\n", c->name);
else if (subsystem)
snd_printdd("Sound card name=%s, vendor=0x%x, device=0x%x, subsystem=0x%x. Forced to subsytem=0x%x\n",
c->name, pci->vendor, pci->device, emu->serial, c->subsystem);
else
snd_printdd("Sound card name=%s, vendor=0x%x, device=0x%x, subsystem=0x%x.\n",
c->name, pci->vendor, pci->device, emu->serial);
if (!*card->id && c->id) {
int i, n = 0;
strlcpy(card->id, c->id, sizeof(card->id));
for (;;) {
for (i = 0; i < snd_ecards_limit; i++) {
if (snd_cards[i] && !strcmp(snd_cards[i]->id, card->id))
break;
}
if (i >= snd_ecards_limit)
break;
n++;
if (n >= SNDRV_CARDS)
break;
snprintf(card->id, sizeof(card->id), "%s_%d", c->id, n);
}
}
is_audigy = emu->audigy = c->emu10k2_chip;
/* set the DMA transfer mask */
emu->dma_mask = is_audigy ? AUDIGY_DMA_MASK : EMU10K1_DMA_MASK;
if (pci_set_dma_mask(pci, emu->dma_mask) < 0 ||
pci_set_consistent_dma_mask(pci, emu->dma_mask) < 0) {
snd_printk(KERN_ERR "architecture does not support PCI busmaster DMA with mask 0x%lx\n", emu->dma_mask);
kfree(emu);
pci_disable_device(pci);
return -ENXIO;
}
if (is_audigy)
emu->gpr_base = A_FXGPREGBASE;
else
emu->gpr_base = FXGPREGBASE;
if ((err = pci_request_regions(pci, "EMU10K1")) < 0) {
kfree(emu);
pci_disable_device(pci);
return err;
}
emu->port = pci_resource_start(pci, 0);
if (request_irq(pci->irq, snd_emu10k1_interrupt, SA_INTERRUPT|SA_SHIRQ, "EMU10K1", (void *)emu)) {
snd_emu10k1_free(emu);
return -EBUSY;
}
emu->irq = pci->irq;
emu->max_cache_pages = max_cache_bytes >> PAGE_SHIFT;
if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
32 * 1024, &emu->ptb_pages) < 0) {
snd_emu10k1_free(emu);
return -ENOMEM;
}
emu->page_ptr_table = (void **)vmalloc(emu->max_cache_pages * sizeof(void*));
emu->page_addr_table = (unsigned long*)vmalloc(emu->max_cache_pages * sizeof(unsigned long));
if (emu->page_ptr_table == NULL || emu->page_addr_table == NULL) {
snd_emu10k1_free(emu);
return -ENOMEM;
}
if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
EMUPAGESIZE, &emu->silent_page) < 0) {
snd_emu10k1_free(emu);
return -ENOMEM;
}
emu->memhdr = snd_util_memhdr_new(emu->max_cache_pages * PAGE_SIZE);
if (emu->memhdr == NULL) {
snd_emu10k1_free(emu);
return -ENOMEM;
}
emu->memhdr->block_extra_size = sizeof(emu10k1_memblk_t) - sizeof(snd_util_memblk_t);
pci_set_master(pci);
emu->fx8010.fxbus_mask = 0x303f;
if (extin_mask == 0)
extin_mask = 0x3fcf;
if (extout_mask == 0)
extout_mask = 0x7fff;
emu->fx8010.extin_mask = extin_mask;
emu->fx8010.extout_mask = extout_mask;
if (emu->card_capabilities->ecard) {
if ((err = snd_emu10k1_ecard_init(emu)) < 0) {
snd_emu10k1_free(emu);
return err;
}
} else if (emu->card_capabilities->ca_cardbus_chip) {
if ((err = snd_emu10k1_cardbus_init(emu)) < 0) {
snd_emu10k1_free(emu);
return err;
}
} else {
/* 5.1: Enable the additional AC97 Slots. If the emu10k1 version
does not support this, it shouldn't do any harm */
snd_emu10k1_ptr_write(emu, AC97SLOT, 0, AC97SLOT_CNTR|AC97SLOT_LFE);
}
if ((err = snd_emu10k1_init(emu, enable_ir)) < 0) {
snd_emu10k1_free(emu);
return err;
}
if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, emu, &ops)) < 0) {
snd_emu10k1_free(emu);
return err;
}
snd_emu10k1_proc_init(emu);
snd_card_set_dev(card, &pci->dev);
*remu = emu;
return 0;
}
/* memory.c */
EXPORT_SYMBOL(snd_emu10k1_synth_alloc);
EXPORT_SYMBOL(snd_emu10k1_synth_free);
EXPORT_SYMBOL(snd_emu10k1_synth_bzero);
EXPORT_SYMBOL(snd_emu10k1_synth_copy_from_user);
EXPORT_SYMBOL(snd_emu10k1_memblk_map);
/* voice.c */
EXPORT_SYMBOL(snd_emu10k1_voice_alloc);
EXPORT_SYMBOL(snd_emu10k1_voice_free);
/* io.c */
EXPORT_SYMBOL(snd_emu10k1_ptr_read);
EXPORT_SYMBOL(snd_emu10k1_ptr_write);
Reference in New Issue View Git Blame Copy Permalink