Commit Graph

24 Commits

Author SHA1 Message Date
Adrian Bunk
b00dc83764 sparc64: remove CVS keywords
This patch removes the CVS keywords that weren't updated for a long time
from comments.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-20 00:33:43 -07:00
David S. Miller
667bc389c7 [SPARC]: Kill 'prom_palette'.
The idea of this thing is we could save/restore the firmware's
palette when breaking in and out of the firmware prompt.

Only one driver implemented this (atyfb) and it's value is
questionable.  If you're just debugging you don't really
care that the characters end up being purple or whatever.

And we can provide better debugging and firmware command
facilities with minimal in-kernel console I/O drivers.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18 15:28:16 -08:00
David S. Miller
ce22e1d394 [SPARC64]: Fix booting on non-zero cpu.
The early per-cpu handling needs a slight tweak to work when booting
on a non-zero cpu.

We got away with this for a long time, but can't any longer as now
even printk() calls functions (cpu_clock() for example) that thus make
early references to per-cpu variables.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-07 02:58:40 -08:00
David S. Miller
d979f1792d [SPARC64]: __inline__ --> inline
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-27 00:13:04 -07:00
David S. Miller
301feb6524 [SPARC64]: Fix lockdep, particularly on SMP.
As noted by Al Viro, when we try to call prom_set_trap_table()
in the SMP trampoline code we try to take the PROM call spinlock
which doesn't work because the current thread pointer isn't
valid yet and lockdep depends upon that being correct.

Furthermore, we cannot set the current thread pointer register
because it can't be properly dereferenced until we return from
prom_set_trap_table().  Kernel TLB misses only work after that
call.

So do the PROM call to set the trap table directly instead of
going through the OBP library C code, and thus avoid the lock
altogether.

These calls are guarenteed to be serialized fully.

Since there are now no calls to the prom_set_trap_table{_sun4v}()
library functions, they can be deleted.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 11:51:15 -07:00
David S. Miller
c73fcc846c [SPARC]: Fix serial console device detection.
The current scheme works on static interpretation of text names, which
is wrong.

The output-device setting, for example, must be resolved via an alias
or similar to a full path name to the console device.

Paths also contain an optional set of 'options', which starts with a
colon at the end of the path.  The option area is used to specify
which of two serial ports ('a' or 'b') the path refers to when a
device node drives multiple ports.  'a' is assumed if the option
specification is missing.

This was caught by the UltraSPARC-T1 simulator.  The 'output-device'
property was set to 'ttya' and we didn't pick upon the fact that this
is an OBP alias set to '/virtual-devices/console'.  Instead we saw it
as the first serial console device, instead of the hypervisor console.

The infrastructure is now there to take advantage of this to resolve
the console correctly even in multi-head situations in fbcon too.

Thanks to Greg Onufer for the bug report.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20 16:59:26 -07:00
David S. Miller
4f0234f4f9 [SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.

When new cpus are configured, the machine description is
updated.  When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus.  That code
also proceeds to update the SMT/multi-core scheduling bitmaps.

cpu_up() does all the work and we return the status back
over the DS channel.

CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:

1) A new trampoline mechanism.  CPUs are booted straight
   out of the hypervisor with MMU disabled and running in
   physical addresses with no mappings installed in the TLB.

   The new hvtramp.S code sets up the critical cpu state,
   installs the locked TLB mappings for the kernel, and
   turns the MMU on.  It then proceeds to follow the logic
   of the existing trampoline.S SMP cpu bringup code.

2) All calls into OBP have to be disallowed when domaining
   is enabled.  Since cpus boot straight into the kernel from
   the hypervisor, OBP has no state about that cpu and therefore
   cannot handle being invoked on that cpu.

   Luckily it's only a handful of interfaces which can be called
   after the OBP device tree is obtained.  For example, rebooting,
   halting, powering-off, and setting options node variables.

CPU removal support will require some infrastructure changes
here.  Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue.  workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed.  Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.

Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed.  So new code will be needed
to walk the active INO list and retarget those cpus as-needed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:40 -07:00
David S. Miller
b3e13fbeb9 [SPARC64]: Fix setting of variables in LDOM guest.
There is a special domain services capability for setting
variables in the OBP options node.  Guests don't have permanent
store for the OBP variables like a normal system, so they are
instead maintained in the LDOM control node or in the SC.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:36 -07:00
David S. Miller
22d6a1cba3 [SPARC64]: Report proper system soft state to the hypervisor.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-29 02:49:29 -07:00
David S. Miller
06ffd7956e [SPARC]: Kill prom_getname, unused and not implemented properly.
The m68k port's sun3 asm/oplib.h had a stray reference too, so I
killed that off as well.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:17:55 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
David S. Miller
90a6646bf6 [SPARC64]: Fix system type in /proc/cpuinfo and remove bogus OBP check.
Report 'sun4v' when appropriate in /proc/cpuinfo

Remove all the verifications of the OBP version string.  Just
make sure it's there, and report it raw in the bootup logs and
via /proc/cpuinfo.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:14:25 -08:00
David S. Miller
c79f76777d [SPARC64]: Args to SUNW,set-trap-table are 64-bit.
They were getting truncated to 32-bit and this is very bad
when your MMU fault status area is in physical memory above
4GB on SUN4V.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:13:48 -08:00
David S. Miller
7890f794e0 [SPARC64]: Add prom_{start,stop}cpu_cpuid().
Use prom_startcpu_cpuid() on SUN4V instead of prom_startcpu().

We should really test for "SUNW,start-cpu-by-cpuid" presence
and use it if present even on SUN4U.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:13:04 -08:00
David S. Miller
1a7a242c89 [SPARC64]: Recognize "virtual-console" as input and output console device.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:12:28 -08:00
David S. Miller
12eaa328f9 [SPARC64]: Use ASI_SCRATCHPAD address 0x0 properly.
This is where the virtual address of the fault status
area belongs.

To set it up we don't make a hypervisor call, instead
we call OBP's SUNW,set-trap-table with the real address
of the fault status area as the second argument.  And
right before that call we write the virtual address into
ASI_SCRATCHPAD vaddr 0x0.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:12:15 -08:00
David S. Miller
d82ace7dc4 [SPARC64]: Detect sun4v early in boot process.
We look for "SUNW,sun4v" in the 'compatible' property
of the root OBP device tree node.

Protect every %ver register access, to make sure it is
not touched on sun4v, as %ver is hyperprivileged there.

Lock kernel TLB entries using hypervisor calls instead of
calls into OBP.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:12:03 -08:00
David S. Miller
8b11bd12af [SPARC64]: Patch up mmu context register writes for sun4v.
sun4v uses ASI_MMU instead of ASI_DMMU

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:11:56 -08:00
David S. Miller
45fec05f80 [SPARC64]: Sanitize %pstate writes for sun4v.
If we're just switching between different alternate global
sets, nop it out on sun4v.  Also, get rid of all of the
alternate global save/restore in the OBP CIF trampoline code.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:11:50 -08:00
Eddie C. Dost
c126cf80d4 [SPARC64]: Serial Console for E250 Patch
From: Eddie C. Dost <ecd@brainaid.de>

I have the following patch for serial console over the RSC
(remote system controller) on my E250 machine. It basically adds
support for input-device=rsc and output-device=rsc from OBP, and
allows 115200,8,n,1,- serial mode setting.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-18 14:54:31 -08:00
David S. Miller
b4d1b82578 [SPARC64]: Fix powering off on SMP.
Doing a "SUNW,stop-self" firmware call on the other cpus is not the
correct thing to do when dropping into the firmware for a halt,
reboot, or power-off.

For now, just do nothing to quiet the other cpus, as the system should
be quiescent enough.  Later we may decide to implement smp_send_stop()
like the other SMP platforms do.

Based upon a report from Christopher Zimmermann.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-14 15:26:08 -07:00
David S. Miller
4cb29d1812 [SPARC64]: Kill arch/sparc64/prom/memory.c
No longer used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-29 18:05:28 -07:00
David S. Miller
bff06d5522 [SPARC64]: Rewrite bootup sequence.
Instead of all of this cpu-specific code to remap the kernel
to the correct location, use portable firmware calls to do
this instead.

What we do now is the following in position independant
assembler:

	chosen_node = prom_finddevice("/chosen");
	prom_mmu_ihandle_cache = prom_getint(chosen_node, "mmu");
	vaddr = 4MB_ALIGN(current_text_addr());
	prom_translate(vaddr, &paddr_high, &paddr_low, &mode);
	prom_boot_mapping_mode = mode;
	prom_boot_mapping_phys_high = paddr_high;
	prom_boot_mapping_phys_low = paddr_low;
	prom_map(-1, 8 * 1024 * 1024, KERNBASE, paddr_low);

and that replaces the massive amount of by-hand TLB probing and
programming we used to do here.

The new code should also handle properly the case where the kernel
is mapped at the correct address already (think: future kexec
support).

Consequently, the bulk of remap_kernel() dies as does the entirety
of arch/sparc64/prom/map.S

We try to share some strings in the PROM library with the ones used
at bootup, and while we're here mark input strings to oplib.h routines
with "const" when appropriate.

There are many more simplifications now possible.  For one thing, we
can consolidate the two copies we now have of a lot of cpu setup code
sitting in head.S and trampoline.S.

This is a significant step towards CONFIG_DEBUG_PAGEALLOC support.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-22 20:11:33 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00