Commit Graph

31 Commits

Author SHA1 Message Date
Bjorn Helgaas
1f32ca31e7 PNP: convert resource options to single linked list
ISAPNP, PNPBIOS, and ACPI describe the "possible resource settings" of
a device, i.e., the possibilities an OS bus driver has when it assigns
I/O port, MMIO, and other resources to the device.

PNP used to maintain this "possible resource setting" information in
one independent option structure and a list of dependent option
structures for each device.  Each of these option structures had lists
of I/O, memory, IRQ, and DMA resources, for example:

  dev
    independent options
      ind-io0  -> ind-io1  ...
      ind-mem0 -> ind-mem1 ...
      ...
    dependent option set 0
      dep0-io0  -> dep0-io1  ...
      dep0-mem0 -> dep0-mem1 ...
      ...
    dependent option set 1
      dep1-io0  -> dep1-io1  ...
      dep1-mem0 -> dep1-mem1 ...
      ...
    ...

This data structure was designed for ISAPNP, where the OS configures
device resource settings by writing directly to configuration
registers.  The OS can write the registers in arbitrary order much
like it writes PCI BARs.

However, for PNPBIOS and ACPI devices, the OS uses firmware interfaces
that perform device configuration, and it is important to pass the
desired settings to those interfaces in the correct order.  The OS
learns the correct order by using firmware interfaces that return the
"current resource settings" and "possible resource settings," but the
option structures above doesn't store the ordering information.

This patch replaces the independent and dependent lists with a single
list of options.  For example, a device might have possible resource
settings like this:

  dev
    options
      ind-io0 -> dep0-io0 -> dep1->io0 -> ind-io1 ...

All the possible settings are in the same list, in the order they
come from the firmware "possible resource settings" list.  Each entry
is tagged with an independent/dependent flag.  Dependent entries also
have a "set number" and an optional priority value.  All dependent
entries must be assigned from the same set.  For example, the OS can
use all the entries from dependent set 0, or all the entries from
dependent set 1, but it cannot mix entries from set 0 with entries
from set 1.

Prior to this patch PNP didn't keep track of the order of this list,
and it assigned all independent options first, then all dependent
ones.  Using the example above, that resulted in a "desired
configuration" list like this:

  ind->io0 -> ind->io1 -> depN-io0 ...

instead of the list the firmware expects, which looks like this:

  ind->io0 -> depN-io0 -> ind-io1 ...

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16 23:27:07 +02:00
Bjorn Helgaas
d5ebde6ef5 PNP: support optional IRQ resources
This patch adds an IORESOURCE_IRQ_OPTIONAL flag for use when
assigning resources to a device.  If the flag is set and we are
unable to assign an IRQ to the device, we can leave the IRQ
disabled but allow the overall resource allocation to succeed.

Some devices request an IRQ, but can run without an IRQ
(possibly with degraded performance).  This flag lets us run
the device without the IRQ instead of just leaving the
device disabled.

This is a reimplementation of this previous change by Rene
Herman <rene.herman@gmail.com>:
    http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3b73a223661ed137c5d3d2635f954382e94f5a43

I reimplemented this for two reasons:
    - to prepare for converting all resource options into a single linked
      list, as opposed to the per-resource-type lists we have now, and
    - to preserve the order and number of resource options.

In PNPBIOS and ACPI, we configure a device by giving firmware a
list of resource assignments.  It is important that this list
has exactly the same number of resources, in the same order,
as the "template" list we got from the firmware in the first
place.

The problem of a sound card MPU401 being left disabled for want of
an IRQ was reported by Uwe Bugla <uwe.bugla@gmx.de>.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16 23:27:07 +02:00
Bjorn Helgaas
169aaffe88 PNP: increase I/O port & memory option address sizes
ACPI Address Space Descriptors can be up to 64 bits wide.
We should keep track of the whole thing when parsing resource
options, so this patch changes PNP port and mem option
fields from "unsigned short" and "unsigned int" to
"resource_size_t".

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16 23:27:06 +02:00
Bjorn Helgaas
7aefff5185 PNP: introduce pnp_irq_mask_t typedef
This adds a typedef for the IRQ bitmap, which should cause
no functional change, but will make it easier to pass a
pointer to a bitmap to pnp_register_irq_resource().

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16 23:27:06 +02:00
Bjorn Helgaas
08c9f262f2 PNP: define PNP-specific IORESOURCE_IO_* flags alongside IRQ, DMA, MEM
PNP previously defined PNP_PORT_FLAG_16BITADDR and PNP_PORT_FLAG_FIXED
in a private header file, but put those flags in struct resource.flags
fields.  Better to make them IORESOURCE_IO_* flags like the existing
IRQ, DMA, and MEM flags.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16 23:27:06 +02:00
Bjorn Helgaas
b72ee1f11e PNP: whitespace/coding style fixes
No functional change; just make a couple declarations
consistent with the rest of the file.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16 23:27:06 +02:00
Bjorn Helgaas
f61ed7e32d PNP: dont sort by type in /sys/.../resources
Rather than stepping through all IO resources, then stepping through
all MMIO resources, etc., we can just iterate over the resource list
once directly.

This can change the order in /sys, e.g.,

    # cat /sys/devices/pnp0/00:07/resources     # OLD
    state = active
    io 0x3f8-0x3ff
    irq 4

    # cat /sys/devices/pnp0/00:07/resources     # NEW
    state = active
    irq 4
    io 0x3f8-0x3ff

The old code artificially sorted resources by type; the new code
just lists them in the order we read them from the ISAPNP hardware
or the BIOS.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:06 +02:00
Bjorn Helgaas
aee3ad815d PNP: replace pnp_resource_table with dynamically allocated resources
PNP used to have a fixed-size pnp_resource_table for tracking the
resources used by a device.  This table often overflowed, so we've
had to increase the table size, which wastes memory because most
devices have very few resources.

This patch replaces the table with a linked list of resources where
the entries are allocated on demand.

This removes messages like these:

    pnpacpi: exceeded the max number of IO resources
    00:01: too many I/O port resources

References:

    http://bugzilla.kernel.org/show_bug.cgi?id=9535
    http://bugzilla.kernel.org/show_bug.cgi?id=9740
    http://lkml.org/lkml/2007/11/30/110

This patch also changes the way PNP uses the IORESOURCE_UNSET,
IORESOURCE_AUTO, and IORESOURCE_DISABLED flags.

Prior to this patch, the pnp_resource_table entries used the flags
like this:

    IORESOURCE_UNSET
	This table entry is unused and available for use.  When this flag
	is set, we shouldn't look at anything else in the resource structure.
	This flag is set when a resource table entry is initialized.

    IORESOURCE_AUTO
	This resource was assigned automatically by pnp_assign_{io,mem,etc}().

	This flag is set when a resource table entry is initialized and
	cleared whenever we discover a resource setting by reading an ISAPNP
	config register, parsing a PNPBIOS resource data stream, parsing an
	ACPI _CRS list, or interpreting a sysfs "set" command.

	Resources marked IORESOURCE_AUTO are reinitialized and marked as
	IORESOURCE_UNSET by pnp_clean_resource_table() in these cases:

	    - before we attempt to assign resources automatically,
	    - if we fail to assign resources automatically,
	    - after disabling a device

    IORESOURCE_DISABLED
	Set by pnp_assign_{io,mem,etc}() when automatic assignment fails.
	Also set by PNPBIOS and PNPACPI for:

	    - invalid IRQs or GSI registration failures
	    - invalid DMA channels
	    - I/O ports above 0x10000
	    - mem ranges with negative length

After this patch, there is no pnp_resource_table, and the resource list
entries use the flags like this:

    IORESOURCE_UNSET
	This flag is no longer used in PNP.  Instead of keeping
	IORESOURCE_UNSET entries in the resource list, we remove
	entries from the list and free them.

    IORESOURCE_AUTO
	No change in meaning: it still means the resource was assigned
	automatically by pnp_assign_{port,mem,etc}(), but these functions
	now set the bit explicitly.

	We still "clean" a device's resource list in the same places,
	but rather than reinitializing IORESOURCE_AUTO entries, we
	just remove them from the list.

	Note that IORESOURCE_AUTO entries are always at the end of the
	list, so removing them doesn't reorder other list entries.
	This is because non-IORESOURCE_AUTO entries are added by the
	ISAPNP, PNPBIOS, or PNPACPI "get resources" methods and by the
	sysfs "set" command.  In each of these cases, we completely free
	the resource list first.

    IORESOURCE_DISABLED
	In addition to the cases where we used to set this flag, ISAPNP now
	adds an IORESOURCE_DISABLED resource when it reads a configuration
	register with a "disabled" value.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:05 +02:00
Bjorn Helgaas
87e4acf3eb PNP: remove pnp_resource.index
We used pnp_resource.index to keep track of which ISAPNP configuration
register a resource should be written to.  We needed this only to
handle the case where a register is disabled but a subsequent register
in the same set is enabled.

Rather than explicitly maintaining the pnp_resource.index, this patch
adds a resource every time we read an ISAPNP configuration register
and marks the resource as IORESOURCE_DISABLED when appropriate.  This
makes the position in the pnp_resource_table always correspond to the
config register index.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:05 +02:00
Bjorn Helgaas
f2a5f24a27 PNP: set IRQ index in sysfs "set irq" interface
We have to set the ISAPNP register index when setting an IRQ via the sysfs
interface.  We already do it for IO, MEM, and DMA resources; I just missed the
IRQ one.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-13 08:02:24 -07:00
Bjorn Helgaas
d6180f3661 PNP: make generic pnp_add_mem_resource()
Add a pnp_add_mem_resource() that can be used by all the PNP
backends.  This consolidates a little more pnp_resource_table
knowledge into one place.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 03:22:29 -04:00
Bjorn Helgaas
cc8c2e3081 PNP: make generic pnp_add_io_resource()
Add a pnp_add_io_resource() that can be used by all the PNP
backends.  This consolidates a little more pnp_resource_table
knowledge into one place.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 03:22:29 -04:00
Bjorn Helgaas
dc16f5f2ed PNP: make generic pnp_add_dma_resource()
Add a pnp_add_dma_resource() that can be used by all the PNP
backends.  This consolidates a little more pnp_resource_table
knowledge into one place.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 03:22:28 -04:00
Bjorn Helgaas
dbddd0383c PNP: make generic pnp_add_irq_resource()
Add a pnp_add_irq_resource() that can be used by all the PNP
backends.  This consolidates a little more pnp_resource_table
knowledge into one place.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 03:22:28 -04:00
Bjorn Helgaas
21855d69d1 PNP: add pnp_resource index for ISAPNP
Save the ISAPNP config register index in the struct pnp_resource.

We need this because it is important to write ISAPNP configuration
back to the same registers we read it from.  For example, if we
read valid regions from memory descriptors 0, 1, and 3, we'd
better write them back to the same registers, without compressing
them to descriptors 0, 1, and 2.

This was previously guaranteed by using the index into the
pnp_resource_table array as the ISAPNP config register index.
However, I am removing those fixed-size arrays, so we need to
save the ISAPNP register index elsewhere.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 03:22:28 -04:00
Bjorn Helgaas
95ab3669f7 PNP: remove PNP_MAX_* uses
Remove some PNP_MAX_* uses.  The pnp_resource_table isn't
dynamic yet, but with pnp_get_resource(), we can start moving
away from the table size constants.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 03:22:26 -04:00
Bjorn Helgaas
f6505fef18 PNP: convert assign, interface to use pnp_get_resource(), not pnp_resource_table
This removes more direct references to pnp_resource_table from the
pnp_assign_resources() path and the /sys user interface path.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 03:22:26 -04:00
Bjorn Helgaas
470feb113a PNP: reduce redundancy in pnp_set_current_resources()
Use a temporary "res" pointer to replace repeated lookups in
the pnp resource tables.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-By: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 03:22:25 -04:00
Bjorn Helgaas
f449000209 PNP: add pnp_init_resources(struct pnp_dev *) interface
Add pnp_init_resources(struct pnp_dev *) to replace
pnp_init_resource_table(), which takes a pointer to the
pnp_resource_table itself.  Passing only the pnp_dev * reduces
the possibility for error in the caller and removes the
pnp_resource_table implementation detail from the interface.

Even though pnp_init_resource_table() is exported, I did not
export pnp_init_resources() because it is used only by the PNP
core.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-By: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 03:22:22 -04:00
Bjorn Helgaas
59284cb409 PNP: remove pnp_resource_table from internal get/set interfaces
When we call protocol->get() and protocol->set() methods, we currently
supply pointers to both the pnp_dev and the pnp_resource_table even
though the pnp_resource_table should always be the one associated with
the pnp_dev.

This removes the pnp_resource_table arguments to make it clear that
these methods only operate on the specified pnp_dev.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-By: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 03:22:21 -04:00
Daniel Walker
b3bd86e2fd isapnp driver semaphore to mutex
Changed the isapnp semaphore to a mutex.

[akpm@linux-foundation.org: no externs-in-c]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:20 -08:00
Bjorn Helgaas
a05d078169 PNP: use dev_info(), dev_err(), etc in core
If we have the struct pnp_dev available, we can use dev_info(), dev_err(),
etc., to give a little more information and consistency.

[akpm@linux-foundation.org: fix warning]
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:43:04 -07:00
Jaroslav Kysela
c1017a4cdb [ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.cz
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 16:51:18 +02:00
Bjorn Helgaas
1e0aa9ad72 PNP: fix up after Lindent
More manual fixups after Lindent.  No functional change.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Adam Belay <abelay@novell.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-24 01:27:23 -04:00
Bjorn Helgaas
07d4e9af10 PNP: fix up after Lindent
These are manual fixups after running Lindent.  No functional change.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:21 -07:00
Bjorn Helgaas
9dd78466c9 PNP: Lindent all source files
Run Lindent on all PNP source files.

Produced by:

    $ quilt new pnp-lindent
    $ find drivers/pnp -name \*.[ch] | xargs quilt add
    $ quilt add include/linux/{pnp.h,pnpbios.h}
    $ scripts/Lindent drivers/pnp/*.c drivers/pnp/*/*.c include/linux/pnp*.h
    $ quilt refresh --sort

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:20 -07:00
Jeff Garzik
bfc7ee2070 [PATCH] PNP: handle sysfs errors
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:31 -08:00
Pierre Ossman
2131ca8915 PNP: Add missing casts in printk() arguments
Some resource_size_t values are fed to printk() without handling the fact
that they can have different size depending on your .config.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-03 13:20:06 -07:00
Greg Kroah-Hartman
b60ba8343b [PATCH] 64bit resource: change pnp core to use resource_size_t
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com>

Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27 09:24:00 -07:00
Yani Ioannou
e404e274f6 [PATCH] Driver Core: drivers/i2c/chips/w83781d.c - drivers/s390/block/dcssblk.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:34 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00