Commit Graph

2375 Commits

Author SHA1 Message Date
Serge E. Hallyn
96b644bdec [PATCH] namespaces: utsname: use init_utsname when appropriate
In some places, particularly drivers and __init code, the init utsns is the
appropriate one to use.  This patch replaces those with a the init_utsname
helper.

Changes: Removed several uses of init_utsname().  Hope I picked all the
	right ones in net/ipv4/ipconfig.c.  These are now changed to
	utsname() (the per-process namespace utsname) in the previous
	patch (2/7)

[akpm@osdl.org: CIFS fix]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:21 -07:00
Peter Zijlstra
6e9a4738c9 [PATCH] completions: lockdep annotate on stack completions
All on stack DECLARE_COMPLETIONs should be replaced by:
DECLARE_COMPLETION_ONSTACK

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:24 -07:00
Richard Knutsson
6e21828743 [PATCH] Generic boolean
This patch defines:
* a generic boolean-type, named 'bool'
* aliases to 0 and 1, named 'false' and 'true'

Removing colliding definitions of 'bool', 'false' and 'true'.

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:18 -07:00
Jeff Garzik
1bdfd554be [PATCH] SCSI: fix request flag-related build breakage
The ->flags in struct request was split into two variables, in a recent
changeset.  The merge of this change forgot to update SCSI's libsas,
probably because libsas was a very recent merge.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30 19:33:43 -07:00
David Howells
9361401eb7 [PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:31 +02:00
Jens Axboe
9bf09c2385 [PATCH] SCSI: scsi_done_q is unused
It is a leftover from before the softirq completion was migrated
to the block layer.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:31:11 +02:00
Jens Axboe
cdd6026217 [PATCH] Remove ->rq_status from struct request
After Christophs SCSI change, the only usage left is RQ_ACTIVE
and RQ_INACTIVE. The block layer sets RQ_INACTIVE right before freeing
the request, so any check for RQ_INACTIVE in a driver is a bug and
indicates use-after-free.

So kill/clean the remaining users, straight forward.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:23 +02:00
Jens Axboe
4aff5e2333 [PATCH] Split struct request ->flags into two parts
Right now ->flags is a bit of a mess: some are request types, and
others are just modifiers. Clean this up by splitting it into
->cmd_type and ->cmd_flags. This allows introduction of generic
Linux block message types, useful for sending generic Linux commands
to block devices.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:23:37 +02:00
Michael Tokarev
07563c711f [PATCH] EISA bus MODALIAS attributes support
Add modalias attribute support for the almost forgotten now EISA bus and
(at least some) EISA-aware modules.

The modalias entry looks like (for an 3c509 NIC):

 eisa:sTCM5093

and the in-module alias like:

 eisa:sTCM5093*

The patch moves struct eisa_device_id declaration from include/linux/eisa.h
to include/linux/mod_devicetable.h (so that the former now #includes the
latter), adds proper MODULE_DEVICE_TABLE(eisa, ...) statements for all
drivers with EISA IDs I found (some drivers already have that DEVICE_TABLE
declared), and adds recognision of __mod_eisa_device_table to
scripts/mod/file2alias.c so that proper modules.alias will be generated.

There's no support for /lib/modules/$kver/modules.eisamap, as it's not used
by any existing tools, and because with in-kernel modalias mechanism those
maps are obsolete anyway.

The rationale for this patch is:

 a) to make EISA bus to act as other busses with modalias
    support, to unify driver loading

 b) to foget about EISA finally - with this patch, kernel
    (who still supports EISA) will be the only one who knows
    how to choose the necessary drivers for this bus ;)

[akpm@osdl.org: fix the kbuild bit]
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Acked-the-net-bits-by: Jeff Garzik <jeff@garzik.org>
Acked-the-tulip-bit-by: Valerie Henson <val_henson@linux.intel.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:26:19 -07:00
David Brownell
8b4b8a24e4 fix broken/dubious driver suspend() methods
Small driver suspend() fixes in preparation for the PRETHAW events:

 - Only compare message events for equality against PM_EVENT_* codes;
   not against integers, or using greater/less-than comparisons.
   (PM_EVENT_* should really become a __bitwise thing.)

 - Explicitly test for SUSPEND events (rather than not-something-else)
   before suspending devices.

 - Removes more of the confusion between a pm_message_t (wraps event code)
   and a "state" ... suspend() originally took a target system state.

These updates are correct and appropriate even without new PM_EVENT codes.

benh: "I think in the Mesh case, we should handle the freeze case as well or
we might get wild DMA."

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Greg KH <greg@kroah.com>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-25 21:08:37 -07:00
Al Viro
355edd2e39 [PATCH] fix idiocy in asd_init_lseq_mdp()
To whoever had written that code:

 a) priority of >> is higher than that of &
 b) priority of typecast is higher than that of any binary operator
 c) learn the fscking C

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24 20:07:49 -07:00
Al Viro
3cc27547d6 [PATCH] SCSI gfp_t annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24 20:07:49 -07:00
Matthew Wilcox
8a1cdc9ca2 [PATCH] Revert ABI-breaking change in /proc
Some user tools parse /proc/scsi/scsi, so we can't yet change the names.
Change the existing ones back to their old names, and add an admonition
to not make the same mistake that I did.

Andrew Morton reports that this was breaking YDL 4.1 userspace.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24 19:49:01 -07:00
Al Viro
6a3670c4f1 [PATCH] missing include (free_irq() use)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24 15:55:03 -07:00
Jeff Garzik
23930fa1ce Merge branch 'master' into upstream 2006-09-24 01:52:47 -04:00
James Bottomley
1b73c4bb06 [SCSI] scsi_transport_fc: fixup netlink arguments
nlmsg_multicast now takes an extra allocation flag, so add it to
the use in the fibre channel transport class.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 22:07:20 -05:00
James Bottomley
dfdc58ba35 [SCSI] SPI transport class: misc DV fixes
Key more of the domain validation settings off the inquiry data from
the disk (in particular, don't try IU or DT unless the disk claims to
support them.

Also add a new dv_in_progress flag to prevent recursive DV.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 20:53:53 -05:00
Alan Cox
a07f353701 [SCSI] Switch some more scsi drivers to pci_get_device and refcounted pci structures
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 20:32:52 -05:00
Alan Cox
1a68d41a33 [SCSI] eata_pio cleanup and PCI fix
This started as a PCI reference fixup but to do that I need to build it,
to build it I need to fix it and its full of 32bitisms and uglies.

It has been resurrected, I'm not sure if this is a thank you for the
work on the license stuff or punishment for some unknown misdeed however
8). I've also fixed a memory scribble in the init code.

One oddity - the changes from HZ * to constants are deliberate. Whoever
originally wrote the code (or cleaned it up) used HZ for a cycle timing
loop even though is not HZ related. I've put it back to the counts used
in the old days when the driver was most used.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 20:28:19 -05:00
Mark Haverkamp
ac5826ca91 [SCSI] aacraid: remove scsi_remove_device
Received from Mark Salyzyn:

Until the system is stabilized, I am suggesting the enclosed
modification to prevent the driver from tickling the panic. Once sysfs
and friends are stabilized, the patch may be backed out. We have yet to
evaluate if we really want to relinquish existing Scsi Devices in any
case, holding on to them as configuration of arrays comes and goes makes
some sense as well. As a result, we have opted to pull the lines rather
than comment them in legacy.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 20:10:10 -05:00
Mark Haverkamp
76a7f8fdc0 [SCSI] aacraid: merge rx and rkt code
Received from Mark Salyzyn:

The only real difference between the rkt and rx platform modules is the
offset of the message registers. This patch recognizes this similarity
and simplifies the driver to reduce it's code footprint and to improve
maintainability by reducing the code duplication.

Visibly, the 'rkt.c' portion of this patch looks more complicated than
it really is. View it as retaining the rkt-only specifics of the
interface.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 20:09:42 -05:00
Mark Haverkamp
653ba58d55 [SCSI] aacraid: expose physical devices
Received from Mark Salyzyn:

I am placing this functionality into an insmod parameter. Normally the physical
components are exported to sg, and are blocked from showing up in sd.

Note that the pass-through I/O path via the driver through the Firmware to the
physical disks is not an optimized path, the card is designed for Hardware
RAID, elevator sorting and caching. This should not be used as a means for
utilizing the aacraid based controllers as a generic scsi/SATA/SAS controller,
performance should suck by a few percentage points, any RAID meta-data on the
drives will confuse the controller about who owns the drives and there is a
high risk of destroying content in both directions. Unreliable and for
experimentation or strange controlled circumstances only.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 20:09:03 -05:00
Mark Haverkamp
6510135545 [SCSI] aacraid: misc cleanup
Received from Mark Salyzyn:

Basically cleanup, nothing here will have an affect. Adjusting some
error codes, removing superfluous definitions and code fragments.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 20:08:26 -05:00
Doug Ledford
cf2b5d3fca [SCSI] aic7xxx: pause sequencer before touching SBLKCTL
Some cards need to pause the sequencer before the SBLKCTL register is
touched.  This fixes a PCI related oops seen on powerpc macs with this
card caused by trying to ascertain the bus signalling before beginning
domain validation.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 17:48:11 -05:00
James Bottomley
3e3c60e3a8 [SCSI] aic7xxx: avoid checking SBLKCTL register for certain cards
For cards that don't support LVD, checking the SBLKCTL register to
determine the bus singalling doesn't work.  So, check that the card
supports LVD first (AHC_ULTRA2) before checking the register.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 17:39:34 -05:00
Douglas Gilbert
231839102b [SCSI] scsi_debug version 1.80
See http://www.torque.net/sg/sdebug26.html for more
information on the scsi_debug driver.

ChangeLog:
  - add 'vpd_use_hostno' parameter to allow simulated hosts
    to see the same set of targets (and luns). For testing
    multipath software.
  - add 'fake_rw' parameter to ignore the data in READ and
    WRITE commands
  - add support for log subpages (new in SPC-4)
  - yield appropriate block descriptor for MODE SENSE
    commands (only for pdt=0 (i.e. disks))
  - REQUEST SENSE response no longer shows the stopped
    power condition (SAT changed to agree with SPC-3)

Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 17:37:44 -05:00
James Bottomley
c9802cd957 Merge mulgrave-w:git/scsi-misc-2.6
Conflicts:

	drivers/scsi/iscsi_tcp.c
	drivers/scsi/iscsi_tcp.h

Pretty horrible merge between crypto hash consolidation
and crypto_digest_...->crypto_hash_... conversion

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 15:33:43 -05:00
Jesper Juhl
2d2f8d59b1 [SCSI] megaraid: Make megaraid_ioctl() check copy_to_user() return value
Check copy_to_user() return value in drivers/scsi/megaraid.c::megadev_ioctl()
This gets rid of this little warning:
  drivers/scsi/megaraid.c:3661: warning: ignoring return value of 'copy_to_user', declared with attribute warn_unused_result

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: "Ju, Seokmann" <Seokmann.Ju@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 11:53:09 -05:00
James Bottomley
5fcda42245 [SCSI] aha152x: remove static host array
Fix this driver not to use a static two element host array instead use
a list.  This should fix panic on multiple eject reinsert of the
pcmcia version of this device.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 11:51:57 -05:00
malahal@us.ibm.com
10d19ae5e1 [SCSI] aic94xx: Fix for a typo in aic94xx_init()
Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 11:47:29 -05:00
Alexis Bruemmer
f2d719c65a [SCSI] aic94xx: Removes Reliance on FLASH Manufacture IDs
This patch removes the reliance on FLASH Manufacture IDs for validation.

Signed-off-by: Alexis Bruemmer <alexisb@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 11:47:00 -05:00
Linus Torvalds
6bbd9b6d69 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (64 commits)
  [BLOCK] dm-crypt: trivial comment improvements
  [CRYPTO] api: Deprecate crypto_digest_* and crypto_alg_available
  [CRYPTO] padlock: Convert padlock-sha to use crypto_hash
  [CRYPTO] users: Use crypto_comp and crypto_has_*
  [CRYPTO] api: Add crypto_comp and crypto_has_*
  [CRYPTO] users: Use crypto_hash interface instead of crypto_digest
  [SCSI] iscsi: Use crypto_hash interface instead of crypto_digest
  [CRYPTO] digest: Remove old HMAC implementation
  [CRYPTO] doc: Update documentation for hash and me
  [SCTP]: Use HMAC template and hash interface
  [IPSEC]: Use HMAC template and hash interface
  [CRYPTO] tcrypt: Use HMAC template and hash interface
  [CRYPTO] hmac: Add crypto template implementation
  [CRYPTO] digest: Added user API for new hash type
  [CRYPTO] api: Mark parts of cipher interface as deprecated
  [PATCH] scatterlist: Add const to sg_set_buf/sg_init_one pointer argument
  [CRYPTO] drivers: Remove obsolete block cipher operations
  [CRYPTO] users: Use block ciphers where applicable
  [SUNRPC] GSS: Use block ciphers where applicable
  [IPSEC] ESP: Use block ciphers where applicable
  ...
2006-09-22 12:51:33 -07:00
Herbert Xu
dc64ddf491 [SCSI] iscsi: Use crypto_hash interface instead of crypto_digest
This patch converts ISCSI to use the new crypto_hash interface instead
of crypto_digest.  It's a fairly straightforward substitution.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-21 11:46:20 +10:00
Jeff Garzik
4a3381feb8 Merge branch 'master' into upstream 2006-09-19 00:42:13 -04:00
Paul Mackerras
c547fc28ab Merge branch 'linux-2.6' 2006-09-14 07:07:18 +10:00
Stefan Richter
7fbb36451a [PATCH] SCSI: lockdep annotation in scsi_send_eh_cmnd
Fixup for lockdep enabled kernels: Annotate an on-stack completion.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-13 07:32:14 -07:00
Tejun Heo
a4f5749ba6 [PATCH] libata: ignore CFA signature while sanity-checking an ATAPI device
0x848a in ID word 0 indicates CFA device iff the ID data is obtained from
IDENTIFY DEVICE.  For ATAPI devices, 0x848a in ID work 0 indicates valid
ATAPI device.  Fix sanity check in ata_dev_read_id() such that ATAPI
devices reporting 0x848a in ID word 0 is not handled as error.

The problem is identified by J.A.  Magallon with HL-DT-ST DVDRAM GSA-4120B.

Signed-off-by: Tejun Helo <htejun@gmail.com>
Cc: J.A. Magallon <jamagallon@ono.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-13 07:32:14 -07:00
Henrik Kretzschmar
65396410af [SCSI] wd33c93: Scsi_Cmnd convertion
Changes obsolete typedef'd Scsi_Cmnd to struct scsi_cmnd.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-12 17:12:31 -05:00
Daniel Walker
a506b44bb5 [SCSI] fix compile error on module_refcount
LD      .tmp_vmlinux1
drivers/built-in.o(.text+0x8e1f9): In function `scsi_device_put':
drivers/scsi/scsi.c:887: undefined reference to `module_refcount'
make: *** [.tmp_vmlinux1] Error 1

There are only two users of module_refcount() outside of kernel/module.c
and the other one uses ifdef's similar to this.

Signed-Off-By: Daniel Walker <dwalker@mvista.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-12 09:17:30 -05:00
Linus Torvalds
3f2f1257ff Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] ata_piix: add map 01b for ICH7M
  [libata] sata_mv: errata check buglet fix
2006-09-11 07:54:14 -07:00
Alan Cox
28a2a3f587 [PATCH] Fix 2.6.18-rc6 IDE breakage, add missing ident needed for current VIA boards
There are two changes here.  The first reverses the broken PCI_DEVICE
conversion back to the old format.  The second adds a missing PCI ID so
you can actually boot 2.6.18 on 2 month old VIA motherboards (right now
only 2.6.18-mm works).

CC'd to Jeff to check the PCI ident but its a) in several distro kernels
and b) in 2.6.18-mm [twice ??]

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-11 07:53:44 -07:00
Tejun Heo
6708374178 [PATCH] ata_piix: add map 01b for ICH7M
Although the document says otherwise, some ich7m uses map 01b.  This
patch adds separate map DB for ICH7M and adds map entry for 01b.

This was spotted on an ASUS laptop by Jonathan Dieter.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Jonathan Dieter <jdieter@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-11 08:52:29 -04:00
Andres Salomon
62f1d0e6de [libata] sata_mv: errata check buglet fix
Fix a buglet; the errata check below this code is assuming the value in
the sstatus variable is what was pulled out of the SCR_STATUS register.
However, the status checks in the timeout loop clobber everything
but the first 4 bits of sstatus, so the errata checks are invalid.

This patch changes it to not clobber SStatus.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-11 08:51:05 -04:00
James Bottomley
2b7cbe2017 [SCSI] fix up SCSI netlink build
CONFIG_SCSI_NETLINK can become a bool since the item its
selecting (CONFIG_NET) cannot be a module.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07 15:21:50 -05:00
James Bottomley
a01e70e570 [SCSI] aci94xx: implement link rate setting
This patch implements the ability to set the minimum and maximum
linkrates for both libsas (for expanders) and aic94xx (for the host
phys).  It also tidies up the setting of the hardware min and max to
make sure they're updated when the expander emits a change broadcast.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07 15:20:23 -05:00
James Bottomley
d24e1eeb3a [SCSI] scsi_transport_sas: make minimum and maximum linkrate settable quantities
According to SPEC, the minimum_linkrate and maximum_linkrate should be
settable by the user.  This patch introduces a callback that allows the
sas class to pass these settings on to the driver.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07 15:16:44 -05:00
James Bottomley
88edf74610 [SCSI] SAS: consolidate linkspeed definitions
At the moment we have two separate linkspeed enumerations covering
roughly the same values.  This patch consolidates on a single one enum
sas_linkspeed in scsi_transport_sas.h and uses it everywhere in the
aic94xx driver.  Eventually I'll get around to removing the duplicated
fields in asd_sas_phy and sas_phy ...

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07 12:41:16 -05:00
Henrik Kretzschmar
b4620233d6 [SCSI] scsi-driver ultrastore replace Scsi_Cmnd with struct scsi_cmnd
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07 12:39:34 -05:00
James Bottomley
f479ab8793 [SCSI] fix up non-modular SCSI
The recent change to the way scsi_device_get()/put() work broke the
non modular build (we do a module_refcount on a NULL).  Fix this by
checking for non-null before checking module_refcount().

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07 10:37:22 -05:00
James Bottomley
884d25cc4f [SCSI] Fix refcount breakage with 'echo "1" > scan' when target already present
Spotted by: Dan Aloni <da-xx@monatomic.org>

The problem is there's inconsistent locking semantic usage of
scsi_alloc_target().  Two callers assume the target comes back with
reference unincremented and the third assumes its incremented.  Fix by
always making the reference incremented on return.  Also fix path in
target alloc that could consistently increment the parent lock.
Finally document scsi_alloc_target() so its callers know what the
expectations are.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07 10:08:43 -05:00