Commit Graph

19 Commits

Author SHA1 Message Date
Arnd Bergmann
1c72db14fe [POWERPC] update cell_defconfig for ps3 support
In the common cell kernel, I want to have ps3 enabled
to find potential bugs at compile-time.
Also enable SPU disassembly in xmon.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04 20:41:01 +11:00
Maynard Johnson
18f2190d79 [POWERPC] cell: Add oprofile support
Add PPU event-based and cycle-based profiling support to Oprofile for Cell.

Oprofile is expected to collect data on all CPUs simultaneously.
However, there is one set of performance counters per node.  There are
two hardware threads or virtual CPUs on each node.  Hence, OProfile must
multiplex in time the performance counter collection on the two virtual
CPUs.

The multiplexing of the performance counters is done by a virtual
counter routine.  Initially, the counters are configured to collect data
on the even CPUs in the system, one CPU per node.  In order to capture
the PC for the virtual CPU when the performance counter interrupt occurs
(the specified number of events between samples has occurred), the even
processors are configured to handle the performance counter interrupts
for their node.  The virtual counter routine is called via a kernel
timer after the virtual sample time.  The routine stops the counters,
saves the current counts, loads the last counts for the other virtual
CPU on the node, sets interrupts to be handled by the other virtual CPU
and restarts the counters, the virtual timer routine is scheduled to run
again.  The virtual sample time is kept relatively small to make sure
sampling occurs on both CPUs on the node with a relatively small
granularity.  Whenever the counters overflow, the performance counter
interrupt is called to collect the PC for the CPU where data is being
collected.

The oprofile driver relies on a firmware RTAS call to setup the debug bus
to route the desired signals to the performance counter hardware to be
counted.  The RTAS call must set the routing registers appropriately in
each of the islands to pass the signals down the debug bus as well as
routing the signals from a particular island onto the bus.  There is a
second firmware RTAS call to reset the debug bus to the non pass thru
state when the counters are not in use.

Signed-off-by: Carl Love <carll@us.ibm.com>
Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:40:14 +11:00
Paul Mackerras
79acbb3ff2 Merge branch 'linux-2.6' into for-linus 2006-12-04 15:59:07 +11:00
Christian Krafft
36ca4ba4b9 [POWERPC] cell: add cpufreq driver for Cell BE processor
This patch adds a cpufreq backend driver to enable frequency scaling on cell.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25 14:20:22 +10:00
Christian Krafft
b3d7dc1967 [POWERPC] cell: add temperature to SPU and CPU sysfs entries
This patch adds a module that registers sysfs attributes to CPU and SPU
containing the temperature of the CBE.

They can be found under
/sys/devices/system/spu/cpuX/thermal/temperature[0|1]
/sys/devices/system/spu/spuX/thermal/temperature

The temperature is read from the on-chip temperature sensors.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25 14:20:22 +10:00
Arnd Bergmann
b910ecf6bf [POWERPC] cell: update defconfig
===================================================================

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25 12:10:41 +10:00
Arnd Bergmann
68272047c5 [POWERPC] Update cell_defconfig
This adds defaults for new configuration options added since
2.6.18 and it enables the option for 64kb pages by default.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-05 09:21:02 +10:00
Paul Mackerras
fb7d527c1a [POWERPC] Update defconfigs
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-10 11:04:36 +10:00
Michael Ellerman
6b7290be0c [POWERPC] Enable XMON in cell_defconfig
Now that we have the udbg callbacks we can enable XMON by default.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 11:59:48 +10:00
Geoff Levand
c01ea72a3b [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts
Creates new config variables PPC_CELL_NATIVE and PPC_IBM_CELL_BLADE.
The existing CONFIG_PPC_CELL is now used to denote the generic
Cell processor support.

PPC_CELL = make descends into platforms/cell
PPC_CELL_NATIVE = add bare metal support
PPC_IBM_CELL_BLADE = add blade device drivers, etc.

Also renames spu_priv1.c to spu_priv1_mmio.c.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21 15:01:31 +10:00
arnd@arndb.de
0f0f90c304 [POWERPC] cell: update defconfig
Enable some of the most requested features in defconfig
and refresh with the latest powerpc.git Kconfig files.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21 15:01:29 +10:00
Benjamin Herrenschmidt
acf7d76827 [POWERPC] cell: add RAS support
This is a first version of support for the Cell BE "Reliability,
Availability and Serviceability" features.

It doesn't yet handle some of the RAS interrupts (the ones described in
iic_is/iic_irr), I'm still working on a proper way to expose these. They
are essentially a cascaded controller by themselves (sic !) though I may
just handle them locally to the iic driver. I need also to sync with
David Erb on the way he hooked in the performance monitor interrupt.

So that's all for 2.6.17 and I'll do more work on that with my rework of
the powerpc interrupt layer that I'm hacking on at the moment.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21 15:01:29 +10:00
Arnd Bergmann
6fb8f3acbe [PATCH] powerpc: update cell_defconfig
reflect the changes to Kconfig since the last update.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-29 15:11:30 +10:00
Arnd Bergmann
1a19f85584 [PATCH] powerpc: update cell defconfig
The default configuration in mainline got a little out of
sync with what we use internally.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 14:48:16 +11:00
Paul Mackerras
1ae5db3742 powerpc: update defconfigs
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16 16:55:08 +11:00
Jesse Brandeburg
35ec56bb78 [PATCH] e1000: Added disable packet split capability
Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware.  Made this a CONFIG option and modified the Kconfig, to reflect the new option.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18 16:17:57 -05:00
Paul Mackerras
5a1244e9dd powerpc: update defconfigs
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-20 16:00:17 +11:00
Benjamin Herrenschmidt
5444a5e9e8 [PATCH] powerpc: update defconfigs
My patch moving ppc64 RTC to genrtc was supposed to update all
defconfigs, but for some reason, the patch actually posted only had the
pseries one... ouch. This patch properly updates all defconfigs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-16 13:28:32 +11:00
Michael Ellerman
60d4f4c656 powerpc: Copy default configs into arch/powerpc/configs
Copy default configs into arch/powerpc/configs, rename bpa_defconfig to
cell_defconfig while we're at it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 15:24:57 +11:00