Commit Graph

14986 Commits

Author SHA1 Message Date
Rusty Russell
d7e28ffe6c lguest: the host code
This is the code for the "lg.ko" module, which allows lguest guests to
be launched.

[akpm@linux-foundation.org: update for futex-new-private-futexes]
[akpm@linux-foundation.org: build fix]
[jmorris@namei.org: lguest: use hrtimers]
[akpm@linux-foundation.org: x86_64 build fix]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:52 -07:00
Rusty Russell
07ad157f6e lguest: the guest code
lguest is a simple hypervisor for Linux on Linux.  Unlike kvm it doesn't need
VT/SVM hardware.  Unlike Xen it's simply "modprobe and go".  Unlike both, it's
5000 lines and self-contained.

Performance is ok, but not great (-30% on kernel compile).  But given its
hackability, I expect this to improve, along with the paravirt_ops code which
it supplies a complete example for.  There's also a 64-bit version being
worked on and other craziness.

But most of all, lguest is awesome fun!  Too much of the kernel is a big ball
of hair.  lguest is simple enough to dive into and hack, plus has some warts
which scream "fork me!".

This patch:

This is the code and headers required to make an i386 kernel an lguest guest.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:52 -07:00
J. Bruce Fields
c7d51402d2 knfsd: clean up EX_RDONLY
Share a little common code, reverse the arguments for consistency, drop the
unnecessary "inline", and lowercase the name.

Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:52 -07:00
J. Bruce Fields
e22841c637 knfsd: move EX_RDONLY out of header
EX_RDONLY is only called in one place; just put it there.

Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:52 -07:00
Andrew Morton
d688abf50b move page writeback acounting out of macros
page-writeback accounting is presently performed in the page-flags macros.
This is inconsistent and a bit ugly and makes it awkward to implement
per-backing_dev under-writeback page accounting.

So move this accounting down to the callsite(s).

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:52 -07:00
Greg Ungerer
10146801e8 m68knommu: remove is_in_rom() function
Remove is_in_rom() function.  It doesn't actually serve the purpose it was
intended to.  If you look at the use of it _access_ok() (which is the only use
of it) then it is obvious that most of memory is marked as access_ok.  No
point having is_in_rom() then, so remove it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:51 -07:00
Greg Ungerer
2502b667ea m68knommu: generic irq handling
Change the m68knommu irq handling to use the generic irq framework.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:50 -07:00
Johannes Berg
3b5ad0797c stacktrace: fix header file for !CONFIG_STACKTRACE
The print_stack_trace macro in stacktrace.h has a wrong number of
arguments, fix it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:49 -07:00
Peter Zijlstra
96645678cd lockstat: measure lock bouncing
__acquire
        |
       lock _____
        |        \
        |    __contended
        |         |
        |        wait
        | _______/
        |/
        |
   __acquired
        |
   __release
        |
     unlock

We measure acquisition and contention bouncing.

This is done by recording a cpu stamp in each lock instance.

Contention bouncing requires the cpu stamp to be set on acquisition. Hence we
move __acquired into the generic path.

__acquired is then used to measure acquisition bouncing by comparing the
current cpu with the old stamp before replacing it.

__contended is used to measure contention bouncing (only useful for preemptable
locks)

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:49 -07:00
Peter Zijlstra
4b32d0a4e9 lockdep: various fixes
- update the copyright notices
 - use the default hash function
 - fix a thinko in a BUILD_BUG_ON
 - add a WARN_ON to spot inconsitent naming
 - fix a termination issue in /proc/lock_stat

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:49 -07:00
Peter Zijlstra
f20786ff4d lockstat: core infrastructure
Introduce the core lock statistics code.

Lock statistics provides lock wait-time and hold-time (as well as the count
of corresponding contention and acquisitions events). Also, the first few
call-sites that encounter contention are tracked.

Lock wait-time is the time spent waiting on the lock. This provides insight
into the locking scheme, that is, a heavily contended lock is indicative of
a too coarse locking scheme.

Lock hold-time is the duration the lock was held, this provides a reference for
the wait-time numbers, so they can be put into perspective.

  1)
    lock
  2)
    ... do stuff ..
    unlock
  3)

The time between 1 and 2 is the wait-time. The time between 2 and 3 is the
hold-time.

The lockdep held-lock tracking code is reused, because it already collects locks
into meaningful groups (classes), and because it is an existing infrastructure
for lock instrumentation.

Currently lockdep tracks lock acquisition with two hooks:

  lock()
    lock_acquire()
    _lock()

 ... code protected by lock ...

  unlock()
    lock_release()
    _unlock()

We need to extend this with two more hooks, in order to measure contention.

  lock_contended() - used to measure contention events
  lock_acquired()  - completion of the contention

These are then placed the following way:

  lock()
    lock_acquire()
    if (!_try_lock())
      lock_contended()
      _lock()
      lock_acquired()

 ... do locked stuff ...

  unlock()
    lock_release()
    _unlock()

(Note: the try_lock() 'trick' is used to avoid instrumenting all platform
       dependent lock primitive implementations.)

It is also possible to toggle the two lockdep features at runtime using:

  /proc/sys/kernel/prove_locking
  /proc/sys/kernel/lock_stat

(esp. turning off the O(n^2) prove_locking functionaliy can help)

[akpm@linux-foundation.org: build fixes]
[akpm@linux-foundation.org: nuke unneeded ifdefs]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:49 -07:00
Peter Zijlstra
21f8ca3bf6 fix raw_spinlock_t vs lockdep
Use the lockdep infrastructure to track lock contention and other lock
statistics.

It tracks lock contention events, and the first four unique call-sites that
encountered contention.

It also measures lock wait-time and hold-time in nanoseconds. The minimum and
maximum times are tracked, as well as a total (which together with the number
of event can give the avg).

All statistics are done per lock class, per write (exclusive state) and per read
(shared state).

The statistics are collected per-cpu, so that the collection overhead is
minimized via having no global cachemisses.

This new lock statistics feature is independent of the lock dependency checking
traditionally done by lockdep; it just shares the lock tracking code. It is
also possible to enable both and runtime disabled either component - thereby
avoiding the O(n^2) lock chain walks for instance.

This patch:

raw_spinlock_t should not use lockdep (and doesn't) since lockdep itself
relies on it.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:49 -07:00
Jan Harkes
3cf01f28c3 coda: remove statistics counters from /proc/fs/coda
Similar information can easily be obtained with strace -c.

Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:48 -07:00
Jan Harkes
a1b0aa8764 coda: remove struct coda_sb_info
The sb_info structure only contains a single pointer to the character device,
there is no need for the added indirection.

Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:48 -07:00
Jan Harkes
d9664c95af coda: block signals during upcall processing
We ignore signals for about 30 seconds to give userspace a chance to see the
upcall.  As we did not block signals we ended up in a busy loop for the
remainder of the period when a signal is received.

Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:48 -07:00
Roland McGrath
cbe87121f1 i386: Put allocated ELF notes in read-only data segment
This changes the i386 linker script and the asm-generic macro it uses so that
ELF note sections with SHF_ALLOC set are linked into the kernel image along
with other read-only data.  The PT_NOTE also points to their location.

This paves the way for putting useful build-time information into ELF notes
that can be found easily later in a kernel memory dump.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:47 -07:00
Kawai, Hidehiro
3cb4a0bb1e coredump masking: add an interface for core dump filter
This patch adds an interface to set/reset flags which determines each memory
segment should be dumped or not when a core file is generated.

/proc/<pid>/coredump_filter file is provided to access the flags.  You can
change the flag status for a particular process by writing to or reading from
the file.

The flag status is inherited to the child process when it is created.

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:47 -07:00
Kawai, Hidehiro
6c5d523826 coredump masking: reimplementation of dumpable using two flags
This patch changes mm_struct.dumpable to a pair of bit flags.

set_dumpable() converts three-value dumpable to two flags and stores it into
lower two bits of mm_struct.flags instead of mm_struct.dumpable.
get_dumpable() behaves in the opposite way.

[akpm@linux-foundation.org: export set_dumpable]
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:46 -07:00
Josef 'Jeff' Sipek
f79c20f525 fs: remove path_walk export
Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:45 -07:00
Josef 'Jeff' Sipek
c4a7808fc3 fs: mark link_path_walk static
Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:45 -07:00
Josef 'Jeff' Sipek
16f1820028 fs: introduce vfs_path_lookup
Stackable file systems, among others, frequently need to lookup paths or
path components starting from an arbitrary point in the namespace
(identified by a dentry and a vfsmount).  Currently, such file systems use
lookup_one_len, which is frowned upon [1] as it does not pass the lookup
intent along; not passing a lookup intent, for example, can trigger BUG_ON's
when stacking on top of NFSv4.

The first patch introduces a new lookup function to allow lookup starting
from an arbitrary point in the namespace.  This approach has been suggested
by Christoph Hellwig [2].

The second patch changes sunrpc to use vfs_path_lookup.

The third patch changes nfsctl.c to use vfs_path_lookup.

The fourth patch marks link_path_walk static.

The fifth, and last patch, unexports path_walk because it is no longer
unnecessary to call it directly, and using the new vfs_path_lookup is
cleaner.

For example, the following snippet of code, looks up "some/path/component"
in a directory pointed to by parent_{dentry,vfsmnt}:

err = vfs_path_lookup(parent_dentry, parent_vfsmnt,
		      "some/path/component", 0, &nd);
if (!err) {
	/* exits */

	...

	/* once done, release the references */
	path_release(&nd);
} else if (err == -ENOENT) {
	/* doesn't exist */
} else {
	/* other error */
}

VFS functions such as lookup_create can be used on the nameidata structure
to pass the create intent to the file system.

Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:45 -07:00
Ollie Wild
b6a2fea393 mm: variable length argument support
Remove the arg+env limit of MAX_ARG_PAGES by copying the strings directly from
the old mm into the new mm.

We create the new mm before the binfmt code runs, and place the new stack at
the very top of the address space.  Once the binfmt code runs and figures out
where the stack should be, we move it downwards.

It is a bit peculiar in that we have one task with two mm's, one of which is
inactive.

[a.p.zijlstra@chello.nl: limit stack size]
Signed-off-by: Ollie Wild <aaw@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-arch@vger.kernel.org>
Cc: Hugh Dickins <hugh@veritas.com>
[bunk@stusta.de: unexport bprm_mm_init]
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:45 -07:00
Peter Zijlstra
bdf4c48af2 audit: rework execve audit
The purpose of audit_bprm() is to log the argv array to a userspace daemon at
the end of the execve system call.  Since user-space hasn't had time to run,
this array is still in pristine state on the process' stack; so no need to
copy it, we can just grab it from there.

In order to minimize the damage to audit_log_*() copy each string into a
temporary kernel buffer first.

Currently the audit code requires that the full argument vector fits in a
single packet.  So currently it does clip the argv size to a (sysctl) limit,
but only when execve auditing is enabled.

If the audit protocol gets extended to allow for multiple packets this check
can be removed.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ollie Wild <aaw@google.com>
Cc: <linux-audit@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:45 -07:00
Peter Zijlstra
b111757c50 arch: personality independent stack top
New arch macro STACK_TOP_MAX it gives the larges valid stack address for the
architecture in question.

It differs from STACK_TOP in that it will not distinguish between
personalities but will always return the largest possible address.

This is used to create the initial stack on execve, which we will move down to
the proper location once the binfmt code has figured out where that is.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ollie Wild <aaw@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:45 -07:00
Fenghua Yu
5fb7dc37dc define new percpu interface for shared data
per cpu data section contains two types of data.  One set which is
exclusively accessed by the local cpu and the other set which is per cpu,
but also shared by remote cpus.  In the current kernel, these two sets are
not clearely separated out.  This can potentially cause the same data
cacheline shared between the two sets of data, which will result in
unnecessary bouncing of the cacheline between cpus.

One way to fix the problem is to cacheline align the remotely accessed per
cpu data, both at the beginning and at the end.  Because of the padding at
both ends, this will likely cause some memory wastage and also the
interface to achieve this is not clean.

This patch:

Moves the remotely accessed per cpu data (which is currently marked
as ____cacheline_aligned_in_smp) into a different section, where all the data
elements are cacheline aligned. And as such, this differentiates the local
only data and remotely accessed data cleanly.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Michael Ellerman
3d7e33825d jprobes: make jprobes a little safer for users
I realise jprobes are a razor-blades-included type of interface, but that
doesn't mean we can't try and make them safer to use.  This guy I know once
wrote code like this:

struct jprobe jp = { .kp.symbol_name = "foo", .entry = "jprobe_foo" };

And then his kernel exploded. Oops.

This patch adds an arch hook, arch_deref_entry_point() (I don't like it
either) which takes the void * in a struct jprobe, and gives back the text
address that it represents.

We can then use that in register_jprobe() to check that the entry point we're
passed is actually in the kernel text, rather than just some random value.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Michael Ellerman
9e367d8592 jprobes: remove JPROBE_ENTRY()
AFAICT now that jprobe.entry is a void *, JPROBE_ENTRY doesn't do anything
useful - so remove it ..

I've left a do-nothing version so that out-of-tree jprobes code will still
compile without modifications.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Michael Ellerman
81eae375ec jprobes: make struct jprobe.entry a void *
Currently jprobe.entry is a kprobe_opcode_t *, but that's a lie.  On some
platforms it doesn't point to an opcode at all, it points to a function
descriptor.

It's really a pointer to something that the arch code can turn into a function
entry point.  And that's what actually happens, none of the generic code ever
looks at jprobe.entry, it's only ever dereferenced by arch code.

So just make it a void *.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Fengguang Wu
f9acc8c7b3 readahead: sanify file_ra_state names
Rename some file_ra_state variables and remove some accessors.

It results in much simpler code.
Kudos to Rusty!

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Rusty Russell
cf914a7d65 readahead: split ondemand readahead interface into two functions
Split ondemand readahead interface into two functions.  I think this makes it
a little clearer for non-readahead experts (like Rusty).

Internally they both call ondemand_readahead(), but the page argument is
changed to an obvious boolean flag.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Fengguang Wu
fe3cba17c4 mm: share PG_readahead and PG_reclaim
Share the same page flag bit for PG_readahead and PG_reclaim.

One is used only on file reads, another is only for emergency writes.  One
is used mostly for fresh/young pages, another is for old pages.

Combinations of possible interactions are:

a) clear PG_reclaim => implicit clear of PG_readahead
	it will delay an asynchronous readahead into a synchronous one
	it actually does _good_ for readahead:
		the pages will be reclaimed soon, it's readahead thrashing!
		in this case, synchronous readahead makes more sense.

b) clear PG_readahead => implicit clear of PG_reclaim
	one(and only one) page will not be reclaimed in time
	it can be avoided by checking PageWriteback(page) in readahead first

c) set PG_reclaim => implicit set of PG_readahead
	will confuse readahead and make it restart the size rampup process
	it's a trivial problem, and can mostly be avoided by checking
	PageWriteback(page) first in readahead

d) set PG_readahead => implicit set of PG_reclaim
	PG_readahead will never be set on already cached pages.
	PG_reclaim will always be cleared on dirtying a page.
	so not a problem.

In summary,
	a)   we get better behavior
	b,d) possible interactions can be avoided
	c)   racy condition exists that might affect readahead, but the chance
	     is _really_ low, and the hurt on readahead is trivial.

Compound pages also use PG_reclaim, but for now they do not interact with
reclaim/readahead code.

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Fengguang Wu
c743d96b6d readahead: remove the old algorithm
Remove the old readahead algorithm.

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Fengguang Wu
122a21d11c readahead: on-demand readahead logic
This is a minimal readahead algorithm that aims to replace the current one.
It is more flexible and reliable, while maintaining almost the same behavior
and performance.  Also it is full integrated with adaptive readahead.

It is designed to be called on demand:
	- on a missing page, to do synchronous readahead
	- on a lookahead page, to do asynchronous readahead

In this way it eliminated the awkward workarounds for cache hit/miss,
readahead thrashing, retried read, and unaligned read.  It also adopts the
data structure introduced by adaptive readahead, parameterizes readahead
pipelining with `lookahead_index', and reduces the current/ahead windows to
one single window.

HEURISTICS

The logic deals with four cases:

	- sequential-next
		found a consistent readahead window, so push it forward

	- random
		standalone small read, so read as is

	- sequential-first
		create a new readahead window for a sequential/oversize request

	- lookahead-clueless
		hit a lookahead page not associated with the readahead window,
		so create a new readahead window and ramp it up

In each case, three parameters are determined:

	- readahead index: where the next readahead begins
	- readahead size:  how much to readahead
	- lookahead size:  when to do the next readahead (for pipelining)

BEHAVIORS

The old behaviors are maximally preserved for trivial sequential/random reads.
Notable changes are:

	- It no longer imposes strict sequential checks.
	  It might help some interleaved cases, and clustered random reads.
	  It does introduce risks of a random lookahead hit triggering an
	  unexpected readahead. But in general it is more likely to do good
	  than to do evil.

	- Interleaved reads are supported in a minimal way.
	  Their chances of being detected and proper handled are still low.

	- Readahead thrashings are better handled.
	  The current readahead leads to tiny average I/O sizes, because it
	  never turn back for the thrashed pages.  They have to be fault in
	  by do_generic_mapping_read() one by one.  Whereas the on-demand
	  readahead will redo readahead for them.

OVERHEADS

The new code reduced the overheads of

	- excessively calling the readahead routine on small sized reads
	  (the current readahead code insists on seeing all requests)

	- doing a lot of pointless page-cache lookups for small cached files
	  (the current readahead only turns itself off after 256 cache hits,
	  unfortunately most files are < 1MB, so never see that chance)

That accounts for speedup of
	- 0.3% on 1-page sequential reads on sparse file
	- 1.2% on 1-page cache hot sequential reads
	- 3.2% on 256-page cache hot sequential reads
	- 1.3% on cache hot `tar /lib`

However, it does introduce one extra page-cache lookup per cache miss, which
impacts random reads slightly. That's 1% overheads for 1-page random reads on
sparse file.

PERFORMANCE

The basic benchmark setup is
	- 2.6.20 kernel with on-demand readahead
	- 1MB max readahead size
	- 2.9GHz Intel Core 2 CPU
	- 2GB memory
	- 160G/8M Hitachi SATA II 7200 RPM disk

The benchmarks show that
	- it maintains the same performance for trivial sequential/random reads
	- sysbench/OLTP performance on MySQL gains up to 8%
	- performance on readahead thrashing gains up to 3 times

iozone throughput (KB/s): roughly the same
==========================================
iozone -c -t1 -s 4096m -r 64k

			       2.6.20          on-demand      gain
first run
	  "  Initial write "   61437.27        64521.53      +5.0%
	  "        Rewrite "   47893.02        48335.20      +0.9%
	  "           Read "   62111.84        62141.49      +0.0%
	  "        Re-read "   62242.66        62193.17      -0.1%
	  "   Reverse Read "   50031.46        49989.79      -0.1%
	  "    Stride read "    8657.61         8652.81      -0.1%
	  "    Random read "   13914.28        13898.23      -0.1%
	  " Mixed workload "   19069.27        19033.32      -0.2%
	  "   Random write "   14849.80        14104.38      -5.0%
	  "         Pwrite "   62955.30        65701.57      +4.4%
	  "          Pread "   62209.99        62256.26      +0.1%

second run
	  "  Initial write "   60810.31        66258.69      +9.0%
	  "        Rewrite "   49373.89        57833.66     +17.1%
	  "           Read "   62059.39        62251.28      +0.3%
	  "        Re-read "   62264.32        62256.82      -0.0%
	  "   Reverse Read "   49970.96        50565.72      +1.2%
	  "    Stride read "    8654.81         8638.45      -0.2%
	  "    Random read "   13901.44        13949.91      +0.3%
	  " Mixed workload "   19041.32        19092.04      +0.3%
	  "   Random write "   14019.99        14161.72      +1.0%
	  "         Pwrite "   64121.67        68224.17      +6.4%
	  "          Pread "   62225.08        62274.28      +0.1%

In summary, writes are unstable, reads are pretty close on average:

			  access pattern  2.6.20  on-demand   gain
				   Read  62085.61  62196.38  +0.2%
				Re-read  62253.49  62224.99  -0.0%
			   Reverse Read  50001.21  50277.75  +0.6%
			    Stride read   8656.21   8645.63  -0.1%
			    Random read  13907.86  13924.07  +0.1%
	 		 Mixed workload  19055.29  19062.68  +0.0%
				  Pread  62217.53  62265.27  +0.1%

aio-stress: roughly the same
============================
aio-stress -l -s4096 -r128 -t1 -o1 knoppix511-dvd-cn.iso
aio-stress -l -s4096 -r128 -t1 -o3 knoppix511-dvd-cn.iso

					2.6.20      on-demand  delta
			sequential	 92.57s      92.54s    -0.0%
			random		311.87s     312.15s    +0.1%

sysbench fileio: roughly the same
=================================
sysbench --test=fileio --file-io-mode=async --file-test-mode=rndrw \
	 --file-total-size=4G --file-block-size=64K \
	 --num-threads=001 --max-requests=10000 --max-time=900 run

				threads    2.6.20   on-demand    delta
		first run
				      1   59.1974s    59.2262s  +0.0%
				      2   58.0575s    58.2269s  +0.3%
				      4   48.0545s    47.1164s  -2.0%
				      8   41.0684s    41.2229s  +0.4%
				     16   35.8817s    36.4448s  +1.6%
				     32   32.6614s    32.8240s  +0.5%
				     64   23.7601s    24.1481s  +1.6%
				    128   24.3719s    23.8225s  -2.3%
				    256   23.2366s    22.0488s  -5.1%

		second run
				      1   59.6720s    59.5671s  -0.2%
				      8   41.5158s    41.9541s  +1.1%
				     64   25.0200s    23.9634s  -4.2%
				    256   22.5491s    20.9486s  -7.1%

Note that the numbers are not very stable because of the writes.
The overall performance is close when we sum all seconds up:

                sum all up               495.046s    491.514s   -0.7%

sysbench oltp (trans/sec): up to 8% gain
========================================
sysbench --test=oltp --oltp-table-size=10000000 --oltp-read-only \
	 --mysql-socket=/var/run/mysqld/mysqld.sock \
	 --mysql-user=root --mysql-password=readahead \
	 --num-threads=064 --max-requests=10000 --max-time=900 run

	10000-transactions run
				threads    2.6.20   on-demand    gain
				      1     62.81       64.56   +2.8%
				      2     67.97       70.93   +4.4%
				      4     81.81       85.87   +5.0%
				      8     94.60       97.89   +3.5%
				     16     99.07      104.68   +5.7%
				     32     95.93      104.28   +8.7%
				     64     96.48      103.68   +7.5%
	5000-transactions run
				      1     48.21       48.65   +0.9%
				      8     68.60       70.19   +2.3%
				     64     70.57       74.72   +5.9%
	2000-transactions run
				      1     37.57       38.04   +1.3%
				      2     38.43       38.99   +1.5%
				      4     45.39       46.45   +2.3%
				      8     51.64       52.36   +1.4%
				     16     54.39       55.18   +1.5%
				     32     52.13       54.49   +4.5%
				     64     54.13       54.61   +0.9%

That's interesting results. Some investigations show that
	- MySQL is accessing the db file non-uniformly: some parts are
	  more hot than others
	- It is mostly doing 4-page random reads, and sometimes doing two
	  reads in a row, the latter one triggers a 16-page readahead.
	- The on-demand readahead leaves many lookahead pages (flagged
	  PG_readahead) there. Many of them will be hit, and trigger
	  more readahead pages. Which might save more seeks.
	- Naturally, the readahead windows tend to lie in hot areas,
	  and the lookahead pages in hot areas is more likely to be hit.
	- The more overall read density, the more possible gain.

That also explains the adaptive readahead tricks for clustered random reads.

readahead thrashing: 3 times better
===================================
We boot kernel with "mem=128m single", and start a 100KB/s stream on every
second, until reaching 200 streams.

			      max throughput     min avg I/O size
		2.6.20:            5MB/s               16KB
		on-demand:        15MB/s              140KB

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Fengguang Wu
5ce1110b92 readahead: data structure and routines
Extend struct file_ra_state to support the on-demand readahead logic.  Also
define some helpers for it.

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Fengguang Wu
d77c2d7cc5 readahead: introduce PG_readahead
Introduce a new page flag: PG_readahead.

It acts as a look-ahead mark, which tells the page reader: Hey, it's time to
invoke the read-ahead logic.  For the sake of I/O pipelining, don't wait until
it runs out of cached pages!

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Steven Pratt <slpratt@austin.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:43 -07:00
David Brownell
2ba2d00363 AIO sparse fix (type of ki_flags)
Fix type issue reported by latest 'sparse': kiocb.ki_flags should be
"unsigned long" (not "long"), to match bitop type signature.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:43 -07:00
Akinobu Mita
e53252d97e unregister_chrdev() return void
unregister_chrdev() does not return meaningful value.  This patch makes it
return void like most unregister_* functions.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:43 -07:00
Pavel Machek
77afcf78a2 PM: Integrate beeping flag with existing acpi_sleep flags
Move "debug during resume from s2ram" into the variable we already use
for real-mode flags to simplify code. It also closes nasty trap for
the user in acpi_sleep_setup; order of parameters actually mattered there,
acpi_sleep=s3_bios,s3_mode doing something different from
acpi_sleep=s3_mode,s3_bios.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:43 -07:00
Nigel Cunningham
5a60d6235c PM: Optional beeping during resume from suspend to RAM
Add a feature allowing the user to make the system beep during a resume from
suspend to RAM, on x86_64 and i386.

This is useful for the users with broken resume from RAM, so that they can
verify if the control reaches the kernel after a wake-up event.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:43 -07:00
Rafael J. Wysocki
bd804eba1c PM: Introduce pm_power_off_prepare
Introduce the pm_power_off_prepare() callback that can be registered by the
interested platforms in analogy with pm_idle() and pm_power_off(), used for
preparing the system to power off (needed by ACPI).

This allows us to drop acpi_sysclass and device_acpi that are only defined in
order to register the ACPI power off preparation callback, which is needed by
pm_power_off() registered in a much different way.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:42 -07:00
Rafael J. Wysocki
b10d911749 PM: introduce hibernation and suspend notifiers
Make it possible to register hibernation and suspend notifiers, so that
subsystems can perform hibernation-related or suspend-related operations that
should not be carried out by device drivers' .suspend() and .resume()
routines.

[akpm@linux-foundation.org: build fixes]
[akpm@linux-foundation.org: cleanups]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:42 -07:00
Rafael J. Wysocki
0c1eecfb34 Freezer: avoid freezing kernel threads prematurely
Kernel threads should not have TIF_FREEZE set when user space processes are
being frozen, since otherwise some of them might be frozen prematurely.
To prevent this from happening we can (1) make exit_mm() unset TIF_FREEZE
unconditionally just after clearing tsk->mm and (2) make try_to_freeze_tasks()
check if p->mm is different from zero and PF_BORROWED_MM is unset in p->flags
when user space processes are to be frozen.

Namely, when user space processes are being frozen, we only should set
TIF_FREEZE for tasks that have p->mm different from NULL and don't have
PF_BORROWED_MM set in p->flags.  For this reason task_lock() must be used to
prevent try_to_freeze_tasks() from racing with use_mm()/unuse_mm(), in which
p->mm and p->flags.PF_BORROWED_MM are changed under task_lock(p).  Also, we
need to prevent the following scenario from happening:

* daemonize() is called by a task spawned from a user space code path
* freezer checks if the task has p->mm set and the result is positive
* task enters exit_mm() and clears its TIF_FREEZE
* freezer sets TIF_FREEZE for the task
* task calls try_to_freeze() and goes to the refrigerator, which is wrong at
  that point

This requires us to acquire task_lock(p) before p->flags.PF_BORROWED_MM and
p->mm are examined and release it after TIF_FREEZE is set for p (or it turns
out that TIF_FREEZE should not be set).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:42 -07:00
Rafael J. Wysocki
a634cc1016 swsusp: introduce restore platform operations
At least on some machines it is necessary to prepare the ACPI firmware for the
restoration of the system memory state from the hibernation image if the
"platform" mode of hibernation has been used.  Namely, in that cases we need
to disable the GPEs before replacing the "boot" kernel with the "frozen"
kernel (cf.  http://bugzilla.kernel.org/show_bug.cgi?id=7887).  After the
restore they will be re-enabled by hibernation_ops->finish(), but if the
restore fails, they have to be re-enabled by the restore code explicitly.

For this purpose we can introduce two additional hibernation operations,
called pre_restore() and restore_cleanup() and call them from the restore code
path.  Still, they should be called if the "platform" mode of hibernation has
been used, so we need to pass the information about the hibernation mode from
the "frozen" kernel to the "boot" kernel in the image header.

Apparently, we can't drop the disabling of GPEs before the restore because of
Bug #7887 .   We also can't do it unconditionally, because the GPEs wouldn't
have been enabled after a successful restore if the suspend had been done in
the 'shutdown' or 'reboot' mode.

In principle we could (and probably should) unconditionally disable the GPEs
before each snapshot creation *and* before the restore, but then we'd have to
unconditionally enable them after the snapshot creation as well as after the
restore (or restore failure)   Still, for this purpose we'd need to modify
acpi_enter_sleep_state_prep() and acpi_leave_sleep_state() and we'd have to
introduce some mechanism synchronizing the disablind/enabling of the GPEs with
the device drivers' .suspend()/.resume() routines and with
disable_/enable_nonboot_cpus().   However, this would have affected the
suspend (ie.  s2ram) code as well as the hibernation, which I'd like to avoid
in this patch series.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:42 -07:00
Mel Gorman
bb2d5ce164 Remove alloc_zeroed_user_highpage()
alloc_zeroed_user_highpage() has no in-tree users and it is not exported.
As it is not exported, it can simply be removed.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Nick Piggin
83c54070ee mm: fault feedback #2
This patch completes Linus's wish that the fault return codes be made into
bit flags, which I agree makes everything nicer.  This requires requires
all handle_mm_fault callers to be modified (possibly the modifications
should go further and do things like fault accounting in handle_mm_fault --
however that would be for another patch).

[akpm@linux-foundation.org: fix alpha build]
[akpm@linux-foundation.org: fix s390 build]
[akpm@linux-foundation.org: fix sparc build]
[akpm@linux-foundation.org: fix sparc64 build]
[akpm@linux-foundation.org: fix ia64 build]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Still apparently needs some ARM and PPC loving - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Nick Piggin
d0217ac04c mm: fault feedback #1
Change ->fault prototype.  We now return an int, which contains
VM_FAULT_xxx code in the low byte, and FAULT_RET_xxx code in the next byte.
 FAULT_RET_ code tells the VM whether a page was found, whether it has been
locked, and potentially other things.  This is not quite the way he wanted
it yet, but that's changed in the next patch (which requires changes to
arch code).

This means we no longer set VM_CAN_INVALIDATE in the vma in order to say
that a page is locked which requires filemap_nopage to go away (because we
can no longer remain backward compatible without that flag), but we were
going to do that anyway.

struct fault_data is renamed to struct vm_fault as Linus asked. address
is now a void __user * that we should firmly encourage drivers not to use
without really good reason.

The page is now returned via a page pointer in the vm_fault struct.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Nick Piggin
54cb8821de mm: merge populate and nopage into fault (fixes nonlinear)
Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes
the virtual address -> file offset differently from linear mappings.

->populate is a layering violation because the filesystem/pagecache code
should need to know anything about the virtual memory mapping.  The hitch here
is that the ->nopage handler didn't pass down enough information (ie.  pgoff).
 But it is more logical to pass pgoff rather than have the ->nopage function
calculate it itself anyway (because that's a similar layering violation).

Having the populate handler install the pte itself is likewise a nasty thing
to be doing.

This patch introduces a new fault handler that replaces ->nopage and
->populate and (later) ->nopfn.  Most of the old mechanism is still in place
so there is a lot of duplication and nice cleanups that can be removed if
everyone switches over.

The rationale for doing this in the first place is that nonlinear mappings are
subject to the pagefault vs invalidate/truncate race too, and it seemed stupid
to duplicate the synchronisation logic rather than just consolidate the two.

After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in
pagecache.  Seems like a fringe functionality anyway.

NOPAGE_REFAULT is removed.  This should be implemented with ->fault, and no
users have hit mainline yet.

[akpm@linux-foundation.org: cleanup]
[randy.dunlap@oracle.com: doc. fixes for readahead]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Nick Piggin
d00806b183 mm: fix fault vs invalidate race for linear mappings
Fix the race between invalidate_inode_pages and do_no_page.

Andrea Arcangeli identified a subtle race between invalidation of pages from
pagecache with userspace mappings, and do_no_page.

The issue is that invalidation has to shoot down all mappings to the page,
before it can be discarded from the pagecache.  Between shooting down ptes to
a particular page, and actually dropping the struct page from the pagecache,
do_no_page from any process might fault on that page and establish a new
mapping to the page just before it gets discarded from the pagecache.

The most common case where such invalidation is used is in file truncation.
This case was catered for by doing a sort of open-coded seqlock between the
file's i_size, and its truncate_count.

Truncation will decrease i_size, then increment truncate_count before
unmapping userspace pages; do_no_page will read truncate_count, then find the
page if it is within i_size, and then check truncate_count under the page
table lock and back out and retry if it had subsequently been changed (ptl
will serialise against unmapping, and ensure a potentially updated
truncate_count is actually visible).

Complexity and documentation issues aside, the locking protocol fails in the
case where we would like to invalidate pagecache inside i_size.  do_no_page
can come in anytime and filemap_nopage is not aware of the invalidation in
progress (as it is when it is outside i_size).  The end result is that
dangling (->mapping == NULL) pages that appear to be from a particular file
may be mapped into userspace with nonsense data.  Valid mappings to the same
place will see a different page.

Andrea implemented two working fixes, one using a real seqlock, another using
a page->flags bit.  He also proposed using the page lock in do_no_page, but
that was initially considered too heavyweight.  However, it is not a global or
per-file lock, and the page cacheline is modified in do_no_page to increment
_count and _mapcount anyway, so a further modification should not be a large
performance hit.  Scalability is not an issue.

This patch implements this latter approach.  ->nopage implementations return
with the page locked if it is possible for their underlying file to be
invalidated (in that case, they must set a special vm_flags bit to indicate
so).  do_no_page only unlocks the page after setting up the mapping
completely.  invalidation is excluded because it holds the page lock during
invalidation of each page (and ensures that the page is not mapped while
holding the lock).

This also allows significant simplifications in do_no_page, because we have
the page locked in the right place in the pagecache from the start.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
Linus Torvalds
ce524c8360 Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  eHEA: Fix bonding support
  Blackfin ethernet driver: on chip ethernet MAC controller driver
  fix wrong argument of tc35815_read_plat_dev_addr()
  ARM/ETHER3: Handle multicast frames.
  SAA9730: Handle multicast frames.
  NI5010: Handle multicast frames.
  NS83820: Handle multicast frames.
  Fix RGMII-ID handling in gianfar
  Fix Vitesse RGMII-ID support
  Add phy-connection-type to gianfar nodes
  Fix Vitesse 824x PHY interrupt acking
  [PATCH] zd1211rw: Add ID for Siemens Gigaset USB Stick 54
  [PATCH] zd1211rw: Add ID for Planex GW-US54GXS
  [PATCH] Update version ipw2200 stamp to 1.2.2
  [PATCH] ipw2200: Fix ipw_isr() comments error on shared IRQ
  [PATCH] Fix ipw2200 set wrong power parameter causing firmware error
  [PATCH] ipw2100: Fix `iwpriv set_power` error
  [PATCH] softmac: Channel is listed twice in scan output
2007-07-18 18:33:45 -07:00
Linus Torvalds
29e7ee378e Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  sysfs: cosmetic clean up on node creation failure paths
  sysfs: kill an extra put in sysfs_create_link() failure path
  Driver core: check return code of sysfs_create_link()
  HOWTO: Add the knwon_regression URI to the documentation
  dev_vdbg() documentation
  dev_vdbg(), available with -DVERBOSE_DEBUG
  sysfs: make sysfs_init_inode() static
  sysfs: fix sysfs root inode nlink accounting
  Documentation fix devres.txt: lib/iomap.c -> lib/devres.c
  sysfs: avoid kmem_cache_free(NULL)
  PM: remove deprecated dpm_runtime_* routines
  PM: Remove deprecated sysfs files
  Driver core: accept all valid action-strings in uevent-trigger
  debugfs: remove rmdir() non-empty complaint
2007-07-18 18:28:08 -07:00