Commit Graph

441 Commits

Author SHA1 Message Date
Eric Paris
37dd0bd04a SELinux: properly handle empty tty_files list
SELinux has wrongly (since 2004) had an incorrect test for an empty
tty->tty_files list.  With an empty list selinux would be pointing to part
of the tty struct itself and would then proceed to dereference that value
and again dereference that result.  An F10 change to plymouth on a ppc64
system is actually currently triggering this bug.  This patch uses
list_empty() to handle empty lists rather than looking at a meaningless
location.

[note, this fixes the oops reported in
https://bugzilla.redhat.com/show_bug.cgi?id=469079]

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-01 09:38:48 +11:00
Thomas Gleixner
c465a76af6 Merge branches 'timers/clocksource', 'timers/hrtimers', 'timers/nohz', 'timers/ntp', 'timers/posixtimers' and 'timers/debug' into v28-timers-for-linus 2008-10-20 13:14:06 +02:00
Steven Whitehouse
a447c09324 vfs: Use const for kernel parser table
This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.

This was posted for review some time ago and I believe its been in -mm
since then.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13 10:10:37 -07:00
Linus Torvalds
8d71ff0bef Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (24 commits)
  integrity: special fs magic
  As pointed out by Jonathan Corbet, the timer must be deleted before
  ERROR: code indent should use tabs where possible
  The tpm_dev_release function is only called for platform devices, not pnp
  Protect tpm_chip_list when transversing it.
  Renames num_open to is_open, as only one process can open the file at a time.
  Remove the BKL calls from the TPM driver, which were added in the overall
  netlabel: Add configuration support for local labeling
  cipso: Add support for native local labeling and fixup mapping names
  netlabel: Changes to the NetLabel security attributes to allow LSMs to pass full contexts
  selinux: Cache NetLabel secattrs in the socket's security struct
  selinux: Set socket NetLabel based on connection endpoint
  netlabel: Add functionality to set the security attributes of a packet
  netlabel: Add network address selectors to the NetLabel/LSM domain mapping
  netlabel: Add a generic way to create ordered linked lists of network addrs
  netlabel: Replace protocol/NetLabel linking with refrerence counts
  smack: Fix missing calls to netlbl_skbuff_err()
  selinux: Fix missing calls to netlbl_skbuff_err()
  selinux: Fix a problem in security_netlbl_sid_to_secattr()
  selinux: Better local/forward check in selinux_ip_postroute()
  ...
2008-10-13 10:00:44 -07:00
Alan Cox
934e6ebf96 tty: Redo current tty locking
Currently it is sometimes locked by the tty mutex and sometimes by the
sighand lock. The latter is in fact correct and now we can hand back referenced
objects we can fix this up without problems around sleeping functions.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13 09:51:41 -07:00
Alan Cox
452a00d2ee tty: Make get_current_tty use a kref
We now return a kref covered tty reference. That ensures the tty structure
doesn't go away when you have a return from get_current_tty. This is not
enough to protect you from most of the resources being freed behind your
back - yet.

[Updated to include fixes for SELinux problems found by Andrew Morton and
 an s390 leak found while debugging the former]

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13 09:51:41 -07:00
James Morris
0da939b005 Merge branch 'master' of git://git.infradead.org/users/pcmoore/lblnet-2.6_next into next 2008-10-11 09:26:14 +11:00
Paul Moore
8d75899d03 netlabel: Changes to the NetLabel security attributes to allow LSMs to pass full contexts
This patch provides support for including the LSM's secid in addition to
the LSM's MLS information in the NetLabel security attributes structure.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
2008-10-10 10:16:33 -04:00
Paul Moore
6c5b3fc014 selinux: Cache NetLabel secattrs in the socket's security struct
Previous work enabled the use of address based NetLabel selectors, which
while highly useful, brought the potential for additional per-packet overhead
when used.  This patch attempts to mitigate some of that overhead by caching
the NetLabel security attribute struct within the SELinux socket security
structure.  This should help eliminate the need to recreate the NetLabel
secattr structure for each packet resulting in less overhead.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
2008-10-10 10:16:33 -04:00
Paul Moore
014ab19a69 selinux: Set socket NetLabel based on connection endpoint
Previous work enabled the use of address based NetLabel selectors, which while
highly useful, brought the potential for additional per-packet overhead when
used.  This patch attempts to solve that by applying NetLabel socket labels
when sockets are connect()'d.  This should alleviate the per-packet NetLabel
labeling for all connected sockets (yes, it even works for connected DGRAM
sockets).

Signed-off-by: Paul Moore <paul.moore@hp.com>
Reviewed-by: James Morris <jmorris@namei.org>
2008-10-10 10:16:33 -04:00
Paul Moore
948bf85c1b netlabel: Add functionality to set the security attributes of a packet
This patch builds upon the new NetLabel address selector functionality by
providing the NetLabel KAPI and CIPSO engine support needed to enable the
new packet-based labeling.  The only new addition to the NetLabel KAPI at
this point is shown below:

 * int netlbl_skbuff_setattr(skb, family, secattr)

... and is designed to be called from a Netfilter hook after the packet's
IP header has been populated such as in the FORWARD or LOCAL_OUT hooks.

This patch also provides the necessary SELinux hooks to support this new
functionality.  Smack support is not currently included due to uncertainty
regarding the permissions needed to expand the Smack network access controls.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Reviewed-by: James Morris <jmorris@namei.org>
2008-10-10 10:16:32 -04:00
Paul Moore
dfaebe9825 selinux: Fix missing calls to netlbl_skbuff_err()
At some point I think I messed up and dropped the calls to netlbl_skbuff_err()
which are necessary for CIPSO to send error notifications to remote systems.
This patch re-introduces the error handling calls into the SELinux code.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
2008-10-10 10:16:31 -04:00
Paul Moore
99d854d231 selinux: Fix a problem in security_netlbl_sid_to_secattr()
Currently when SELinux fails to allocate memory in
security_netlbl_sid_to_secattr() the NetLabel LSM domain field is set to
NULL which triggers the default NetLabel LSM domain mapping which may not
always be the desired mapping.  This patch fixes this by returning an error
when the kernel is unable to allocate memory.  This could result in more
failures on a system with heavy memory pressure but it is the "correct"
thing to do.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
2008-10-10 10:16:30 -04:00
Paul Moore
d8395c876b selinux: Better local/forward check in selinux_ip_postroute()
It turns out that checking to see if skb->sk is NULL is not a very good
indicator of a forwarded packet as some locally generated packets also have
skb->sk set to NULL.  Fix this by not only checking the skb->sk field but also
the IP[6]CB(skb)->flags field for the IP[6]SKB_FORWARDED flag.  While we are
at it, we are calling selinux_parse_skb() much earlier than we really should
resulting in potentially wasted cycles parsing packets for information we
might no use; so shuffle the code around a bit to fix this.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
2008-10-10 10:16:30 -04:00
Paul Moore
aa86290089 selinux: Correctly handle IPv4 packets on IPv6 sockets in all cases
We did the right thing in a few cases but there were several areas where we
determined a packet's address family based on the socket's address family which
is not the right thing to do since we can get IPv4 packets on IPv6 sockets.
This patch fixes these problems by either taking the address family directly
from the packet.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
2008-10-10 10:16:29 -04:00
Paul Moore
accc609322 selinux: Cleanup the NetLabel glue code
We were doing a lot of extra work in selinux_netlbl_sock_graft() what wasn't
necessary so this patch removes that code.  It also removes the redundant
second argument to selinux_netlbl_sock_setsid() which allows us to simplify a
few other functions.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
2008-10-10 10:16:29 -04:00
Paul Moore
3040a6d5a2 selinux: Fix an uninitialized variable BUG/panic in selinux_secattr_to_sid()
At some point during the 2.6.27 development cycle two new fields were added
to the SELinux context structure, a string pointer and a length field.  The
code in selinux_secattr_to_sid() was not modified and as a result these two
fields were left uninitialized which could result in erratic behavior,
including kernel panics, when NetLabel is used.  This patch fixes the
problem by fully initializing the context in selinux_secattr_to_sid() before
use and reducing the level of direct context manipulation done to help
prevent future problems.

Please apply this to the 2.6.27-rcX release stream.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-10-04 08:25:18 +10:00
Paul Moore
81990fbdd1 selinux: Fix an uninitialized variable BUG/panic in selinux_secattr_to_sid()
At some point during the 2.6.27 development cycle two new fields were added
to the SELinux context structure, a string pointer and a length field.  The
code in selinux_secattr_to_sid() was not modified and as a result these two
fields were left uninitialized which could result in erratic behavior,
including kernel panics, when NetLabel is used.  This patch fixes the
problem by fully initializing the context in selinux_secattr_to_sid() before
use and reducing the level of direct context manipulation done to help
prevent future problems.

Please apply this to the 2.6.27-rcX release stream.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-10-04 08:18:18 +10:00
Stephen Smalley
ea6b184f7d selinux: use default proc sid on symlinks
As we are not concerned with fine-grained control over reading of
symlinks in proc, always use the default proc SID for all proc symlinks.
This should help avoid permission issues upon changes to the proc tree
as in the /proc/net -> /proc/self/net example.
This does not alter labeling of symlinks within /proc/pid directories.
ls -Zd /proc/net output before and after the patch should show the difference.

Signed-off-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-09-30 00:26:53 +10:00
James Morris
ab2b49518e Merge branch 'master' into next
Conflicts:

	MAINTAINERS

Thanks for breaking my tree :-)

Signed-off-by: James Morris <jmorris@namei.org>
2008-09-21 17:41:56 -07:00
Frank Mayhar
f06febc96b timers: fix itimer/many thread hang
Overview

This patch reworks the handling of POSIX CPU timers, including the
ITIMER_PROF, ITIMER_VIRT timers and rlimit handling.  It was put together
with the help of Roland McGrath, the owner and original writer of this code.

The problem we ran into, and the reason for this rework, has to do with using
a profiling timer in a process with a large number of threads.  It appears
that the performance of the old implementation of run_posix_cpu_timers() was
at least O(n*3) (where "n" is the number of threads in a process) or worse.
Everything is fine with an increasing number of threads until the time taken
for that routine to run becomes the same as or greater than the tick time, at
which point things degrade rather quickly.

This patch fixes bug 9906, "Weird hang with NPTL and SIGPROF."

Code Changes

This rework corrects the implementation of run_posix_cpu_timers() to make it
run in constant time for a particular machine.  (Performance may vary between
one machine and another depending upon whether the kernel is built as single-
or multiprocessor and, in the latter case, depending upon the number of
running processors.)  To do this, at each tick we now update fields in
signal_struct as well as task_struct.  The run_posix_cpu_timers() function
uses those fields to make its decisions.

We define a new structure, "task_cputime," to contain user, system and
scheduler times and use these in appropriate places:

struct task_cputime {
	cputime_t utime;
	cputime_t stime;
	unsigned long long sum_exec_runtime;
};

This is included in the structure "thread_group_cputime," which is a new
substructure of signal_struct and which varies for uniprocessor versus
multiprocessor kernels.  For uniprocessor kernels, it uses "task_cputime" as
a simple substructure, while for multiprocessor kernels it is a pointer:

struct thread_group_cputime {
	struct task_cputime totals;
};

struct thread_group_cputime {
	struct task_cputime *totals;
};

We also add a new task_cputime substructure directly to signal_struct, to
cache the earliest expiration of process-wide timers, and task_cputime also
replaces the it_*_expires fields of task_struct (used for earliest expiration
of thread timers).  The "thread_group_cputime" structure contains process-wide
timers that are updated via account_user_time() and friends.  In the non-SMP
case the structure is a simple aggregator; unfortunately in the SMP case that
simplicity was not achievable due to cache-line contention between CPUs (in
one measured case performance was actually _worse_ on a 16-cpu system than
the same test on a 4-cpu system, due to this contention).  For SMP, the
thread_group_cputime counters are maintained as a per-cpu structure allocated
using alloc_percpu().  The timer functions update only the timer field in
the structure corresponding to the running CPU, obtained using per_cpu_ptr().

We define a set of inline functions in sched.h that we use to maintain the
thread_group_cputime structure and hide the differences between UP and SMP
implementations from the rest of the kernel.  The thread_group_cputime_init()
function initializes the thread_group_cputime structure for the given task.
The thread_group_cputime_alloc() is a no-op for UP; for SMP it calls the
out-of-line function thread_group_cputime_alloc_smp() to allocate and fill
in the per-cpu structures and fields.  The thread_group_cputime_free()
function, also a no-op for UP, in SMP frees the per-cpu structures.  The
thread_group_cputime_clone_thread() function (also a UP no-op) for SMP calls
thread_group_cputime_alloc() if the per-cpu structures haven't yet been
allocated.  The thread_group_cputime() function fills the task_cputime
structure it is passed with the contents of the thread_group_cputime fields;
in UP it's that simple but in SMP it must also safely check that tsk->signal
is non-NULL (if it is it just uses the appropriate fields of task_struct) and,
if so, sums the per-cpu values for each online CPU.  Finally, the three
functions account_group_user_time(), account_group_system_time() and
account_group_exec_runtime() are used by timer functions to update the
respective fields of the thread_group_cputime structure.

Non-SMP operation is trivial and will not be mentioned further.

The per-cpu structure is always allocated when a task creates its first new
thread, via a call to thread_group_cputime_clone_thread() from copy_signal().
It is freed at process exit via a call to thread_group_cputime_free() from
cleanup_signal().

All functions that formerly summed utime/stime/sum_sched_runtime values from
from all threads in the thread group now use thread_group_cputime() to
snapshot the values in the thread_group_cputime structure or the values in
the task structure itself if the per-cpu structure hasn't been allocated.

Finally, the code in kernel/posix-cpu-timers.c has changed quite a bit.
The run_posix_cpu_timers() function has been split into a fast path and a
slow path; the former safely checks whether there are any expired thread
timers and, if not, just returns, while the slow path does the heavy lifting.
With the dedicated thread group fields, timers are no longer "rebalanced" and
the process_timer_rebalance() function and related code has gone away.  All
summing loops are gone and all code that used them now uses the
thread_group_cputime() inline.  When process-wide timers are set, the new
task_cputime structure in signal_struct is used to cache the earliest
expiration; this is checked in the fast path.

Performance

The fix appears not to add significant overhead to existing operations.  It
generally performs the same as the current code except in two cases, one in
which it performs slightly worse (Case 5 below) and one in which it performs
very significantly better (Case 2 below).  Overall it's a wash except in those
two cases.

I've since done somewhat more involved testing on a dual-core Opteron system.

Case 1: With no itimer running, for a test with 100,000 threads, the fixed
	kernel took 1428.5 seconds, 513 seconds more than the unfixed system,
	all of which was spent in the system.  There were twice as many
	voluntary context switches with the fix as without it.

Case 2: With an itimer running at .01 second ticks and 4000 threads (the most
	an unmodified kernel can handle), the fixed kernel ran the test in
	eight percent of the time (5.8 seconds as opposed to 70 seconds) and
	had better tick accuracy (.012 seconds per tick as opposed to .023
	seconds per tick).

Case 3: A 4000-thread test with an initial timer tick of .01 second and an
	interval of 10,000 seconds (i.e. a timer that ticks only once) had
	very nearly the same performance in both cases:  6.3 seconds elapsed
	for the fixed kernel versus 5.5 seconds for the unfixed kernel.

With fewer threads (eight in these tests), the Case 1 test ran in essentially
the same time on both the modified and unmodified kernels (5.2 seconds versus
5.8 seconds).  The Case 2 test ran in about the same time as well, 5.9 seconds
versus 5.4 seconds but again with much better tick accuracy, .013 seconds per
tick versus .025 seconds per tick for the unmodified kernel.

Since the fix affected the rlimit code, I also tested soft and hard CPU limits.

Case 4: With a hard CPU limit of 20 seconds and eight threads (and an itimer
	running), the modified kernel was very slightly favored in that while
	it killed the process in 19.997 seconds of CPU time (5.002 seconds of
	wall time), only .003 seconds of that was system time, the rest was
	user time.  The unmodified kernel killed the process in 20.001 seconds
	of CPU (5.014 seconds of wall time) of which .016 seconds was system
	time.  Really, though, the results were too close to call.  The results
	were essentially the same with no itimer running.

Case 5: With a soft limit of 20 seconds and a hard limit of 2000 seconds
	(where the hard limit would never be reached) and an itimer running,
	the modified kernel exhibited worse tick accuracy than the unmodified
	kernel: .050 seconds/tick versus .028 seconds/tick.  Otherwise,
	performance was almost indistinguishable.  With no itimer running this
	test exhibited virtually identical behavior and times in both cases.

In times past I did some limited performance testing.  those results are below.

On a four-cpu Opteron system without this fix, a sixteen-thread test executed
in 3569.991 seconds, of which user was 3568.435s and system was 1.556s.  On
the same system with the fix, user and elapsed time were about the same, but
system time dropped to 0.007 seconds.  Performance with eight, four and one
thread were comparable.  Interestingly, the timer ticks with the fix seemed
more accurate:  The sixteen-thread test with the fix received 149543 ticks
for 0.024 seconds per tick, while the same test without the fix received 58720
for 0.061 seconds per tick.  Both cases were configured for an interval of
0.01 seconds.  Again, the other tests were comparable.  Each thread in this
test computed the primes up to 25,000,000.

I also did a test with a large number of threads, 100,000 threads, which is
impossible without the fix.  In this case each thread computed the primes only
up to 10,000 (to make the runtime manageable).  System time dominated, at
1546.968 seconds out of a total 2176.906 seconds (giving a user time of
629.938s).  It received 147651 ticks for 0.015 seconds per tick, still quite
accurate.  There is obviously no comparable test without the fix.

Signed-off-by: Frank Mayhar <fmayhar@google.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-14 16:25:35 +02:00
Stephen Smalley
f058925b20 Update selinux info in MAINTAINERS and Kconfig help text
Update the SELinux entry in MAINTAINERS and drop the obsolete information
from the selinux Kconfig help text.

Signed-off-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-09-12 00:44:08 +10:00
Eric Paris
8e531af90f SELinux: memory leak in security_context_to_sid_core
Fix a bug and a philosophical decision about who handles errors.

security_context_to_sid_core() was leaking a context in the common case.
This was causing problems on fedora systems which recently have started
making extensive use of this function.

In discussion it was decided that if string_to_context_struct() had an
error it was its own responsibility to clean up any mess it created
along the way.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-09-04 08:35:13 +10:00
KaiGai Kohei
d9250dea3f SELinux: add boundary support and thread context assignment
The purpose of this patch is to assign per-thread security context
under a constraint. It enables multi-threaded server application
to kick a request handler with its fair security context, and
helps some of userspace object managers to handle user's request.

When we assign a per-thread security context, it must not have wider
permissions than the original one. Because a multi-threaded process
shares a single local memory, an arbitary per-thread security context
also means another thread can easily refer violated information.

The constraint on a per-thread security context requires a new domain
has to be equal or weaker than its original one, when it tries to assign
a per-thread security context.

Bounds relationship between two types is a way to ensure a domain can
never have wider permission than its bounds. We can define it in two
explicit or implicit ways.

The first way is using new TYPEBOUNDS statement. It enables to define
a boundary of types explicitly. The other one expand the concept of
existing named based hierarchy. If we defines a type with "." separated
name like "httpd_t.php", toolchain implicitly set its bounds on "httpd_t".

This feature requires a new policy version.
The 24th version (POLICYDB_VERSION_BOUNDARY) enables to ship them into
kernel space, and the following patch enables to handle it.

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-08-29 00:33:33 +10:00
James Morris
86d688984d Merge branch 'master' into next 2008-08-28 10:47:34 +10:00
Vesa-Matti Kari
dbc74c65b3 selinux: Unify for- and while-loop style
Replace "thing != NULL" comparisons with just "thing" to make
the code look more uniform (mixed styles were used even in the
same source file).

Signed-off-by: Vesa-Matti Kari <vmkari@cc.helsinki.fi>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-08-15 08:40:47 +10:00
David Howells
5cd9c58fbe security: Fix setting of PF_SUPERPRIV by __capable()
Fix the setting of PF_SUPERPRIV by __capable() as it could corrupt the flags
the target process if that is not the current process and it is trying to
change its own flags in a different way at the same time.

__capable() is using neither atomic ops nor locking to protect t->flags.  This
patch removes __capable() and introduces has_capability() that doesn't set
PF_SUPERPRIV on the process being queried.

This patch further splits security_ptrace() in two:

 (1) security_ptrace_may_access().  This passes judgement on whether one
     process may access another only (PTRACE_MODE_ATTACH for ptrace() and
     PTRACE_MODE_READ for /proc), and takes a pointer to the child process.
     current is the parent.

 (2) security_ptrace_traceme().  This passes judgement on PTRACE_TRACEME only,
     and takes only a pointer to the parent process.  current is the child.

     In Smack and commoncap, this uses has_capability() to determine whether
     the parent will be permitted to use PTRACE_ATTACH if normal checks fail.
     This does not set PF_SUPERPRIV.

Two of the instances of __capable() actually only act on current, and so have
been changed to calls to capable().

Of the places that were using __capable():

 (1) The OOM killer calls __capable() thrice when weighing the killability of a
     process.  All of these now use has_capability().

 (2) cap_ptrace() and smack_ptrace() were using __capable() to check to see
     whether the parent was allowed to trace any process.  As mentioned above,
     these have been split.  For PTRACE_ATTACH and /proc, capable() is now
     used, and for PTRACE_TRACEME, has_capability() is used.

 (3) cap_safe_nice() only ever saw current, so now uses capable().

 (4) smack_setprocattr() rejected accesses to tasks other than current just
     after calling __capable(), so the order of these two tests have been
     switched and capable() is used instead.

 (5) In smack_file_send_sigiotask(), we need to allow privileged processes to
     receive SIGIO on files they're manipulating.

 (6) In smack_task_wait(), we let a process wait for a privileged process,
     whether or not the process doing the waiting is privileged.

I've tested this with the LTP SELinux and syscalls testscripts.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Andrew G. Morgan <morgan@kernel.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Morris <jmorris@namei.org>
2008-08-14 22:59:43 +10:00
Vesa-Matti Kari
421fae06be selinux: conditional expression type validation was off-by-one
expr_isvalid() in conditional.c was off-by-one and allowed
invalid expression type COND_LAST. However, it is this header file
that needs to be fixed. That way the if-statement's disjunction's
second component reads more naturally, "if expr type is greater than
the last allowed value" ( rather than using ">=" in conditional.c):

  if (expr->expr_type <= 0 || expr->expr_type > COND_LAST)

Signed-off-by: Vesa-Matti Kari <vmkari@cc.helsinki.fi>
Signed-off-by: James Morris <jmorris@namei.org>
2008-08-07 08:56:16 +10:00
David Howells
cf9481e289 SELinux: Fix a potentially uninitialised variable in SELinux hooks
Fix a potentially uninitialised variable in SELinux hooks that's given a
pointer to the network address by selinux_parse_skb() passing a pointer back
through its argument list.  By restructuring selinux_parse_skb(), the compiler
can see that the error case need not set it as the caller will return
immediately.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-08-05 10:55:47 +10:00
Vesa-Matti J Kari
0c0e186f81 SELinux: trivial, remove unneeded local variable
Hello,

Remove unneeded local variable:

    struct avtab_node *newnode

Signed-off-by: Vesa-Matti Kari <vmkari@cc.helsinki.fi>
Signed-off-by: James Morris <jmorris@namei.org>
2008-08-05 10:55:38 +10:00
Vesa-Matti J Kari
df4ea865f0 SELinux: Trivial minor fixes that change C null character style
Trivial minor fixes that change C null character style.

Signed-off-by: Vesa-Matti Kari <vmkari@cc.helsinki.fi>
Signed-off-by: James Morris <jmorris@namei.org>
2008-08-05 10:55:30 +10:00
Adrian Bunk
3583a71183 make selinux_write_opts() static
This patch makes the needlessly global selinux_write_opts() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
2008-08-05 10:55:24 +10:00
Eric Paris
383795c206 SELinux: /proc/mounts should show what it can
Given a hosed SELinux config in which a system never loads policy or
disables SELinux we currently just return -EINVAL for anyone trying to
read /proc/mounts.  This is a configuration problem but we can certainly
be more graceful.  This patch just ignores -EINVAL when displaying LSM
options and causes /proc/mounts display everything else it can.  If
policy isn't loaded the obviously there are no options, so we aren't
really loosing any information here.

This is safe as the only other return of EINVAL comes from
security_sid_to_context_core() in the case of an invalid sid.  Even if a
FS was mounted with a now invalidated context that sid should have been
remapped to unlabeled and so we won't hit the EINVAL and will work like
we should.  (yes, I tested to make sure it worked like I thought)

Signed-off-by: Eric Paris <eparis@redhat.com>
Tested-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-07-30 08:31:28 +10:00
Linus Torvalds
4836e30078 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (39 commits)
  [PATCH] fix RLIM_NOFILE handling
  [PATCH] get rid of corner case in dup3() entirely
  [PATCH] remove remaining namei_{32,64}.h crap
  [PATCH] get rid of indirect users of namei.h
  [PATCH] get rid of __user_path_lookup_open
  [PATCH] f_count may wrap around
  [PATCH] dup3 fix
  [PATCH] don't pass nameidata to __ncp_lookup_validate()
  [PATCH] don't pass nameidata to gfs2_lookupi()
  [PATCH] new (local) helper: user_path_parent()
  [PATCH] sanitize __user_walk_fd() et.al.
  [PATCH] preparation to __user_walk_fd cleanup
  [PATCH] kill nameidata passing to permission(), rename to inode_permission()
  [PATCH] take noexec checks to very few callers that care
  Re: [PATCH 3/6] vfs: open_exec cleanup
  [patch 4/4] vfs: immutable inode checking cleanup
  [patch 3/4] fat: dont call notify_change
  [patch 2/4] vfs: utimes cleanup
  [patch 1/4] vfs: utimes: move owner check into inode_change_ok()
  [PATCH] vfs: use kstrdup() and check failing allocation
  ...
2008-07-26 20:23:44 -07:00
Linus Torvalds
2284284281 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  netns: fix ip_rt_frag_needed rt_is_expired
  netfilter: nf_conntrack_extend: avoid unnecessary "ct->ext" dereferences
  netfilter: fix double-free and use-after free
  netfilter: arptables in netns for real
  netfilter: ip{,6}tables_security: fix future section mismatch
  selinux: use nf_register_hooks()
  netfilter: ebtables: use nf_register_hooks()
  Revert "pkt_sched: sch_sfq: dump a real number of flows"
  qeth: use dev->ml_priv instead of dev->priv
  syncookies: Make sure ECN is disabled
  net: drop unused BUG_TRAP()
  net: convert BUG_TRAP to generic WARN_ON
  drivers/net: convert BUG_TRAP to generic WARN_ON
2008-07-26 20:17:56 -07:00
Al Viro
b77b0646ef [PATCH] pass MAY_OPEN to vfs_permission() explicitly
... and get rid of the last "let's deduce mask from nameidata->flags"
bit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26 20:53:22 -04:00
Alexey Dobriyan
6c5a9d2e15 selinux: use nf_register_hooks()
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-26 17:48:15 -07:00
Roland McGrath
0d094efeb1 tracehook: tracehook_tracer_task
This adds the tracehook_tracer_task() hook to consolidate all forms of
"Who is using ptrace on me?" logic.  This is used for "TracerPid:" in
/proc and for permission checks.  We also clean up the selinux code the
called an identical accessor.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:08 -07:00
James Morris
089be43e40 Revert "SELinux: allow fstype unknown to policy to use xattrs if present"
This reverts commit 811f379927.

From Eric Paris:

"Please drop this patch for now.  It deadlocks on ntfs-3g.  I need to
rework it to handle fuse filesystems better.  (casey was right)"
2008-07-15 18:32:49 +10:00
James Morris
6f0f0fd496 security: remove register_security hook
The register security hook is no longer required, as the capability
module is always registered.  LSMs wishing to stack capability as
a secondary module should do so explicitly.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-14 15:04:06 +10:00
Miklos Szeredi
b478a9f988 security: remove unused sb_get_mnt_opts hook
The sb_get_mnt_opts() hook is unused, and is superseded by the
sb_show_options() hook.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: James Morris <jmorris@namei.org>
2008-07-14 15:02:05 +10:00
Eric Paris
2069f45784 LSM/SELinux: show LSM mount options in /proc/mounts
This patch causes SELinux mount options to show up in /proc/mounts.  As
with other code in the area seq_put errors are ignored.  Other LSM's
will not have their mount options displayed until they fill in their own
security_sb_show_options() function.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: James Morris <jmorris@namei.org>
2008-07-14 15:02:05 +10:00
Eric Paris
811f379927 SELinux: allow fstype unknown to policy to use xattrs if present
Currently if a FS is mounted for which SELinux policy does not define an
fs_use_* that FS will either be genfs labeled or not labeled at all.
This decision is based on the existence of a genfscon rule in policy and
is irrespective of the capabilities of the filesystem itself.  This
patch allows the kernel to check if the filesystem supports security
xattrs and if so will use those if there is no fs_use_* rule in policy.
An fstype with a no fs_use_* rule but with a genfs rule will use xattrs
if available and will follow the genfs rule.

This can be particularly interesting for things like ecryptfs which
actually overlays a real underlying FS.  If we define excryptfs in
policy to use xattrs we will likely get this wrong at times, so with
this path we just don't need to define it!

Overlay ecryptfs on top of NFS with no xattr support:
SELinux: initialized (dev ecryptfs, type ecryptfs), uses genfs_contexts
Overlay ecryptfs on top of ext4 with xattr support:
SELinux: initialized (dev ecryptfs, type ecryptfs), uses xattr

It is also useful as the kernel adds new FS we don't need to add them in
policy if they support xattrs and that is how we want to handle them.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-07-14 15:02:04 +10:00
James Morris
2baf06df85 SELinux: use do_each_thread as a proper do/while block
Use do_each_thread as a proper do/while block.  Sparse complained.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
2008-07-14 15:02:02 +10:00
James Morris
e399f98224 SELinux: remove unused and shadowed addrlen variable
Remove unused and shadowed addrlen variable.  Picked up by sparse.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Paul Moore <paul.moore@hp.com>
2008-07-14 15:02:01 +10:00
Eric Paris
6cbe27061a SELinux: more user friendly unknown handling printk
I've gotten complaints and reports about people not understanding the
meaning of the current unknown class/perm handling the kernel emits on
every policy load.  Hopefully this will make make it clear to everyone
the meaning of the message and won't waste a printk the user won't care
about anyway on systems where the kernel and the policy agree on
everything.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-07-14 15:02:00 +10:00
Stephen Smalley
22df4adb04 selinux: change handling of invalid classes (Was: Re: 2.6.26-rc5-mm1 selinux whine)
On Mon, 2008-06-09 at 01:24 -0700, Andrew Morton wrote:
> Getting a few of these with FC5:
>
> SELinux: context_struct_compute_av:  unrecognized class 69
> SELinux: context_struct_compute_av:  unrecognized class 69
>
> one came out when I logged in.
>
> No other symptoms, yet.

Change handling of invalid classes by SELinux, reporting class values
unknown to the kernel as errors (w/ ratelimit applied) and handling
class values unknown to policy as normal denials.

Signed-off-by:  Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-07-14 15:01:59 +10:00
Eric Paris
89abd0acf0 SELinux: drop load_mutex in security_load_policy
We used to protect against races of policy load in security_load_policy
by using the load_mutex.  Since then we have added a new mutex,
sel_mutex, in sel_write_load() which is always held across all calls to
security_load_policy we are covered and can safely just drop this one.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-07-14 15:01:58 +10:00
Eric Paris
cea78dc4ca SELinux: fix off by 1 reference of class_to_string in context_struct_compute_av
The class_to_string array is referenced by tclass.  My code mistakenly
was using tclass - 1.  If the proceeding class is a userspace class
rather than kernel class this may cause a denial/EINVAL even if unknown
handling is set to allow.  The bug shouldn't be allowing excess
privileges since those are given based on the contents of another array
which should be correctly referenced.

At this point in time its pretty unlikely this is going to cause
problems.  The most recently added kernel classes which could be
affected are association, dccp_socket, and peer.  Its pretty unlikely
any policy with handle_unknown=allow doesn't have association and
dccp_socket undefined (they've been around longer than unknown handling)
and peer is conditionalized on a policy cap which should only be defined
if that class exists in policy.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2008-07-14 15:01:58 +10:00
James Morris
bdd581c143 SELinux: open code sidtab lock
Open code sidtab lock to make Andrew Morton happy.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
2008-07-14 15:01:57 +10:00