Commit Graph

18 Commits

Author SHA1 Message Date
Andrew Morton
dd68e88c72 [SERIAL] 8520_pci: build fix
_INLINE_ went away.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 10:55:26 +00:00
Gareth Howlett
26e92861be [SERIAL] Add support for more Connect Tech PCI serial boards
I've also fixed the sort-ordering comments on this naming convention.

Signed-off-by: Stuart MacDonald <stuartm@connecttech.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:00:42 +00:00
Dave Jones
c2cd6d3c12 [SERIAL] 8250_pci: Remove redundant assignment, and mark fallthrough.
Signed-off-by: Dave Jones <davej@redhat.com>
2005-12-07 18:11:26 +00:00
Arjan van de Ven
cb3592be27 [SERIAL] mark several serial tables const
This patch marks a few serial data structures const, moving them to
.rodata where they won't false-share cachelines with things that get
written to.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-28 21:04:11 +00:00
Justin Chen
551f8f0e87 [SERIAL] new hp diva console port
Add the new ID 0x132a and configure the new PCI Diva console port.  This
device supports only 1 single console UART.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-24 22:16:38 +01:00
Bjorn Helgaas
add7b58e75 [SERIAL] support the Exsys EX-4055 4S four-port card
Tested by Wolfgang Denk with this device:

    00:0f.0 Network controller: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 01)
        Subsystem: Exsys EX-4055 4S(16C550) RS-232
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at 80100000 (32-bit, non-prefetchable) [size=128]
        Region 1: I/O ports at 7080 [size=128]
        Region 2: I/O ports at 7400 [size=32]

    00:0f.0 Class 0280: 10b5:9050 (rev 01)
        Subsystem: d84d:4055

Results with this patch:

    Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    PCI: Found IRQ 10 for device 0000:00:0f.0
    ttyS4 at I/O 0x7400 (irq = 10) is a 16550A
    ttyS5 at I/O 0x7408 (irq = 10) is a 16550A
    ttyS6 at I/O 0x7410 (irq = 10) is a 16550A
    ttyS7 at I/O 0x7418 (irq = 10) is a 16550A

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-24 22:11:57 +01:00
Russell King
661299d9d0 Merge with Linus' 2.6 tree 2005-07-28 09:30:20 +01:00
David Ranson
db1de1595d [PATCH] serial: MRi MRI-PCIDS1 dual port serial card
Add support for the MRi PCIDS1 dual port serial card.  This card is a
little controversial since it is the subject of a PCI vendor/device ID
clash.  (See
http://www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).  I have
for now just used the hex ID 0x950a.  The divisor was part calculated part
iterated, so may not be exactly correct (but works for me at all settings
between 300 - 115300 bps).

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:53 -07:00
Russell King
05caac585f [SERIAL] Convert parport_serial to use new 8250_pci interfaces
Convert parport_serial to use the new 8250_pci interface, converting
the table to a pciserial_board table.  This also unuses the SPCI_*
definitions in serialP.h, which can now be removed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-27 11:41:18 +01:00
Russell King
241fc4367b [SERIAL] Expose 8250_pci setup/removal/suspend/resume functions
Re-jig the setup/removal/suspend/resume of 8250 pci ports so that they
know slightly less about how they're attached to a PCI device.  Expose
this as the new interface for registering PCI serial ports, as well as
the pciserial_board structure and associated flag definitions.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-27 11:35:54 +01:00
Russell King
70db3d91a5 [SERIAL] Pass around serial_private instead of pci_dev
Pass the serial_private structure via the setup method instead of
the pci_dev.  We don't want to assume that the pci_dev's driver
data is a pointer to serial_private.  Instead, put the pci_dev
inside serial_private.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-27 11:34:27 +01:00
Russell King
67d74b8707 [SERIAL] Collapse the SIIG quirk entries
Collapse all the SIIG quirk entries into one.  SIIG10x cards all
have PCI device IDs of 0x10xx, SIIG20x cards all have PCI device
IDs of 0x20xx.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-27 11:33:03 +01:00
Russell King
72ce9a8333 [SERIAL] Factor out the common setup from the per-serial port loop.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-27 11:32:04 +01:00
Russell King
1c7c1fe516 [SERIAL] Rename pci_board to pciserial_board.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-27 11:31:19 +01:00
Russell King
056a8763fc [PATCH] Serial: No need to check for priv != NULL in remove_one
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-22 10:15:04 +01:00
Andrey Panin
fbc0dc0df5 [PATCH] Serial: Add support for SIIG Quartet serial card
Add support for SIIG Quartet Serial card.  This card has Oxford
Semiconducor 16954 quad UART which is clocked by 10x faster
(18.432 MHz) quartz.

Signed-off-by: Andrey Panin <pazke@donpac.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-18 11:38:09 +01:00
Russell King
f1690f37a5 [PATCH] 8250_pci.c: add comment about enum sorting order
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-06 10:19:09 +01:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00