Commit Graph

210 Commits

Author SHA1 Message Date
Linus Torvalds
0cd43f83d3 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (48 commits)
  ieee1394: raw1394: arm functions slept in atomic context
  ieee1394: sbp2: enable auto spin-up for all SBP-2 devices
  MAINTAINERS: updates to IEEE 1394 subsystem maintainership
  ieee1394: ohci1394: check for errors in suspend or resume
  set power state of firewire host during suspend
  ieee1394: ohci1394: more obvious endianess handling
  ieee1394: ohci1394: fix endianess bug in debug message
  ieee1394: sbp2: don't prefer MODE SENSE 10
  ieee1394: nodemgr: grab class.subsys.rwsem in nodemgr_resume_ne
  ieee1394: nodemgr: fix rwsem recursion
  ieee1394: sbp2: more help in Kconfig
  ieee1394: sbp2: prevent rare deadlock in shutdown
  ieee1394: sbp2: update includes
  ieee1394: sbp2: better handling of transport errors
  ieee1394: sbp2: recheck node generation in sbp2_update
  ieee1394: sbp2: safer agent reset in error handlers
  ieee1394: sbp2: handle "sbp2util_node_write_no_wait failed"
  CONFIG_PM=n slim: drivers/ieee1394/ohci1394.c
  ieee1394: safer definition of empty macros
  video1394: add poll file operation support
  ...
2006-09-30 09:38:19 -07:00
Jean Delvare
a0d9c63d36 i2c-algo-bit: Discard the mdelay data struct member
i2c-algo-bit: Discard the mdelay data struct member

The i2c_algo_bit_data structure has an mdelay member, which is not
used by the algorithm code (the code has always been ifdef'd out.)
Let's discard it to save some code and memory.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26 15:38:51 -07:00
Stefan Richter
3253b669ee ieee1394: raw1394: arm functions slept in atomic context
Sleeping functions like copy_to_user were accessed inside spinlocks in
raw1394's arm_register, arm_unregister, arm_get_buf, arm_set_buf.
http://bugzilla.kernel.org/show_bug.cgi?id=7120

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: David Trent <DTrent@piacton.com>
(cherry picked from e575953ec17c3f5c1e738847d2d16c241bb99783 commit)
2006-09-23 15:13:55 +02:00
Stefan Richter
c394f1eafe ieee1394: sbp2: enable auto spin-up for all SBP-2 devices
This is a follow-up to patch "ieee1394: sbp2: enable auto spin-up for
Maxtor disks".  When I 'ejected' an OXUF922 based HDD from a Mac OS X
box, it was spun down by the Mac and did not spin up by itself when
attached to a Linux box right after that.  The first SCSI command that
required the bridge to access the drive ended in
sda:<6>sd 18:0:0:0: Device not ready: <6>: Current: sense key: Not Ready
    Additional sense: Logical unit not ready, initializing cmd. required

Therefore the flag which instructs scsi_mod to send START STOP UNIT with
START=1 ("make medium ready") after such a condition is now enabled
unconditionally for all FireWire storage devices.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:53:01 +02:00
Stefan Richter
ea6104c224 ieee1394: ohci1394: check for errors in suspend or resume
Some of the suspend and resume litany may fail.
Tell the PCI core about it.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:41:45 +02:00
Pavel Machek
f0645e7720 set power state of firewire host during suspend
Put firewire host controller in PCI Dx state for system suspend.
(I was not able to measure any power savings, but it sounds like right
thing to do, anyway.)

Signed-off-by: Pavel Machek <pavel@suse.cz>

Update by stefanr:  Shuffle with existing PPC_PMAC code.  Set power
state in the resume hook too.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:39:06 +02:00
Stefan Richter
9531f13ae5 ieee1394: ohci1394: more obvious endianess handling
Rename ohci1394's packet_swab to header_le32_to_cpu to better reflect
what it actually does.  Also, define a constant array as 'const' and
check the array index properly.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:39:01 +02:00
Stefan Richter
cf82703dc6 ieee1394: ohci1394: fix endianess bug in debug message
The transaction labels were misprinted int the debug printk "Packet
received from node..." due two byte-swapping once too often.  Affected
were big endian machines, except UniNorth based ones.  Fix tested by
Wolfgang Pfeiffer.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:38:57 +02:00
Stefan Richter
98e238cd42 ieee1394: sbp2: don't prefer MODE SENSE 10
In the old days, sbp2 used to coerce all MODE SENSE commands into the
10 bytes version.  When all command set conversions were removed from
sbp2 several months ago, sdev->use_10_for_ms = 1 was added.  Meaning,
higher SCSI layers preferred the 10 bytes version but would try the 6
bytes version if the former failed.

Recently, a problem with the 10 bytes version was discovered.  An Initio
INIC-1530 firmware accepted the 10 bytes version but replied with bogus
data, showing the HDD incorrectly as write-protected.  Since RBC
actually mandates MODE SENSE (6), I checked which version was sent by
Windows XP and Mac OS X 10.3 to an SBP-2 target hosted by Linux --- it
was the 6 bytes version.  (Exception: OS X sent the 10 bytes version to
an MMC target.  RBC and SBC got MODE SENSE (6).)

Therefore, drop the use_10_for_ms flag from sbp2.  Now the upper layers
will try MODE SENSE (6) before MODE SENSE (10) on all SBP-2 devices.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:38:52 +02:00
Stefan Richter
a1842be898 ieee1394: nodemgr: grab class.subsys.rwsem in nodemgr_resume_ne
nodemgr_resume_ne was iterating over nodemgr_ud_class.children without
protection by nodemgr_ud_class.subsys.rwsem.

FIXME:
Shouldn't we rather use class->sem there, not class->subsys.rwsem?

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:38:43 +02:00
Stefan Richter
9b51601086 ieee1394: nodemgr: fix rwsem recursion
nodemgr_update_pdrv grabbed an rw semaphore (as reader) which was
already taken by its caller's caller, nodemgr_probe_ne (as reader too).
Reported by Miles Lane, call path pointed out by Arjan van de Ven.

FIXME:
Shouldn't we rather use class->sem there, not class->subsys.rwsem?

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:38:14 +02:00
Stefan Richter
b809289df0 ieee1394: sbp2: more help in Kconfig
Add some pointers to SCSI to the configuration menu item of sbp2.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:34:50 +02:00
Stefan Richter
2cccbb555c ieee1394: sbp2: prevent rare deadlock in shutdown
Scsi_remove_device() may go into uninterruptible sleep if blocked.
Therefore sbp2_remove() unblocks the Scsi_Host before the device is
requested to be removed.  But there could be another 1394 bus reset
after that which would block the host again.  The 1394 subsystem won't
call sbp2_update() concurrently to sbp2_remove(), which is why there is
no chance for sbp2_remove() to be unblocked by sbp2_update().

The fix is to tell sbp2's bus reset handler when a device is to be shut
down so that it skips scsi_block_requests() on that host.  As before,
any new commands after a reset without reconnect will be failed quickly
by sbp2scsi_queuecommand().

In the long term, means to go without scsi_block_requests() should be
found.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:34:44 +02:00
Stefan Richter
902abed158 ieee1394: sbp2: update includes
Remove unused includes.  Add missing includes, i.e. explicitly include
all used headers.  Sort includes alphabetically.  Replace one call to
signal_pending(current) to avoid to include headers just for this line.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:34:41 +02:00
Stefan Richter
abbca103a0 ieee1394: sbp2: better handling of transport errors
If the target signals a transport failure via status block, complete the
request with DID_BUSY to indicate to the SCSI subsystem that the command
may succeed when retried.

Also log diagnostic information if the status block shows a transport
related problem.  It may point to hardware faults.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:34:37 +02:00
Stefan Richter
4fc383c09d ieee1394: sbp2: recheck node generation in sbp2_update
While sbp2_update() is doing its duties after a bus reset, another reset
could happen.  Don't accept new requests until the next undisturbed
sbp2_update() or until sbp2_remove().

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:34:33 +02:00
Stefan Richter
1f427e8055 ieee1394: sbp2: safer agent reset in error handlers
The scsi_host_template's eh_abort_handler and eh_device_reset_handler
are allowed to sleep.  Use this to run sbp2_agent_reset in the more
reliable mode which returns _after_ its write transaction was finished.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:34:30 +02:00
Stefan Richter
09ee67abe9 ieee1394: sbp2: handle "sbp2util_node_write_no_wait failed"
Fix for http://bugzilla.kernel.org/show_bug.cgi?id=6948

Because sbp2 writes to the target's fetch agent's registers from within
atomic context, it cannot sleep to guaranteedly get a free transaction
label.  This may repeatedly lead to "sbp2util_node_write_no_wait failed"
and consequently to SCSI command abortion after timeout.  A likely cause
is that many queue_command softirqs may occur before khpsbpkt (the
ieee1394 driver's thread which cleans up after finished transactions) is
woken up to recycle tlabels.

Sbp2 now schedules a workqueue job whenever sbp2_link_orb_command fails
in sbp2util_node_write_no_wait.  The job will reliably get a transaction
label because it can sleep.

We use the kernel-wide shared workqueue because it is unlikely that the
job itself actually needs to sleep.  In the improbable case that it has
to sleep, it doesn't need to sleep long since the standard transaction
timeout is 100ms.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:34:14 +02:00
Alexey Dobriyan
2a87418284 CONFIG_PM=n slim: drivers/ieee1394/ohci1394.c
Remove some code which is unneeded if CONFIG_PM=n.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:33:19 +02:00
Stefan Richter
611aa19fd6 ieee1394: safer definition of empty macros
A deactivated macro, defined as "#define foo(bar)", will result in
silent corruption if somebody forgets a semicolon after a call to foo.
Replace it by "#define foo(bar) do {} while (0)" which will reveal any
respective syntax errors.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:31:20 +02:00
David Moore
4b60912e52 video1394: add poll file operation support
This patch adds support for the poll file operation to the video1394
driver.

Signed-off-by: David Moore <dcm@acm.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:31:13 +02:00
Adrian Bunk
a1b3206b36 the scheduled removal of drivers/ieee1394/sbp2.c:force_inquiry_hack
This patch contains the scheduled removal of the force_inquiry_hack
module parameter.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:31:08 +02:00
Andi Kleen
8df4083c52 Initialize ieee1394 early when built in
This makes debugging with firescope easier.

Signed-off-by: Andi Kleen <ak@suse.de> (original patch)

Update:
 - no need for #ifdef MODULE
 - add comment in ieee1394_core, more verbose comment in ohci1394

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (update)
2006-09-17 19:29:34 +02:00
Stefan Richter
e8398bb737 ieee1394: sbp2: convert sbp2util_down_timeout to waitqueue
The waitqueue API is used to replace a custom wait mechanism.  Only one
global waitqueue (instead of per-device waitqueues or completions) is
added because there is usually just one waiter.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:29:31 +02:00
Stefan Richter
6065772d54 ieee1394: sbp2: more checks of status block
- Add checks for the (very unlikely) cases that the target writes too
   little or too much status data or writes unsolicited status.
 - Indicate that these and similar conditions are unlikely().
 - Check the 'resp' and 'sbp_status' fields for possible failure status.
 - Slightly optimize access macros for the status block bitfields.
 - Unify a few related log messages.

TODO:  Check if 'src'==1, then withhold the respective ORB from reuse
until status for any subsequent ORB was received.  This is an old bug
whose fix requires more complex command queue handling.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:29:24 +02:00
Stefan Richter
3e98eab46d ieee1394: sbp2: safer initialization of status fifo
Sbp2's copy of the status fifo was cleared when management ORBs or new
command ORBs were prepared.  The latter had potential for a race
condition if the block layer's soft IRQ and the 1394 LLD's interrupt
handler ran on different CPUs.  It would also yield wrong status if a
command was completed with non-zero completion status before other
commands that had zero completion status, and no new command was
enqueued in the meantime.

Now, the status buffer is cleared right before it is written.  Thus it
ends up in the following simpler and safer access pattern:
 - sbp2_alloc_device: allocates and implicitly clears once,
 - sbp2_handle_status_write: clears, writes, and reads,
 - sbp2_query_logins, sbp2_login_device, sbp2_reconnect_device: read.
The latter three do not race with sbp2_handle_status_write because of
how the protocol works.

As a tiny optimization, the first two quadlets of the status never need
to be cleared.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:29:22 +02:00
Stefan Richter
d4018d7fa6 ieee1394: sbp2: optimize DMA direction of command ORBs
Only the driver writes ORBs, the device just reads them.  Therefore
PCI_DMA_BIDIRECTIONAL can be replaced by PCI_DMA_TODEVICE which may be
cheaper on some architectures.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:29:11 +02:00
Stefan Richter
28212767e5 ieee1394: sbp2: discard return value of sbp2_link_orb_command
Since sbp2 is at the moment unable to do anything with the return value
of sbp2_link_orb_command, just discard it.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:29:01 +02:00
Stefan Richter
cc07818912 ieee1394: sbp2: safer last_orb and next_ORB handling
The sbp2 initiator has two ways to tell a target's fetch agent about new
command ORBs:
 - Write the ORB's address to the ORB_POINTER register.  This must not
   be done while the fetch agent is active.
 - Put the ORB's address into the previously submitted ORB's next_ORB
   field and write to the DOORBELL register.  This may be done while the
   fetch agent is active or suspended.  It must not be done while the
   fetch agent is in reset state.
Sbp2 has a last_orb pointer which indicates in what way a new command
should be announced.  That pointer is concurrently accessed at various
occasions.  Furthermore, initiator and target are accessing the next_ORB
field of ORBs concurrently and asynchronously.

This patch does:
 - Protect all initiator accesses to last_orb by sbp2_command_orb_lock.
 - Add pci_dma_sync_single_for_device before a previously submitted
   ORB's next_ORB field is overwritten.
 - Insert a memory barrier between when next_ORB_lo and next_ORB_hi are
   overwritten.  Next_ORB_hi must not be updated before next_ORB_lo.
 - Remove the rather unspecific and now superfluous qualifier "volatile"
   from the next_ORB fields.
 - Add comments on how last_orb is connected with what is known about
   the target's fetch agent's state.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:19:25 +02:00
Stefan Richter
9154df538f ieee1394: remove #include <asm/semaphore.h>
These includes in ieee1394_core and eth1394 are obsolete.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:18:50 +02:00
Stefan Richter
9951903e61 ieee1394: shrink tlabel pools, remove tpool semaphores
This patch reduces the size of struct hpsb_host and also removes
semaphores from ieee1394_transactions.c.  On i386, struct hpsb_host
shrinks from 10656 bytes to 6688 bytes.  This is accomplished by
 - using a single wait_queue for hpsb_get_tlabel instead of many
   instances of semaphores,
 - using a single lock to serialize access to all tlabel pools (the
   protected code regions are small, i.e. lock contention very low),
 - omitting the sysfs attribute tlabels_allocations.

Drawback:  In the rare case that a process needs to sleep because all
transaction labels for the node are temporarily exhausted, it is also
woken up if a tlabel for a different node became free, checks for an
available tlabel, and is put to sleep again.  The check is not costly
and the situation occurs extremely rarely.  (Tlabels are typically
only exhausted if there was no context switch to the khpsbpkt thread
which recycles tlables.)  Therefore the benefit of reduced tpool size
outweighs this drawback.

The sysfs attributes tlabels_free and tlabels_mask are not compiled
anymore unless CONFIG_IEEE1394_VERBOSEDEBUG is set.

The by far biggest member of struct hpsb_host, the struct csr_control
csr (5272 bytes on i386), is now placed at the end of struct hpsb_host.

Note, hpsb_get_tlabel calls the macro wait_event_interruptible with a
condition argument which has a side effect (allocation of a tlabel and
manipulation of the packet).  This side effect happens only if the
condition is true.  The patch relies on wait_event_interruptible not
evaluating the condition again after it became true.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:17:13 +02:00
Stefan Richter
9b4f2e9576 ieee1394: merge from Linus
Conflicts: drivers/ieee1394/hosts.c
Patch "lockdep: annotate ieee1394 skb-queue-head locking" was meddling
with patch "ieee1394: fix kerneldoc of hpsb_alloc_host".

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 18:19:31 +02:00
Danny Tholen
7334bb4ae9 [PATCH] 1394: fix for recently added firewire patch that breaks things on ppc
Recently a patch was added for preliminary suspend/resume handling on
!PPC_PMAC.  However, this broke both suspend and firewire on powerpc
because it saves the pci state after the device has already been disabled.

This moves the save state to before the pmac specific code.

Signed-off-by: Danny Tholen <obiwan@mailmij.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ben Collins <bcollins@ubuntu.com>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27 11:01:28 -07:00
Stefan Richter
e31f59ce59 [PATCH] ieee1394: sbp2: enable auto spin-up for Maxtor disks
At least Maxtor OneTouch III require a "start stop unit" command after auto
spin-down before the next access can proceed.  This patch activates the
responsible code in scsi_mod for all Maxtor SBP-2 disks.
https://bugzilla.novell.com/show_bug.cgi?id=183011

Maybe that should be done for all SBP-2 disks, but better be cautious.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06 08:57:48 -07:00
Ingo Molnar
d378834840 [PATCH] lockdep: annotate ieee1394 skb-queue-head locking
ieee1394 reuses the skb infrastructure of the networking code, and uses two
skb-head queues: ->pending_packet_queue and hpsbpkt_queue.  The latter is used
in the usual fashion: processed from a kernel thread.  The other one,
->pending_packet_queue is also processed from hardirq context (f.e.  in
hpsb_bus_reset()), which is not what the networking code usually does (which
completes from softirq or process context).  This locking assymetry can be
totally correct if done carefully, but it can also be dangerous if networking
helper functions are reused, which could assume traditional networking use.

It would probably be more robust to push this completion into a workqueue -
but technically the code can be 100% correct, and lockdep has to be taught
about it.  The solution is to split the ->pending_packet_queue skb-head->lock
class from the networking lock-class by using a private lock-validator key.

Has no effect on non-lockdep kernels.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:08 -07:00
Stefan Richter
3c6c65f5ed [PATCH] ieee1394: fix kerneldoc of hpsb_alloc_host
There was stuff between the comment and the function.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:37 -04:00
Stefan Richter
cab8d154e2 [PATCH] ieee1394: nodemgr: convert nodemgr_serialize semaphore to mutex
Another trivial sem2mutex conversion.

Side note:  nodemgr_serialize's purpose, when introduced in linux1394's
revision 529 in July 2002, was to protect several data structures which
are now largely handled by or together with Linux' driver core and are
now protected by the LDM's own mechanisms.  It may very well be possible
to remove this mutex now.  But fully parallelized node scanning is on
our long-term TODO list anyway; the mutex will certainly go away then.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:36 -04:00
Stefan Richter
d2f119fe31 [PATCH] ieee1394: nodemgr: switch to kthread api, replace reset semaphore
Convert nodemgr's host thread from kernel_thread to kthread and its
sleep/restart mechanism from a counting semaphore to a schedule()/
wake_up_process() scheme.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:35 -04:00
Stefan Richter
3a632fe232 [PATCH] ieee1394: nodemgr: make module parameter ignore_drivers writable
Nodemgr's ignore_drivers variable is exposed as a module load parameter
(therefore also as a sysfs attribute below /sys/module) and additionally
as an attribute below /sys/bus/ieee1394.  Since the latter is writable,
make the former writable too.

Note, the bus's attribute ignore_drivers is only relevant to newly added
units, not to present or suspended or resuming units.  Those have their
own attribute ignore_driver.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:35 -04:00
Stefan Richter
40fd89cc54 [PATCH] ieee1394: nodemgr: do not spawn kernel_thread for sysfs rescan
nodemgr.c::fw_set_rescan() is used to re-run the driver core over
nodemgr's representation of unit directories in order to initiate
protocol driver probes.  It is initiated via write access to one of
nodemgr's sysfs attributes.  The purpose is to attach drivers to
units after switching a unit's ignore_driver attribute from 1 to 0.

It is not really necessary to fork a kernel_thread for this job.  The
call to kernel_thread() can be eliminated to avoid the deprecated API
and to simplify the code a bit.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:34 -04:00
Stefan Richter
1ee0dc51fb [PATCH] ieee1394: nodemgr: remove unnecessary includes
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:33 -04:00
Stefan Richter
45289bf6ac [PATCH] ieee1394: raw1394: remove redundant counting semaphore
An already existing wait queue replaces raw1394's complete_sem which was
maintained in parallel to the wait queue.  The role of the semaphore's
counter is taken over by a direct check of what was really counted:  The
presence of items in the list of completed requests.

Notes:

 - raw1394_release() sleeps uninterruptibly until all requests were
   completed.  This is the same behaviour as before the patch.

 - The macros wait_event and wait_event_interruptible are called with a
   condition argument which has a side effect, i.e. manipulation of the
   requests list.  This side effect happens only if the condition is
   true.  The patch relies on the fact that wait_event[_interruptible]
   does not evaluate the condition again after it became true.

 - The diffstat looks unfavorable with respect to added lines of code.
   However 19 of them are comments, and some are due to separation of
   existing code blocks into two small helper functions.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:33 -04:00
Stefan Richter
438bd525e5 [PATCH] ieee1394: dv1394: sem2mutex conversion
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (not runtime-tested)
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:32 -04:00
Stefan Richter
d8831d5554 [PATCH] ieee1394: clean up declarations of hpsb_*_config_rom
hpsb_update_config_rom() is defined in csr.c, not hosts.c.
hpsb_get_config_rom() does not exist.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:31 -04:00
Stefan Richter
d83e7d8e7e [PATCH] ieee1394: remove unused macros HPSB_PANIC and HPSB_TRACE
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:31 -04:00
Stefan Richter
66faadfac3 [PATCH] ieee1394: remove redundant code from ieee1394_hotplug.h
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:30 -04:00
Stefan Richter
de4394f13c [PATCH] ieee1394: update #include directives in midlayer header files
Remove unnecessary includes, add missing includes.
Use forward type declarations for some structs.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:29 -04:00
Stefan Richter
e1d118f16d [PATCH] ieee1394: coding style and comment fixes in midlayer header files
Adjust tabulators, line wraps, empty lines, and comment style.
Update comments in ieee1394_transactions.h and highlevel.h.
Fix typo in comment in csr.h.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:28 -04:00
Stefan Richter
2b01b80b94 [PATCH] ieee1394: replace __inline__ by inline
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:28 -04:00
Stefan Richter
433a87d528 [PATCH] ieee1394: skip dummy loop in build_speed_map
The last loop in ieee1394 core's speed calculation is not required
unless ieee1394.h::IEEE1394_SPEED_MAX is changed from its current value
of 3.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:27 -04:00