Commit Graph

539 Commits

Author SHA1 Message Date
Linus Torvalds
bd2895eead Merge branch 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix build failure introduced by s/freezeable/freezable/
  workqueue: add system_freezeable_wq
  rds/ib: use system_wq instead of rds_ib_fmr_wq
  net/9p: replace p9_poll_task with a work
  net/9p: use system_wq instead of p9_mux_wq
  xfs: convert to alloc_workqueue()
  reiserfs: make commit_wq use the default concurrency level
  ocfs2: use system_wq instead of ocfs2_quota_wq
  ext4: convert to alloc_workqueue()
  scsi/scsi_tgt_lib: scsi_tgtd isn't used in memory reclaim path
  scsi/be2iscsi,qla2xxx: convert to alloc_workqueue()
  misc/iwmc3200top: use system_wq instead of dedicated workqueues
  i2o: use alloc_workqueue() instead of create_workqueue()
  acpi: kacpi*_wq don't need WQ_MEM_RECLAIM
  fs/aio: aio_wq isn't used in memory reclaim path
  input/tps6507x-ts: use system_wq instead of dedicated workqueue
  cpufreq: use system_wq instead of dedicated workqueues
  wireless/ipw2x00: use system_wq instead of dedicated workqueues
  arm/omap: use system_wq in mailbox
  workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER
2011-03-16 08:20:19 -07:00
NeilBrown
f0b4f7e2f2 md: Fix - again - partition detection when array becomes active
Revert
    b821eaa572
and
    f3b99be19d

When I wrote the first of these I had a wrong idea about the
lifetime of 'struct block_device'.  It can disappear at any time that
the block device is not open if it falls out of the inode cache.

So relying on the 'size' recorded with it to detect when the
device size has changed and so we need to revalidate, is wrong.

Rather, we really do need the 'changed' attribute stored directly in
the mddev and set/tested as appropriate.

Without this patch, a sequence of:
   mknod / open / close / unlink

(which can cause a block_device to be created and then destroyed)
will result in a rescan of the partition table and consequence removal
and addition of partitions.
Several of these in a row can get udev racing to create and unlink and
other code can get confused.

With the patch, the rescan is only performed when needed and so there
are no races.

This is suitable for any stable kernel from 2.6.35.

Reported-by: "Wojcik, Krzysztof" <krzysztof.wojcik@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org
2011-02-24 17:26:41 +11:00
Tejun Heo
43d133c18b Merge branch 'master' into for-2.6.39 2011-02-21 09:43:56 +01:00
NeilBrown
8f5f02c460 md: correctly handle probe of an 'mdp' device.
'mdp' devices are md devices with preallocated device numbers
for partitions. As such it is possible to mknod and open a partition
before opening the whole device.

this causes  md_probe() to be called with a device number of a
partition, which in-turn calls mddev_find with such a number.

However mddev_find expects the number of a 'whole device' and
does the wrong thing with partition numbers.

So add code to mddev_find to remove the 'partition' part of
a device number and just work with the 'whole device'.

This patch addresses https://bugzilla.kernel.org/show_bug.cgi?id=28652

Reported-by: hkmaly@bigfoot.com
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: <stable@kernel.org>
2011-02-16 13:58:51 +11:00
NeilBrown
cbe6ef1d26 md: don't set_capacity before array is active.
If the desired size of an array is set (via sysfs) before the array is
active (which is the normal sequence), we currrently call set_capacity
immediately.
This means that a subsequent 'open' (as can be caused by some
udev-triggers program) will notice the new size and try to probe for
partitions.  However as the array isn't quite ready yet the read will
fail.  Then when the array is read, as the size doesn't change again
we don't try to re-probe.

So when setting array size via sysfs, only call set_capacity if the
array is already active.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-16 13:58:38 +11:00
Chris Mason
e91ece5590 md_make_request: don't touch the bio after calling make_request
md_make_request was calling bio_sectors() for part_stat_add
after it was calling the make_request function.  This is
bad because the make_request function can free the bio and
because the bi_size field can change around.

The fix here was suggested by Jens Axboe.  It saves the
sector count before the make_request call.  I hit this
with CONFIG_DEBUG_PAGEALLOC turned on while trying to break
his pretty fusionio card.

Cc: <stable@kernel.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-08 09:53:28 +11:00
NeilBrown
c6751b2bde md: Don't allow slot_store while resync/recovery is happening.
Activating a spare in an array while resync/recovery is already
happening can lead the that spare being marked in-sync when it isn't
really.
So don't allow the 'slot' to be set (this activating the device)
while resync/recovery is happening.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-02 11:57:13 +11:00
NeilBrown
7281f8129c md: don't clear curr_resync_completed at end of resync.
There is no need to set this to zero at this point.  It will be
set to zero by remove_and_add_spares or at the start of
md_do_sync at the latest.
And setting it to zero before MD_RECOVERY_RUNNING is cleared can
make a 'zero' appear briefly in the 'sync_completed' sysfs attribute
just as resync is finishing.

So simply remove this setting to zero.


Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-31 14:30:27 +11:00
NeilBrown
a8c42c7f47 md: Don't use remove_and_add_spares to remove failed devices from a read-only array
remove_and_add_spares is called in two places where the needs really
are very different.
remove_and_add_spares should not be called on an array which is about
to be reshaped as some extra devices might have been manually added
and that would remove them.  However if the array is 'read-auto',
that will currently happen, which is bad.

So in the 'ro != 0' case don't call remove_and_add_spares but simply
remove the failed devices as the comment suggests is needed.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-31 13:47:13 +11:00
NeilBrown
f21e9ff7f7 md: Remove the AllReserved flag for component devices.
This flag is not needed and is used badly.

Devices that are included in a native-metadata array are reserved
exclusively for that array - and currently have AllReserved set.
They all are bd_claimed for the rdev and so cannot be shared.

Devices that are included in external-metadata arrays can be shared
among multiple arrays - providing there is no overlap.
These are bd_claimed for md in general - not for a particular rdev.

When changing the amount of a device that is used in an array we need
to check for overlap.  This currently includes a check on AllReserved
So even without overlap, sharing with an AllReserved device is not
allowed.
However the bd_claim usage already precludes sharing with these
devices, so the test on AllReserved is not needed.  And in fact it is
wrong.

As this is the only use of AllReserved, simply remove all usage and
definition of AllReserved.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-31 12:10:09 +11:00
NeilBrown
de171cb9a5 md: revert change to raid_disks on failure.
If we try to update_raid_disks and it fails, we should put
'delta_disks' back to zero.  This is important because some code,
such as slot_store, assumes that delta_disks has been validated.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-31 11:57:42 +11:00
Tejun Heo
ada609ee2a workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER
WQ_RESCUER is now an internal flag and should only be used in the
workqueue implementation proper.  Use WQ_MEM_RECLAIM instead.

This doesn't introduce any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: dm-devel@redhat.com
Cc: Neil Brown <neilb@suse.de>
2011-01-25 14:35:54 +01:00
Tejun Heo
49731baa41 block: restore multiple bd_link_disk_holder() support
Commit e09b457b (block: simplify holder symlink handling) incorrectly
assumed that there is only one link at maximum.  dm may use multiple
links and expects block layer to track reference count for each link,
which is different from and unrelated to the exclusive device holder
identified by @holder when the device is opened.

Remove the single holder assumption and automatic removal of the link
and revive the per-link reference count tracking.  The code
essentially behaves the same as before commit e09b457b sans the
unnecessary kobject reference count dancing.

While at it, note that this facility should not be used by anyone else
than the current ones.  Sysfs symlinks shouldn't be abused like this
and the whole thing doesn't belong in the block layer at all.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Milan Broz <mbroz@redhat.com>
Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Neil Brown <neilb@suse.de>
Cc: linux-raid@vger.kernel.org
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-14 18:44:22 +01:00
Linus Torvalds
509e4aef44 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
  md: Fix removal of extra drives when converting RAID6 to RAID5
  md: range check slot number when manually adding a spare.
  md/raid5: handle manually-added spares in start_reshape.
  md: fix sync_completed reporting for very large drives (>2TB)
  md: allow suspend_lo and suspend_hi to decrease as well as increase.
  md: Don't let implementation detail of curr_resync leak out through sysfs.
  md: separate meta and data devs
  md-new-param-to_sync_page_io
  md-new-param-to-calc_dev_sboffset
  md: Be more careful about clearing flags bit in ->recovery
  md: md_stop_writes requires mddev_lock.
  md/raid5: use sysfs_notify_dirent_safe to avoid NULL pointer
  md: Ensure no IO request to get md device before it is properly initialised.
  md: Fix single printks with multiple KERN_<level>s
  md: fix regression resulting in delays in clearing bits in a bitmap
  md: fix regression with re-adding devices to arrays with no metadata
2011-01-13 17:30:20 -08:00
NeilBrown
bf2cb0dab8 md: Fix removal of extra drives when converting RAID6 to RAID5
When a RAID6 is converted to a RAID5, the extra drive should
be discarded.  However it isn't due to a typo in a comparison.

This bug was introduced in commit e93f68a1fc in 2.6.35-rc4
and is suitable for any -stable since than.

As the extra drive is not removed, the 'degraded' counter is wrong and
so the RAID5 will not respond correctly to a subsequent failure.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-14 09:14:34 +11:00
NeilBrown
ba1b41b6b4 md: range check slot number when manually adding a spare.
When adding a spare to an active array, we should check the slot
number, but allow it to be larger than raid_disks if a reshape
is being prepared.

Apply the same test when adding a device to an
array-under-construction.  It already had most of the test in place,
but not quite all.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-14 09:14:34 +11:00
Rémi Rérolle
13ae864bc8 md: fix sync_completed reporting for very large drives (>2TB)
The values exported in the sync_completed file are unsigned long, which
overflows with very large drives, resulting in wrong values reported.

Since sync_completed uses sectors as unit, we'll start getting wrong
values with components larger than 2TB.

This patch simply replaces the use of unsigned long by unsigned long long.

Signed-off-by: Rémi Rérolle <rrerolle@lacie.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-14 09:14:34 +11:00
NeilBrown
23ddff3792 md: allow suspend_lo and suspend_hi to decrease as well as increase.
The sysfs attributes 'suspend_lo' and 'suspend_hi' describe a region
to which read/writes are suspended so that the under lying data can be
manipulated without user-space noticing.
Currently the window they describe can only move forwards along the
device.  However this is an unnecessary restriction which will cause
problems with planned developments.
So relax this restriction and allow these endpoints to move
arbitrarily.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-14 09:14:34 +11:00
NeilBrown
75d3da43cb md: Don't let implementation detail of curr_resync leak out through sysfs.
mddev->curr_resync has artificial values of '1' and '2' which are used
by the code which ensures only one resync is happening at a time on
any given device.

These values are internal and should never be exposed to user-space
(except when translated appropriately as in the 'pending' status in
/proc/mdstat).

Unfortunately they are as ->curr_resync is assigned to
->curr_resync_completed and that value is directly visible through
sysfs.

So change the assignments to ->curr_resync_completed to get the same
valued from elsewhere in a form that doesn't have the magic '1' or '2'
values.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-14 09:14:34 +11:00
Jonathan Brassow
a6ff7e089c md: separate meta and data devs
Allow the metadata to be on a separate device from the
data.

This doesn't mean the data and metadata will by on separate
physical devices - it simply gives device-mapper and userspace
tools more flexibility.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-14 09:14:34 +11:00
Jonathan Brassow
ccebd4c415 md-new-param-to_sync_page_io
Add new parameter to 'sync_page_io'.

The new parameter allows us to distinguish between metadata and data
operations.  This becomes important later when we add the ability to
use separate devices for data and metadata.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
2011-01-14 09:14:33 +11:00
Jonathan Brassow
57b2caa394 md-new-param-to-calc_dev_sboffset
When we allow for separate devices for data and metadata
in a later patch, we will need to be able to calculate
the superblock offset based on more than the bdev.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
2011-01-14 09:14:33 +11:00
NeilBrown
7ebc0be7ff md: Be more careful about clearing flags bit in ->recovery
Setting ->recovery to 0 is generally not a good idea as it could clear
bits that shouldn't be cleared.  In particular, MD_RECOVERY_FROZEN
should only be cleared on explicit request from user-space.

So when we need to clear things, just clear the bits that need
clearing.

As there are a few different places which reap a resync process - and
some do an incomplte job - factor out the code for doing the from
md_check_recovery and call that function instead of open coding part
of it.

Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by: Jonathan Brassow <jbrassow@redhat.com>
2011-01-14 09:14:33 +11:00
NeilBrown
defad61a5b md: md_stop_writes requires mddev_lock.
As md_stop_writes manipulates the sync_thread and calls md_update_sb,
it need to be called with mddev_lock held.

In all internal cases it is, but the symbol is exported for dm-raid to
call and in that case the lock won't be help.
Do make an exported version which takes the lock, and an internal
version which does not.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-14 09:14:33 +11:00
NeilBrown
0ca69886a8 md: Ensure no IO request to get md device before it is properly initialised.
When an md device is in the process of coming on line it is possible
for an IO request (typically a partition table probe) to get through
before the array is fully initialised, which can cause unexpected
behaviour (e.g. a crash).

So explicitly record when the array is ready for IO and don't allow IO
through until then.

There is no possibility for a similar problem when the array is going
off-line as there must only be one 'open' at that time, and it is busy
off-lining the array and so cannot send IO requests.  So no memory
barrier is needed in md_stop()

This has been a bug since commit 409c57f380 in 2.6.30 which
introduced md_make_request.  Before then, each personality would
register its own make_request_fn when it was ready.
This is suitable for any stable kernel from 2.6.30.y onwards.

Cc: <stable@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by:  "Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@intel.com>
2011-01-14 09:14:33 +11:00
NeilBrown
6c98791014 md: fix regression resulting in delays in clearing bits in a bitmap
commit 589a594be1 (2.6.37-rc4) fixed a problem were md_thread would
sometimes call the ->run function at a bad time.

If an error is detected during array start up after the md_thread has
been started, the md_thread is killed.  This resulted in the ->run
function being called once.  However the array may not be in a state
that it is safe to call ->run.

However the fix imposed meant that  ->run was not called on a timeout.
This means that when an array goes idle, bitmap bits do not get
cleared promptly.  While the array is busy the bits will still be
cleared when appropriate so this is not very serious.  There is no
risk to data.

Change the test so that we only avoid calling ->run when the thread
is being stopped.  This more explicitly addresses the problem situation.

This is suitable for 2.6.37-stable and any -stable kernel to which
589a594be1 was applied.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-14 09:13:53 +11:00
Linus Torvalds
275220f0fc Merge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
  block: ensure that completion error gets properly traced
  blktrace: add missing probe argument to block_bio_complete
  block cfq: don't use atomic_t for cfq_group
  block cfq: don't use atomic_t for cfq_queue
  block: trace event block fix unassigned field
  block: add internal hd part table references
  block: fix accounting bug on cross partition merges
  kref: add kref_test_and_get
  bio-integrity: mark kintegrityd_wq highpri and CPU intensive
  block: make kblockd_workqueue smarter
  Revert "sd: implement sd_check_events()"
  block: Clean up exit_io_context() source code.
  Fix compile warnings due to missing removal of a 'ret' variable
  fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
  block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
  cfq-iosched: don't check cfqg in choose_service_tree()
  fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
  cdrom: export cdrom_check_events()
  sd: implement sd_check_events()
  sr: implement sr_check_events()
  ...
2011-01-13 10:45:01 -08:00
NeilBrown
bf572541ab md: fix regression with re-adding devices to arrays with no metadata
Commit 1a855a0606 (2.6.37-rc4) fixed a problem where devices were
re-added when they shouldn't be but caused a regression in a less
common case that means sometimes devices cannot be re-added when they
should be.

In particular, when re-adding a device to an array without metadata
we should always access the device, but after the above commit we
didn't.

This patch sets the In_sync flag in that case so that the re-add
succeeds.

This patch is suitable for any -stable kernel to which 1a855a0606 was
applied.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-12 09:03:35 +11:00
Linus Torvalds
7f8635cc9e Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cciss: fix cciss_revalidate panic
  block: max hardware sectors limit wrapper
  block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead
  blk-throttle: Correct the placement of smp_rmb()
  blk-throttle: Trim/adjust slice_end once a bio has been dispatched
  block: check for proper length of iov entries earlier in blk_rq_map_user_iov()
  drbd: fix for spin_lock_irqsave in endio callback
  drbd: don't recvmsg with zero length
2010-12-20 09:19:46 -08:00
Martin K. Petersen
e692cb668f block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead
When stacking devices, a request_queue is not always available. This
forced us to have a no_cluster flag in the queue_limits that could be
used as a carrier until the request_queue had been set up for a
metadevice.

There were several problems with that approach. First of all it was up
to the stacking device to remember to set queue flag after stacking had
completed. Also, the queue flag and the queue limits had to be kept in
sync at all times. We got that wrong, which could lead to us issuing
commands that went beyond the max scatterlist limit set by the driver.

The proper fix is to avoid having two flags for tracking the same thing.
We deprecate QUEUE_FLAG_CLUSTER and use the queue limit directly in the
block layer merging functions. The queue_limit 'no_cluster' is turned
into 'cluster' to avoid double negatives and to ease stacking.
Clustering defaults to being enabled as before. The queue flag logic is
removed from the stacking function, and explicitly setting the cluster
flag is no longer necessary in DM and MD.

Reported-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 08:35:53 +01:00
NeilBrown
589a594be1 md: protect against NULL reference when waiting to start a raid10.
When we fail to start a raid10 for some reason, we call
md_unregister_thread to kill the thread that was created.

Unfortunately md_thread() will then make one call into the handler
(raid10d) even though md_wakeup_thread has not been called.  This is
not safe and as md_unregister_thread is called after mddev->private
has been set to NULL, it will definitely cause a NULL dereference.

So fix this at both ends:
 - md_thread should only call the handler if THREAD_WAKEUP has been
   set.
 - raid10 should call md_unregister_thread before setting things
   to NULL just like all the other raid modules do.

This is applicable to 2.6.35 and later.

Cc: stable@kernel.org
Reported-by: "Citizen" <citizen_lee@thecus.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-12-09 17:02:14 +11:00
NeilBrown
1a855a0606 md: fix bug with re-adding of partially recovered device.
With v0.90 metadata, a hot-spare does not become a full member of the
array until recovery is complete.  So if we re-add such a device to
the array, we know that all of it is as up-to-date as the event count
would suggest, and so it a bitmap-based recovery is possible.

However with v1.x metadata, the hot-spare immediately becomes a full
member of the array, but it record how much of the device has been
recovered.  If the array is stopped and re-assembled recovery starts
from this point.

When such a device is hot-added to an array we currently lose the 'how
much is recovered' information and incorrectly included it as a full
in-sync member (after bitmap-based fixup).
This is wrong and unsafe and could corrupt data.

So be more careful about setting saved_raid_disk - which is what
guides the re-adding of devices back into an array.
The new code matches the code in slot_store which does a similar
thing, which is encouraging.

This is suitable for any -stable kernel.

Reported-by: "Dailey, Nate" <Nate.Dailey@stratus.com>
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2010-12-09 16:36:28 +11:00
NeilBrown
a035fc3e25 md: fix possible deadlock in handling flush requests.
As recorded in
    https://bugzilla.kernel.org/show_bug.cgi?id=24012

it is possible for a flush request through md to hang.  This is due to
an interaction between the recursion avoidance in
generic_make_request, the insistence in md of only having one flush
active at a time, and the possibility of dm (or md) submitting two
flush requests to a device from the one generic_make_request.

If a generic_make_request call into dm causes two flush requests to be
queued (as happens if the dm table has two targets - they get one
each), these two will be queued inside generic_make_request.

Assume they are for the same md device.
The first is processed and causes 1 or more flush requests to be sent
to lower devices.  These get queued within generic_make_request too.
Then the second flush to the md device gets handled and it blocks
waiting for the first flush to complete.  But it won't complete until
the two lower-device requests complete, and they haven't even been
submitted yet as they are on the generic_make_request queue.

The deadlock can be broken by using a separate thread to submit the
requests to lower devices.  md has such a thread readily available:
md_wq.

So use it to submit these requests.

Reported-by: Giacomo Catenazzi <cate@cateee.net>
Tested-by: Giacomo Catenazzi <cate@cateee.net>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-12-09 16:17:51 +11:00
NeilBrown
a7a07e6965 md: move code in to submit_flushes.
submit_flushes is called from exactly one place.
Move the code that is before and after that call into
submit_flushes.

This has not functional change, but will make the next patch
smaller and easier to follow.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-12-09 16:04:25 +11:00
NeilBrown
2b74e12e56 md: remove handling of flush_pending in md_submit_flush_data
None of the functions called between setting flush_pending to 1, and
atomic_dec_and_test can change flush_pending, or will anything
running in any other thread (as ->flush_bio is not NULL).  So the
atomic_dec_and_test will always succeed.
So remove the atomic_sec and the atomic_dec_and_test.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-12-09 15:59:01 +11:00
Jens Axboe
f30195c502 Merge branch 'cleanup-bd_claim' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into for-2.6.38/core 2010-11-27 19:49:18 +01:00
Darrick J. Wong
be20e6c67b md: Call blk_queue_flush() to establish flush/fua support
Before 2.6.37, the md layer had a mechanism for catching I/Os with the
barrier flag set, and translating the barrier into barriers for all
the underlying devices.  With 2.6.37, I/O barriers have become plain
old flushes, and the md code was updated to reflect this.  However,
one piece was left out -- the md layer does not tell the block layer
that it supports flushes or FUA access at all, which results in md
silently dropping flush requests.

Since the support already seems there, just add this one piece of
bookkeeping.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-11-24 16:40:33 +11:00
Justin Maggard
c26a44ed1e md: fix return value of rdev_size_change()
When trying to grow an array by enlarging component devices,
rdev_size_store() expects the return value of rdev_size_change() to be
in sectors, but the actual value is returned in KBs.

This functionality was broken by commit
     dd8ac336c1
so this patch is suitable for any kernel since 2.6.30.

Cc: stable@kernel.org
Signed-off-by: Justin Maggard <jmaggard10@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-11-24 16:36:17 +11:00
Tejun Heo
d4d7762995 block: clean up blkdev_get() wrappers and their users
After recent blkdev_get() modifications, open_by_devnum() and
open_bdev_exclusive() are simple wrappers around blkdev_get().
Replace them with blkdev_get_by_dev() and blkdev_get_by_path().

blkdev_get_by_dev() is identical to open_by_devnum().
blkdev_get_by_path() is slightly different in that it doesn't
automatically add %FMODE_EXCL to @mode.

All users are converted.  Most conversions are mechanical and don't
introduce any behavior difference.  There are several exceptions.

* btrfs now sets FMODE_EXCL in btrfs_device->mode, so there's no
  reason to OR it explicitly on blkdev_put().

* gfs2, nilfs2 and the generic mount_bdev() now set FMODE_EXCL in
  sb->s_mode.

* With the above changes, sb->s_mode now always should contain
  FMODE_EXCL.  WARN_ON_ONCE() added to kill_block_super() to detect
  errors.

The new blkdev_get_*() functions are with proper docbook comments.
While at it, add function description to blkdev_get() too.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Joern Engel <joern@lazybastard.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: reiserfs-devel@vger.kernel.org
Cc: xfs-masters@oss.sgi.com
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-11-13 11:55:18 +01:00
Tejun Heo
e525fd89d3 block: make blkdev_get/put() handle exclusive access
Over time, block layer has accumulated a set of APIs dealing with bdev
open, close, claim and release.

* blkdev_get/put() are the primary open and close functions.

* bd_claim/release() deal with exclusive open.

* open/close_bdev_exclusive() are combination of open and claim and
  the other way around, respectively.

* bd_link/unlink_disk_holder() to create and remove holder/slave
  symlinks.

* open_by_devnum() wraps bdget() + blkdev_get().

The interface is a bit confusing and the decoupling of open and claim
makes it impossible to properly guarantee exclusive access as
in-kernel open + claim sequence can disturb the existing exclusive
open even before the block layer knows the current open if for another
exclusive access.  Reorganize the interface such that,

* blkdev_get() is extended to include exclusive access management.
  @holder argument is added and, if is @FMODE_EXCL specified, it will
  gain exclusive access atomically w.r.t. other exclusive accesses.

* blkdev_put() is similarly extended.  It now takes @mode argument and
  if @FMODE_EXCL is set, it releases an exclusive access.  Also, when
  the last exclusive claim is released, the holder/slave symlinks are
  removed automatically.

* bd_claim/release() and close_bdev_exclusive() are no longer
  necessary and either made static or removed.

* bd_link_disk_holder() remains the same but bd_unlink_disk_holder()
  is no longer necessary and removed.

* open_bdev_exclusive() becomes a simple wrapper around lookup_bdev()
  and blkdev_get().  It also has an unexpected extra bdev_read_only()
  test which probably should be moved into blkdev_get().

* open_by_devnum() is modified to take @holder argument and pass it to
  blkdev_get().

Most of bdev open/close operations are unified into blkdev_get/put()
and most exclusive accesses are tested atomically at the open time (as
it should).  This cleans up code and removes some, both valid and
invalid, but unnecessary all the same, corner cases.

open_bdev_exclusive() and open_by_devnum() can use further cleanup -
rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop
special features.  Well, let's leave them for another day.

Most conversions are straight-forward.  drbd conversion is a bit more
involved as there was some reordering, but the logic should stay the
same.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Brown <neilb@suse.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: dm-devel@redhat.com
Cc: drbd-dev@lists.linbit.com
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Joern Engel <joern@logfs.org>
Cc: reiserfs-devel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-11-13 11:55:17 +01:00
Tejun Heo
e09b457bdb block: simplify holder symlink handling
Code to manage symlinks in /sys/block/*/{holders|slaves} are overly
complex with multiple holder considerations, redundant extra
references to all involved kobjects, unused generic kobject holder
support and unnecessary mixup with bd_claim/release functionalities.

Strip it down to what's necessary (single gendisk holder) and make it
use a separate interface.  This is a step for cleaning up
bd_claim/release.  This patch makes dm-table slightly more complex but
it will be simplified again with further changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Brown <neilb@suse.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
2010-11-13 11:55:17 +01:00
Mike Snitzer
77304d2aba block: read i_size with i_size_read()
Convert direct reads of an inode's i_size to using i_size_read().

i_size_{read,write} use a seqcount to protect reads from accessing
incomple writes.  Concurrent i_size_write()s require mutual exclussion
to protect the seqcount that is used by i_size_{read,write}.  But
i_size_read() callers do not need to use additional locking.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: NeilBrown <neilb@suse.de>
Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:40:53 +01:00
NeilBrown
a167f66324 md: use separate bio pool for each md device.
bio_clone and bio_alloc allocate from a common bio pool.
If an md device is stacked with other devices that use this pool, or under
something like swap which uses the pool, then the multiple calls on
the pool can cause deadlocks.

So allocate a local bio pool for each md array and use that rather
than the common pool.

This pool is used both for regular IO and metadata updates.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-28 17:36:15 +11:00
NeilBrown
2b193363ef md: change type of first arg to sync_page_io.
Currently sync_page_io takes a 'bdev'.
Every caller passes 'rdev->bdev'.
We will soon want another field out of the rdev in sync_page_io,
So just pass the rdev instead of the bdev out of it.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-28 17:36:11 +11:00
Tejun Heo
e804ac780e md: fix and update workqueue usage
Workqueue usage in md has two problems.

* Flush can be used during or depended upon by memory reclaim, but md
  uses the system workqueue for flush_work which may lead to deadlock.

* md depends on flush_scheduled_work() to achieve exclusion against
  completion of removal of previous instances.  flush_scheduled_work()
  may incur unexpected amount of delay and is scheduled to be removed.

This patch adds two workqueues to md - md_wq and md_misc_wq.  The
former is guaranteed to make forward progress under memory pressure
and serves flush_work.  The latter serves as the flush domain for
other works.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-28 17:32:29 +11:00
NeilBrown
4b532c9b8c md: remove md_mutex locking.
lock_kernel calls were recently pushed down into open/release
functions.
md doesn't need that protection.
Then the BKL calls were change to md_mutex.  We don't need those
either.
So remove it all.

Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-28 17:30:21 +11:00
NeilBrown
d97a41dc9c md: Fix regression with raid1 arrays without persistent metadata.
A RAID1 which has no persistent metadata, whether internal or
external, will hang on the first write.
This is caused by commit  070dc6dd71
In that case, MD_CHANGE_PENDING never gets cleared.

So during md_update_sb, is neither persistent or external,
clear MD_CHANGE_PENDING.

This is suitable for 2.6.36-stable.

Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org
2010-10-28 17:30:20 +11:00
Linus Torvalds
a2887097f2 Merge branch 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits)
  xen-blkfront: disable barrier/flush write support
  Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c
  block: remove BLKDEV_IFL_WAIT
  aic7xxx_old: removed unused 'req' variable
  block: remove the BH_Eopnotsupp flag
  block: remove the BLKDEV_IFL_BARRIER flag
  block: remove the WRITE_BARRIER flag
  swap: do not send discards as barriers
  fat: do not send discards as barriers
  ext4: do not send discards as barriers
  jbd2: replace barriers with explicit flush / FUA usage
  jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
  jbd: replace barriers with explicit flush / FUA usage
  nilfs2: replace barriers with explicit flush / FUA usage
  reiserfs: replace barriers with explicit flush / FUA usage
  gfs2: replace barriers with explicit flush / FUA usage
  btrfs: replace barriers with explicit flush / FUA usage
  xfs: replace barriers with explicit flush / FUA usage
  block: pass gfp_mask and flags to sb_issue_discard
  dm: convey that all flushes are processed as empty
  ...
2010-10-22 17:07:18 -07:00
Linus Torvalds
c37927d435 Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  block: autoconvert trivial BKL users to private mutex
  drivers: autoconvert trivial BKL users to private mutex
  ipmi: autoconvert trivial BKL users to private mutex
  mac: autoconvert trivial BKL users to private mutex
  mtd: autoconvert trivial BKL users to private mutex
  scsi: autoconvert trivial BKL users to private mutex

Fix up trivial conflicts (due to addition of private mutex right next to
deletion of a version string) in drivers/char/pcmcia/cm40[04]0_cs.c
2010-10-22 10:49:54 -07:00
Jens Axboe
fa251f8990 Merge branch 'v2.6.36-rc8' into for-2.6.37/barrier
Conflicts:
	block/blk-core.c
	drivers/block/loop.c
	mm/swapfile.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-19 09:13:04 +02:00