Commit Graph

21 Commits

Author SHA1 Message Date
David Chinner
75de2a91c9 [XFS] Account for inode cluster alignment in all allocations
At ENOSPC, we can get a filesystem shutdown due to a cancelling a dirty
transaction in xfs_mkdir or xfs_create. This is due to the initial
allocation attempt not taking into account inode alignment and hence we
can prepare the AGF freelist for allocation when it's not actually
possible to do an allocation. This results in inode allocation returning
ENOSPC with a dirty transaction, and hence we shut down the filesystem.

Because the first allocation is an exact allocation attempt, we must tell
the allocator that the alignment does not affect the allocation attempt.
i.e. we will accept any extent alignment as long as the extent starts at
the block we want. Unfortunately, this means that if the longest free
extent is less than the length + alignment necessary for fallback
allocation attempts but is long enough to attempt a non-aligned
allocation, we will modify the free list.

If we then have the exact allocation fail, all other allocation attempts
will also fail due to the alignment constraint being taken into account.
Hence the initial attempt needs to set the "alignment slop" field so that
alignment, while not required, must be taken into account when determining
if there is enough space left in the AG to do the allocation.

That means if the exact allocation fails, we will not dirty the freelist
if there is not enough space available fo a subsequent allocation to
succeed. Hence we get an ENOSPC error back to userspace without shutting
down the filesystem.

SGI-PV: 978886
SGI-Modid: xfs-linux-melb:xfs-kern:30699a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18 11:42:09 +10:00
Eric Sandeen
6211870992 [XFS] remove shouting-indirection macros from xfs_sb.h
Remove macro-to-small-function indirection from xfs_sb.h, and remove some
which are completely unused.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30528a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-10 16:24:45 +10:00
Josef Jeff Sipek
1bd960ee2b [XFS] If you mount an XFS filesystem with no mount options at all, then
the "ikeep" option is set rather than "noikeep".

This regression was introduced in 970451.

With no mount options specified, xfs_parseargs() does the following:

int ikeep = 0;

args->flags |= XFSMNT_BARRIER;

args->flags2 |= XFSMNT2_COMPAT_IOSIZE;

if (!options)

goto done;

It only sets the above two options by default and before, it also used to
set XFSMNT_IDELETE by default.

If options are specified, then

if (!(args->flags & XFSMNT_DMAPI) && !ikeep)

args->flags |= XFSMNT_IDELETE;

is executed later on which is skipped by the "goto done;" above.

The solution is to invert the logic.

SGI-PV: 977771
SGI-Modid: xfs-linux-melb:xfs-kern:30590a

Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-28 20:37:56 -08:00
Marcin Slusarz
413d57c990 xfs: convert beX_add to beX_add_cpu (new common API)
remove beX_add functions and replace all uses with beX_add_cpu

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Dave Chinner <dgc@sgi.com>
Cc: Timothy Shimmin <tes@sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-13 16:21:19 -08:00
Christoph Hellwig
347d1c0195 [XFS] dinode endianess annotations
Biggest bit is duplicating the dinode structure so we have one annotated for
native endianess and one for disk endianess. The other significant change
is that xfs_xlate_dinode_core is split into one helper per direction to
allow for proper annotations, everything else is trivial.

As a sidenode splitting out the incore dinode means we can move it into
xfs_inode.h in a later patch and severely improving on the include hell in
xfs.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29476a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15 16:48:30 +10:00
David Chinner
92821e2ba4 [XFS] Lazy Superblock Counters
When we have a couple of hundred transactions on the fly at once, they all
typically modify the on disk superblock in some way.
create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify
free block counts.

When these counts are modified in a transaction, they must eventually lock
the superblock buffer and apply the mods. The buffer then remains locked
until the transaction is committed into the incore log buffer. The result
of this is that with enough transactions on the fly the incore superblock
buffer becomes a bottleneck.

The result of contention on the incore superblock buffer is that
transaction rates fall - the more pressure that is put on the superblock
buffer, the slower things go.

The key to removing the contention is to not require the superblock fields
in question to be locked. We do that by not marking the superblock dirty
in the transaction. IOWs, we modify the incore superblock but do not
modify the cached superblock buffer. In short, we do not log superblock
modifications to critical fields in the superblock on every transaction.
In fact we only do it just before we write the superblock to disk every
sync period or just before unmount.

This creates an interesting problem - if we don't log or write out the
fields in every transaction, then how do the values get recovered after a
crash? the answer is simple - we keep enough duplicate, logged information
in other structures that we can reconstruct the correct count after log
recovery has been performed.

It is the AGF and AGI structures that contain the duplicate information;
after recovery, we walk every AGI and AGF and sum their individual
counters to get the correct value, and we do a transaction into the log to
correct them. An optimisation of this is that if we have a clean unmount
record, we know the value in the superblock is correct, so we can avoid
the summation walk under normal conditions and so mount/recovery times do
not change under normal operation.

One wrinkle that was discovered during development was that the blocks
used in the freespace btrees are never accounted for in the AGF counters.
This was once a valid optimisation to make; when the filesystem is full,
the free space btrees are empty and consume no space. Hence when it
matters, the "accounting" is correct. But that means the when we do the
AGF summations, we would not have a correct count and xfs_check would
complain. Hence a new counter was added to track the number of blocks used
by the free space btrees. This is an *on-disk format change*.

As a result of this, lazy superblock counters are a mkfs option and at the
moment on linux there is no way to convert an old filesystem. This is
possible - xfs_db can be used to twiddle the right bits and then
xfs_repair will do the format conversion for you. Similarly, you can
convert backwards as well. At some point we'll add functionality to
xfs_admin to do the bit twiddling easily....

SGI-PV: 964999
SGI-Modid: xfs-linux-melb:xfs-kern:28652a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:28:50 +10:00
David Chinner
7989cb8ef5 [XFS] Keep stack usage down for 4k stacks by using noinline.
gcc-4.1 and more recent aggressively inline static functions which
increases XFS stack usage by ~15% in critical paths. Prevent this from
occurring by adding noinline to the STATIC definition.

Also uninline some functions that are too large to be inlined and were
causing problems with CONFIG_FORCED_INLINING=y.

Finally, clean up all the different users of inline, __inline and
__inline__ and put them under one STATIC_INLINE macro. For debug kernels
the STATIC_INLINE macro uninlines those functions.

SGI-PV: 957159
SGI-Modid: xfs-linux-melb:xfs-kern:27585a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: David Chatterton <chatz@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10 18:34:56 +11:00
Nathan Scott
745b1f47fc [XFS] Remove last bulkstat false-positives with debug kernels.
SGI-PV: 953819
SGI-Modid: xfs-linux-melb:xfs-kern:26628a

Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-09-28 11:02:23 +10:00
Nathan Scott
1121b219bf [XFS] use NULL for pointer initialisation instead of zero-cast-to-ptr
SGI-PV: 954580
SGI-Modid: xfs-linux-melb:xfs-kern:26562a

Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-09-28 10:58:40 +10:00
Christoph Hellwig
61a2584867 [XFS] endianess annotations for xfs_inobt_rec_t / xfs_inobt_key_t
SGI-PV: 954580
SGI-Modid: xfs-linux-melb:xfs-kern:26556a

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-09-28 10:57:04 +10:00
Nathan Scott
f6c2d1fa63 [XFS] Remove version 1 directory code. Never functioned on Linux, just
pure bloat.

SGI-PV: 952969
SGI-Modid: xfs-linux-melb:xfs-kern:26251a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-20 13:04:51 +10:00
Nathan Scott
4d1a2ed3d8 [XFS] Fix up debug code so that bulkstat wont generate thousands of
fsstress warnings.

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26111a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 17:12:28 +10:00
Nathan Scott
019ff2d57b [XFS] Fix a problem in aligning inode allocations to stripe unit
boundaries.

SGI-PV: 951862
SGI-Modid: xfs-linux-melb:xfs-kern:25726a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-04-11 15:45:05 +10:00
Glen Overby
3ccb8b5f65 [XFS] A change to inode chunk allocation to try allocating the new chunk
contiguous with the most recently allocated chunk.  On a striped
filesystem, this will fill a stripe unit with inodes before allocating new
inodes in another stripe unit.

SGI-PV: 951416
SGI-Modid: xfs-linux-melb:xfs-kern:208488a

Signed-off-by: Glen Overby <overby@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-29 09:52:28 +10:00
Nathan Scott
c41564b5af [XFS] We really suck at spulling. Thanks to Chris Pascoe for fixing all
these typos.

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:25539a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-29 08:55:14 +10:00
Nathan Scott
f30a121111 [XFS] Dynamically allocate the xfs_dinode_core_t structure to reduce our
stack footprint in xfs_ialloc_ag_alloc.

SGI-PV: 947312
SGI-Modid: xfs-linux-melb:xfs-kern:25420a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-14 14:07:36 +11:00
Christoph Hellwig
16259e7d95 [XFS] Endianess annotations for various allocator data structures
SGI-PV: 943272
SGI-Modid: xfs-linux:xfs-kern:201006a

Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 15:11:25 +11:00
Nathan Scott
7b71876980 [XFS] Update license/copyright notices to match the prefered SGI
boilerplate.

SGI-PV: 913862
SGI-Modid: xfs-linux:xfs-kern:23903a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 14:58:39 +11:00
Nathan Scott
a844f4510d [XFS] Remove xfs_macros.c, xfs_macros.h, rework headers a whole lot.
SGI-PV: 943122
SGI-Modid: xfs-linux:xfs-kern:23901a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 14:38:42 +11:00
Christoph Hellwig
da1650a5d6 [XFS] Add format checking to cmn_err and icmn_err
SGI-PV: 942243
SGI-Modid: xfs-linux:xfs-kern:198658a

Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 10:21:35 +11:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00