Commit Graph

220 Commits

Author SHA1 Message Date
Jarod Wilson
384170da93 firewire: fw-sbp2: Use sbp2 device-provided mgt orb timeout for logins
To be more compliant with section 7.4.8 of the SBP-2 specification,
use the mgt_ORB_timeout specified in the SBP-2 device's config rom
for login ORB attempts (though with some sanity checks). A happy
side-effect is that certain device and controller combinations that
sometimes take more than 20 seconds to get synced up (like my laptop
with just about any SBP-2 device) now function more reliably.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (silenced sparse)
2008-01-30 22:22:29 +01:00
Jarod Wilson
a4c379c197 firewire: fw-sbp2: increase login orb reply timeout, fix "failed to login"
Increase (and rename) the login orb reply timeout value to 20s
to match that of the old firewire stack. 2s simply didn't give
many devices enough time to spin up and reply.

Fixes inability to recognize some devices.
Failure mode was "orb reply timed out"/"failed to login".

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (style, comments, changelog)
2008-01-30 22:22:28 +01:00
Jarod Wilson
8f9f963e5d firewire: replace subtraction with bitwise and
Replace an unnecessary subtraction with a bitwise AND when determining the
value of ext_tcode in fw_fill_transaction() to save a cpu cycle or two in a
somewhat critical path.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:28 +01:00
Stefan Richter
f8d2dc3938 firewire: fw-core: react on bus resets while the config ROM is being fetched
read_rom() obtained a fresh new fw_device.generation for each read
transaction.  Hence it was able to continue reading in the middle of the
ROM even if a bus reset happened.  However the device may have modified
the ROM during the reset.  We would end up with a corrupt fetched ROM
image then.

Although all of this is quite unlikely, it is not impossible.
Therefore we now restart reading the ROM if the bus generation changed.

Note, the memory barrier in read_rom() is still necessary according to
tests by Jarod Wilson, despite of the ->generation access being moved up
in the call chain.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

This is essentially what I've been beating on locally, and I've yet to hit
another config rom read failure with it.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
2008-01-30 22:22:28 +01:00
Stefan Richter
b5d2a5e04e firewire: enforce access order between generation and node ID, fix "giving up on config rom"
fw_device.node_id and fw_device.generation are accessed without mutexes.
We have to ensure that all readers will get to see node_id updates
before generation updates.

Fixes an inability to recognize devices after "giving up on config rom",
https://bugzilla.redhat.com/show_bug.cgi?id=429950

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

Reviewed by Nick Piggin <nickpiggin@yahoo.com.au>.

Verified to fix 'giving up on config rom' issues on multiple system and
drive combinations that were previously affected.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2008-01-30 22:22:27 +01:00
Stefan Richter
cf5a56ac80 firewire: fw-cdev: use device generation, not card generation
We have to use the fw_device.generation here, not the fw_card.generation,
because the generation must never be newer than the node ID when we emit
a transaction.  This cannot be guaranteed with fw_card.generation.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

Verified in concert with subsequent memory barriers patch to fix 'giving
up on config rom' issues on multiple system and drive combinations that
were previously affected.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
2008-01-30 22:22:27 +01:00
Stefan Richter
5a8a1bcd15 firewire: fw-sbp2: use device generation, not card generation
There was a small window where a login or reconnect job could use an
already updated card generation with an outdated node ID.  We have to
use the fw_device.generation here, not the fw_card.generation, because
the generation must never be newer than the node ID when we emit a
transaction.  This cannot be guaranteed with fw_card.generation.

Furthermore, the target's and initiator's node IDs can be obtained from
fw_device and fw_card.  Dereferencing their underlying topology objects
is not necessary.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

Verified in concert with subsequent memory barriers patch to fix 'giving
up on config rom' issues on multiple system and drive combinations that
were previously affected.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
2008-01-30 22:22:26 +01:00
Stefan Richter
14dc992aa7 firewire: fw-sbp2: try to increase reconnect_hold (speed up reconnection)
Ask the target to grant 4 seconds instead of the standard and minimum of
1 second window after bus reset for reconnection.  This accelerates
reconnection if there are more than one targets on the bus:  If a login
and inquiry to one target blocks the fw-sbp2 workqueue for more than 1s
after bus reset, we now still can reconnect to the other target.

Before that, fw-sbp2's reconnect attempts would be rejected with "error
status: 0:9" (function rejected), and fw-sbp2 would finally re-login.
All those futile reconnect attemps cost extra time until the target
which needs re-login is ready for I/O again.

The reconnect timeout field in the login ORB doesn't have to be honored
by the target though.  I found that we could get up to
  - allegedly 32768s from an old OXFW911 firmware
  - 256s from LSI bridges
  - 4s from OXUF922 and OXFW912 bridges,
  - 2s from TI bridges,
  - only the standard 1s from Initio and Prolific bridges and from
    Apple OpenFirmware in target mode.

We just try to get 4 seconds which already covers the case of a few
HDDs on the same bus quite nicely.

A minor drawback occurs in the following (rare and impractical) border
case:
  - two initiators are there, initiator 1 holds an exclusive login to
    a target,
  - initiator 1 goes off the bus,
  - target refuses login attempts from initiator 2 until reconnect_hold
    seconds after bus reset.

An alternative approach to the issue at hand would be to parallelize
fw-sbp2's reconnect and login work.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Jarod Wilson <jwilson@redhat.com>
2008-01-30 22:22:26 +01:00
Stefan Richter
4dccd020d7 firewire: fw-sbp2: skip unnecessary logout
Don't attempt to send a logout ORB if the target was already unplugged
or had its link switched off.  If two targets are attached, this
enhances the chance to quickly reconnect to the remaining target when
one target is plugged out.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Jarod Wilson <jwilson@redhat.com>
2008-01-30 22:22:26 +01:00
David Moore
fe5ca63430 firewire: fw-ohci: Dynamically allocate buffers for DMA descriptors
Previously, the fw-ohci driver used fixed-length buffers for storing
descriptors for isochronous receive DMA programs.  If an application
(such as libdc1394) generated a DMA program that was too large, fw-ohci
would reach the limit of its fixed-sized buffer and return an error to
userspace.

This patch replaces the fixed-length ring-buffer with a linked-list of
page-sized buffers.  Additional buffers can be dynamically allocated and
appended to the list when necessary.  For a particular context, buffers
are kept around after use and reused as necessary, so there is no
allocation taking place after the DMA program is generated for the first
time.

In addition, the buffers it uses are coherent for DMA so there is no
syncing required before and after writes.  This syncing wasn't properly
done in the previous version of the code.

-

This is the fourth version of my patch that replaces a fixed-length
buffer for DMA descriptors with a dynamically allocated linked-list of
buffers.

As we discovered with the last attempt, new context programs are
sometimes queued from interrupt context, making it unacceptable to call
tasklet_disable() from context_get_descriptors().

This version of the patch uses ohci->lock for all locking needs instead
of tasklet_disable/enable.  There is a new requirement that
context_get_descriptors() be called while holding ohci->lock.  It was
already held for the AT context, so adding the requirement for the iso
context did not seem particularly onerous.  In addition, this has the
side benefit of allowing iso queue to be safely called from concurrent
user-space threads, which previously was not safe.

Signed-off-by: David Moore <dcm@acm.org>
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Jarod Wilson <jwilson@redhat.com>

-

Fixes the following issues:
  - Isochronous reception stopped prematurely if an application used a
    larger buffer.  (Reproduced with coriander.)
  - Isochronous reception stopped after one or a few frames on VT630x
    in OHCI 1.0 mode.  (Fixes reception in coriander, but dvgrab still
    doesn't work with these chips.)

Patch update: struct member alignment, whitespace nits

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:24 +01:00
Stefan Richter
bb9f2206b6 firewire: fw-ohci: CycleTooLong interrupt management
The firewire-ohci driver so far lacked the ability to resume cycle
master duty after that condition happened, as added to ohci1394 in Linux
2.6.18 by commit 57fdb58fa5.  This ports
this patch to fw-ohci.

The "cycle too long" condition has been seen in practice
  - with IIDC cameras if a mode with packets too large for a speed is
    chosen,
  - sporadically when capturing DV on a VIA VT6306 card with ohci1394/
    ieee1394/ raw1394/ dvgrab 2.
    https://bugzilla.redhat.com/show_bug.cgi?id=415841#c7
(This does not fix Fedora bug 415841.)

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:24 +01:00
Rabin Vincent
478b233eda firewire: Fix extraction of source node id
Fix extraction of the source node id from the packet header.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:24 +01:00
David Moore
bcee893c6c firewire: fw-ohci: Bug fixes for packet-per-buffer support
This patch corrects a number of bugs in the current OHCI 1.0
packet-per-buffer support:

1. Correctly deal with payloads that cross a page boundary.  The
previous version would not split the descriptor at such a boundary,
potentially corrupting unrelated memory.

2. Allow user-space to specify multiple packets per struct
fw_cdev_iso_packet in the same way that dual-buffer allows.  This is
signaled by header_length being a multiple of header_size.  This
multiple determines the number of packets.  The payload size allocated
per packet is determined by dividing the total payload size by the
number of packets.

3. Make sync support work properly for packet-per-buffer.

I have tested this patch with libdc1394 by forcing my OHCI 1.1
controller to use the packet-per-buffer support instead of dual-buffer.

I would greatly appreciate testing by those who have a DV devices and
other types of iso streamers to make sure I didn't cause any
regressions.

Stefan, with this patch, I'm hoping that libdc1394 will work with all
your OHCI 1.0 controllers now.

The one bit of future work that remains for packet-per-buffer support is
the automatic compaction of short payloads that I discussed with
Kristian.

Signed-off-by: David Moore <dcm@acm.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:23 +01:00
David Moore
0642b6577f firewire: fw-ohci: Fix for dualbuffer three-or-more buffers
This patch fixes the problem where different OHCI 1.1 controllers behave
differently when a received iso packet straddles three or more buffers
when using the dual-buffer receive mode.  Two changes are made in order
to handle this situation:

1. The packet sync DMA descriptor is given a non-zero header length and
non-zero payload length.  This is because zero-payload descriptors are
not discussed in the OHCI 1.1 specs and their behavior is thus
undefined.  Instead we use a header size just large enough for a single
header and a payload length of 4 bytes for this first descriptor.

2. As we process received packets in the context's tasklet, read the
packet length out of the headers.  Keep track of the running total of
the packet length as "excess_bytes", so we can ignore any descriptors
where no packet starts or ends.  These descriptors may not have had
their first_res_count or second_res_count fields updated by the
controller so we cannot rely on those values.

The main drawback of this patch is that the excess_bytes value might get
"out of sync" with the packet descriptors if something strange happens
to the DMA program.  I'm not if such a thing could ever happen, but I
appreciate any suggestions in making it more robust.

Also, the packet-per-buffer support may need a similar fix to deal with
issue 1, but I haven't done any work on that yet.

Stefan, I'm hoping that with this patch, all your OHCI 1.1 controllers
will work properly with an unmodified version of libdc1394.

Signed-off-by: David Moore <dcm@acm.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:23 +01:00
Stefan Richter
4b11ea96a0 firewire: fw-sbp2: remove unused misleading macro
SBP2_MAX_SECTORS is nowhere used in fw-sbp2.
It merely got copied over from sbp2 where it played a role in the past.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:22 +01:00
Stefan Richter
b7811da2d9 firewire: fw-sbp2: prepare for s/g chaining
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:22 +01:00
Stefan Richter
285838eb22 firewire: fw-sbp2: refactor workq and kref handling
This somewhat reduces the size of firewire-sbp2.ko.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:21 +01:00
James Bottomley
465ff3185e [SCSI] relax scsi dma alignment
This patch relaxes the default SCSI DMA alignment from 512 bytes to 4
bytes.  I remember from previous discussions that usb and firewire have
sector size alignment requirements, so I upped their alignments in the
respective slave allocs.

The reason for doing this is so that we don't get such a huge amount of
copy overhead in bio_copy_user() for udev.  (basically all inquiries it
issues can now be directly mapped).

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:29:22 -06:00
Jarod Wilson
a186b4a6b2 firewire: OHCI 1.0 Isochronous Receive support
Third rendition of FireWire OHCI 1.0 Isochronous Receive support, using a
zer-copy method similar to OHCI 1.1 which puts the IR data payload directly
into the userspace buffer. The zero-copy implementation eliminates the
video artifacts, audio popping, and buffer underrun problems seen with
version 1 of this patch, as well as fixing a regression in OHCI 1.1 support
introduced by version 2 of this patch.

Successfully tested in OHCI 1.1 mode on the following chipsets:

- NEC uPD72847 (rev 01), OHCI 1.1 (PCI)
- Ti XIO2200(A) (rev 01), OHCI 1.1 (PCIe)
- Ti TSB41AB2 (rev 01), OHCI 1.1 (PCI on SB Audigy)
- Apple UniNorth 2 (rev 81), OHCI 1.1 (PowerBook G4 onboard)

Successfully tested in OHCI 1.0 mode on the following chipsets:

- Agere FW323 (rev 06), OHCI 1.0 (Mac Mini onboard)
- Agere FW323 (rev 06), OHCI 1.0 (PCI)
- Via VT6306 (rev 46), OHCI 1.0 (PCI)
- NEC OrangeLink (rev 01), OHCI 1.0 (PCI)
- NEC uPD72847 (rev 01), OHCI 1.1 (PCI)
- Ti XIO2200(A) (rev 01), OHCI 1.1 (PCIe)

The bulk of testing was done in an x86_64 system, but was also successfully
sanity-tested on other systems, including a PPC(32) PowerBook G4 and an i686
EPIA M10k. Crude benchmarking (watching top during capture) puts the cpu
utilization during capture on the EPIA's 1GHz Via C3 processor around 13%,
which is down from 30% with the v1 code.

Some implementation details:

To maintain the same userspace API as dual-buffer mode, we set up two
descriptors for every incoming packet. The first is an INPUT_MORE descriptor,
pointing to a buffer large enough to hold just the packet's iso headers,
immediately followed by an INPUT_LAST descriptor, pointing to a chunk of the
userspace buffer big enough for the packet's data payload. With this setup,
each incoming packet fills in these two descriptors in a manner that very
closely emulates dual-buffer receive, to the point where the bulk of the
handle_ir_* code is now identical between the two (and probably primed for
some restructuring to share code between them).

The only caveat I have at the moment is that neither of my OHCI 1.0 Via
VT6307-based FireWire controllers work particularly well with this code
for reasons I have yet to figure out.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-12-10 21:55:19 +01:00
Stefan Richter
7c45d1913f firewire: fw-sbp2: fix refcounting
Since patch "fw-sbp2: use an own workqueue (fix system responsiveness)"
increased parallelism between fw-sbp2 and fw-core, it was possible that
fw-sbp2 didn't release the SCSI device when the FireWire device was
disconnected.

This happened if sbp2_update() ran during sbp2_login(), because a bus
reset occurred during sbp2_login().  The sbp2_login() work would [try
to] reschedule itself because it failed due to the bus reset, and it
would _not_ drop its reference on the target.  However, sbp2_update()
would schedule sbp2_login() too before sbp2_login() rescheduled itself
and hence sbp2_update() would take an additional reference.  And then
we would have one reference too many.

The fix is to _always_ drop the reference when leaving the sbp2_login()
work.  If the sbp2_login() work reschedules itself, it takes a
reference, but only if it wasn't already rescheduled by sbp2_update().

Ditto in the sbp2_reconnect() work.

The resulting code is actually simpler than before:  We _always_ take
a reference when successfully scheduling work.  And we _always_ drop
a reference when leaving a workqueue job.  No exceptions.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-11-07 01:59:28 +01:00
Kristian Høgsberg
0bd243c4d9 firewire: Fix pci resume to not pass in a __be32 config rom.
The ohci_enable() function shared between pci_probe and pci_resume
takes a host endian config rom, but ohci->config_rom is __be32.  This
sets up the config rom in the wrong endian on little endian machine,
specifically, BusOptions will be initialized to a 0 max receive size.

This patch changes the way we reuse the config rom so that we avoid
this problem.

Signed-off-by: Kristian Hoegsberg <krh@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-31 19:02:19 +01:00
Stefan Richter
4b6d51ec62 firewire: fw-ohci: shut up a superfluous compiler warning
New warning since commit ab88ca488b,
"firewire: fw-ohci: missing dma_unmap_single":
drivers/firewire/fw-ohci.c: In function 'at_context_transmit':
drivers/firewire/fw-ohci.c:609: warning: 'payload_bus' may be used
 uninitialized in this function

Access to payload_bus is conditional on packet->payload_length > 0,
and that won't change while in at_context_queue_packet.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-22 19:48:56 +02:00
Stefan Richter
c74e92c209 firewire: fw-ohci: log a note about unsupported features
because there seems to be more time needed to implement this.
Also, change related error return values to more appropriate ones.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-22 19:48:55 +02:00
Uwe Kleine-König
dbe7f76dd6 fix typo "insted" -> "instead"
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 01:55:04 +02:00
Jay Fenlason
83431cba3d firewire: fw-cdev: reorder wakeup vs. spinlock
Signed-off-by: Jay Fenlason <fenlason@redhat.com>

Prompted by https://bugzilla.redhat.com/show_bug.cgi?id=323411

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17 00:00:10 +02:00
Yann Dirson
c1b91ce491 firewire: in-code doc updates.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (update)
2007-10-17 00:00:09 +02:00
Stefan Richter
e5f84f82bd firewire: a header cleanup
fw_node() is not used (and not useful) outside fw-topology.c.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17 00:00:09 +02:00
Stefan Richter
a64408b96b firewire: adopt read cycle timer ABI from raw1394
This duplicates the read cycle timer feature of raw1394 (added in Linux
2.6.21) in firewire-core's userspace ABI.  The argument to the ioctl is
reordered though to ensure 32/64 bit compatibility.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-10-17 00:00:08 +02:00
Stefan Richter
02ff8f8ee1 firewire: fw-ohci: check for misconfigured bus (phyID == 63)
Check NodeID.nodeNumber as per OHCI 1.1 clause 7.2.3.2.  See also IEEE
1394a table 5B-1.

Also, demote the "node ID not valid" message from error to notification
as it is not an error condition.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17 00:00:08 +02:00
Stefan Richter
ab88ca488b firewire: fw-ohci: missing dma_unmap_single
at_context_queue_packet() didn't clean up in an early exit path.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-10-17 00:00:07 +02:00
Stefan Richter
e524f616f5 firewire: fw-ohci: log posted write errors
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17 00:00:06 +02:00
Stefan Richter
a7fb60db71 firewire: fw-ohci: reorder includes
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17 00:00:06 +02:00
Stefan Richter
c26f02340e firewire: fw-ohci: fix includes
Add used includes, remove unused includes.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17 00:00:05 +02:00
Stefan Richter
ee71c2f9ee firewire: fw-ohci: enforce read order for selfID generation
It seems unlikely, but access to self_id_cpu[0] could at least in theory
be deferred until after the loop over self_id_cpu[1..n] or even after
the subsequent reg_read.  Enforce the desired order by a read barrier.

Also prevent the reg_read from being reordered relative to the for loop.
This isn't necessary if the loop's conditional printk counts as an
implicit barrier, but better make it explicit.

(self_id_cpu[] is a coherent DMA buffer.)

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17 00:00:05 +02:00
Stefan Richter
df8ec2490f firewire: fw-sbp2: use an own workqueue (fix system responsiveness)
Firewire-sbp2 did very uncooperative things in the kernel's shared
workqueue:  Sleeping until reception of management status from the
target for up to 2 seconds, and performing SCSI inquiry and all of the
setup of SCSI command set drivers via scsi_add_device.  If there were
transient or permanent error conditions, this caused long blockage of
the kernel's events process, noticeable e.g. by blocked keyboard input.

We now allocate a workqueue process exclusive to fw-sbp2.  As a side
effect, this also increases parallelism of fw-sbp2's login and reconnect
work versus fw-core's device discovery and device update work which is
performed in the shared workqueue.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-10-17 00:00:04 +02:00
Stefan Richter
2df222b8f8 firewire: fw-sbp2: expose module parameter for workarounds
On rare occasions, the ability to set one of the workaround flags at
runtime may save the day.

People who experience I/O errors with firewire-sbp2 while the old sbp2
driver worked for them should try workarounds=1 and report to the devel
mailinglist whether that improves things.  Firewire-sbp2 defaults to the
SCSI stack's maximum transfer size per command, while sbp2 limits them
to 128 kBytes.  Flag 1 accomplishes just that.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17 00:00:03 +02:00
Stefan Richter
5a3c2be6c9 firewire: fw-sbp2: add support for multiple logical units per target
Fixes "New firewire stack only recognizing half of a chain of drives",
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=242254

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17 00:00:03 +02:00
Stefan Richter
1b34e97441 firewire: fw-sbp2: always enable IRQs before calling command ORB callback
On IOMMU-less noncoherent architectures, orb->callback will memcpy the
whole SCSI command buffer for READ-like SCSI commands.  It is therefore
friendlier to enable IRQs before the call, like before patch "Add
ref-counting for sbp2 orbs".

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-10-17 00:00:02 +02:00
Stefan Richter
930e4b7fe3 firewire: fw-core: local variable shadows a global one
Sparse warned about it although it was apparently harmless:

drivers/firewire/fw-cdev.c:624:23: warning: symbol 'interrupt' shadows an earlier one
include/asm/hw_irq.h:29:13: originally declared here

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17 00:00:01 +02:00
Stefan Richter
1415d9189e firewire: optimize fw_core_add_address_handler
Potentially avoids unnecessary loop runs.
Guarantee quadlet-aligned starts of address regions.
Document the return values.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17 00:00:00 +02:00
Al Viro
1ccc9147f6 fw-cdev __user annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14 12:41:51 -07:00
Kay Sievers
7eff2e7a8b Driver core: change add_uevent_var to use a struct
This changes the uevent buffer functions to use a struct instead of a
long list of parameters. It does no longer require the caller to do the
proper buffer termination and size accounting, which is currently wrong
in some places. It fixes a known bug where parts of the uevent
environment are overwritten because of wrong index calculations.

Many thanks to Mathieu Desnoyers for finding bugs and improving the
error handling.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:01 -07:00
Stefan Richter
a1134dd48d firewire: point to migration document
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-07 13:48:41 +02:00
Stefan Richter
5511142870 firewire: fw-ohci: ignore failure of pci_set_power_state (fix suspend regression)
Fixes (papers over) "Sleep problems with kernels >= 2.6.21 on powerpc",
http://lkml.org/lkml/2007/8/25/155.  The issue is that the FireWire
controller's pci_dev.current_state of iBook G3 and presumably older
PowerBooks is still in PCI_UNKNOWN instead of PCI_D0 when the firewire
driver's .suspend method is called.

Like it was suggested earlier in http://lkml.org/lkml/2006/10/24/13, we
do not fail .suspend anymore if pci_set_power_state failed.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-09-07 18:44:35 +02:00
Kristian Høgsberg
e57d2011a6 firewire: Add ref-counting for sbp2 orbs (fix command abortion)
This handles the case where we get the status write before getting the
complete_transaction callback ("status write for unknown orb").  In
this case, we just assume that the initial orb pointer transaction
succeeded and finish the orb.  To prevent the transaction callback
from touching freed memory, we ref-count the orb structures.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-25 18:00:27 +02:00
Stefan Richter
8a2d9ed321 firewire: fix unloading of fw-ohci while devices are attached
Fix panic in run_timer_softirq right after "modprobe -r firewire-ohci"
if a FireWire disk was attached and firewire-sbp2 loaded.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-25 18:00:27 +02:00
Stefan Richter
ae57988f68 firewire: fw-core: make two variables static
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-02 20:34:17 +02:00
Stefan Richter
4eaff7d630 firewire: fw-ohci: dma_free_coherent needs IRQs enabled
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-02 20:34:17 +02:00
Stefan Richter
25659f7183 firewire: fw-sbp2: set correct maximum payload (fixes CardBus adapters)
As far as I know, all CardBus FireWire 400 adapters have a maximum
payload of 1024 bytes which is less than the speed-dependent limit of
2048 bytes.  Fw-sbp2 has to take the host adapter's limit into account.

This apparently fixes Juju's incompatibility with my CardBus cards, a
NEC based card and a VIA based card.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-08-02 20:34:16 +02:00
Linus Torvalds
e6f194d8f6 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (60 commits)
  [SCSI] libsas: make ATA functions selectable by a config option
  [SCSI] bsg: unexport sg v3 helper functions
  [SCSI] bsg: fix bsg_unregister_queue
  [SCSI] bsg: make class backlinks
  [SCSI] 3w-9xxx: add support for 9690SA
  [SCSI] bsg: fix bsg_register_queue error path
  [SCSI] ESP: Increase ESP_BUS_TIMEOUT to 275.
  [SCSI] libsas: fix scr_read/write users and update the libata documentation
  [SCSI] mpt fusion: update Kconfig help
  [SCSI] scsi_transport_sas: add destructor for bsg
  [SCSI] iscsi_tcp: buggered kmalloc()
  [SCSI] qla2xxx: Update version number to 8.02.00-k2.
  [SCSI] qla2xxx: Add ISP25XX support.
  [SCSI] qla2xxx: Use pci_try_set_mwi().
  [SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces.
  [SCSI] qla2xxx: Re-factor isp_operations to static structures.
  [SCSI] qla2xxx: Validate mid-layer 'underflow' during check-condition handling.
  [SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration.
  [SCSI] qla2xxx: Generalize iIDMA support.
  [SCSI] qla2xxx: Generalize FW-Interface-2 support.
  ...
2007-07-22 11:36:49 -07:00