Commit Graph

52 Commits

Author SHA1 Message Date
Stephen Hemminger
7b332244a6 8139cp: fix VLAN unregistration
The 8139cp driver did VLAN unregistration incorrectly.
It disables VLAN completely when the first VID is unregistered. It
should instead disable VLAN when the group is unregistered by calling
cp_vlan_rx_register with a NULL grp.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-03 11:44:20 -04:00
Arnaldo Carvalho de Melo
eddc9ec53b [SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iph
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:10 -07:00
Arnaldo Carvalho de Melo
4c13eb6657 [ETH]: Make eth_type_trans set skb->dev like the other *_type_trans
One less thing for drivers writers to worry about.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:30 -07:00
Dan Aloni
5c15bdec5c [VLAN]: Avoid a 4-order allocation.
This patch splits the vlan_group struct into a multi-allocated struct. On
x86_64, the size of the original struct is a little more than 32KB, causing
a 4-order allocation, which is prune to problems caused by buddy-system
external fragmentation conditions.

I couldn't just use vmalloc() because vfree() cannot be called in the
softirq context of the RCU callback.

Signed-off-by: Dan Aloni <da-x@monatomic.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02 20:44:51 -08:00
Chris Lalancette
553af56775 8139cp: Don't blindly enable interrupts
Similar to this commit:

http://kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=d15e9c4d9a75702b30e00cdf95c71c88e3f3f51e

It's not safe in cp_start_xmit to blindly call spin_lock_irq and then
spin_unlock_irq, since it may very well be the case that cp_start_xmit
was called with interrupts already disabled (I came across this bug in
the context of netdump in RedHat kernels, but the same issue holds, for
example, in netconsole). Therefore, replace all instances of
spin_lock_irq and spin_unlock_irq with spin_lock_irqsave and
spin_unlock_irqrestore, respectively, in cp_start_xmit(). I tested this
against a fully-virtualized Xen guest using netdump, which happens to
use the 8139cp driver to talk to the emulated hardware. I don't have a
real piece of 8139cp hardware to test on, so someone else will have to
do that.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-18 11:47:22 -05:00
Francois Romieu
d15e9c4d9a netpoll: drivers must not enable IRQ unconditionally in their NAPI handler
net/core/netpoll.c::netpoll_send_skb() calls the poll handler when
it is available. As netconsole can be used from almost any context,
IRQ must not be enabled blindly in the NAPI handler of a driver which
supports netpoll.

b57bd06655 fixed the issue for the
8139too.c driver.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 16:24:11 -05:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Linus Torvalds
a319a2773a Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (217 commits)
  net/ieee80211: fix more crypto-related build breakage
  [PATCH] Spidernet: add ethtool -S (show statistics)
  [NET] GT96100: Delete bitrotting ethernet driver
  [PATCH] mv643xx_eth: restrict to 32-bit PPC_MULTIPLATFORM
  [PATCH] Cirrus Logic ep93xx ethernet driver
  r8169: the MMIO region of the 8167 stands behin BAR#1
  e1000, ixgb: Remove pointless wrappers
  [PATCH] Remove powerpc specific parts of 3c509 driver
  [PATCH] s2io: Switch to pci_get_device
  [PATCH] gt96100: move to pci_get_device API
  [PATCH] ehea: bugfix for register access functions
  [PATCH] e1000 disable device on PCI error
  drivers/net/phy/fixed: #if 0 some incomplete code
  drivers/net: const-ify ethtool_ops declarations
  [PATCH] ethtool: allow const ethtool_ops
  [PATCH] sky2: big endian
  [PATCH] sky2: fiber support
  [PATCH] sky2: tx pause bug fix
  drivers/net: Trim trailing whitespace
  [PATCH] ehea: IBM eHEA Ethernet Device Driver
  ...

Manually resolved conflicts in drivers/net/ixgb/ixgb_main.c and
drivers/net/sky2.c related to CHECKSUM_HW/CHECKSUM_PARTIAL changes by
commit 84fa7933a3 that just happened to be
next to unrelated changes in this update.
2006-09-24 10:15:13 -07:00
Patrick McHardy
84fa7933a3 [NET]: Replace CHECKSUM_HW by CHECKSUM_PARTIAL/CHECKSUM_COMPLETE
Replace CHECKSUM_HW by CHECKSUM_PARTIAL (for outgoing packets, whose
checksum still needs to be completed) and CHECKSUM_COMPLETE (for
incoming packets, device supplied full checksum).

Patch originally from Herbert Xu, updated by myself for 2.6.18-rc3.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:53 -07:00
Jeff Garzik
7282d491ec drivers/net: const-ify ethtool_ops declarations
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 14:30:00 -04:00
Jeff Garzik
cb930205c9 Merge tag '8139cp-20060912-00' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into tmp 2006-09-12 21:59:47 -04:00
Francois Romieu
48907e3989 8139cp: ring_info removal for the transmit path
As long as the descriptor fits on a single cacheline, the change
should be almost free.

Now ring_info is not used at all. Remove it.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-09-12 21:00:46 +02:00
Jeff Garzik
4e83b7fad8 Merge branch 'tmp' into upstream 2006-09-12 11:45:33 -04:00
Andy Gospodarek
d5b20697ca [PATCH] Remove more unnecessary driver printk's
As I promised last week, here is the first pass at removing all
unnecessary printk's that exist in network device drivers currently in
promiscuous mode.  The duplicate messages are not needed so they have
been removed.  Some of these drivers are quite old and might not need an
update, but I did them all anyway.

I am currently auditing the remaining conditional printk's and will send
out a patch for those soon.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-12 11:45:19 -04:00
Francois Romieu
cccb20d3a9 8139cp: use PCI_DEVICE() to shorten the PCI device table
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31 22:15:43 +02:00
François Romieu
7668a4945b 8139cp: pci_get_drvdata(pdev) can not be NULL in suspend handler
1) pci_set_drvdata() is used in cp_{init/remove}_one to initialize/reset
   driver_data to the relevant value (resp. net_device * and NULL).

2) each of the 3 relevant functions is issued under (device *)->sem:
   2.1) pci_unregister_driver
        -> driver_unregister
           -> bus_remove_driver
              -> driver_detach (takes (device *)->sem)
                 -> __device_release_driver(dev)
                    -> dev->bus-remove(dev) (== pci_device_remove)
                       -> drv->remove(pdev) (== cp_remove_one)
                       [...]
                       pci_dev->driver = NULL;

   2.2) pci_register_driver
        -> __pci_register_driver
           -> driver_register
              -> bus_add_driver
                 -> driver_attach
                    -> __driver_attach (takes (device *)->sem)
                       -> driver_probe_device(drv, dev)
                          -> dev->bus->probe(dev) (== pci_device_probe)
                             -> _pci_device_probe(drv, pci_dev)
                                -> pci_call_probe(drv, pci_dev, id)
                                   -> drv->probe(dev, id) (== cp_init_one)
                                [...]
                                pci_dev->driver = drv;

   2.3) suspend_device (takes (device *)->sem)
        -> dev->bus->suspend(dev) (== pci_device_suspend)
           checking for drv = pci_dev->driver != NULL
           [...]
           -> drv->suspend(pci_dev, state) (== cp_suspend)

dev->sem and the state of pci_dev->driver provide the expected result.

St Mary's day was a bit rainy here.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31 22:15:42 +02:00
Francois Romieu
e68970e754 8139cp: removal of useless BUG_ON() check
netdev_priv() will provide a nice oops a few lines before
the BUG_ON() check.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31 22:15:41 +02:00
Francois Romieu
d03d376dd2 8139cp: sync the device private data with its r8169 counterpart
struct cp_private is reorganized to be more easily compared between the
r8169 and the 8139cp drivers.

The alignment should not be impacted.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31 22:15:41 +02:00
Francois Romieu
0ba894d420 8139cp: ring_info removal for the receive path
The ring_info.len field is not used at all. cp_private.rx_skb is
turned into an array of sk_buff *.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31 22:15:40 +02:00
Francois Romieu
c48e9399e8 8139cp: remove gratuitous indirection
dev is an argument of the current function.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31 22:15:40 +02:00
Francois Romieu
3598b57be4 8139cp: trim ring_info
Fat removal: the mapping address is available from the Rx/Tx descriptors.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31 22:15:39 +02:00
Jeff Garzik
299176206b drivers/net: Remove deprecated use of pci_module_init()
From: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:48:59 -04:00
Andrew Morton
4626dd46f5 [PATCH] 8139cp.c printk fix
drivers/net/8139cp.c: In function 'cp_init_one':
drivers/net/8139cp.c:1919: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'resource_size_t'
drivers/net/8139cp.c:1919: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t'

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-12 17:42:40 -04:00
Jeff Garzik
9b91cf9daa [netdrvr] use dev_xxx() printk helpers, rather than dev_printk(KERN_xxx, ...
Suggested by Jiri Slaby.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 13:42:57 -04:00
Jeff Garzik
2e8a538d86 [netdrvr] Use dev_printk() when ethernet interface isn't available
For messages prior to register_netdev(), prefer dev_printk() because
that prints out both our driver name and our [PCI | whatever] bus id.

Updates: 8139{cp,too}, b44, bnx2, cassini, {eepro,epic}100, fealnx,
	 hamachi, ne2k-pci, ns83820, pci-skeleton, r8169.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 13:42:07 -04:00
Thomas Gleixner
1fb9df5d30 [PATCH] irq-flags: drivers/net: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:51 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Greg Kroah-Hartman
2427ddd8fa [PATCH] 64bit Resource: convert a few remaining drivers to use resource_size_t where needed
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com>

Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27 09:24:00 -07:00
Greg Kroah-Hartman
7c7459d1f9 [PATCH] 64bit resource: fix up printks for resources in networks drivers
This is needed if we wish to change the size of the resource structures.

Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com>

Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27 09:23:58 -07:00
Herbert Xu
7967168cef [NET]: Merge TSO/UFO fields in sk_buff
Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not
going to scale if we add any more segmentation methods (e.g., DCCP).  So
let's merge them.

They were used to tell the protocol of a packet.  This function has been
subsumed by the new gso_type field.  This is essentially a set of netdev
feature bits (shifted by 16 bits) that are required to process a specific
skb.  As such it's easy to tell whether a given device can process a GSO
skb: you just have to and the gso_type field and the netdev's features
field.

I've made gso_type a conjunction.  The idea is that you have a base type
(e.g., SKB_GSO_TCPV4) that can be modified further to support new features.
For example, if we add a hardware TSO type that supports ECN, they would
declare NETIF_F_TSO | NETIF_F_TSO_ECN.  All TSO packets with CWR set would
have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO
packets would be SKB_GSO_TCPV4.  This means that only the CWR packets need
to be emulated in software.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 02:07:29 -07:00
Philip Craig
722fdb3359 [PATCH] 8139cp: add ethtool eeprom support
Implement the ethtool eeprom operations for the 8139cp driver.
Tested on x86 and big-endian ARM.

Signed-off-by: Philip Craig <philipc@snapgear.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 23:20:29 -04:00
Philip Craig
d73f1e3c3b [PATCH] 8139cp: fix eeprom read command length
The read command for the 93C46/93C56 EEPROMS should be 3 bits plus
the address.  This doesn't appear to affect the operation of the
read command, but similar errors for write commands do cause failures.

Signed-off-by: Philip Craig <philipc@snapgear.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 23:20:29 -04:00
Jeff Garzik
f3b197ac26 [netdrvr] trim trailing whitespace: 8139*.c, epic100, forcedeth, tulip/* 2006-05-26 21:39:03 -04:00
Eric Sesterhenn
5d9428de1a BUG_ON() Conversion in drivers/net/
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-02 13:52:48 +02:00
Arjan van de Ven
f71e130966 Massive net driver const-ification. 2006-03-03 21:33:57 -05:00
Francois Romieu
576cfa934e 8139cp: fix broken suspend/resume
- check that the device is up before it is enabled again;
- the descriptor ring indexes must be set to zero before
  cp_init_hw() is issued. Add a nice comment to remember
  that skb allocation failure is still not handled.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=5681

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-02-27 23:15:06 +01:00
Jeff Garzik
a3536c839f Merge /spare/repo/linux-2.6/ 2005-09-21 22:34:08 -04:00
Stephen Hemminger
8b51292764 [PATCH] 8139cp: allocate statistics space only when needed
Don't crash if ethtool statistics are requested and device is down.
Fix is to allocate pci space for statistics only when needed.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-16 02:51:31 -04:00
Nishanth Aravamudan
3173c8907f [PATCH] drivers/net: fix-up schedule_timeout() usage
Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14 08:33:24 -04:00
John W. Linville
bb0ce608a3 [PATCH] 8139cp: support ETHTOOL_GPERMADDR
Add support for ETHTOOL_GPERMADDR to 8139cp.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14 08:29:31 -04:00
Pierre Ossman
a4cf076149 [PATCH] 8139cp - redetect link after suspend
After suspend the driver needs to retest link status in case the cable
has been inserted or removed during the suspend.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-18 16:59:14 -04:00
David S. Miller
689be43945 [NET]: Remove gratuitous use of skb->tail in network drivers.
Many drivers use skb->tail unnecessarily.

In these situations, the code roughly looks like:

	dev = dev_alloc_skb(...);

	[optional] skb_reserve(skb, ...);

	... skb->tail ...

But even if the skb_reserve() happens, skb->data equals
skb->tail.  So it doesn't make any sense to use anything
other than skb->data in these cases.

Another case was the s2io.c driver directly mucking with
the skb->data and skb->tail pointers.  It really just wanted
to do an skb_reserve(), so that's what the code was changed
to do instead.

Another reason I'm making this change as it allows some SKB
cleanups I have planned simpler to merge.  In those cleanups,
skb->head, skb->tail, and skb->end pointers are removed, and
replaced with skb->head_room and skb->tail_room integers.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
2005-06-28 15:25:31 -07:00
Stephen Hemminger
97f568d8e3 8139cp: safer spin loop for get_statistics
The spin loop in 8139cp is limited to 100 iterations when pulling hardware
stats. There is no allowance for processor speed so on a fast machine, the
stats may not be available that fast. Also, if the board doesn't return
soon enough make sure turn the address back off to prevent later updates
when memory has gone away.
2005-06-26 18:02:44 -04:00
Jeff Garzik
8b0ee07e10 Merge upstream (approx. 2.6.12-git8) into 'janitor' branch of netdev-2.6. 2005-06-26 17:11:03 -04:00
Tobias Klauser
8662d06171 [PATCH] drivers/net/8139cp: Use the DMA_{64, 32}BIT_MASK constants
The previous patch did not compile cleanly on all architectures so
  here's a fixed one.
  
  Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling
  pci_set_dma_mask() or pci_set_consistent_dma_mask()
  
  Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
  Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-05-12 22:19:39 -04:00
a78d892796 [PATCH] 8139cp net driver: add MODULE_VERSION 2005-05-12 19:35:42 -04:00
Steffen Klassert
7502cd1058 [PATCH] 8139cp - add netpoll support
Patch adds netpoll support to the 8139cp driver.
  The patch needs some tests because I have no NIC of this type for testing.
  
  Applies against linux-2.6.9-rc2-mm3
  
  Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
2005-05-12 19:34:31 -04:00
Stephen Hemminger
e21ba28262 [PATCH] 8139cp - module_param
Not sure if I sent this already...
  Convert 8139cp to use new module_param() not old MODULE_PARM
  
  Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2005-05-12 19:33:26 -04:00
Francois Romieu
5734418d4f [PATCH] 8139cp: SG support fixes
- suspicious length in pci_unmap_single;
  - wait for the last frag before freeing the relevant skb;
  - no need to crash when facing some unexpected csum combination.
2005-05-12 19:31:31 -04:00
Jeff Garzik
fcec345658 [netdrvr 8139cp] TSO support 2005-05-12 19:28:49 -04:00