Commit Graph

170 Commits

Author SHA1 Message Date
Jens Axboe
1aa2a7cc6f block: switch sync_dirty_buffer() over to WRITE_SYNC
We should now have the logic in place to handle this properly
without regressing on the write performance, so re-enable
the sync writes.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 08:04:54 -07:00
Jens Axboe
9cf6b720f8 block: fsync_buffers_list() should use SWRITE_SYNC_PLUG
Then it can submit all the buffers without unplugging for each one.
We will kick off the pending IO if we come across a new address space.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 08:04:53 -07:00
Linus Torvalds
20bec8ab14 Merge branch 'ext3-latency-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'ext3-latency-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext3: Add replace-on-rename hueristics for data=writeback mode
  ext3: Add replace-on-truncate hueristics for data=writeback mode
  ext3: Use WRITE_SYNC for commits which are caused by fsync()
  block_write_full_page: Use synchronous writes for WBC_SYNC_ALL writebacks
2009-04-03 11:10:33 -07:00
Linus Torvalds
8fe74cf053 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Remove two unneeded exports and make two symbols static in fs/mpage.c
  Cleanup after commit 585d3bc06f
  Trim includes of fdtable.h
  Don't crap into descriptor table in binfmt_som
  Trim includes in binfmt_elf
  Don't mess with descriptor table in load_elf_binary()
  Get rid of indirect include of fs_struct.h
  New helper - current_umask()
  check_unsafe_exec() doesn't care about signal handlers sharing
  New locking/refcounting for fs_struct
  Take fs_struct handling to new file (fs/fs_struct.c)
  Get rid of bumping fs_struct refcount in pivot_root(2)
  Kill unsharing fs_struct in __set_personality()
2009-04-02 21:09:10 -07:00
Nikanth Karthikesan
97f76d3d19 vfs: check bh->b_blocknr only if BH_Mapped is set
Check bh->b_blocknr only if BH_Mapped is set.

akpm: I doubt if b_blocknr is ever uninitialised here, but it could
conceivably cause a problem if we're doing a lookup for block zero.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:49 -07:00
Eric Sandeen
c2d7543851 filesystem freeze: allow SysRq emergency thaw to thaw frozen filesystems
Now that the filesystem freeze operation has been elevated to the VFS, and
is just an ioctl away, some sort of safety net for unintentionally frozen
root filesystems may be in order.

The timeout thaw originally proposed did not get merged, but perhaps
something like this would be useful in emergencies.

For example, freeze /path/to/mountpoint may freeze your root filesystem if
you forgot that you had that unmounted.

I chose 'j' as the last remaining character other than 'h' which is sort
of reserved for help (because help is generated on any unknown character).

I've tested this on a non-root fs with multiple (nested) freezers, as well
as on a system rendered unresponsive due to a frozen root fs.

[randy.dunlap@oracle.com: emergency thaw only if CONFIG_BLOCK enabled]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:17 -07:00
KAMEZAWA Hiroyuki
327c0e9686 vmscan: fix it to take care of nodemask
try_to_free_pages() is used for the direct reclaim of up to
SWAP_CLUSTER_MAX pages when watermarks are low.  The caller to
alloc_pages_nodemask() can specify a nodemask of nodes that are allowed to
be used but this is not passed to try_to_free_pages().  This can lead to
unnecessary reclaim of pages that are unusable by the caller and int the
worst case lead to allocation failure as progress was not been make where
it is needed.

This patch passes the nodemask used for alloc_pages_nodemask() to
try_to_free_pages().

Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:15 -07:00
Nick Piggin
56a76f8275 fs: fix page_mkwrite error cases in core code and btrfs
page_mkwrite is called with neither the page lock nor the ptl held.  This
means a page can be concurrently truncated or invalidated out from
underneath it.  Callers are supposed to prevent truncate races themselves,
however previously the only thing they can do in case they hit one is to
raise a SIGBUS.  A sigbus is wrong for the case that the page has been
invalidated or truncated within i_size (eg.  hole punched).  Callers may
also have to perform memory allocations in this path, where again, SIGBUS
would be wrong.

The previous patch ("mm: page_mkwrite change prototype to match fault")
made it possible to properly specify errors.  Convert the generic buffer.c
code and btrfs to return sane error values (in the case of page removed
from pagecache, VM_FAULT_NOPAGE will cause the fault handler to exit
without doing anything, and the fault will be retried properly).

This fixes core code, and converts btrfs as a template/example.  All other
filesystems defining their own page_mkwrite should be fixed in a similar
manner.

Acked-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:14 -07:00
Nick Piggin
c2ec175c39 mm: page_mkwrite change prototype to match fault
Change the page_mkwrite prototype to take a struct vm_fault, and return
VM_FAULT_xxx flags.  There should be no functional change.

This makes it possible to return much more detailed error information to
the VM (and also can provide more information eg.  virtual_address to the
driver, which might be important in some special cases).

This is required for a subsequent fix.  And will also make it easier to
merge page_mkwrite() with fault() in future.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:14 -07:00
Edward Shishkin
e3a7cca1ef vfs: add/use account_page_dirtied()
Add a helper function account_page_dirtied().  Use that from two
callsites.  reiser4 adds a function which adds a third callsite.

Signed-off-by: Edward Shishkin<edward.shishkin@gmail.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:12 -07:00
Al Viro
47e4491b40 Cleanup after commit 585d3bc06f
fsync_bdev() export and a bunch of stubs for !CONFIG_BLOCK case had
been left behind

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-04-01 07:07:16 -04:00
Theodore Ts'o
a64c8610bd block_write_full_page: Use synchronous writes for WBC_SYNC_ALL writebacks
When doing synchronous writes because wbc->sync_mode is set to
WBC_SYNC_ALL, send the write request using WRITE_SYNC, so that we
don't unduly block system calls such as fsync().

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Jan Kara <jack@suse.cz>
2009-03-27 22:14:10 -04:00
Nick Piggin
585d3bc06f fs: move bdev code out of buffer.c
Move some block device related code out from buffer.c and put it in
block_dev.c. I'm trying to move non-buffer_head code out of buffer.c

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-27 14:44:03 -04:00
Linus Torvalds
a8e7d49aa7 Fix race in create_empty_buffers() vs __set_page_dirty_buffers()
Nick Piggin noticed this (very unlikely) race between setting a page
dirty and creating the buffers for it - we need to hold the mapping
private_lock until we've set the page dirty bit in order to make sure
that create_empty_buffers() might not build up a set of buffers without
the dirty bits set when the page is dirty.

I doubt anybody has ever hit this race (and it didn't solve the issue
Nick was looking at), but as Nick says: "Still, it does appear to solve
a real race, which we should close."

Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-19 11:32:05 -07:00
Linus Torvalds
ba95fd47d1 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: fix deadlock in blk_abort_queue() for drivers that readd to timeout list
  block: fix booting from partitioned md array
  block: revert part of 18ce3751cc
  cciss: PCI power management reset for kexec
  paride/pg.c: xs(): &&/|| confusion
  fs/bio: bio_alloc_bioset: pass right object ptr to mempool_free
  block: fix bad definition of BIO_RW_SYNC
  bsg: Fix sense buffer bug in SG_IO
2009-02-18 18:33:04 -08:00
Nick Piggin
1cf6e7d83b mm: task dirty accounting fix
YAMAMOTO-san noticed that task_dirty_inc doesn't seem to be called properly for
cases where set_page_dirty is not used to dirty a page (eg. mark_buffer_dirty).

Additionally, there is some inconsistency about when task_dirty_inc is
called.  It is used for dirty balancing, however it even gets called for
__set_page_dirty_no_writeback.

So rather than increment it in a set_page_dirty wrapper, move it down to
exactly where the dirty page accounting stats are incremented.

Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 15:37:54 -08:00
Jens Axboe
78f707bfc7 block: revert part of 18ce3751cc
The above commit added WRITE_SYNC and switched various places to using
that for committing writes that will be waited upon immediately after
submission. However, this causes a performance regression with AS and CFQ
for ext3 at least, since sync_dirty_buffer() will submit some writes with
WRITE_SYNC while ext3 has sumitted others dependent writes without the sync
flag set. This causes excessive anticipation/idling in the IO scheduler
because sync and async writes get interleaved, causing a big performance
regression for the below test case (which is meant to simulate sqlite
like behaviour).

---- test case ----

int main(int argc, char **argv)
{

	int fdes, i;
	FILE *fp;
	struct timeval start;
	struct timeval end;
	struct timeval res;

	gettimeofday(&start, NULL);
	for (i=0; i<ROWS; i++) {
		fp = fopen("test_file", "a");
		fprintf(fp, "Some Text Data\n");
		fdes = fileno(fp);
		fsync(fdes);
		fclose(fp);
	}
	gettimeofday(&end, NULL);

	timersub(&end, &start, &res);
	fprintf(stdout, "time to write %d lines is %ld(msec)\n", ROWS,
			(res.tv_sec*1000000 + res.tv_usec)/1000);

	return 0;
}

-------------------

Thanks to Sean.White@APCC.com for tracking down this performance
regression and providing a test case.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-02-18 10:32:01 +01:00
Dave Kleikamp
d4cf109f05 vfs: Don't call attach_nobh_buffers() with an empty list
This is a modification of a patch by Bill Pemberton <wfp5p@virginia.edu>

nobh_write_end() could call attach_nobh_buffers() with head == NULL.
This would result in a trap when attach_nobh_buffers() attempted to
access bh->b_this_page.

This can be illustrated by running the writev01 testcase from LTP on jfs.

This error was introduced by commit 5b41e74a "vfs: fix data leak in
nobh_write_end()".  That patch did not take into account that if
PageMappedToDisk() is true upon entry to nobh_write_begin(), then no
buffers will be allocated for the page.  In that case, we won't have to
worry about a failed write leaving unitialized data in the page.

Of course, head != NULL implies !page_has_buffers(page), so no need to
test both.

Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Dmitri Monakhov <dmonakhov@openvz.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-06 13:34:22 -08:00
Heiko Carstens
bdc480e3be [CVE-2009-0029] System call wrappers part 10
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:22 +01:00
Takashi Sato
fcccf50254 filesystem freeze: implement generic freeze feature
The ioctls for the generic freeze feature are below.
o Freeze the filesystem
  int ioctl(int fd, int FIFREEZE, arg)
    fd: The file descriptor of the mountpoint
    FIFREEZE: request code for the freeze
    arg: Ignored
    Return value: 0 if the operation succeeds. Otherwise, -1

o Unfreeze the filesystem
  int ioctl(int fd, int FITHAW, arg)
    fd: The file descriptor of the mountpoint
    FITHAW: request code for unfreeze
    arg: Ignored
    Return value: 0 if the operation succeeds. Otherwise, -1
    Error number: If the filesystem has already been unfrozen,
                  errno is set to EINVAL.

[akpm@linux-foundation.org: fix CONFIG_BLOCK=n]
Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 16:54:42 -08:00
Takashi Sato
c4be0c1dc4 filesystem freeze: add error handling of write_super_lockfs/unlockfs
Currently, ext3 in mainline Linux doesn't have the freeze feature which
suspends write requests.  So, we cannot take a backup which keeps the
filesystem's consistency with the storage device's features (snapshot and
replication) while it is mounted.

In many case, a commercial filesystem (e.g.  VxFS) has the freeze feature
and it would be used to get the consistent backup.

If Linux's standard filesystem ext3 has the freeze feature, we can do it
without a commercial filesystem.

So I have implemented the ioctls of the freeze feature.
I think we can take the consistent backup with the following steps.
1. Freeze the filesystem with the freeze ioctl.
2. Separate the replication volume or create the snapshot
   with the storage device's feature.
3. Unfreeze the filesystem with the unfreeze ioctl.
4. Take the backup from the separated replication volume
   or the snapshot.

This patch:

VFS:
Changed the type of write_super_lockfs and unlockfs from "void"
to "int" so that they can return an error.
Rename write_super_lockfs and unlockfs of the super block operation
freeze_fs and unfreeze_fs to avoid a confusion.

ext3, ext4, xfs, gfs2, jfs:
Changed the type of write_super_lockfs and unlockfs from "void"
to "int" so that write_super_lockfs returns an error if needed,
and unlockfs always returns 0.

reiserfs:
Changed the type of write_super_lockfs and unlockfs from "void"
to "int" so that they always return 0 (success) to keep a current behavior.

Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 16:54:42 -08:00
Franck Bui-Huu
69e9930993 block_write_begin(): remove useless goto
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:08 -08:00
Nick Piggin
54566b2c15 fs: symlink write_begin allocation context fix
With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened.  They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim.  This bug could
cause filesystem deadlocks.

The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called.  It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock.  The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.

Add a new flag for write_begin, AOP_FLAG_NOFS.  Filesystems can now act on
this flag in their write_begin function.  Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).

This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg.  ocfs2_alloc_write_ctxt, for a
random example).

[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org>		[2.6.28.x]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
  untouched to the grab_cache_page_write_begin() function.  That
  just simplifies everybody, and may even allow future expansion of the
  logic.   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04 13:33:20 -08:00
Keith Mannthey
08bafc0341 block: Supress Buffer I/O errors when SCSI REQ_QUIET flag set
Allow the scsi request REQ_QUIET flag to be propagated to the buffer
file system layer. The basic ideas is to pass the flag from the scsi
request to the bio (block IO) and then to the buffer layer.  The buffer
layer can then suppress needless printks.

This patch declutters the kernel log by removed the 40-50 (per lun)
buffer io error messages seen during a boot in my multipath setup . It
is a good chance any real errors will be missed in the "noise" it the
logs without this patch.

During boot I see blocks of messages like
"
__ratelimit: 211 callbacks suppressed
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242847
Buffer I/O error on device sdm, logical block 1
Buffer I/O error on device sdm, logical block 5242878
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242872
"
in my logs.

My disk environment is multipath fiber channel using the SCSI_DH_RDAC
code and multipathd.  This topology includes an "active" and "ghost"
path for each lun. IO's to the "ghost" path will never complete and the
SCSI layer, via the scsi device handler rdac code, quick returns the IOs
to theses paths and sets the REQ_QUIET scsi flag to suppress the scsi
layer messages.

 I am wanting to extend the QUIET behavior to include the buffer file
system layer to deal with these errors as well. I have been running this
patch for a while now on several boxes without issue.  A few runs of
bonnie++ show no noticeable difference in performance in my setup.

Thanks for John Stultz for the quiet_error finalization.

Submitted-by:  Keith Mannthey <kmannth@us.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:44 +01:00
Jan Kara
52b19ac993 udf: Fix BUG_ON() in destroy_inode()
udf_clear_inode() can leave behind buffers on mapping's i_private list (when
we truncated preallocation). Call invalidate_inode_buffers() so that the list
is properly cleaned-up before we return from udf_clear_inode(). This is ugly
and suggest that we should cleanup preallocation earlier than in clear_inode()
but currently there's no such call available since drop_inode() is called under
inode lock and thus is unusable for disk operations.

Signed-off-by: Jan Kara <jack@suse.cz>
2008-11-27 17:38:28 +01:00
Nick Piggin
51b07fc3c5 fs: buffer lock use lock bitops
trylock_buffer and unlock_buffer open and close a critical section.
Hence, we can use the lock bitops to get the desired memory ordering.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:32 -07:00
Jens Axboe
48fd4f93a0 block: submit_bh() inadvertently discards barrier flag on a sync write
Reported by Milan Broz <mbroz@redhat.com>, commit 18ce3751 inadvertently
made submit_bh() discard the barrier bit for a WRITE_SYNC request. Fix
that up.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-08-27 09:50:19 +02:00
Nick Piggin
ca5de404ff fs: rename buffer trylock
Like the page lock change, this also requires name change, so convert the
raw test_and_set bitop to a trylock.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-04 21:56:09 -07:00
Thomas Petazzoni
dbacefc9c4 fs/buffer.c: uninline __remove_assoc_queue()
Uninline the __remove_assoc_queue() function in fs/buffer.c, called at too
many places and too long to really be inlined.  Size results:

   text	   data	    bss	    dec	    hex	filename
1134606	 118840	 212992	1466438	 166046	vmlinux.old
1134303	 118840	 212992	1466135	 165f17	vmlinux
   -303       0       0    -303    -12F +/-

This patch is part of the Linux Tiny project and has been originally
written by Matt Mackall <mpm@selenic.com>.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30 09:41:46 -07:00
Hisashi Hifumi
8ab22b9abb vfs: pagecache usage optimization for pagesize!=blocksize
When we read some part of a file through pagecache, if there is a
pagecache of corresponding index but this page is not uptodate, read IO
is issued and this page will be uptodate.

I think this is good for pagesize == blocksize environment but there is
room for improvement on pagesize != blocksize environment.  Because in
this case a page can have multiple buffers and even if a page is not
uptodate, some buffers can be uptodate.

So I suggest that when all buffers which correspond to a part of a file
that we want to read are uptodate, use this pagecache and copy data from
this pagecache to user buffer even if a page is not uptodate.  This can
reduce read IO and improve system throughput.

I wrote a benchmark program and got result number with this program.

This benchmark do:

  1: mount and open a test file.

  2: create a 512MB file.

  3: close a file and umount.

  4: mount and again open a test file.

  5: pwrite randomly 300000 times on a test file.  offset is aligned
     by IO size(1024bytes).

  6: measure time of preading randomly 100000 times on a test file.

The result was:
	2.6.26
        330 sec

	2.6.26-patched
        226 sec

Arch:i386
Filesystem:ext3
Blocksize:1024 bytes
Memory: 1GB

On ext3/4, a file is written through buffer/block.  So random read/write
mixed workloads or random read after random write workloads are optimized
with this patch under pagesize != blocksize environment.  This test result
showed this.

The benchmark program is as follows:

#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <time.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mount.h>

#define LEN 1024
#define LOOP 1024*512 /* 512MB */

main(void)
{
	unsigned long i, offset, filesize;
	int fd;
	char buf[LEN];
	time_t t1, t2;

	if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
		perror("cannot mount\n");
		exit(1);
	}
	memset(buf, 0, LEN);
	fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC);
	if (fd < 0) {
		perror("cannot open file\n");
		exit(1);
	}
	for (i = 0; i < LOOP; i++)
		write(fd, buf, LEN);
	close(fd);
	if (umount("/root/test1/") < 0) {
		perror("cannot umount\n");
		exit(1);
	}
	if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
		perror("cannot mount\n");
		exit(1);
	}
	fd = open("/root/test1/testfile", O_RDWR);
	if (fd < 0) {
		perror("cannot open file\n");
		exit(1);
	}

	filesize = LEN * LOOP;
	for (i = 0; i < 300000; i++){
		offset = (random() % filesize) & (~(LEN - 1));
		pwrite(fd, buf, LEN, offset);
	}
	printf("start test\n");
	time(&t1);
	for (i = 0; i < 100000; i++){
		offset = (random() % filesize) & (~(LEN - 1));
		pread(fd, buf, LEN, offset);
	}
	time(&t2);
	printf("%ld sec\n", t2-t1);
	close(fd);
	if (umount("/root/test1/") < 0) {
		perror("cannot umount\n");
		exit(1);
	}
}

Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jan Kara <jack@ucw.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 16:30:21 -07:00
Arjan van de Ven
5c752ad9f3 Use WARN() in fs/
Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:07 -07:00
Alexey Dobriyan
51cc50685a SL*B: drop kmem cache argument from constructor
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres.  Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.

Non-trivial places are:
	arch/powerpc/mm/init_64.c
	arch/powerpc/mm/hugetlbpage.c

This is flag day, yes.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:07 -07:00
Nick Piggin
19fd623127 mm: spinlock tree_lock
mapping->tree_lock has no read lockers.  convert the lock from an rwlock
to a spinlock.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:06 -07:00
Ingo Molnar
1a781a777b Merge branch 'generic-ipi' into generic-ipi-for-linus
Conflicts:

	arch/powerpc/Kconfig
	arch/s390/kernel/time.c
	arch/x86/kernel/apic_32.c
	arch/x86/kernel/cpu/perfctr-watchdog.c
	arch/x86/kernel/i8259_64.c
	arch/x86/kernel/ldt.c
	arch/x86/kernel/nmi_64.c
	arch/x86/kernel/smpboot.c
	arch/x86/xen/smp.c
	include/asm-x86/hw_irq_32.h
	include/asm-x86/hw_irq_64.h
	include/asm-x86/mach-default/irq_vectors.h
	include/asm-x86/mach-voyager/irq_vectors.h
	include/asm-x86/smp.h
	kernel/Makefile

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15 21:55:59 +02:00
Alex Tomas
29a814d2ee vfs: add hooks for ext4's delayed allocation support
Export mpage_bio_submit() and __mpage_writepage() for the benefit of
ext4's delayed allocation support.   Also change __block_write_full_page
so that if buffers that have the BH_Delay flag set it will call
get_block() to get the physical block allocated, just as in the
!BH_Mapped case.

Signed-off-by: Alex Tomas <alex@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Jan Kara
c7d206b337 vfs: Move mark_inode_dirty() from under page lock in generic_write_end()
There's no need to call mark_inode_dirty() under page lock in
generic_write_end(). It unnecessarily makes hold time of page lock longer
and more importantly it forces locking order of page lock and transaction
start for journaling filesystems.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Jens Axboe
18ce3751cc Properly notify block layer of sync writes
fsync_buffers_list() and sync_dirty_buffer() both issue async writes and
then immediately wait on them. Conceptually, that makes them sync writes
and we should treat them as such so that the IO schedulers can handle
them appropriately.

This patch fixes a write starvation issue that Lin Ming reported, where
xx is stuck for more than 2 minutes because of a large number of
synchronous IO in the system:

INFO: task kjournald:20558 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
kjournald     D ffff810010820978  6712 20558      2
ffff81022ddb1d10 0000000000000046 ffff81022e7baa10 ffffffff803ba6f2
ffff81022ecd0000 ffff8101e6dc9160 ffff81022ecd0348 000000008048b6cb
0000000000000086 ffff81022c4e8d30 0000000000000000 ffffffff80247537
Call Trace:
[<ffffffff803ba6f2>] kobject_get+0x12/0x17
[<ffffffff80247537>] getnstimeofday+0x2f/0x83
[<ffffffff8029c1ac>] sync_buffer+0x0/0x3f
[<ffffffff8066d195>] io_schedule+0x5d/0x9f
[<ffffffff8029c1e7>] sync_buffer+0x3b/0x3f
[<ffffffff8066d3f0>] __wait_on_bit+0x40/0x6f
[<ffffffff8029c1ac>] sync_buffer+0x0/0x3f
[<ffffffff8066d48b>] out_of_line_wait_on_bit+0x6c/0x78
[<ffffffff80243909>] wake_bit_function+0x0/0x23
[<ffffffff8029e3ad>] sync_dirty_buffer+0x98/0xcb
[<ffffffff8030056b>] journal_commit_transaction+0x97d/0xcb6
[<ffffffff8023a676>] lock_timer_base+0x26/0x4b
[<ffffffff8030300a>] kjournald+0xc1/0x1fb
[<ffffffff802438db>] autoremove_wake_function+0x0/0x2e
[<ffffffff80302f49>] kjournald+0x0/0x1fb
[<ffffffff802437bb>] kthread+0x47/0x74
[<ffffffff8022de51>] schedule_tail+0x28/0x5d
[<ffffffff8020cac8>] child_rip+0xa/0x12
[<ffffffff80243774>] kthread+0x0/0x74
[<ffffffff8020cabe>] child_rip+0x0/0x12

Lin Ming confirms that this patch fixes the issue. I've run tests with
it for the past week and no ill effects have been observed, so I'm
proposing it for inclusion into 2.6.26.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-07-01 09:07:34 +02:00
Jens Axboe
15c8b6c1aa on_each_cpu(): kill unused 'retry' parameter
It's not even passed on to smp_call_function() anymore, since that
was removed. So kill it.

Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-06-26 11:24:38 +02:00
Harvey Harrison
8e24eea728 fs: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:54 -07:00
Adrian Bunk
f1e3af72c1 make fs/buffer.c:cont_expand_zero() static
cont_expand_zero() can become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:01 -07:00
Adrian Bunk
946a57b526 remove generic_commit_write()
Remove the obsolete and no longer used generic_commit_write().

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:01 -07:00
OGAWA Hirofumi
061e97469f Add balance_dirty_pages_ratelimited() to cont_expand_zero()
On the systems, ftruncate() which expand size for FAT became the cause
of OOM.  The cont_expand_zero() filled all memory with dirty pages,
and since disk is very slow, limit of page scanning was exceeded, then
it triggered OOM.

This adds balance_dirty_pages_ratelimited() to avoid filling memory
with dirty pages.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:47 -07:00
Mel Gorman
19770b3260 mm: filter based on a nodemask as well as a gfp_mask
The MPOL_BIND policy creates a zonelist that is used for allocations
controlled by that mempolicy.  As the per-node zonelist is already being
filtered based on a zone id, this patch adds a version of __alloc_pages() that
takes a nodemask for further filtering.  This eliminates the need for
MPOL_BIND to create a custom zonelist.

A positive benefit of this is that allocations using MPOL_BIND now use the
local node's distance-ordered zonelist instead of a custom node-id-ordered
zonelist.  I.e., pages will be allocated from the closest allowed node with
available memory.

[Lee.Schermerhorn@hp.com: Mempolicy: update stale documentation and comments]
[Lee.Schermerhorn@hp.com: Mempolicy: make dequeue_huge_page_vma() obey MPOL_BIND nodemask]
[Lee.Schermerhorn@hp.com: Mempolicy: make dequeue_huge_page_vma() obey MPOL_BIND nodemask rework]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:19 -07:00
Mel Gorman
dd1a239f6f mm: have zonelist contains structs with both a zone pointer and zone_idx
Filtering zonelists requires very frequent use of zone_idx().  This is costly
as it involves a lookup of another structure and a substraction operation.  As
the zone_idx is often required, it should be quickly accessible.  The node idx
could also be stored here if it was found that accessing zone->node is
significant which may be the case on workloads where nodemasks are heavily
used.

This patch introduces a struct zoneref to store a zone pointer and a zone
index.  The zonelist then consists of an array of these struct zonerefs which
are looked up as necessary.  Helpers are given for accessing the zone index as
well as the node index.

[kamezawa.hiroyu@jp.fujitsu.com: Suggested struct zoneref instead of embedding information in pointers]
[hugh@veritas.com: mm-have-zonelist: fix memcg ooms]
[hugh@veritas.com: just return do_try_to_free_pages]
[hugh@veritas.com: do_try_to_free_pages gfp_mask redundant]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Christoph Lameter <clameter@sgi.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:18 -07:00
Mel Gorman
54a6eb5c47 mm: use two zonelist that are filtered by GFP mask
Currently a node has two sets of zonelists, one for each zone type in the
system and a second set for GFP_THISNODE allocations.  Based on the zones
allowed by a gfp mask, one of these zonelists is selected.  All of these
zonelists consume memory and occupy cache lines.

This patch replaces the multiple zonelists per-node with two zonelists.  The
first contains all populated zones in the system, ordered by distance, for
fallback allocations when the target/preferred node has no free pages.  The
second contains all populated zones in the node suitable for GFP_THISNODE
allocations.

An iterator macro is introduced called for_each_zone_zonelist() that interates
through each zone allowed by the GFP flags in the selected zonelist.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:18 -07:00
Mel Gorman
0e88460da6 mm: introduce node_zonelist() for accessing the zonelist for a GFP mask
Introduce a node_zonelist() helper function.  It is used to lookup the
appropriate zonelist given a node and a GFP mask.  The patch on its own is a
cleanup but it helps clarify parts of the two-zonelist-per-node patchset.  If
necessary, it can be merged with the next patch in this set without problems.

Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:18 -07:00
Mel Gorman
dac1d27bc8 mm: use zonelists instead of zones when direct reclaiming pages
The following patches replace multiple zonelists per node with two zonelists
that are filtered based on the GFP flags.  The patches as a set fix a bug with
regard to the use of MPOL_BIND and ZONE_MOVABLE.  With this patchset, the
MPOL_BIND will apply to the two highest zones when the highest zone is
ZONE_MOVABLE.  This should be considered as an alternative fix for the
MPOL_BIND+ZONE_MOVABLE in 2.6.23 to the previously discussed hack that filters
only custom zonelists.

The first patch cleans up an inconsistency where direct reclaim uses
zonelist->zones where other places use zonelist.

The second patch introduces a helper function node_zonelist() for looking up
the appropriate zonelist for a GFP mask which simplifies patches later in the
set.

The third patch defines/remembers the "preferred zone" for numa statistics, as
it is no longer always the first zone in a zonelist.

The forth patch replaces multiple zonelists with two zonelists that are
filtered.  The two zonelists are due to the fact that the memoryless patchset
introduces a second set of zonelists for __GFP_THISNODE.

The fifth patch introduces helper macros for retrieving the zone and node
indices of entries in a zonelist.

The final patch introduces filtering of the zonelists based on a nodemask.
Two zonelists exist per node, one for normal allocations and one for
__GFP_THISNODE.

Performance results varied depending on the machine configuration.  In real
workloads the gain/loss will depend on how much the userspace portion of the
benchmark benefits from having more cache available due to reduced referencing
of zonelists.

These are the range of performance losses/gains when running against
2.6.24-rc4-mm1.  The set and these machines are a mix of i386, x86_64 and
ppc64 both NUMA and non-NUMA.
			     loss   to  gain
Total CPU time on Kernbench: -0.86% to  1.13%
Elapsed   time on Kernbench: -0.79% to  0.76%
page_test from aim9:         -4.37% to  0.79%
brk_test  from aim9:         -0.71% to  4.07%
fork_test from aim9:         -1.84% to  4.60%
exec_test from aim9:         -0.71% to  1.08%

This patch:

The allocator deals with zonelists which indicate the order in which zones
should be targeted for an allocation.  Similarly, direct reclaim of pages
iterates over an array of zones.  For consistency, this patch converts direct
reclaim to use a zonelist.  No functionality is changed by this patch.  This
simplifies zonelist iterators in the next patch.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:18 -07:00
Christoph Lameter
488514d179 Remove set_migrateflags()
Migrate flags must be set on slab creation as agreed upon when the antifrag
logic was reviewed.  Otherwise some slabs of a slabcache will end up in the
unmovable and others in the reclaimable section depending on which flag was
active when a new slab page was allocated.

This likely slid in somehow when antifrag was merged. Remove it.

The buffer_heads are always allocated with __GFP_RECLAIMABLE because the
SLAB_RECLAIM_ACCOUNT option is set.  The set_migrateflags() never had any
effect there.

Radix tree allocations are not directly reclaimable but they are allocated
with __GFP_RECLAIMABLE set on each allocation.  We now set
SLAB_RECLAIM_ACCOUNT on radix tree slab creation making sure that radix
tree slabs are consistently placed in the reclaimable section.  Radix tree
slabs will also be accounted as such.

There is then no user left of set_migratepages. So remove it.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:17 -07:00
Linus Torvalds
1be62dc190 Be more careful about marking buffers dirty
Mikulas Patocka noted that the optimization where we check if a buffer
was already dirty (and we avoid re-dirtying it) was not really SMP-safe.

Since the read of the old status was not synchronized with anything, an
aggressive CPU re-ordering of memory accesses might have moved that read
up to before the data was even written to the buffer, and another CPU
that cleaned it again, causing the newly dirty state to never actually
hit the disk.

Admittedly this would probably never trigger in practice, but it's still
wrong.

Mikulas sent a patch that fixed the problem, but I dislike the subtlety
of the whole optimization, so this is an alternate fix that is more
explicit about the particular SMP ordering for the optimization, and
separates out the speculative reads of the buffer state into its own
conditional (and makes the memory barrier only happen if we are likely
to actually hit the optimized case in the first place).

I considered removing the optimization entirely, but Andrew argued for
it's continued existence. I'm a push-over.

Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-04 14:38:17 -07:00
Dmitri Monakhov
5b41e74ad1 vfs: fix data leak in nobh_write_end()
Current nobh_write_end() implementation ignore partial writes(copied < len)
case if page was fully mapped and simply mark page as Uptodate, which is
totally wrong because area [pos+copied, pos+len) wasn't updated explicitly in
previous write_begin call.  It simply contains garbage from pagecache and
result in data leakage.

#TEST_CASE_BEGIN:
~~~~~~~~~~~~~~~~
In fact issue triggered by classical testcase
	open("/mnt/test", O_RDWR|O_CREAT|O_TRUNC, 0666) = 3
	ftruncate(3, 409600)                    = 0
	writev(3, [{"a", 1}, {NULL, 4095}], 2)  = 1
##TESTCASE_SOURCE:
~~~~~~~~~~~~~~~~~
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <sys/uio.h>
#include <sys/mman.h>
#include <errno.h>
int main(int argc, char **argv)
{
	int fd,  ret;
	void* p;
	struct iovec iov[2];
	fd = open(argv[1], O_RDWR|O_CREAT|O_TRUNC, 0666);
	ftruncate(fd, 409600);
	iov[0].iov_base="a";
	iov[0].iov_len=1;
	iov[1].iov_base=NULL;
	iov[1].iov_len=4096;
	ret = writev(fd, iov, sizeof(iov)/sizeof(struct iovec));
	printf("writev  = %d, err = %d\n", ret, errno);
	return 0;
}
##TESTCASE RESULT:
~~~~~~~~~~~~~~~~~~
[root@ts63 ~]# mount | grep mnt2
/dev/mapper/test on /mnt2 type ext2 (rw,nobh)
[root@ts63 ~]#  /tmp/writev /mnt2/test
writev  = 1, err = 0
[root@ts63 ~]# hexdump -C /mnt2/test

00000000  61 65 62 6f 6f 74 00 00  f0 b9 b4 59 3a 00 00 00  |aeboot.....Y:...|
00000010  20 00 00 00 00 00 00 00  21 00 00 00 00 00 00 00  | .......!.......|
00000020  df df df df df df df df  df df df df df df df df  |................|
00000030  3a 00 00 00 2a 00 00 00  21 00 00 00 00 00 00 00  |:...*...!.......|
00000040  60 c0 8c 00 00 00 00 00  40 4a 8d 00 00 00 00 00  |`.......@J......|
00000050  00 00 00 00 00 00 00 00  41 00 00 00 00 00 00 00  |........A.......|
00000060  74 69 6d 65 20 64 64 20  69 66 3d 2f 64 65 76 2f  |time dd if=/dev/|
00000070  6c 6f 6f 70 30 20 20 6f  66 3d 2f 64 65 76 2f 6e  |loop0  of=/dev/n|
skip..
00000f50  00 00 00 00 00 00 00 00  31 00 00 00 00 00 00 00  |........1.......|
00000f60  6d 6b 66 73 2e 65 78 74  33 20 2f 64 65 76 2f 76  |mkfs.ext3 /dev/v|
00000f70  7a 76 67 2f 74 65 73 74  20 2d 62 34 30 39 36 00  |zvg/test -b4096.|
00000f80  a0 fe 8c 00 00 00 00 00  21 00 00 00 00 00 00 00  |........!.......|
00000f90  23 31 32 30 35 39 35 30  34 30 34 00 3a 00 00 00  |#1205950404.:...|
00000fa0  20 00 8d 00 00 00 00 00  21 00 00 00 00 00 00 00  | .......!.......|
00000fb0  d0 cf 8c 00 00 00 00 00  10 d0 8c 00 00 00 00 00  |................|
00000fc0  00 00 00 00 00 00 00 00  41 00 00 00 00 00 00 00  |........A.......|
00000fd0  6d 6f 75 6e 74 20 2f 64  65 76 2f 76 7a 76 67 2f  |mount /dev/vzvg/|
00000fe0  74 65 73 74 20 20 2f 76  7a 20 2d 6f 20 64 61 74  |test  /vz -o dat|
00000ff0  61 3d 77 72 69 74 65 62  61 63 6b 00 00 00 00 00  |a=writeback.....|
00001000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

As you can see file's page contains garbage from pagecache instead of zeros.
#TEST_CASE_END

Attached patch:
- Add sanity check BUG_ON in order to prevent incorrect usage by caller,
  This is function invariant because page can has buffers and in no zero
  *fadata pointer at the same time.
- Always attach buffers to page is it is partial write case.
- Always switch back to generic_write_end if page has buffers.
  This is reasonable because if page already has buffer then generic_write_begin
  was called previously.

Signed-off-by: Dmitri Monakhov <dmonakhov@openvz.org>
Reviewed-by: Nick Piggin <npiggin@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:45:21 -07:00