Commit Graph

147 Commits

Author SHA1 Message Date
Linus Torvalds
117494a1b6 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (142 commits)
  USB: fix race in autosuspend reschedule
  atmel_usba_udc: Keep track of the device status
  USB: Nikon D40X unusual_devs entry
  USB: serial core should respect driver requirements
  USB: documentation for USB power management
  USB: skip autosuspended devices during system resume
  USB: mutual exclusion for EHCI init and port resets
  USB: allow usbstorage to have LUNS greater than 2Tb
  USB: Adding support for SHARP WS011SH to ipaq.c
  USB: add atmel_usba_udc driver
  USB: ohci SSB bus glue
  USB: ehci build fixes on au1xxx, ppc-soc
  USB: add runtime frame_no quirk for big-endian OHCI
  USB: funsoft: Fix termios
  USB: visor: termios bits
  USB: unusual_devs entry for Nikon DSC D2Xs
  USB: re-remove <linux/usb_sl811.h>
  USB: move <linux/usb_gadget.h> to <linux/usb/gadget.h>
  USB: Export URB statistics for powertop
  USB: serial gadget: Disable endpoints on unload
  ...
2007-10-12 15:49:10 -07:00
Linus Torvalds
4d5709a7b7 Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Don't take semaphore in cpufreq_quick_get()
  [CPUFREQ] Support different families in fid/did to frequency conversion
  [CPUFREQ] cpufreq_stats: misc cpuinit section annotations
  [CPUFREQ] implement !CONFIG_CPU_FREQ stub for  cpufreq_unregister_notifier()
  [CPUFREQ] mark hotplug notifier callback as __cpuinit
  [CPUFREQ] Only check for transition latency on problematic governors (kconfig fix)
  [CPUFREQ] allow ondemand and conservative cpufreq governors to be used as default
  [CPUFREQ] move policy's governor initialisation out of low-level drivers into cpufreq core
  [CPUFREQ] Longhaul - Add support for PM133 northbridge
  [CPUFREQ] x86: use num_online_nodes to get physical cpus numbers for
2007-10-12 15:42:01 -07:00
David Brownell
27f5d75afa USB: re-remove <linux/usb_sl811.h>
Remove <linux/usb_sl811.h> ... somehow this was recreated when
the Blackfin arch was merged, instead of using <linux/usb/sl811.h>
which is the correct header.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:55:31 -07:00
Thomas Renninger
8122c6cea0 [CPUFREQ] move policy's governor initialisation out of low-level drivers into cpufreq core
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Jones <davej@redhat.com>
2007-10-04 18:40:57 -04:00
Michael Hennerich
cda6a20b68 Blackfin arch: fix PORT_J BUG for BF537/6 EMAC driver reported by Kalle Pokki <kalle.pokki@iki.fi>
Cc: Kalle Pokki <kalle.pokki@iki.fi>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-04 00:36:18 +08:00
Michael Hennerich
c58c2140f0 Blackfin arch: gpio pinmux and resource allocation API required by BF537 on chip ethernet mac driver
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-04 00:35:05 +08:00
Bryan Wu
0b95f22bd3 Blackfin arch: add some missing syscall
When compiling the Blackfin kernel, checksyscalls.pl will report lots of missing syscalls warnings.
This patch will add some missing syscalls which make sense on Blackfin arch

After appling this patch, toolchain should be rebuilt. Then recompiling the kernel with the new
toolchain.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-09-23 00:51:32 +08:00
Michael Hennerich
4bbd10fd31 Blackfin arch: Update/Fix PM support add new pm_ops valid
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27 17:29:10 +08:00
Bryan Wu
d31c5ab147 Blackfin arch: after removing fs.h from mm.h, fix the broken on Blackfin arch
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 15:47:39 -07:00
Robin Getz
7417c8fe2e Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT and DEBUG_KERNEL_START
Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT didn't work that well, and
DEBUG_KERNEL_START was just implmented poorly. Will replace with a new
checkin.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10 22:26:33 +08:00
Mike Frysinger
ddf416b2bc Blackfin arch: fix typo in register name
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10 18:06:47 +08:00
Bernd Schmidt
bc41bb1165 Blackfin arch: fix bug libstdc++ calling writev with an iovec containing { NULL, 0 } fails on Blackfin
Fix a problem reported in the forums - libstdc++ can call writev with an
iovec containing { NULL, 0 }, which works fine on i686-linux, but fails on
Blackfin.  Fixed by allowing size 0 transfers to/from userspace regardless
of the address.

Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10 17:54:19 +08:00
Bernd Schmidt
ef4a47db52 Blackfin arch: Export strcpy - occasionally get module link failures otherwise
Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10 17:45:22 +08:00
Robin Getz
b3f8b92763 Blackfin arch: the load address is not safe to point to as a workaround for ANOMALY 05000281
Now that we have moved head.S into the init section, the load
address is not safe to point to as a workaround for ANOMALY 05000281

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10 17:28:27 +08:00
Robin Getz
b76f98761a Blackfin arch: show_mem can not be marked as init, since it is called during OOM condition
show_mem can not be marked as init, since it is called during
OOM condition from /mm/oom_kill.c:out_of_memory() and
/mm/page_alloc.c:__alloc_pages()

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10 17:25:15 +08:00
Michael Hennerich
1a7d91d651 Blackfin arch: flush/inv the correct range when using write back cache and fix bugs find by dmacopy
- flush/inv the correct range
 - dmacopy test failed when policy is write_back - invalidate before dma
   http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3367
   It's the cache invalidate what is causing the issue.
   There is no invalidate only instruction it's always: FLUSHINV
   So when we "invalidate" after the DMA we might (do) overwrite freshly 
   dma'ed data by dirty Cache WB content.

   Fixed by moving the "invalidate" at the beginning of dma_memcpy.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10 17:42:55 +08:00
Michael Hennerich
2b39331a28 Blackfin arch: Comply with revised Anomaly Workarounds for BF533 05000311 and BF561 05000323
Comply with revised Anomaly Workarounds for BF533 05000311 and BF561 05000323
accoring to BF533 anomaly sheet Rev. A 09/04/07

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10 16:58:49 +08:00
Robin Getz
337d390b3a Blackfin arch: Print out debug info, as early as possible
Print out debug info, as early as possible - even before the
kernel initializes the interrupt vectors. Now we can print out debug
messages almost anytime during the boot process.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09 17:31:46 +08:00
Robin Getz
ce3afa1c04 Blackfin arch: Enable earlyprintk earlier - so any error after our interrupt tables are set up will print out
Also ensure that the traps_c code doesn't cause a double fault, by
sending a signal to a faulting kernel before the memory subsystem
is fully initialized, by printing out the error message before sending
the signal.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09 17:28:36 +08:00
Robin Getz
2ebcade590 Blackfin arch: fix endless loop bug when a double fault happens
Today when a double fault happens (exception during an exception
handling event), we go into an endless loop, with nothing comming out
the UART. With this patch, we actually see that we have commited a
double fault event

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09 17:24:30 +08:00
Robin Getz
0ae53640b5 Blackfin arch: Initial patch to add earlyprintk support
This allows debugging of problems which happen eary in the kernel
boot process (after bootargs are parsed, but before serial subsystem
is fully initialized)

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09 17:24:49 +08:00
Bryan Wu
b7b2d344e7 Blackfin arch: modify the insX/outsX and dma_insX/dma_outsX to be compatible with other archs
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09 15:09:49 +08:00
Mike Frysinger
c11b5776bf Blackfin arch: add more common defines for output sections
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11 00:12:41 +08:00
Bryan Wu
fb282a72f1 Blackfin arch: cleanup IO and DMA_IO API function definitions according to other arches
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-09-12 17:48:25 +08:00
Mike Frysinger
b5c0e2e806 Blackfin arch: fix typo pointed out by David Rowe (Mhz -> MHz)
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-09-12 17:31:59 +08:00
Michael Hennerich
2714d9a6d1 Blackfin arch: Workaround reboot bug, issue SSYNC at the start of bfin_reset
reboot failes on BF533
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3500

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11 00:29:49 +08:00
Michael Hennerich
eabb5a5e0b Blackfin arch: Remove legacy support
Now that there is a generic GPIO driver framework
remove GPIO register unified name space legacy support.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-28 14:57:05 +08:00
Michael Hennerich
2acde90230 Blackfin arch: a few things still use bfin_read_PORT_FER()
- Update gpio_request to allow multiple request with the same signature (label)
 - Use generic GPIO API where applicable
 - Update generic board support form stamp board

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11 00:24:40 +08:00
Robin Getz
02f13f9d5c Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT didn't work that well with DEBUG_KERNEL_START
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27 17:38:40 +08:00
Michael Hennerich
d2b11a468a Blackfin arch: Merge GPIO/Peripheral Resource Allocation back into a single file
Signed-off-by: Michael Hennerich <michale.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-28 16:47:46 +08:00
Michael Hennerich
4d5f4ed3fb Blackfin arch: extract gpio number from PIN function
Singed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27 16:46:17 +08:00
Mike Frysinger
168f1212c0 Blackfin arch: rewrite our reboot code in C
rewrite our reboot code in C rather than assembly to be like
other architectures and to allow board maintainers to define
custom behavior

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11 00:22:35 +08:00
Mike Frysinger
27d875f2c1 Blackfin arch: vmlinux.lds.S, break up our .init into separate sections
Break up our .init into separate section like all other ports do and
so that we dont mix text and data (causes disassembly headaches as
pointed out by Robin)

Cc: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27 16:08:53 +08:00
Bryan Wu
d8350e704e Blackfin arch: Board defconfig updating
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11 00:03:39 +08:00
Mike Frysinger
fbeb7370b6 Blackfin arch: parse input sections properly when using -ffunction-sections/-fdata-sections
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27 15:02:20 +08:00
Mike Frysinger
1ffe6646ba Blackfin arch: add an exception request/free api
add an exception request/free api similar to the interrupt request/fre
api so people can utilize the free software based exceptions for their
own purposes

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05 17:14:04 +08:00
Mike Frysinger
f0b5d12f2b Blackfin arch: allow people to select the feature that is unavailable to the kernel
- allow people to select the feature that is unavailable to the kernel: NMI, JTAG, or CYCLES.
 - change default NMI handler to simply dump hardware trace buffer.
 - remove default NMI handler completely as calling into kernel code is not safe
   move example handler to wiki so people dont haphazardly copy and paste this stuff thinking its safe

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05 17:03:59 +08:00
Jie Zhang
2615639758 Blackfin arch: Allow ptrace access the fixed code.
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05 16:25:23 +08:00
Sonic Zhang
8a26ac7043 Blackfin arch: Add DMA API to set curr descriptor address
This API is necessary for DMA descriptor array mode.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05 16:14:58 +08:00
Mike Frysinger
2d8f161fe3 Blackfin arch: update BOOT_LOAD
update BOOT_LOAD help to reflect current state of the first 4k of
our address space as well as add a memory range option to prevent
invalid values

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05 14:06:16 +08:00
Mike Frysinger
b4055d733d Blackfin arch: remove spurious KERN_EMERG log level in output
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05 14:00:11 +08:00
Robin Getz
3bebca2d20 Blackfin arch: to do some consolidation of common code and common name spaces
now all BLKFIN should be BFIN, should be no functional changes.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10 23:55:26 +08:00
Mike Frysinger
a298049180 Blackfin arch: remove unused code -- EVT0 is not controllable by software
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-03 18:29:15 +08:00
Michael Hennerich
a924db7c00 Blackfin arch: Add option to priorize DMA over Core
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-03 17:43:29 +08:00
Michael Hennerich
7735cefc45 Blackfin arch: Add support for the M25P16 SPI FLash
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05 18:55:30 +08:00
Roy Huang
1d945e2b3e Blackfin arch: add set_dma_curr_addr DMA API to support sound driver recording function
Signed-off-by: Roy Huang <roy.huang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10 23:31:19 +08:00
Robin Getz
518039bc24 Blackfin arch: Add ability to expend the hardware trace buffer
Add ability to expend the hardware trace buffer via a configurable
software buffer - so you can have lots of history when a crash occurs.

The interesting way we do printk in the traps.c confusese the checking
script

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25 11:03:28 +08:00
Robin Getz
f16295e7e7 Blackfin arch: Fix CCLK and SCLK checks
Fix CCLK and SCLK checks, combine all arch checks into one file
for maintance. Checkins that remove more lines than they add are always
good.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-03 18:07:17 +08:00
Michael Hennerich
8c61362377 Blackfin arch: Some cosmetics based on LKML feedback from Joe Perches
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-03 17:48:09 +08:00
Michael Hennerich
314c98d589 Blackfin arch: add missing gpio error handling to make sure we roll back requests in case one fails
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-24 18:03:45 +08:00