Commit Graph

992 Commits

Author SHA1 Message Date
Tejun Heo
e190222d04 libata: bump transfer chunk size if it's odd
None of the drives I have follows what the standard says about
transfer chunk size.  Of the four SATA and six PATA ATAPI devices
tested, four ignore transfer chunk size completely and the ones which
honor it don't behave according to the spec when it's odd.

According to the spec, transfer chunk size can be odd if the amount of
data to transfer equals or is smaller than the chunk size and the
device can indicate the same odd number and transfer the whole thing
at one go with a pad byte appended.  However, in reality, none of the
drives I have does that.  They all indicate and transfer even number
of bytes one byte shorter than the chunk size first; then indicate and
transfer two bytes, which is clearly out of spec.

In addition to unnecessary second PIO data phase, this also creates a
weird problem when combined with SATA controllers which perform PIO
via DMA.  Some of these controllers use actualy number of bytes
received to update DMA pointer so chunks which are sized 4n + 2 makes
DMA pointer off by two bytes.  This causes data corruption and buffer
overruns.

This patch rounds nbytes up to the nearest even number such that ATAPI
devices don't split data transfer for the last odd byte.  This
shouldn't confuse controllers which depend on transfer chunk size as
devices will report the rounded-up number, actually transfer that much
and padding buffer is there to receive them.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-26 11:03:40 -05:00
sonic zhang
dc86f6d418 libata: Return proper ATA INT status in pata_bf54x driver
INT status can be OR.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-26 11:03:40 -05:00
Jeff Garzik
2541d0ca7e pata_ali: trim trailing whitespace (fix checkpatch complaints)
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-11-23 21:08:42 -05:00
Alan Cox
91e33d3109 pata_isapnp: Polled devices
If a card has no IRQ then pass no interrupt handler but allow polled
usage.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:33:27 -05:00
Alan Cox
22d5c760c8 pata_hpt37x: Fix cable detect bug spotted by Sergei
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:33:27 -05:00
Alan Cox
498222f323 pata_ali: Lots of problems still showing up with small ATAPI DMA
Hopefully there is a better long term solution but for now lets favour
reliability.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:33:27 -05:00
Alan Cox
8f59a13acc pata_ali: Add Mitac 8317 and derivatives
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:33:26 -05:00
Alan Cox
92c52c52e1 libata-core: List more documentation sources for reference
And next time I'll be able to find the ata tape spec easily...

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:33:26 -05:00
Alan Cox
c47a631f8b ata_piix: Invalid use of writel/readl with iomap
Should use ioread* as discussed previously

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:33:26 -05:00
Tejun Heo
93e2618e0c sata_sil24: fix sg table sizing
sil24 unnecessarily used LIBATA_MAX_PRD and ATAPI sg table was short
by one entry which might cause very obscure problems.  This patch
updates sg table sizing such that

* One full page is used for PRB + sg table.  On 4k page,
  this results in 253 sg's.

* Make ATAPI sg block properly sized.

* Make build fail if command block size doesn't equal PAGE_SIZE.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:23:55 -05:00
Tejun Heo
0706efd61e pata_jmicron: fix disabled port handling in jmicron_pre_reset()
There are two bugs in disabled port handling.

* test in PORT_PATA0 is reversed
* ->prereset should return -ENOENT for disabled ports not 0

The first bug makes the PATA channel considered disabled but the
second bug saves the day by returning 0.  The net result is that cable
is always left at ATA_CBL_UNKNOWN.  This results in false 80c
configuration and thus transfer errors.

This patch fixes both bugs.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:23:55 -05:00
Sergei Shtylyov
dd05c199cd pata_sil680: kill bogus reset code (take 2)
Since writing to two reserved bits ain't much of a housekeeping, I think it's
time we get rid of the custom error handler in this driver. ;-)

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23 19:23:55 -05:00
Tejun Heo
a0ce9aca97 ata_piix: port enable for the first SATA controller of ICH8 is 0xf not 0x3
ICH8 and 9 use two SFF controllers to show 6 SATA ports.  The first
controllre hosts the first 4 ports while the second one hosts the last
2.  The PCS register of the first controller encompasses the first
four ports or all six ports depending on configuration while PCS of
the second controller controls the last two ports.  Using 0xf for the
first controller and 0x3 for the second controller always result in
the correct configuration.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2007-11-19 13:10:04 +09:00
Thomas Rohwer
8d8ef2fb93 ata_piix: only enable the first port on apple macbook pro
ICH8M on apple macbook pro occasionally locks up completely during PCS
initialization if ports other than the first one are enabled.  Add a
separate controller ID and only enable the first port.

tj: commit description added and patch updated to fit with the
    previous controller ID update.

Signed-off-by: Thomas Rohwer <tr@tng.de>
Signed-off-by: Tejun Heo <htejun@gmail.com>
2007-11-19 12:28:11 +09:00
Tejun Heo
00242ec876 ata_piix: reorganize controller IDs
Move piix_pata_mwdma to top, rename ich9_2port_sata to ich8_2port_sata
for consistency and use automatically incremented values instead of
assigning fixed values to ease adding new controller IDs.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2007-11-19 12:28:11 +09:00
Gabriel C
1f71d0672a pata_sis.c: Add Packard Bell EasyNote K5305 to laptops
With newer kernels HDD in my old laptop is limited to UDMA 33.
With this patch I get UDMA 100 again.

Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Signed-off-by: Tejun Heo <htejun@gmail.com>
2007-11-19 12:28:11 +09:00
Mark Lord
607126c2a2 libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs
Sebastian Kemper reported that issuing CD/DVD commands under libata is
not fully compatible with ide-scsi.  In particular, the
GPCMD_SET_STREAMING was being rejected at the host level in some
instances.

The reason is that libata-scsi insists upon the cmd_len field exactly
matching the SCSI opcode being issued, whereas ide-scsi tolerates
12-byte commands contained within a 16-byte (cmd_len) CDB.

There doesn't seem to be a good reason for us to not be compatible
there, so here is a patch to fix libata-scsi to permit SCSI opcodes so
long as they fit within whatever size CDB is provided.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Tejun Heo <htejun@gmail.com>
2007-11-19 12:28:11 +09:00
Albert Lee
f442cd86c1 libata: use ATA_HORKAGE_STUCK_ERR for ATAPI tape drives
Per Mark's comments, maybe all ATAPI tape drives need ATA_HORKAGE_STUCK_ERR.
This patch applys ATA_HORKAGE_STUCK_ERR for all ATAPI tape drives.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Cc: Mark Lord <liml@rtr.ca>
Signed-off-by: Tejun Heo <htejun@gmail.com>
2007-11-19 12:28:11 +09:00
Albert Lee
2d3b8eea7f libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
After an error condition, some ATAPI tape drives set DRQ=1 together
with ERR=1 when asking the host to transfer the CDB of the next packet
command (i.e. request sense).  This patch, a revised version of
Alan/Mark's previous patch, adds ATA_HORKAGE_STUCK_ERR to workaround
the problem by ignoring the ERR bit and proceed sending the CDB.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Mark Lord <liml@rtr.ca>
Signed-off-by: Tejun Heo <htejun@gmail.com>
2007-11-19 12:28:11 +09:00
Adrian Bunk
21bef6dd2b libata: remove unused functions
This patch removes the following obsolete functions:
- libata-core.c: __sata_phy_reset()
- libata-core.c: sata_phy_reset()
- libata-eh.c: ata_qc_timeout()
- libata-eh.c: ata_eng_timeout()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Tejun Heo <htejun@gmail.com>
2007-11-19 12:28:09 +09:00
Tejun Heo
de753e5e86 ata_piix: add SATELLITE U205 to broken suspend list
Satellite U205 has alternate product name where the satellite part is
all capatalized.  Add it to the blacklist.

This is reported by Ross Patterson in kernel bugzilla bug #7780.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Ross Patterson <me@rpatterson.net>
2007-11-19 12:28:09 +09:00
Matthew Garrett
037f6bb79f libata: Don't fail device revalidation for bad _GTF methods
Experience suggests that the _GTF method may be bad. We currently fail
device revalidation in that case, which seems excessive.

Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-10 00:31:27 -05:00
Tejun Heo
32ebbc0c0d libata: port and host should be stopped before hardware resources are released
Port / host stop calls used to be made from ata_host_release() which
is called after all hardware resources acquired after host allocation
are released.  This is wrong as port and host stop routines often
access the hardware.

Add separate devres for port / host stop which is invoked right after
IRQ is released but with all other hardware resources intact.  The
devres is added iff ->host_stop and/or ->port_stop exist.

This problem has been spotted by Mark Lord.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-08 13:08:42 -05:00
Tejun Heo
1974e20161 libata: skip 0xff polling for PATA controllers
In a presentation of true workmanship, pata_ali asserts IRQ
permanantly if the TF status register is read more than once when
there's no device attached to the port.

Avoid waiting polling for !0xff if it's PATA.  It's needed only for
some rare SATA devices anyway.

This problem is reported by Luca Tettamanti in bugzilla bug 9298.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Tested-By: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-08 13:08:41 -05:00
Paul Mundt
f7fc0ceb4d libata: pata_platform: Support polling-mode configuration.
Some SH boards (old R2D-1 boards) have generally not had working CF
under libata, due to both buswidth issues (handled by Aoi Shinkai
in 43f4b8c757), and buggy interrupt
controllers. For these sorts of boards simply disabling the IRQ and
polling ends up working fine.

This conditionalizes the IRQ resource for pata_platform and lets
platforms that want to use polling mode simply omit the resource
entirely.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-08 13:08:41 -05:00
Paul Mundt
3d46b2e2fa libata: Support PIO polling-only hosts.
By default ata_host_activate() expects a valid IRQ in order to
successfully register the host. This patch enables a special case
for registering polling-only hosts that either don't have IRQs
or have buggy IRQ generation (either in terms of handling or
sensing), which otherwise work fine.

Hosts that want to use polling mode can simply set ATA_FLAG_PIO_POLLING
and pass in an invalid IRQ.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-08 13:08:41 -05:00
Mark Lord
6004bda1cc libata sata_qstor conversion to new error handling (EH).
sata_qstor conversion to new error handling (EH).

Convert sata_qstor to use the newer libata EH mechanisms.
Based on earlier work by Jeff Garzik.

Signed-off-by:  Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-08 13:08:41 -05:00
Mark Lord
904c7bad99 libata sata_qstor workaround for spurious interrupts
sata_qstor workaround for spurious interrupts.

The qstor hardware generates spurious interrupts from time to time when
switching in and out of packet mode.  These eventually result in the
IRQ being disabled, which kills other devices sharing this IRQ with us.

This workaround isn't perfect, but it's about the best we can do for
this hardware.  Spurious interrupts will still happen, but won't be
logged as such, and therefore won't cause the IRQ to be inadvertently
disabled.

Signed-off-by:  Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-08 13:08:41 -05:00
Mark Lord
12ee7d3ceb libata sata_qstor nuke idle state
sata_qstor nuke idle state.

We're really only ever in one of two hardware states:  packet, or mmio.
Get rid of unnecessary "qs_state_idle" state.

Signed-off-by:  Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-08 13:08:41 -05:00
Fernando Luis Vázquez Cao
647c595dad nv_hardreset: update dangling reference to bugzilla entry
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-08 13:08:40 -05:00
Yann Chachkoff
62320e23c3 ata_piix: add SATELLITE PRO U200 to broken suspend list
Please warmly welcome the PRO variant of Satellite U200 to the broken
suspend list.

Original patch is from Yann Chachkoff.  Patch reformatted and
forwarded by Tejun Heo.

Signed-off-by: Yann Chachkoff <yann.chachkoff@myrealbox.com>
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-08 13:08:40 -05:00
Alan Cox
6bbfd53d47 libata: handle broken cable reporting
One or two ancient drives predated the cable spec and didn't sent the
valid bits for the field. I had hoped to leave this out of libata as a
piece of historical annoyance but a recent CD drive shows the same bug so
we have to import support for it.

Same concept as Bartlomiej's changes old IDE except that as we have
centralised blacklists we can avoid keeping another private table of stuff

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-05 18:10:28 -05:00
Alan Cox
73946f9fc5 pata_hpt37x: Fix outstanding bug reports on the HPT374 and 37x cable detect
- Read frequency correctly
- Correct cable detect handling
- Fix wrong filter test

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-05 18:08:46 -05:00
Alan Cox
7f2803d026 ata_piix: Add additional PCI identifier for 40 wire short cable
Keeping the list in sync with the old IDE driver

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-05 18:08:46 -05:00
Alan Cox
36beb82390 pata_serverworks: Fix problem with some drive combinations
The driver used the channel not the device number for deciding where to
load some timing parameters. Also change so that we clear the UDMA field
as the old driver did. Not believed neccessary but does no harm.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-05 18:08:46 -05:00
Kristen Carlson Accardi
f5456b63ec libata: Don't disable dipm with SET FEATURES
LPM seems to get hung up while disabling DIPM, and after thinking
about this a bit, I don't think we really need to manually disable it
anyway.

Signed-off-by:  Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-04 22:54:21 -05:00
Jeff Garzik
f26792d5c6 [libata] Utilize new SCSI event infrastructure
An end to CD-ROM polling (if you have a device that supports AN)...
hooray!

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-11-03 22:23:02 -04:00
Tejun Heo
5270222f96 libata: don't configure downstream links faster than the upstream link
There's nothing to be gained by configuring downstream links faster
than the upstream link and such configurations cause problems on
certain PMPs.  Limit downstream link speed by the upstream link speed.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-03 08:47:27 -04:00
Tejun Heo
db64bcf387 libata: request PHY speed configuration on SControl access failure
In sata_set_spd_needed(), if SControl read failed, it returned 0 and
skipped PHY speed configuration.  However, if SControl access fails,
it's far more logical to request PHY speed configuration.  Reverse the
logic.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-03 08:47:27 -04:00
Tejun Heo
dfcc173d71 libata: consider errors not associated with commands for speed down
libata EH used to ignore errors not associated with commands when
determining whether speed down is necessary or not.  This leads to the
following problems.

* Errors not associated with commands can occur indefinitely without
  libata EH taking corrective actions.

* Upstream link errors don't trigger speed down when PMP is attached
  to it and commands issued to downstream device trigger errors on the
  upstream link.

This patch makes ata_eh_link_autopsy() consider errors not associated
with command for speed down.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-03 08:47:26 -04:00
Tejun Heo
08cf69d005 libata: more robust reset failure handling
Reset failure is a critical error.  It results in disabling the link
requiring user intervention to re-enable it.  Make reset failure
handling more robust such that libata EH doesn't give up too early.

* Temporary glitches during hardreset may lead to classification
  failure when there's no softreset available.  Retry instead of
  giving up.

* Initial softreset or follow up softreset may fail classification.
  Move classification error handling block out of followup softreset
  block such that both cases are handled and retry instead of giving
  up.  Also, on the last try, give ATA class a blind shot.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-03 08:46:54 -04:00
Tejun Heo
416dc9ed20 libata: cosmetic clean up / reorganization of ata_eh_reset()
Clean up and reorganize ata_eh_reset() to ease further changes.

* Cache ARRAY_SIZE(ata_eh_reset_timeouts) in @max_tries.
* Cache link->flags in @lflags.
* Move failure handling block to the end of the function and unnest
  both success and failure handling blocks.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-03 08:46:54 -04:00
Tejun Heo
cd955463bb libata: fix timing computation in ata_eh_reset()
As jiffies changes asynchronously, it needs to be cached if unchanging
timestamp is needed.  The code in ata_eh_reset() intended to do that
with @now but never actually did it.  Fix it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-03 08:46:54 -04:00
Tony Battersby
f8d8e5799b libata: increase 128 KB / cmd limit for ATAPI tape drives
Commands sent to ATAPI tape drives via the SCSI generic (sg) driver are
limited in the amount of data that they can transfer by the max_sectors
value.  The max_sectors value is currently calculated according to the
command set for disk drives, which doesn't apply to tape drives.  The
default max_sectors value of 256 limits ATAPI tape drive commands to
128 KB.  This patch against 2.6.24-rc1 increases the max_sectors value
for tape drives to 65535, which permits tape drive commands to transfer
just under 32 MB.

Tested with a SuperMicro PDSME motherboard, AHCI, and a Sony SDX-570V
SATA tape drive.

Note that some of the chipset drivers also set their own max_sectors
value, which may override the value set in libata-core.  I don't have
any of these chipsets to test, so I didn't go messing with them.  Also,
ATAPI devices other than tape drives may benefit from similar changes,
but I have only tape drives and disk drives to test.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-03 08:46:54 -04:00
Mikael Pettersson
03116d67e0 sata_promise: fix endianess bug in ASIC PRD bug workaround
The original workaround for the Promise ASIC PRD bug
contained an endianess bug which I failed to detect:
the adjustment of the last PRD entry's length field
applied host arithmetic to little-endian data, which
is incorrect on big-endian machines.

We have the length available in host-endian format, so
do the adjustment on host-endian data and then convert
and store it in the PRD entry's little-endian data field.

Thanks to an anonymous reviewer for detecting this bug.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-03 08:46:54 -04:00
Stephen Hemminger
48166fd9b0 libata: fix docbook
Fix docbook format in the comments.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-03 08:46:53 -04:00
Adrian Bunk
a2d6ed149c make ata_scsi_lpm_get() static
ata_scsi_lpm_get() can become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-03 08:46:29 -04:00
Stephen Rothwell
1992a5ede1 libata: suppress two warnings
drivers/ata/libata-core.c:768: warning: 'ata_lpm_enable' defined but not used
drivers/ata/libata-core.c:784: warning: 'ata_lpm_disable' defined but not used

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-03 08:46:29 -04:00
ashish kalra
aa91c72566 ata/sata_fsl: Remove ata_scsi_suspend/resume callbacks
Signed-off-by: ashish kalra <ashish.kalra@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-03 08:46:29 -04:00
ashish kalra
1f0e4175ae ata/sata_fsl: Remove sending LOG EXT command in sata_fsl_softreset()
Signed-off-by: ashish kalra <ashish.kalra@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-03 08:46:29 -04:00