Commit Graph

116 Commits

Author SHA1 Message Date
David S. Miller
0dc4610698 [SPARC64]: Do not do TLB pre-filling any more.
In order to do it correctly on UltraSPARC-III+ and later we'd
need to add some complicated code to set the TAG access extension
register before loading the TLB.

Since this optimization gives questionable gains, it's best to
just remove it for now instead of adding the fix for Ultra-III+

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 16:12:18 -07:00
David S. Miller
c5bd50a953 [SPARC64]: Simplify Spitfire D-cache page flush.
It tries to batch up the tag loads and comparisons, and
then the stores.  And this is just complicated instead
of efficient.

Also, make the symbol of the Cheetah version more grepable.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 16:06:03 -07:00
David S. Miller
80dc0d6b44 [SPARC64]: Probe D/I/E-cache config and use.
At boot time, determine the D-cache, I-cache and E-cache size and
line-size.  Use them in cache flushes when appropriate.

This change was motivated by discovering that the D-cache on
UltraSparc-IIIi and later are 64K not 32K, and the flushes done by the
Cheetah error handlers were assuming a 32K size.

There are still some pieces of code that are hard coding things and
will need to be fixed up at some point.

While we're here, fix the D-cache and I-cache parity error handlers
to run with interrupts disabled, and when the trap occurs at trap
level > 1 log the event via a counter displayed in /proc/cpuinfo.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 00:32:17 -07:00
David S. Miller
5642530651 [SPARC64]: Add CONFIG_DEBUG_PAGEALLOC support.
The trick is that we do the kernel linear mapping TLB miss starting
with an instruction sequence like this:

	ba,pt		%xcc, kvmap_load
	 xor		%g2, %g4, %g5

succeeded by an instruction sequence which performs a full page table
walk starting at swapper_pg_dir.

We first take over the trap table from the firmware.  Then, using this
constant PTE generation for the linear mapping area above, we build
the kernel page tables for the linear mapping.

After this is setup, we patch that branch above into a "nop", which
will cause TLB misses to fall through to the full page table walk.

With this, the page unmapping for CONFIG_DEBUG_PAGEALLOC is trivial.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-25 16:46:57 -07:00
David S. Miller
52f26deb7c [SPARC64]: Fix mask formation in tomatillo_wsync_handler()
"1" needs to be "1UL", this is a 64-bit mask we're creating.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-24 23:06:14 -07:00
David S. Miller
898cf0ecb7 [SPARC64]: Mark functions called by paging_init() as __init.
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-23 11:59:44 -07:00
David S. Miller
1c9ea5db00 [SPARC64]: Kill unused variable in setup_arch()
'highest_paddr' is set, but never actually used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-23 11:54:43 -07:00
David S. Miller
a8201c6106 [SPARC64]: Fix comment typo in head.S
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-22 20:31:29 -07:00
David S. Miller
bff06d5522 [SPARC64]: Rewrite bootup sequence.
Instead of all of this cpu-specific code to remap the kernel
to the correct location, use portable firmware calls to do
this instead.

What we do now is the following in position independant
assembler:

	chosen_node = prom_finddevice("/chosen");
	prom_mmu_ihandle_cache = prom_getint(chosen_node, "mmu");
	vaddr = 4MB_ALIGN(current_text_addr());
	prom_translate(vaddr, &paddr_high, &paddr_low, &mode);
	prom_boot_mapping_mode = mode;
	prom_boot_mapping_phys_high = paddr_high;
	prom_boot_mapping_phys_low = paddr_low;
	prom_map(-1, 8 * 1024 * 1024, KERNBASE, paddr_low);

and that replaces the massive amount of by-hand TLB probing and
programming we used to do here.

The new code should also handle properly the case where the kernel
is mapped at the correct address already (think: future kexec
support).

Consequently, the bulk of remap_kernel() dies as does the entirety
of arch/sparc64/prom/map.S

We try to share some strings in the PROM library with the ones used
at bootup, and while we're here mark input strings to oplib.h routines
with "const" when appropriate.

There are many more simplifications now possible.  For one thing, we
can consolidate the two copies we now have of a lot of cpu setup code
sitting in head.S and trampoline.S.

This is a significant step towards CONFIG_DEBUG_PAGEALLOC support.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-22 20:11:33 -07:00
David S. Miller
40fd3533c9 [SPARC64]: Kill readjust_prom_translations()
Testing shows that the prom_unmap() calls do absolutely
nothing.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-22 13:03:36 -07:00
David S. Miller
2bdb3cb265 [SPARC64]: Remove unnecessary paging_init() cruft.
Because we don't access the PAGE_OFFSET linear mappings
any longer before we take over the trap table from the
firmware, we don't need to load dummy mappings there
into the TLB and we don't need the bootmap_base hack
any longer either.

While we are here, check for a larger than 8MB kernel
and halt the boot with an error message.  We know that
doesn't work, so instead of failing mysteriously we
should let the user know exactly what's wrong.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-22 01:08:57 -07:00
David S. Miller
5085b4a549 [SPARC64]: Do not allocate OBP page tables using bootmem
Just allocate them physically starting from the end of
the kernel image.  This incredibly simplifies our MM
bootstrap in that we don't need any mappings in the linear
PAGE_OFFSET area working in order to bootstrap ourselves and
take over the trap table from the firmware.

Many further simplifications are possible now, and this also
sets the stage for CONFIG_DEBUG_PAGEALLOC support.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-22 00:45:41 -07:00
David S. Miller
405599bd98 [SPARC64]: Break up inherit_prom_mappings() into it's constituent parts.
This thing was just a huge monolithic mess, so chop it up.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-22 00:12:35 -07:00
David S. Miller
b206fc4c09 [SPARC64]: Do not allocate prom translations using bootmem.
Use __initdata instead.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-21 22:31:13 -07:00
David S. Miller
1ac4f5ebaa [SPARC64]: Remove ktlb.S instruction patching.
This was kind of ugly, and actually buggy.  The bug was that
we didn't handle a machine with memory starting > 4GB.  If
the 'prompmd' was allocated in physical memory > 4GB we'd
croak because the obp_iaddr_patch and obp_daddr_patch things
only supported a 32-bit physical address.

So fix this by just loading the appropriate values from two
variables in the kernel image, which is locked into the TLB
and thus accesses to them can't cause a recursive TLB miss.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-21 21:49:32 -07:00
David S. Miller
059deb693e [SPARC64]: Kill SZ_BITS define from dtlb_backend.S
This is just a replica of the existing _PAGE_SZBITS,
and thus unnecessary.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-21 19:23:48 -07:00
David S. Miller
2a7e299034 [SPARC64]: Move kernel TLB miss handling into a seperate file.
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-21 18:50:51 -07:00
David S. Miller
729b4f7de6 [SPARC64]: Verify vmalloc TLB misses more strictly.
Arrange the modules, OBP, and vmalloc areas such that a range
verification can be done quite minimally.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-20 12:18:38 -07:00
David S. Miller
6a9b490d5f [SPARC64]: Move DCACHE_ALIASING_POSSIBLE define to asm/page.h
This showed that arch/sparc64/kernel/ptrace.c was not getting
the define properly, and thus the code protected by this ifdef
was never actually compiled before.  So fix that too.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-19 20:11:57 -07:00
David S. Miller
ff171d8f66 [SPARC64]: Handle little-endian unaligned loads/stores correctly.
Because we use byte loads/stores to cons up the value
in and out of registers, we can't expect the ASI endianness
setting to take care of this for us.  So do it by hand.

This case is triggered by drivers/block/aoe/aoecmd.c in the
ataid_complete() function where it goes:

		/* word 100: number lba48 sectors */
		ssize = le64_to_cpup((__le64 *) &id[100<<1]);

This &id[100<<1] address is 4 byte, rather than 8 byte aligned,
thus triggering the unaligned exception.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-19 19:56:06 -07:00
David S. Miller
4db2ce0199 [LIB]: Consolidate _atomic_dec_and_lock()
Several implementations were essentialy a common piece of C code using
the cmpxchg() macro.  Put the implementation in one spot that everyone
can share, and convert sparc64 over to using this.

Alpha is the lone arch-specific implementation, which codes up a
special fast path for the common case in order to avoid GP reloading
which a pure C version would require.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-14 21:47:01 -07:00
Ingo Molnar
fb1c8f93d8 [PATCH] spinlock consolidation
This patch (written by me and also containing many suggestions of Arjan van
de Ven) does a major cleanup of the spinlock code.  It does the following
things:

 - consolidates and enhances the spinlock/rwlock debugging code

 - simplifies the asm/spinlock.h files

 - encapsulates the raw spinlock type and moves generic spinlock
   features (such as ->break_lock) into the generic code.

 - cleans up the spinlock code hierarchy to get rid of the spaghetti.

Most notably there's now only a single variant of the debugging code,
located in lib/spinlock_debug.c.  (previously we had one SMP debugging
variant per architecture, plus a separate generic one for UP builds)

Also, i've enhanced the rwlock debugging facility, it will now track
write-owners.  There is new spinlock-owner/CPU-tracking on SMP builds too.
All locks have lockup detection now, which will work for both soft and hard
spin/rwlock lockups.

The arch-level include files now only contain the minimally necessary
subset of the spinlock code - all the rest that can be generalized now
lives in the generic headers:

 include/asm-i386/spinlock_types.h       |   16
 include/asm-x86_64/spinlock_types.h     |   16

I have also split up the various spinlock variants into separate files,
making it easier to see which does what. The new layout is:

   SMP                         |  UP
   ----------------------------|-----------------------------------
   asm/spinlock_types_smp.h    |  linux/spinlock_types_up.h
   linux/spinlock_types.h      |  linux/spinlock_types.h
   asm/spinlock_smp.h          |  linux/spinlock_up.h
   linux/spinlock_api_smp.h    |  linux/spinlock_api_up.h
   linux/spinlock.h            |  linux/spinlock.h

/*
 * here's the role of the various spinlock/rwlock related include files:
 *
 * on SMP builds:
 *
 *  asm/spinlock_types.h: contains the raw_spinlock_t/raw_rwlock_t and the
 *                        initializers
 *
 *  linux/spinlock_types.h:
 *                        defines the generic type and initializers
 *
 *  asm/spinlock.h:       contains the __raw_spin_*()/etc. lowlevel
 *                        implementations, mostly inline assembly code
 *
 *   (also included on UP-debug builds:)
 *
 *  linux/spinlock_api_smp.h:
 *                        contains the prototypes for the _spin_*() APIs.
 *
 *  linux/spinlock.h:     builds the final spin_*() APIs.
 *
 * on UP builds:
 *
 *  linux/spinlock_type_up.h:
 *                        contains the generic, simplified UP spinlock type.
 *                        (which is an empty structure on non-debug builds)
 *
 *  linux/spinlock_types.h:
 *                        defines the generic type and initializers
 *
 *  linux/spinlock_up.h:
 *                        contains the __raw_spin_*()/etc. version of UP
 *                        builds. (which are NOPs on non-debug, non-preempt
 *                        builds)
 *
 *   (included on UP-non-debug builds:)
 *
 *  linux/spinlock_api_up.h:
 *                        builds the _spin_*() APIs.
 *
 *  linux/spinlock.h:     builds the final spin_*() APIs.
 */

All SMP and UP architectures are converted by this patch.

arm, i386, ia64, ppc, ppc64, s390/s390x, x64 was build-tested via
crosscompilers.  m32r, mips, sh, sparc, have not been tested yet, but should
be mostly fine.

From: Grant Grundler <grundler@parisc-linux.org>

  Booted and lightly tested on a500-44 (64-bit, SMP kernel, dual CPU).
  Builds 32-bit SMP kernel (not booted or tested).  I did not try to build
  non-SMP kernels.  That should be trivial to fix up later if necessary.

  I converted bit ops atomic_hash lock to raw_spinlock_t.  Doing so avoids
  some ugly nesting of linux/*.h and asm/*.h files.  Those particular locks
  are well tested and contained entirely inside arch specific code.  I do NOT
  expect any new issues to arise with them.

 If someone does ever need to use debug/metrics with them, then they will
  need to unravel this hairball between spinlocks, atomic ops, and bit ops
  that exist only because parisc has exactly one atomic instruction: LDCW
  (load and clear word).

From: "Luck, Tony" <tony.luck@intel.com>

   ia64 fix

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjanv@infradead.org>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Cc: Matthew Wilcox <willy@debian.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Mikael Pettersson <mikpe@csd.uu.se>
Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:21 -07:00
Linus Torvalds
486a153f0e Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild 2005-09-09 15:46:49 -07:00
Dipankar Sarma
b835996f62 [PATCH] files: lock-free fd look-up
With the use of RCU in files structure, the look-up of files using fds can now
be lock-free.  The lookup is protected by rcu_read_lock()/rcu_read_unlock().
This patch changes the readers to use lock-free lookup.

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Ravikiran Thirumalai <kiran_th@gmail.com>
Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:55 -07:00
Dipankar Sarma
6e72ad2c58 [PATCH] files-sparc64-fix 2
Fix sparc64 timod to use the new files_fdtable() api to get the fd table.
This is necessary for RCUification.

Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:55 -07:00
Dipankar Sarma
badf16621c [PATCH] files: break up files struct
In order for the RCU to work, the file table array, sets and their sizes must
be updated atomically.  Instead of ensuring this through too many memory
barriers, we put the arrays and their sizes in a separate structure.  This
patch takes the first step of putting the file table elements in a separate
structure fdtable that is embedded withing files_struct.  It also changes all
the users to refer to the file table using files_fdtable() macro.  Subsequent
applciation of RCU becomes easier after this.

Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:55 -07:00
Sam Ravnborg
0037c78a96 kbuild: frv,m32r,sparc64 introduce fake asm-offsets.h file
Needed to get them to build.
And a hint to avoid hardcoding to many constants in assembler.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09 22:47:53 +02:00
Linus Torvalds
7bbedd5213 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 2005-09-08 15:55:23 -07:00
David S. Miller
085ae41f66 [PATCH] Make sparc64 use setup-res.c
There were three changes necessary in order to allow
sparc64 to use setup-res.c:

1) Sparc64 roots the PCI I/O and MEM address space using
   parent resources contained in the PCI controller structure.
   I'm actually surprised no other platforms do this, especially
   ones like Alpha and PPC{,64}.  These resources get linked into the
   iomem/ioport tree when PCI controllers are probed.

   So the hierarchy looks like this:

   iomem --|
	   PCI controller 1 MEM space --|
				        device 1
					device 2
					etc.
	   PCI controller 2 MEM space --|
				        ...
   ioport --|
            PCI controller 1 IO space --|
					...
            PCI controller 2 IO space --|
					...

   You get the idea.  The drivers/pci/setup-res.c code allocates
   using plain iomem_space and ioport_space as the root, so that
   wouldn't work with the above setup.

   So I added a pcibios_select_root() that is used to handle this.
   It uses the PCI controller struct's io_space and mem_space on
   sparc64, and io{port,mem}_resource on every other platform to
   keep current behavior.

2) quirk_io_region() is buggy.  It takes in raw BUS view addresses
   and tries to use them as a PCI resource.

   pci_claim_resource() expects the resource to be fully formed when
   it gets called.  The sparc64 implementation would do the translation
   but that's absolutely wrong, because if the same resource gets
   released then re-claimed we'll adjust things twice.

   So I fixed up quirk_io_region() to do the proper pcibios_bus_to_resource()
   conversion before passing it on to pci_claim_resource().

3) I was mistakedly __init'ing the function methods the PCI controller
   drivers provide on sparc64 to implement some parts of these
   routines.  This was, of course, easy to fix.

So we end up with the following, and that nasty SPARC64 makefile
ifdef in drivers/pci/Makefile is finally zapped.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:25 -07:00
John W. Linville
064b53dbcc [PATCH] PCI: restore BAR values after D3hot->D0 for devices that need it
Some PCI devices (e.g. 3c905B, 3c556B) lose all configuration
(including BARs) when transitioning from D3hot->D0.  This leaves such
a device in an inaccessible state.  The patch below causes the BARs
to be restored when enabling such a device, so that its driver will
be able to access it.

The patch also adds pci_restore_bars as a new global symbol, and adds a
correpsonding EXPORT_SYMBOL_GPL for that.

Some firmware (e.g. Thinkpad T21) leaves devices in D3hot after a
(re)boot.  Most drivers call pci_enable_device very early, so devices
left in D3hot that lose configuration during the D3hot->D0 transition
will be inaccessible to their drivers.

Drivers could be modified to account for this, but it would
be difficult to know which drivers need modification.  This is
especially true since often many devices are covered by the same
driver.  It likely would be necessary to replicate code across dozens
of drivers.

The patch below should trigger only when transitioning from D3hot->D0
(or at boot), and only for devices that have the "no soft reset" bit
cleared in the PM control register.  I believe it is safe to include
this patch as part of the PCI infrastructure.

The cleanest implementation of pci_restore_bars was to call
pci_update_resource.  Unfortunately, that does not currently exist
for the sparc64 architecture.  The patch below includes a null
implemenation of pci_update_resource for sparc64.

Some have expressed interest in making general use of the the
pci_restore_bars function, so that has been exported to GPL licensed
modules.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:24 -07:00
David S. Miller
4d803fcdcd [SPARC64]: Inline membar()'s again.
Since GCC has to emit a call and a delay slot to the
out-of-line "membar" routines in arch/sparc64/lib/mb.S
it is much better to just do the necessary predicted
branch inline instead as:

	ba,pt	%xcc, 1f
	 membar	#whatever
1:

instead of the current:

	call	membar_foo
	 dslot

because this way GCC is not required to allocate a stack
frame if the function can be a leaf function.

This also makes this bug fix easier to backport to 2.4.x

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-08 14:37:53 -07:00
Linus Torvalds
946e91f36e Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-09-07 17:21:17 -07:00
viro@ZenIV.linux.org.uk
a08b6b7968 [PATCH] Kconfig fix (BLK_DEV_FD dependencies)
Sanitized and fixed floppy dependencies: split the messy dependencies for
BLK_DEV_FD by introducing a new symbol (ARCH_MAY_HAVE_PC_FDC), making
BLK_DEV_FD depend on that one and taking declarations of ARCH_MAY_HAVE_PC_FDC
to arch/*/Kconfig.  While we are at it, fixed several obvious cases when
BLK_DEV_FD should have been excluded (architectures lacking asm/floppy.h
are *not* going to have floppy.c compile, let alone work).

If you can come up with better name for that ("this architecture might
have working PC-compatible floppy disk controller"), you are more than
welcome - just s/ARCH_MAY_HAVE_PC_FDC/your_prefered_name/g in the patch
below...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 17:17:12 -07:00
Prasanna S Panchamukhi
83005161c8 [PATCH] kprobes-prevent-possible-race-conditions-sparc64-changes fix
This patch adds flags "ax" to .kprobe.text section.

Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:58:00 -07:00
Prasanna S Panchamukhi
05e14cb3ba [PATCH] Kprobes: prevent possible race conditions sparc64 changes
This patch contains the sparc64 architecture specific changes to prevent the
possible race conditions.

Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:58:00 -07:00
Miklos Szeredi
e922efc342 [PATCH] remove duplicated sys_open32() code from 64bit archs
64 bit architectures all implement their own compatibility sys_open(),
when in fact the difference is simply not forcing the O_LARGEFILE
flag.  So use the a common function instead.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <viro@parcelfarce.linux.theplanet.co.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:43 -07:00
john stultz
b149ee2233 [PATCH] NTP: ntp-helper functions
This patch cleans up a commonly repeated set of changes to the NTP state
variables by adding two helper inline functions:

ntp_clear(): Clears the ntp state variables

ntp_synced(): Returns 1 if the system is synced with a time server.

This was compile tested for alpha, arm, i386, x86-64, ppc64, s390, sparc,
sparc64.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:34 -07:00
David S. Miller
09bbe1043a [SPARC64]: Fix set/get MTU cases in sunos_ioctl()
Need to use compat struct sizes and compat_sys_ioctl().
Reported by Adrian Bunk via kernel bugzilla #2683

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-06 20:12:15 -07:00
David S. Miller
e5e259466f [SPARC64]: Don't include drivers/firmware/Kconfig
It's really not relevant for this platform in any
way, after all.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-05 23:34:13 -07:00
David S. Miller
a7a6cac204 [SPARC]: Kill io_remap_page_range()
It's been deprecated long enough and there are no in-tree
users any longer.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-01 21:51:26 -07:00
David S. Miller
8a36895c0d [SPARC64]: Use 'unsigned long' for port argument to I/O string ops.
This kills warnings when building drivers/ide/ide-iops.c
and puts us in-line with what other platforms do here.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-31 15:01:33 -07:00
David S. Miller
5843e37e24 [SPARC64]: Use drivers/Kconfig
And move some other stuff into drivers/sbus/char/Kconfig.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-30 21:46:19 -07:00
David S. Miller
2ef27778a2 [SPARC64]: Preserve nucleus ctx page size during TLB flushes.
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-30 20:21:34 -07:00
David S. Miller
3c2cafaf50 [SPARC64]: Do not expand CHEETAH_LOG_ERROR 3 times.
We only need to expand this thing once, saving some
text section space.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-30 15:11:52 -07:00
David S. Miller
dbd2fdf549 [SPARC64]: Kill BRANCH_IF_ANY_CHEETAH() from copy page.
Just patch the branch at boot time instead.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-30 11:26:15 -07:00
David S. Miller
d7ce78fd9a [SPARC64]: Eliminate irq_cpustat_t.
We can put the __softirq_pending mask in the cpudata,
no need for the silly NR_CPUS array in kernel/softirq.c

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 22:46:43 -07:00
David S. Miller
4f07118f65 [SPARC64]: More fully work around Spitfire Errata 51.
It appears that a memory barrier soon after a mispredicted
branch, not just in the delay slot, can cause the hang
condition of this cpu errata.

So move them out-of-line, and explicitly put them into
a "branch always, predict taken" delay slot which should
fully kill this problem.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 12:46:22 -07:00
David S. Miller
442464a500 [SPARC64]: Make debugging spinlocks usable again.
When the spinlock routines were moved out of line into
kernel/spinlock.c this made it so that the debugging
spinlocks record lock acquisition program counts in the
kernel/spinlock.c functions not in their callers.
This makes the debugging info kind of useless.

So record the correct caller's program counter and
now this feature is useful once more.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 12:46:07 -07:00
Kumar Gala
3d6364abcf [SPARC64]: remove use of asm/segment.h
Removed sparc64 architecture specific users of asm/segment.h and
asm-sparc64/segment.h itself

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 12:45:30 -07:00
David S. Miller
6c52a96e6c [SPARC64]: Revamp Spitfire error trap handling.
Current uncorrectable error handling was poor enough
that the processor could just loop taking the same
trap over and over again.  Fix things up so that we
at least get a log message and perhaps even some register
state.

In the process, much consolidation became possible,
particularly with the correctable error handler.

Prefix assembler and C function names with "spitfire"
to indicate that these are for Ultra-I/II/IIi/IIe only.

More work is needed to make these routines robust and
featureful to the level of the Ultra-III error handlers.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 12:45:11 -07:00