Commit Graph

1137 Commits

Author SHA1 Message Date
Tobias Klauser
56b146d36d [PATCH] Last DMA_xBIT_MASK cleanups
These are the last conversions of pci_set_dma_mask(),
pci_set_consistent_dma_mask() and pci_dma_supported() to use DMA_xBIT_MASK
constants from linux/dma-mapping.h

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:44 -07:00
Linus Torvalds
f27f0a045b Merge master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa
* master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (28 commits)
  [ALSA] Kconfig SND_SEQUENCER_OSS help text fix
  [ALSA] Add Aux input switch control for Aureon Universe
  [ALSA] pcxhr - Fix the crash with REV01 board
  [ALSA] sound/pci/hda: use create_singlethread_workqueue()
  [ALSA] hda-intel - Add support of ATI SB600
  [ALSA] cs4281 - Fix the check of timeout in probe
  [ALSA] cs4281 - Fix the check of right channel
  [ALSA] Test volume resolution of usb audio at initialization
  [ALSA] maestro3.c: fix BUG, optimization
  [ALSA] HDA/Realtek: multiple input mux definitions and pin mode additions
  [ALSA] AdLib FM card driver
  [ALSA] Fix / clean up PCM-OSS setup hooks
  [ALSA] Clean up PCM codes (take 2)
  [ALSA] Tiny clean up of PCM codes
  [ALSA] ISA drivers bailing on first !enable[i]
  [ALSA] Remove obsolete kfree_nocheck call
  [ALSA] Remove obsolete kfree_nocheck call
  [ALSA] Add snd-als300 driver for Avance Logic ALS300/ALS300+ soundcards
  [ALSA] Add snd-riptide driver for Conexant Riptide chip
  [ALSA] hda-codec - Fix noisy output wtih AD1986A 3stack model
  ...
2006-04-02 13:08:49 -07:00
Frederik Deweerdt
c2f60c523a [ALSA] Kconfig SND_SEQUENCER_OSS help text fix
Fix misleading help text for SND_SEQUENCER_OSS config option.

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:01 +02:00
Maximilian Rehkopf
af9b70ac00 [ALSA] Add Aux input switch control for Aureon Universe
This patch adds a mixer control which allows the user to switch the Aux
playback between the internal Aux jack, Wavetable, and Rear Line-In on
Aureon Universe cards.

For switching, a PCA9554 (8-line GPIO with I2C interface) and a 74HC4052
(dual 4-way mux/demux) are used.  Output 0 and 1 of the PCA9554 are
connected to the select pins of the 74HC4052. The I2C interface of the
PCA9554 is connected to the card's internal SPI bus which is also used
to control the WM8770 and CS8415. SPI and I2C on the same lines...

To communicate with the PCA9554 the WM8770 and CS8415 are disabled and
an I2C Stop Condition is generated before the Start Condition (needed
for synchronisation because other SPI traffic appear to confuse the
PCA9554). Then a normal I2C data transfer takes place.  Programming must
be done ridiculously slow; in theory, 4.7us is the minimum delay time
for normal-speed I2C according to the datasheet, but even with 10us
switching was unreliable.  The Windows driver from Terratec does the
programming very slowly, too (checked with an oscilloscope).

PCA9554 datasheet:
http://www.semiconductors.philips.com/acrobat/datasheets/PCA9554_9554A_6.pdf

74HC4052 datasheet:
http://www.semiconductors.philips.com/acrobat/datasheets/74HC_HCT4052_4.pdf

Signed-off-by: Maximilian Rehkopf <otakon@gmx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:01 +02:00
Markus Bollinger
0bd43b5bc9 [ALSA] pcxhr - Fix the crash with REV01 board
On a new board revision for pcxhr boards, the
PCXHR_CHIPSC_GPI_USERI bit is no more supported.
The cards concerned have a REV01 in their PCI ID.

As the current driver tests this bit and does not load the
first Xilinx binary when it's 1, the card will crash on Xilinx
access over PCI. (the PCI will freeze ....)

The fix (fix to version 1.0.11rc4) works for both REV00 and
REV01 cards.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:01 +02:00
OGAWA Hirofumi
ce7415f496 [ALSA] sound/pci/hda: use create_singlethread_workqueue()
process_unsol_events() seems to assume a singlethread one (IOW, racey).
So, this patch uses create_singlethread_workqueue() instead of
create_workqueue().

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:01 +02:00
Felix Kuehling
89be83f8ee [ALSA] hda-intel - Add support of ATI SB600
This patch adds support for high definition audio on ATI SB600.

Signed-off-by: Felix Kuehling <fkuehlin@ati.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:01 +02:00
Takashi Iwai
38223daa1a [ALSA] cs4281 - Fix the check of timeout in probe
Fix the check of timeout in probe routines to work properly
reagrdless of HZ (ALSA bug#1976).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:00 +02:00
Takashi Iwai
e860f00047 [ALSA] cs4281 - Fix the check of right channel
Fix the check of right channel in mixer volume put callback.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:00 +02:00
Takashi Iwai
14790f1c73 [ALSA] Test volume resolution of usb audio at initialization
Test the volume of usb audio whether actually it works and adjusts
the resolution value according to it.

Some USB audio devices report a lower resolution than it reacts.
The only possible check is to write and read a volume value.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:00 +02:00
Andreas Mohr
0b2dcd5d6a [ALSA] maestro3.c: fix BUG, optimization
- fix brown-paper-bag locking bug (lock() / return / unlock())
- improve central function snd_m3_update_ptr()
  (avoid expensive integer divisions)
- add cpu_relax() to busy-wait I/O loop as recommended
  (does this require special macro support in ALSA for older kernels??)
- constify several structs
- spelling updates

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:00 +02:00
Jonathan Woithe
a1e8d2da03 [ALSA] HDA/Realtek: multiple input mux definitions and pin mode additions
The following patch relative to CVS from 20060324 adds the following
features to the Realtek HDA codec.

1) Define two new pin modes: ALC_PIN_DIR_IN_NOMICBIAS and
   ALC_PIN_DIR_INOUT_NOMICBIAS.  These can be used with jack mode switch
   definitions in mixers to prevent the user being offered the mic bias
   options if the hardware doesn't support it.

2) Add the ability to have different input mux definitions for different
   ADCs.  This is needed because the ALC260 chip uses different mux layouts
   for the two onboard ADCs.  A new field (num_mux_defs) was added to the
   alc_spec and alc_config_preset structures to support this.

3) Adjust numerous comments to make them consistent with the above changes.

4) Utilise the new multi-mux definition functionality for the ALC260 fujitsu
   model to allow recording of the mixer output.

5) Utilise the new multi-mux definition functionality for the ALC260 test
   model to make the mux selections a little less confusing.

6) Allow the headphone jack of the ALC260 acer model to be retasked in
   the mixer.

6) Utilise the new multi-mux definition functionality for the ALC260 acer
   model to give access to the mixer output and the retasked headphone
   jack.

At this stage the *_NOMICBIAS modes are not used.  We have reports that the
"Line" jack of at least some Acer models doesn't pass the bias out, and we
also know that NIDs 0x0f and 0x10 don't seem to accept the mic bias requests
at all.  However, I feel we need to collect more evidence on both counts
before committing to the use of *_NOMICBIAS.  In the case of the Acers, it's
not clear whether this issue (probably caused by the inclusion of DC
blocking capacitors) affects all Acer models or just a small number.  With
the issue with NIDs 0x0f and 0x10 it's unclear whether this is a hardware
bug which will be addressed in later chip revisions or if it's an
intentional restriction.  The datasheet makes no mention of the restriction
so at this stage I'm inclined to consider it a hardware bug.  Comments in
the source reflect this reasoning.

On a similar theme, the headphone jack of the Fujitsu S7020 also doesn't
appear to pass mic bias voltage.  I'm still investigating this however.

With the ability to retask the headphone jack, owners of ALC260-based Acer
laptops should now be able to record 4 channels of audio if they desire. The
multiple mux definitions allow this jack to be presented from both ADCs
(since this mux input is one of those which differs between the muxes).

This patch has been tested on a Fujitsu S7020 laptop and appears to behave
itself both for the "test" and "fujitsu" models.  Definitions using only a
single mux specification also work.  Other ALC chips should be fine but I
cannot test these myself.  The "auto" modes should also continue to function
but again I have not verified this.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:59:00 +02:00
Rene Herman
cf40a310a7 [ALSA] AdLib FM card driver
Attached you'll find an ALSA driver for AdLib FM cards. An AdLib card is
just an OPL2, which was already supported by sound/drivers/opl3, so only
very minimal bus-glue is needed. The patch applies cleanly to both
2.6.16 and 2.6.16-mm1.

The driver has been tested with an actual ancient 8-bit ISA AdLib card
and works fine. It also works fine for an OPL3 {,emulation} as still
found on many ISA soundcards but given that AdLib cards don't have their
own mixer, upping the volume from 0 might be a problem without the card
driver already loaded and driving the OPL3.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:59 +02:00
Takashi Iwai
060d77b9c0 [ALSA] Fix / clean up PCM-OSS setup hooks
- Fix possible race of referring the setup hook from the running PCM
- Fix memory leak in an error path of proc write
- Clean up the setup hook parser

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:59 +02:00
Takashi Iwai
3bf75f9b90 [ALSA] Clean up PCM codes (take 2)
- Clean up initialization and destruction of substream instance
  Now snd_pcm_open_substream() alone does most initialization jobs.
  Add pcm_release callback for cleaning up at snd_pcm_release_substream()
- Tidy up PCM oss code

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:59 +02:00
Takashi Iwai
bf1bbb5a49 [ALSA] Tiny clean up of PCM codes
- Make snd_pcm_prepare() static
- Clean up snd_pcm_kernel_*_ioctl() functions, reduce exports

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:58 +02:00
Rene Herman
82756b2785 [ALSA] ISA drivers bailing on first !enable[i]
Fix the wrong check of enable option in cmi8330 driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:58 +02:00
Takashi Iwai
43560116d1 [ALSA] Remove obsolete kfree_nocheck call
Fixed the compilation, removing obsolete kfree_nocheck() call
for memory debugging.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:58 +02:00
Takashi Iwai
10d150e186 [ALSA] Remove obsolete kfree_nocheck call
Fixed the compilation, removing obsolete kfree_nocheck() call
for memory debugging.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:58 +02:00
Ash Willis
b3a70d5ece [ALSA] Add snd-als300 driver for Avance Logic ALS300/ALS300+ soundcards
Added snd-als300 driver for Avance Logic ALS300/ALS300+ soundcards
by Ash Willis.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:58 +02:00
Peter Gruber
109a9638f0 [ALSA] Add snd-riptide driver for Conexant Riptide chip
Add snd-riptide driver for Conexant Riptide chip by Peter Gruber.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:57 +02:00
Takashi Iwai
2125cad291 [ALSA] hda-codec - Fix noisy output wtih AD1986A 3stack model
Fixed the noisy output wtih AD1986A 3stack model using 2 channels.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:57 +02:00
Takashi Iwai
505cb341ef [ALSA] hda-codec - Fix unsol event initialization at resume of stac92xx
Fix the re-initialization of unsolicited events at resume of stac92xx codecs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:57 +02:00
Takashi Iwai
675b4e5981 [ALSA] Make CONFIG_SND_CS46XX_NEW_DSP yes as default
Removed from CONFIG_EXPERIMENTAL from CONFIG_SND_CS46XX_NEW_DSP, and
make default to yes.  This option works fine for years.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:57 +02:00
Martin Langer
1841f613fd [ALSA] Add snd-miro driver
Added snd-miro driver for miroSOUND PCM by Martin Langer.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:56 +02:00
Takashi Iwai
cbac4b0cb6 [ALSA] Cleanup unused argument for snd_power_wait()
Removed the unused file argument of snd_power_wait().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:56 +02:00
Alan Horstmann
6285ae1df1 [ALSA] ice1712 - Fix wrong register value for DMX 6FIRE
I have just discovered I made an error in the register value set in 'Limit
dmx6fire to 6 dacs' patch (bug1472).  The value set should be '2a' not '0a'
as in the original patch, which unintentionally disables the 2nd MPU 401
UART.

Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:56 +02:00
Takashi Iwai
c04d092bde [ALSA] via82xx - Add dxs entry for EPoX EP-8KRAI
Added the dxs_support entry for EPoX EP-8KRAI (ALSA bug#1423).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:56 +02:00
Takashi Iwai
c960a03bee [ALSA] hda-codec - Fix VREF level of Mic inputs on STAC92xx codecs
Fixed VREF level of Mic inputs on STAC92xx codecs (ALSA bug#1953).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:56 +02:00
Takashi Iwai
d681518a56 [ALSA] Add support of LG LW20 laptop
Add support of LG LW20 laptop with ALC880 codec (ALSA bug#1572).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:55 +02:00
Dominik Brodowski
9940ec3617 [PATCH] pcmcia: convert DEV_OK to pcmcia_dev_present
Instead of the DEV_OK macro, drivers should use pcmcia_dev_present().

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:57 +02:00
Dominik Brodowski
e2d4096365 [PATCH] pcmcia: use bitfield instead of p_state and state
Instead of the two status values struct pcmcia_device->p_state and state,
use descriptive bitfields. Most value-checking in drivers was invalid, as
the core now only calls the ->remove() (a.k.a. detach) function in case the
attachement _and_ configuration was successful.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:33 +02:00
Dominik Brodowski
15b99ac172 [PATCH] pcmcia: add return value to _config() functions
Most of the driver initialization isn't done in the .probe function, but in
the internal _config() functions. Make them return a value, so that .probe
can properly report whether the probing of the device succeeded or not.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:06 +02:00
Dominik Brodowski
fba395eee7 [PATCH] pcmcia: remove dev_link_t and client_handle_t indirection
dev_link_t * and client_handle_t both mean struct pcmcai_device * by now.
Therefore, remove all such indirections.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:21:06 +02:00
Dominik Brodowski
fd238232cd [PATCH] pcmcia: embed dev_link_t into struct pcmcia_device
Embed dev_link_t into struct pcmcia_device(), as they basically address the
same entity. The actual contents of dev_link_t will be cleaned up step by step.
This patch includes a bugfix from and signed-off-by Andrew Morton.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:57 +02:00
Dominik Brodowski
70294b4683 [PATCH] pcmcia: remove unneeded Vcc pseudo setting
As we do not allow setting Vcc in the pcmcia core, and Vpp1 and
Vpp2 can only be set to the same value, a lot of code can be
streamlined.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:55 +02:00
Dominik Brodowski
8661bb5b4a [PATCH] pcmcia: default suspend and resume handling
In all but one case, the suspend and resume functions of PCMCIA drivers
contain mostly of calls to pcmcia_release_configuration() and
pcmcia_request_configuration(). Therefore, move this code out of the
drivers and into the core.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:52 +02:00
Dominik Brodowski
50db3fdbbc [PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irq
Convert the remaining drivers which use pcmcia_release_io or
pcmcia_release_irq, and remove the EXPORT of these symbols.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:51 +02:00
Dominik Brodowski
5f2a71fcb7 [PATCH] pcmcia: add pcmcia_disable_device
pcmcia_disable_device(struct pcmcia_device *p_dev) performs the necessary
cleanups upon device or driver removal: it calls the appropriate
pcmcia_release_* functions, and can replace (most) of the current drivers'
_release() functions.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:50 +02:00
Paul Mackerras
bac30d1a78 Merge ../linux-2.6 2006-03-29 13:24:50 +11:00
Jesper Juhl
4fa95ef639 [PATCH] sound: Remove unneeded kmalloc() return value casts
Get rid of unnessesary casts of kmalloc() return value in sound/

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:09 -08:00
Alexey Dobriyan
7f927fcc2f [PATCH] Typo fixes
Fix a lot of typos.  Eyeballed by jmc@ in OpenBSD.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:08 -08:00
Jesper Juhl
ca43b317fc [PATCH] vfree does its own NULL check, no need to be explicit in oss/msnd.c
vfree() does it's own NULL checking, no need for explicit check before
calling it.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:08 -08:00
Jesper Juhl
5a83fdddb8 [PATCH] no need to check vfree arg for null in oss/sequencer
There's no need to check pointers for NULL before handing them to vfree().

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:08 -08:00
Jesper Juhl
07e0e93d9a [PATCH] maestro3 vfree NULL check fixup
vfree() checks for NULL, no need to do it explicitly.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Zach Brown <zab@zabbo.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:08 -08:00
Jesper Juhl
457d3d432b [PATCH] vfree NULL check fixup for sb_card
There's no need to check the vfree() argument for NULL.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:07 -08:00
Matthias Gehre
910638ae7e [PATCH] Replace 0xff.. with correct DMA_xBIT_MASK
Replace all occurences of 0xff..  in calls to function pci_set_dma_mask()
and pci_set_consistant_dma_mask() with the corresponding DMA_xBIT_MASK from
linux/dma-mapping.h.

Signed-off-by: Matthias Gehre <M.Gehre@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:07 -08:00
Arjan van de Ven
99ac48f54a [PATCH] mark f_ops const in the inode
Mark the f_ops members of inodes as const, as well as fix the
ripple-through this causes by places that copy this f_ops and then "do
stuff" with it.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:05 -08:00
Benjamin Herrenschmidt
e8222502ee [PATCH] powerpc: Kill _machine and hard-coded platform numbers
This removes statically assigned platform numbers and reworks the
powerpc platform probe code to use a better mechanism.  With this,
board support files can simply declare a new machine type with a
macro, and implement a probe() function that uses the flattened
device-tree to detect if they apply for a given machine.

We now have a machine_is() macro that replaces the comparisons of
_machine with the various PLATFORM_* constants.  This commit also
changes various drivers to use the new macro instead of looking at
_machine.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-28 23:15:54 +11:00
Bjorn Helgaas
c94ded6e60 [PATCH] PNP: adjust pnp_register_card_driver() signature: wavefront
Remove the assumption that pnp_register_card_driver() returns the
number of devices claimed.  And fix some __init/__devinit issues.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:55 -08:00