Commit Graph

646 Commits

Author SHA1 Message Date
Linus Torvalds
62933d36ac Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (24 commits)
  [POWERPC] Fix compile error with kexec and CONFIG_SMP=n
  [POWERPC] Split initrd logic out of early_init_dt_scan_chosen() to fix warning
  [POWERPC] Fix warning in hpte_decode(), and generalize it
  [POWERPC] Minor pSeries IOMMU debug cleanup
  [POWERPC] PS3: Fix sys manager build error
  [POWERPC] Assorted janitorial EEH cleanups
  [POWERPC] We don't define CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
  [POWERPC] pmu_sys_suspended is only defined for PPC32
  [POWERPC] Fix incorrect calculation of I/O window addresses
  [POWERPC] celleb: Update celleb_defconfig
  [POWERPC] celleb: Fix parsing of machine type hack command line option
  [POWERPC] celleb: Fix PCI config space accesses to subordinate buses
  [POWERPC] celleb: Fix support for multiple PCI domains
  [POWERPC] Wire up sys_utimensat
  [POWERPC] CPM_UART: Removed __init from cpm_uart_init_portdesc to fix warning
  [POWERPC] User rheap from arch/powerpc/lib
  [POWERPC] 83xx: Fix the PCI ranges in the MPC834x_MDS device tree.
  [POWERPC] 83xx: Fix the PCI ranges in the MPC832x_MDS device tree.
  [POWERPC] CPM_UART: cpm_uart_set_termios should take ktermios, not termios
  [POWERPC] Change rheap functions to use ulongs instead of pointers
  ...
2007-05-10 13:32:24 -07:00
Linus Torvalds
0ab598099c Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Use alloc_pci_dev() in PCI bus probes.
  [SPARC64]: Bump PROMINTR_MAX to 32.
  [SPARC64]: Fix recursion in PROM tree building.
  [SERIAL] sunzilog: Interrupt enable before ISR handler installed
  [SPARC64] PCI: Consolidate PCI access code into pci_common.c
2007-05-10 13:32:05 -07:00
Martin Schwidefsky
e25df1205f [S390] Kconfig: menus with depends on HAS_IOMEM.
Add "depends on HAS_IOMEM" to a number of menus to make them
disappear for s390 which does not have I/O memory.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10 15:46:07 +02:00
Kumar Gala
32a56ebb24 [POWERPC] CPM_UART: Removed __init from cpm_uart_init_portdesc to fix warning
cpm_uart_init_portdesc is referenced from non-init code and thus we were
getting the following warning:

WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:cpm_uart_init_portdesc from .text between 'cpm_uart_init' (at offset 0x18020) and 'cpm_uart_drv_remove'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09 23:44:58 -05:00
Scott Wood
1bda8f3056 [POWERPC] CPM_UART: cpm_uart_set_termios should take ktermios, not termios
This eliminates some warnings.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09 23:05:48 -05:00
Timur Tabi
4c35630ccd [POWERPC] Change rheap functions to use ulongs instead of pointers
The rheap allocation functions return a pointer, but the actual value is based
on how the heap was initialized, and so it can be anything, e.g. an offset
into a buffer.  A ulong is a better representation of the value returned by
the allocation functions.

This patch changes all of the relevant rheap functions to use a unsigned long
integers instead of a pointer.  In case of an error, the value returned is
a negative error code that has been cast to an unsigned long.  The caller can
use the IS_ERR_VALUE() macro to check for this.

All code which calls the rheap functions is updated accordingly.  Macros
IS_MURAM_ERR() and IS_DPERR(), have been deleted in favor of IS_ERR_VALUE().

Also added error checking to rh_attach_region().

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09 23:01:43 -05:00
Mark Fortescue
7cc5c8559c [SERIAL] sunzilog: Interrupt enable before ISR handler installed
This patch changes the interrupt enable sequence for the sunzilog driver 
so that interrupts are not enabled untill after the interrupt handler has 
been installed. If this is not done, some SS1 and SS2 sun4c systems panic 
on un-handled interrupt before the handler gets installed preventing boot.

It also adds in support for the ESCC version of the zilog chips. The
changes mean that the FIFO will be enabled for ESCC versions of the
SCC UART. My interpretation of the SCC manual and the existing interrupt
handler code is that it sould be able to make good use of the FIFO without
issues.

Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-09 13:49:04 -07:00
Linus Torvalds
df6d3916f3 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (77 commits)
  [POWERPC] Abolish powerpc_flash_init()
  [POWERPC] Early serial debug support for PPC44x
  [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc
  [POWERPC] Add device tree for Ebony
  [POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for now
  [POWERPC] MPIC U3/U4 MSI backend
  [POWERPC] MPIC MSI allocator
  [POWERPC] Enable MSI mappings for MPIC
  [POWERPC] Tell Phyp we support MSI
  [POWERPC] RTAS MSI implementation
  [POWERPC] PowerPC MSI infrastructure
  [POWERPC] Rip out the existing powerpc msi stubs
  [POWERPC] Remove use of 4level-fixup.h for ppc32
  [POWERPC] Add powerpc PCI-E reset API implementation
  [POWERPC] Holly bootwrapper
  [POWERPC] Holly DTS
  [POWERPC] Holly defconfig
  [POWERPC] Add support for 750CL Holly board
  [POWERPC] Generalize tsi108 PCI setup
  [POWERPC] Generalize tsi108 PHY types
  ...

Fixed conflict in include/asm-powerpc/kdebug.h manually

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:50:19 -07:00
Bjorn Helgaas
7e92b4fc34 x86, serial: convert legacy COM ports to platform devices
Make x86 COM ports into platform devices and don't probe for them
if we have PNP.

This prevents double discovery, where a device was found both by
the legacy probe and by 8250_pnp, e.g.,

    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

This also means IRDA devices without a UART PNP ID will no longer be
claimed by the serial driver, which might require changes in IRDA
drivers and administration.

In addition to this patch, you may need to configure a setserial init
script, e.g., /etc/init.d/setserial, so it doesn't poke legacy UART
stuff back in.  On Debian, "dpkg-reconfigure setserial" with the "kernel"
option does this.

To force the old legacy probe behavior even when we have PNPBIOS or
ACPI, load the new legacy_serial module (or build 8250 static) with
the "legacy_serial.force" option.

[akpm@linux-foundation.org: fix makefiles]
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Keith Owens <kaos@ocs.com.au>
Cc: Len Brown <lenb@kernel.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Matthieu CASTET <castet.matthieu@free.fr>
Cc: Jean Tourrilhes <jt@hpl.hp.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Ville Syrjala <syrjala@sci.fi>
Cc: Russell King <rmk+serial@arm.linux.org.uk>
Cc: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:23 -07:00
Josh Boyer
fef92c30d4 8250: Remove commented out irq cruft
Remove some obviously old interrupt disable/enable code that has been
commented out.

Signed-off-by: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:15 -07:00
Atsushi Nemoto
a4bb27d99c serial_txx9: zap changelog from source code
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:12 -07:00
Atsushi Nemoto
07bafde351 serial_txx9: Use assigned device numbers
The serial_txx9 driver have abused device numbers (major 4, minor 128) if
CONFIG_SERIAL_TXX9_STDSERIAL was not set.  This patch makes the driver use
proper device numbers assigned for it (major 204, minor 196-203).  I
suppose a typical user of this driver set CONFIG_SERIAL_TXX9_STDSERIAL to Y
(i.e.  use "ttyS0"), so this patch would not cause big compatibility issue.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:12 -07:00
Milind Arun Choudhary
076fa0fa2d SPIN_LOCK_UNLOCKED cleanup in drivers/serial
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead

Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:11 -07:00
Randy Dunlap
e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Len Sorensen
e97cb3e28c Subject: jsm driver fix for linuxpps support
The jsm driver doesn't currently use the uart_handle_*_change helper
functions, which are the obvious place for things like linuxpps to tie
into (which it now does of course), and as a result the jsm driver can
not be used with linuxpps and anything else that ties into the
serial_core helper functions.  This patch adds calls to these helper
functions whenever the value they manage changes.  That actual storage
of the state is not modified since the jsm driver caches the current
settings (The 8250 driver reads them everytime a user asks for the
state), and only updates them whenever they change.

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Cc: Scott H Kilau <Scott_Kilau@digi.com>
Cc: Wendy Xiong <wendyx@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:03 -07:00
Len Sorensen
3c04c27251 Small fixes for jsm driver
The jsm driver fails when you try to use the TIOCSSERIAL ioctl.  The reason
is that the driver never sets uart_port.uartclk, causing the data received
using TIOCGSERIAL to not match the internal state of the driver.  This
patch fixes this problem by settings the uartclk to the value used by the
serial_core (16 times the baud base).

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Cc: Scott H Kilau <Scott_Kilau@digi.com>
Cc: Wendy Xiong <wendyx@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:03 -07:00
Paul Mackerras
02bbc0f09c Merge branch 'linux-2.6' 2007-05-08 13:37:51 +10:00
Linus Torvalds
ef93127e4c Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SERIAL] sunsu: Fix section mismatch warnings.
  [SPARC64]: pgtable_cache_init() should be __init.
  [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/prom.c
  [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/pci.c
  [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/console.c
  [MM]: sparse_init() should be __init.
  [SPARC64]: Update defconfig.
  [VIDEO]: Add Sun XVR-2500 framebuffer driver.
  [VIDEO]: Add Sun XVR-500 framebuffer driver.
  [SPARC64]: SUN4U PCI-E controller support.
  [SPARC]: Fix comment typo in smp4m_blackbox_current().
  [SCSI] SUNESP: sun_esp.c needs linux/delay.h

Fix up conflict in arch/sparc64/mm/init.c manually due to removal of
pgtable_cache_init() through the -mm patches (even though that patch was
also by David ;)

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:22:48 -07:00
Linus Torvalds
5b6b549822 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (38 commits)
  sh: R7785RP board updates.
  sh: Update r7780rp defconfig.
  sh: Add die chain notifiers.
  sh: Fix APM emulation on hp6xx.
  sh: Wire up more IRQs for SH7709.
  sh: Solution Engine 7722 board support.
  sh: Fix r7780rp build.
  sh: kdump support.
  sh: Move clock reporting to its own proc entry.
  sh: Solution Engine SH7705 board and CPU updates.
  serial: sh-sci: Fix module clock refcount for serial console.
  serial: sh-sci: Fix module clock refcounting.
  sh: SH7722 clock framework support.
  sh: hp6xx pata_platform support.
  sh: Obey CONFIG_HZ for HZ definition.
  sh: Fix fstatat64() syscall.
  sh: se7780 PCI support.
  sh: SH7780 Solution Engine board support.
  sh: Add a dummy SH-4 PCIC fixup.
  sh: Tidy up L-BOX area5 addresses.
  ...
2007-05-07 12:17:40 -07:00
Robert P. J. Day
c65808ef76 remove unused header file: drivers/serial/crisv10.h
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:13:00 -07:00
Bryan Wu
194de56127 blackfin: serial driver
This patch implements the driver necessary use the Analog Devices Blackfin
processor's Serial Port.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Russell King <rmk+lkml@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:58 -07:00
Jiri Slaby
eb3a1e1145 Serial: serial_core, use pr_debug
serial_core, use pr_debug

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:51 -07:00
Dave Jiang
1733310bb7 MPSC serial driver tx locking
The MPSC serial driver assumes that interrupt is always on to pick up the
DMA transmit ops that aren't submitted while the DMA engine is active.
However when irqs are off for a period of time such as operations under
kernel crash dump console messages do not show up due to additional DMA ops
are being dropped.  This makes console writes to process through all the tx
DMAs queued up before submitting a new request.

Also, the current locking mechanism does not protect the hardware registers
and ring buffer when a printk is done during the serial write operations.
The additional per port transmit lock provides a finer granular locking and
protects registers being clobbered while printks are nested within UART
writes.

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:50 -07:00
David Gibson
abb4a23907 serial: define FIXED_PORT flag for serial_core
At present, the serial core always allows setserial in userspace to change the
port address, irq and base clock of any serial port.  That makes sense for
legacy ISA ports, but not for (say) embedded ns16550 compatible serial ports
at peculiar addresses.  In these cases, the kernel code configuring the ports
must know exactly where they are, and their clocking arrangements (which can
be unusual on embedded boards).  It doesn't make sense for userspace to change
these settings.

Therefore, this patch defines a UPF_FIXED_PORT flag for the uart_port
structure.  If this flag is set when the serial port is configured, any
attempts to alter the port's type, io address, irq or base clock with
setserial are ignored.

In addition this patch uses the new flag for on-chip serial ports probed in
arch/powerpc/kernel/legacy_serial.c, and for other hard-wired serial ports
probed by drivers/serial/of_serial.c.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:50 -07:00
Thomas Koeller
bd71c182d5 RM9000 serial driver
Add support for the integrated serial ports of the MIPS RM9122 processor
and its relatives.

The patch also does some whitespace cleanup.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:50 -07:00
Marc St-Jean
beab697ab4 serial driver PMC MSP71xx
Serial driver patch for the PMC-Sierra MSP71xx devices.

There are three different fixes:

1 Fix for DesignWare APB THRE errata: In brief, this is a non-standard
  16550 in that the THRE interrupt will not re-assert itself simply by
  disabling and re-enabling the THRI bit in the IER, it is only re-enabled
  if a character is actually sent out.

  It appears that the "8250-uart-backup-timer.patch" in the "mm" tree
  also fixes it so we have dropped our initial workaround.  This patch now
  needs to be applied on top of that "mm" patch.

2 Fix for Busy Detect on LCR write: The DesignWare APB UART has a feature
  which causes a new Busy Detect interrupt to be generated if it's busy
  when the LCR is written.  This fix saves the value of the LCR and
  rewrites it after clearing the interrupt.

3 Workaround for interrupt/data concurrency issue: The SoC needs to
  ensure that writes that can cause interrupts to be cleared reach the UART
  before returning from the ISR.  This fix reads a non-destructive register
  on the UART so the read transaction completion ensures the previously
  queued write transaction has also completed.

Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:50 -07:00
Grant Likely
a348119778 [POWERPC] Don't shutdown TX on mpc5200 serial port if it is a console
If the serial port gets shut down, then console output stalls.  9 out
of 10 kernel hackers agree, this is a bad thing.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:15 +10:00
Stephen Rothwell
55b61fec22 [POWERPC] Rename device_is_compatible to of_device_is_compatible
for consistency with other Open Firmware interfaces (and Sparc).

This is just a straight replacement.

This leaves the compatibility define in place.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:14 +10:00
David S. Miller
90a660a454 [SERIAL] sunsu: Fix section mismatch warnings.
Mark sunsu_console_setup() as __init and rename 'sunsu_cons'
to 'sunsu_console' so that it matches modpost.c's whitelist.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-07 00:14:13 -07:00
Paul Mundt
005a336e71 serial: sh-sci: Fix module clock refcount for serial console.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:56 +00:00
dmitry pervushin
1534a3b3dc serial: sh-sci: Fix module clock refcounting.
This adds the enable/disable hooks for the port clock to sh-sci.

Signed-off-by: dmitry pervushin <dimka@nomadgs.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:56 +00:00
Nobuhiro Iwamatsu
9465a54fa4 sh: MS7712SE01 board support.
Support the SH7712 (SH3-DSP) Solution Engine reference board.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:54 +00:00
Paul Mundt
8248daac6b serial: sh-sci: Kill off breakpoint in break IRQ.
With the GDB stub being entered via a special sysrq trigger,
we don't want to hit it directly from sci_br_interrupt().
Without this, there is access to the other sysrq triggers when
kgdb is enabled.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:53 +00:00
Paul Mundt
32351a28a7 sh: Add SH7785 Highlander board support (R7785RP).
This adds preliminary support for the SH7785-based Highlander board.
Some of the Highlander support code is reordered so that most of it
can be reused directly.

This also plugs in missing SH7785 checks in the places that need it,
as this is the first board to support the CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:53 +00:00
Paul Mundt
fa5da2f7bd sh: Bring kgdb back from the dead.
This code has suffered quite a bit of bitrot, do some basic
tidying to get it to a reasonably functional state again.
This gets the basic support and the console working again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:51 +00:00
Linus Torvalds
c6799ade4a Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (82 commits)
  [ARM] Add comments marking in-use ptrace numbers
  [ARM] Move syscall saving out of the way of utrace
  [ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro
  [ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header
  [ARM] mm 10: allow memory type to be specified with ioremap
  [ARM] mm 9: add additional device memory types
  [ARM] mm 8: define mem_types table L1 bit 4 to be for ARMv6
  [ARM] iop: add missing parens in macro
  [ARM] mm 7: remove duplicated __ioremap() prototypes
  ARM: OMAP: fix OMAP1 mpuio suspend/resume oops
  ARM: OMAP: MPUIO wake updates
  ARM: OMAP: speed up gpio irq handling
  ARM: OMAP: plat-omap changes for 2430 SDP
  ARM: OMAP: gpio object shrinkage, cleanup
  ARM: OMAP: /sys/kernel/debug/omap_gpio
  ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon
  ARM: OMAP: Enable 24xx GPIO autoidling
  [ARM] 4318/2: DSM-G600 Board Support
  [ARM] 4227/1: minor head.S fixups
  [ARM] 4328/1: Move i.MX UART regs to driver
  ...
2007-05-06 13:20:10 -07:00
Russell King
6f95416ebe Merge branches 'arm-mm', 'at91', 'clkevts', 'imx', 'iop', 'misc', 'netx', 'ns9xxx', 'omap', 'pxa', 'rpc', 's3c' and 'sa1100' into devel 2007-05-06 20:57:51 +01:00
Sascha Hauer
ff4bfb2163 [ARM] 4328/1: Move i.MX UART regs to driver
This patch moves the i.MX UART register descriptions from
include/asm-arm/arch-imx/imx-regs.h to the serial driver itself.
This helps using the driver on other architectures like mx31

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-03 20:24:21 +01:00
Andrew Victor
03abeac0a2 [ARM] 4357/1: AT91: Support slower serial baud-rates
Allow slower serial baud-rates by switching the UART clock from MCK to
MCK/8.

Based on patches by Mike Wolfram and Russell King.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-03 14:12:45 +01:00
Stephen Rothwell
40cd3a4564 [POWERPC] Rename get_property to of_get_property: drivers
These are all the remaining instances of get_property.  Simple rename of
get_property to of_get_property.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:32 +10:00
Paul Mackerras
49e1900d4c Merge branch 'linux-2.6' into for-2.6.22 2007-04-30 12:38:01 +10:00
Paul Mackerras
a48141db68 Revert "[POWERPC] Rename get_property to of_get_property: drivers"
This reverts commit d05c7a80cf,
which included changes which should go via other subsystem
maintainers.
2007-04-26 22:24:31 +10:00
Stephen Rothwell
ccf0dec6fc [SPARC/64] constify of_get_property return: drivers
The only unfortunate bit here is that the name field of struct map_info
is not const, so for now we put a cast on the assignment of it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:54:27 -07:00
Jiri Kosina
4bf3631cdb 8250: fix possible deadlock between serial8250_handle_port() and serial8250_interrupt()
Commit 40b36daa introduced possibility that serial8250_backup_timeout() ->
serial8250_handle_port() locks port.lock without disabling irqs, thus
allowing deadlock against interrupt handler (port.lock is acquired in
serial8250_interrupt()).

Spotted by lockdep.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-24 08:23:09 -07:00
Jiri Slaby
98f85d30ce Char: icom, mark __init as __devinit
Two functions are called from __devinit context, but they are marked as
__init. Fix this.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-24 08:23:09 -07:00
Olaf Hering
179fb0c726 do not truncate irq number for icom adapter
irq values are u32, not u8. Large irq numbers will be truncated,
free_irq may free a different irq.

Remove incorrectly sized struct member and use the one from pci_dev.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-24 08:23:08 -07:00
Taku Izumi
fdc30b3d44 Fix possible NULL pointer access in 8250 serial driver
I encountered the following kernel panic.  The cause of this problem was
NULL pointer access in check_modem_status() in 8250.c.  I confirmed this
problem is fixed by the attached patch, but I don't know this is the
correct fix.

sadc[4378]: NaT consumption 2216203124768 [1]
Modules linked in: binfmt_misc dm_mirror dm_mod thermal processor fan
container button sg e100 eepro100 mii ehci_hcd ohci_hcd

    Pid: 4378, CPU 0, comm: sadc
    psr : 00001210085a2010 ifs : 8000000000000289 ip : [<a000000100482071>]
    Not tainted
    ip is at check_modem_status+0xf1/0x360

    Call Trace:
    [<a000000100013940>] show_stack+0x40/0xa0
    [<a0000001000145a0>] show_regs+0x840/0x880
    [<a0000001000368e0>] die+0x1c0/0x2c0
    [<a000000100036a30>] die_if_kernel+0x50/0x80
    [<a000000100037c40>] ia64_fault+0x11e0/0x1300
    [<a00000010000bdc0>] ia64_leave_kernel+0x0/0x280
    [<a000000100482070>] check_modem_status+0xf0/0x360
    [<a000000100482300>] serial8250_get_mctrl+0x20/0xa0
    [<a000000100478170>] uart_read_proc+0x250/0x860
    [<a0000001001c16d0>] proc_file_read+0x1d0/0x4c0
    [<a0000001001394b0>] vfs_read+0x1b0/0x300
    [<a000000100139cd0>] sys_read+0x70/0xe0
    [<a00000010000bc20>] ia64_ret_from_syscall+0x0/0x20
    [<a000000000010620>] __kernel_syscall_via_break+0x0/0x20

Fix the possible NULL pointer access in check_modem_status() in 8250.c.  The
check_modem_status() would access 'info' member of uart_port structure, but it
is not initialized before uart_open() is called.  The check_modem_status() can
be called through /proc/tty/driver/serial before uart_open() is called.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Taku Izumi <izumi2005@soft.fujitsu.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-24 08:23:07 -07:00
Stephen Rothwell
30686ba6d5 [POWERPC] Remove old interface find_devices
Replace uses with of_find_node_by_name and for_each_node_by_name.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:09:02 +10:00
Russell King
ed519dede3 [ARM] Convert AMBA PL010 driver to use the clk infrastructure
Convert the AMBA PL010 serial driver to use the clock infrastructure
to allow EP93xx platforms to properly gate the clock to the UARTs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-22 12:30:41 +01:00
Russell King
1b0646a033 [ARM] Convert AMBA PL010 driver to use 'uart_amba_port'
Use a pointer to struct uart_amba_port throughout the driver
rather than a mixture of that and struct uart_port.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-22 11:55:59 +01:00