Commit Graph

3069 Commits

Author SHA1 Message Date
Tejun Heo
580b210232 [PATCH] libata-hp: implement SCSI part of hotplug
Implement SCSI part of hotplug.

This must be done in a separate context as SCSI makes use of EH during
probing.  SCSI scan fails silently if EH is in progress.  In such
cases, libata pauses briefly and retries until every device is
attached.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:28:05 +09:00
Tejun Heo
084fe639b8 [PATCH] libata-hp: implement hotplug
Implement ATA part of hotplug.  To avoid probing broken devices over
and over again, disabled devices are not automatically detached.  They
are detached only if probing is requested for the device or the
associated port is offline.  Also, to avoid infinite probing loop,
Each device is probed only once per EH run.

As SATA PHY status is fragile, devices are detached only after it has
used up its recovery chances unless explicitly requested by LLDD or
user (LLDD may request direct detach if, for example, it supports cold
presence detection).

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:28:03 +09:00
Tejun Heo
9a1004d0c1 [PATCH] libata: export ata_hsm_move()
ata_hsm_move() will be used by LLDDs which depend on standard PIO HSM
but implement their own interrupt handlers.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:27:52 +09:00
Tejun Heo
f5914a461e [PATCH] libata-hp-prep: add prereset() method and implement ata_std_prereset()
With hotplug, every reset might be a probing reset and thus something
similar to probe_init() is needed.  prereset() method is called before
a series of resets to a port and is the counterpart of postreset().
prereset() can tell EH to use different type of reset or skip reset by
modifying ehc->i.action.

This patch also implements ata_std_prereset().  Most controllers
should be able to use this function directly or with some wrapping.
After hotplug, different controllers need different actions to resume
the PHY and detect the newly attached device.  Controllers can be
categorized as follows.

* Controllers which can wait for the first D2H FIS after hotplug.
  Note that if the waiting is implemented by polling TF status, there
  needs to be a way to set BSY on PHY status change.  It can be
  implemented by hardware or with the help of the driver.

* Controllers which can wait for the first D2H FIS after sending
  COMRESET.  These controllers need to issue COMRESET to wait for the
  first FIS.  Note that the received D2H FIS could be the first D2H
  FIS after POR (power-on-reset) or D2H FIS in response to the
  COMRESET.  Some controllers use COMRESET as TF status
  synchronization point and clear TF automatically (sata_sil).

* Controllers which cannot wait for the first D2H FIS reliably.
  Blindly issuing SRST to spinning-up device often results in command
  issue failure or timeout, causing extended delay.  For these
  controllers, ata_std_prereset() explicitly waits ATA_SPINUP_WAIT
  (currently 8s) to give newly attached device time to spin up, then
  issues reset.  Note that failing to getting ready in ATA_SPINUP_WAIT
  is not critical.  libata will retry.  So, the timeout needs to be
  long enough to spin up most devices.

LLDDs can tell ata_std_prereset() which of above action is needed with
ATA_FLAG_HRST_TO_RESUME and ATA_FLAG_SKIP_D2H_BSY flags.  These flags
are PHY-specific property and will be moved to ata_link later.

While at it, this patch unifies function typedef's such that they all
have named arguments.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:27:48 +09:00
Tejun Heo
d7bb4cc757 [PATCH] libata-hp-prep: implement sata_phy_debounce()
With hotplug, PHY always needs to be debounced before a reset as any
reset might find new devices.  Extract PHY waiting code from
sata_phy_resume() and extend it to include SStatus debouncing.  Note
that sata_phy_debounce() is superset of what used to be done inside
sata_phy_resume().

Three default debounce timing parameters are defined to be used by
hot/boot plug.  As resume failure during probing will be properly
handled as errors, timeout doesn't have to be long as before.
probeinit() uses the same timeout to retain the original behavior.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:27:46 +09:00
Tejun Heo
3edebac41b [PATCH] libata-hp-prep: store attached SCSI device
Add device persistent field dev->sdev and store the attached SCSI
device.  With hotplug, libata needs to know the attached SCSI device
to offline and detach it, but scsi_device_lookup() cannot be used
because libata will reuse SCSI ID numbers - dead but not gone devices
(due to zombie opens, etc...) interfere with the lookup.

dev->sdev doesn't hold reference to the SCSI device.  It's cleared
when the SCSI device goes away.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:27:40 +09:00
Tejun Heo
5a04bf4bef [PATCH] libata-hp-prep: implement ap->hw_sata_spd_limit
Add ap->hw_sata_spd_limit and initialize it once during the boot
initialization (or driver load initialization).  ap->sata_spd_limit is
reset to ap->hw_sata_spd_limit on hotplug.  This prevents spd limits
introduced by earlier devices from affecting new devices.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:27:38 +09:00
Tejun Heo
72fa4b742b [PATCH] libata-hp-prep: make some ata_device fields persistent
Lifetimes of some fields span over device plugging/unplugging.  This
patch moves such persistent fields to the top of ata_device and
separate them with ATA_DEVICE_CLEAR_OFFSET.  Fields above the offset
are initialized once during host initializatino while all other fields
are cleared before hotplugging.  Currently ->ap, devno and part of
flags are persistent.

Note that flags is partially cleared while holding host_set lock.
This is to synchronize with later warm plug implementation which will
record hotplug request in dev->flags.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:27:32 +09:00
Tejun Heo
abdda7331d [PATCH] libata-hp-prep: add flags and eh_info/context fields for hotplug
Add hotplug related flags and eh_info/context fields.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:27:29 +09:00
Tejun Heo
c6cf9e99d1 [PATCH] libata: implement ata_eh_wait()
Implement ata_eh_wait().  On return from this function, it's
guaranteed that the EH which was pending or in progress when the
function was called is complete - including the tailing part of SCSI
EH.  This will be used by hotplug and others to synchronize with EH.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:27:27 +09:00
Tejun Heo
7395acb2c8 [PATCH] libata: shift host flag constants
Nudge host flag constants to make a room after ATA_FLAG_EH_PENDING.
New EH flag will be added.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:27:25 +09:00
Alan Cox
75e995855f [PATCH] libata: add pio_data_xfer_noirq
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-26 22:02:23 -04:00
Alan Cox
622b20fcb8 [PATCH] PCI identifiers for the pata_via update
These IDs are also used by the drivers/ide/pci changes submitted by
VIA.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-26 22:02:23 -04:00
Alan Cox
957d2df180 [PATCH] libata: Remove obsolete flag
ATA_FLAG_IRQ_MASK was added when I did the original data transfer with
IRQ masked bits for PIO. It has since been replaced by ->pio_data_xfer
methods so should be removed so nobody uses it by mistake thinking it
still works.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24 02:09:56 -04:00
Alan Cox
a6b2c5d475 [PATCH] PATCH: libata. Add ->data_xfer method
We need to pass the device in order to do per device checks such as
32bit I/O enables. With the changes to include dev->ap we now don't have
to add parameters however just clean them up. Also add data_xfer methods
to the existing drivers except ata_piix (which is in the other block of
patches). If you reject the piix one just add a data_xfer to it...

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24 01:58:54 -04:00
Andrew Chew
4c5c81613b [PATCH] sata_nv: Add MCP61 support
Added MCP61 SATA support to sata_nv.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24 01:34:10 -04:00
Jeff Garzik
26e27cd424 Merge branch 'master' into upstream 2006-05-24 01:32:42 -04:00
David Woodhouse
0f04108237 [PATCH] powerpc: wire up sys_[gs]et_robust_list
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23 10:35:32 -07:00
Andrew Morton
e46e490368 [PATCH] sys_sync_file_range(): move exported flags outside __KERNEL__
These flags are needed by userspace - move them outside __KERNEL__

(Pointed out by dwmw2)

Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23 10:35:31 -07:00
Linus Torvalds
c9d20af62c Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (33 commits)
  V4L/DVB (3965): Fix CONFIG_VIDEO_VIVI=y build bug
  V4L/DVB (3964): Bt8xx/bttv-cards.c: fix off-by-one errors
  V4L/DVB (3914): Vivi build fix
  V4L/DVB (3912): Sparc32 vivi fix
  V4L/DVB (3832): Get_dvb_firmware: download nxt2002 firmware from new driver location
  V4L/DVB (3829): Fix frequency values in the ranges structures of the LG TDVS H06xF tuners
  V4L/DVB (3826): Saa7134: Missing 'break' in Terratec Cinergy 400 TV initialization
  V4L/DVB (3825): Remove broken 'fast firmware load' from cx25840.
  V4L/DVB (3819): Cxusb-bluebird: bug-fix: power down corrupts frontend
  V4L/DVB (3813): Add support for TCL M2523_5N_E tuner.
  V4L/DVB (3804): Tweak bandselect setup fox cx24123
  V4L/DVB (3803): Various correctness fixes to tuning.
  V4L/DVB (3797): Always wait for diseqc queue to become ready before transmitting a diseqc message
  V4L/DVB (3796): Add several debug messages to cx24123 code
  V4L/DVB (3795): Fix for CX24123 & low symbol rates
  V4L/DVB (3792): Kbuild: DVB_BT8XX must select DVB_ZL10353
  V4L/DVB (3790): Use after free in drivers/media/video/em28xx/em28xx-video.c
  V4L/DVB (3788): Fix compilation with V4L1_COMPAT
  V4L/DVB (3782): Removed uneeded stuff from pwc Makefile
  V4L/DVB (3775): Add VIVI Kconfig stuff
  ...
2006-05-21 18:31:53 -07:00
Bob Picco
e984bb43f7 [PATCH] Align the node_mem_map endpoints to a MAX_ORDER boundary
Andy added code to buddy allocator which does not require the zone's
endpoints to be aligned to MAX_ORDER.  An issue is that the buddy allocator
requires the node_mem_map's endpoints to be MAX_ORDER aligned.  Otherwise
__page_find_buddy could compute a buddy not in node_mem_map for partial
MAX_ORDER regions at zone's endpoints.  page_is_buddy will detect that
these pages at endpoints are not PG_buddy (they were zeroed out by bootmem
allocator and not part of zone).  Of course the negative here is we could
waste a little memory but the positive is eliminating all the old checks
for zone boundary conditions.

SPARSEMEM won't encounter this issue because of MAX_ORDER size constraint
when SPARSEMEM is configured.  ia64 VIRTUAL_MEM_MAP doesn't need the logic
either because the holes and endpoints are handled differently.  This
leaves checking alloc_remap and other arches which privately allocate for
node_mem_map.

Signed-off-by: Bob Picco <bob.picco@hp.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:22 -07:00
Adrian Bunk
1b81d6637d [PATCH] drivers/base/firmware_class.c: cleanups
- remove the following global function that is both unused and
  unimplemented:
  - register_firmware()

- make the following needlessly global function static:
  - firmware_class_uevent()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:19 -07:00
Kumar Gala
ccf06998fe [PATCH] spi: add spi master driver for Freescale MPC83xx SPI controller
This driver supports the SPI controller on the MPC83xx SoC devices from
Freescale.  Note, this driver supports only the simple shift register SPI
controller and not the descriptor based CPM or QUICCEngine SPI controller.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:19 -07:00
Albert Lee
3655d1d323 [PATCH] libata: Fix the HSM error_mask mapping (was: Re: libata-tj and SMART)
Fix the HSM error_mask mapping.

Changes:
- Better mapping in ac_err_mask()
- In HSM_ST_FIRST ans HSM_ST state, check ATA_ERR|ATA_DF and map it to AC_ERR_DEV instead of AC_ERR_HSM.
- In HSM_ST_FIRST and HSM_ST state, map DRQ=1 ERR=1 to AC_ERR_HSM.
- For PIO data in and DRQ=1 ERR=1, add check after the junk data block is read.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20 00:37:01 -04:00
Jeff Garzik
3d71b3b0b6 Merge branch 'upstream-fixes' into upstream
Conflicts:

	drivers/scsi/libata-core.c
2006-05-20 00:36:08 -04:00
Pavel Pisa
2c171bf134 [ARM] 3531/1: i.MX/MX1 SD/MMC ensure, that clock are stopped before new command and cleanups
Patch from Pavel Pisa

There has been problems that for some paths that clock are not stopped
during new command programming and initiation. Result is issuing
of incorrect command to the card. Some other problems are cleaned too.
Noisy report of known ERRATUM #4 has been suppressed.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-19 21:48:03 +01:00
David Brownell
a020ed7521 [PATCH] SPI: busnum == 0 needs to work
We need to be able to have a "SPI bus 0" matching chip numbering; but
that number was wrongly used to flag dynamic allocation of a bus number.

This patch resolves that issue; now negative numbers trigger dynamic alloc.

It also updates the how-to-write-a-controller-driver overview to mention
this stuff.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-16 14:33:57 -07:00
David Brownell
ccf77cc4af [PATCH] SPI: devices can require LSB-first encodings
Add spi_device hook for LSB-first word encoding, and update all the
(in-tree) controller drivers to reject such devices.  Eventually,
some controller drivers will be updated to support lsb-first encodings
on the wire; no current drivers need this.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-16 14:33:57 -07:00
Kumar Gala
ff9f4771b5 [PATCH] SPI: Renamed bitbang_transfer_setup to spi_bitbang_setup_transfer and export it
Renamed bitbang_transfer_setup to follow convention of other exported symbols
from spi-bitbang.  Exported spi_bitbang_setup_transfer to allow users of
spi-bitbang to use the function in their own setup_transfer.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-16 14:33:57 -07:00
David Brownell
747d844ee9 [PATCH] SPI: spi whitespace fixes
This removes superfluous whitespace in the <linux/spi/spi.h> header.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-16 14:33:56 -07:00
Imre Deak
4cff33f94f [PATCH] SPI: per-transfer overrides for wordsize and clocking
Some protocols (like one for some bitmap displays) require different clock
speed or word size settings for each transfer in an SPI message. This adds
those parameters to struct spi_transfer.  They are to be used when they are
nonzero; otherwise the defaults from spi_device are to be used.

The patch also adds a setup_transfer callback to spi_bitbang, uses it for
messages that use those overrides, and implements it so that the pure
bitbanging code can help resolve any questions about how it should work.

Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-16 14:33:56 -07:00
Hua Zhong
e6333fd4dd [PATCH] fix can_share_swap_page() when !CONFIG_SWAP
can_share_swap_page() is used to check if the page has the last reference.
This avoids allocating a new page for COW if it's the last page.

However, if CONFIG_SWAP is not set, can_share_swap_page() is defined as 0,
thus always causes a copy for the last COW page.  The below simple patch
fixes it.

Signed-off-by: Hua Zhong <hzhong@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15 11:20:56 -07:00
Mike Kravetz
39d24e6426 [PATCH] add slab_is_available() routine for boot code
slab_is_available() indicates slab based allocators are available for use.
SPARSEMEM code needs to know this as it can be called at various times
during the boot process.

Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15 11:20:56 -07:00
Trent Piepho
5e37661389 [PATCH] symbol_put_addr() locks kernel
Even since a previous patch:

Fix race between CONFIG_DEBUG_SLABALLOC and modules
Sun, 27 Jun 2004 17:55:19 +0000 (17:55 +0000)
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/old-2.6-bkcvs.git;a=commit;h=92b3db26d31cf21b70e3c1eadc56c179506d8fbe

The function symbol_put_addr() will deadlock the kernel.

symbol_put_addr() would acquire modlist_lock, then while holding the lock call
two functions kernel_text_address() and module_text_address() which also try
to acquire the same lock.  This deadlocks the kernel of course.

This patch changes symbol_put_addr() to not acquire the modlist_lock, it
doesn't need it since it never looks at the module list directly.  Also, it
now uses core_kernel_text() instead of kernel_text_address().  The latter has
an additional check for addr inside a module, but we don't need to do that
since we call module_text_address() (the same function kernel_text_address
uses) ourselves.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Cc: Zwane Mwaikambo <zwane@fsmlabs.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15 11:20:55 -07:00
Heiko Carstens
986733e01d [PATCH] RCU: introduce rcu_needs_cpu() interface
With "Paul E. McKenney" <paulmck@us.ibm.com>

Introduce rcu_needs_cpu() interface.  This can be used to tell if there
will be a new rcu batch on a cpu soon by looking at the curlist pointer.
This can be used to avoid to enter a tickless idle state where the cpu
would miss that a new batch is ready when rcu_start_batch would be called
on a different cpu.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15 11:20:55 -07:00
Jeff Garzik
8d4ee71ff6 Merge branch 'max-sect' into upstream 2006-05-15 11:27:47 -04:00
Jeff Garzik
efa6e7e9d4 Merge branch 'for-jeff' of git://htj.dyndns.org/libata-tj into tejun-merge 2006-05-15 11:26:53 -04:00
Jeff Garzik
5006ecc2d5 Merge branch 'master' into upstream 2006-05-15 11:26:03 -04:00
Tejun Heo
a6e6ce8e8d [PATCH] libata-ncq: implement NCQ device configuration
Now that all NCQ related stuff are in place, implement NCQ device
configuration and bump ATA_MAX_QUEUE to 32 thus activating NCQ
support.

Original implementation is from Jens Axboe.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 21:03:48 +09:00
Tejun Heo
dedaf2b036 [PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper
Add ap->qc_active and ap->sactive, mask of all active qcs and libata's
view of the SActive register, respectively.  Also, implement
ata_qc_complete_multiple() which takes new qc_active mask and complete
multiple qcs according to the mask.

These will be used to track NCQ commands and complete them.  The
distinction between ap->qc_active and ap->sactive is also useful for
later PM implementation.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 21:03:43 +09:00
Tejun Heo
6cec4a3943 [PATCH] libata-ncq: rename ap->qactive to ap->qc_allocated
Rename ap->qactive to ap->qc_allocated.  This is to accomodate
addition of ap->qc_active, mask of active qcs.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 21:03:41 +09:00
Tejun Heo
88e490340e [PATCH] libata-ncq: add NCQ related ATA/libata constants and macros
Add NCQ related ATA/libata constants and macros.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 21:03:38 +09:00
Tejun Heo
12436c30f4 Merge branch 'irq-pio'
Conflicts:

	drivers/scsi/libata-core.c
	include/linux/libata.h
2006-05-15 20:59:15 +09:00
Tejun Heo
6d97dbd72d [PATCH] libata-eh: implement BMDMA EH
Implement stock BMDMA error handling methods.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:58:24 +09:00
Tejun Heo
022bdb075b [PATCH] libata-eh: implement new EH
Implement new EH.  The exported interface is ata_do_eh() which is to
be called from ->error_handler and performs the following steps to
recover the failed port.

ata_eh_autopsy() : analyze SError/TF, determine the cause of failure
		   and required recovery actions and record it in
		   ap->eh_context
ata_eh_report()	 : report the failure to user
ata_eh_recover() : perform recovery actions described in ap->eh_context
ata_eh_finish()	 : finish failed qcs

LLDDs can customize error handling by modifying eh_context before
calling ata_do_eh() or, if necessary, doing so inbetween each major
steps by calling each step explicitly.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:58:22 +09:00
Tejun Heo
f3e81b19aa [PATCH] libata-eh: implement ata_eh_info and ata_eh_context
struct ata_eh_info serves as the communication channel between
execution path and EH.  Execution path describes detected error
condition in ap->eh_info and EH recovers the port using it.  To avoid
missing error conditions detected during EH, EH makes its own copy of
eh_info and clears it on entry allowing error info to accumulate
during EH.

Most EH states including EH's copy of eh_info are stored in
ap->eh_context (struct ata_eh_context) which is owned by EH and thus
doesn't require any synchronization to access and alter.  This
standardized context makes it easy to integrate various parts of EH
and extend EH to handle multiple links (for PM).

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:58:21 +09:00
Tejun Heo
0c247c559c [PATCH] libata-eh: implement dev->ering
This patch implements ata_ering and uses it to define dev->ering.

ata_ering is a ring buffer which records libata errors - whether a
command was for normar IO request, err_mask and timestamp.  Errors are
recorded per-device in dev->ering.  This will be used by EH to
determine recovery actions.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:58:19 +09:00
Tejun Heo
9be1e979f2 [PATCH] libata-eh: add ATA and libata flags for new EH
Add ATA and libata flags to be used by new EH.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:58:17 +09:00
Tejun Heo
ad9e276244 [PATCH] libata-eh-fw: update ata_scsi_error() for new EH
Update ata_scsi_error() for new EH.  ata_scsi_error() is responsible
for claiming timed out qcs and invoking ->error_handler in safe and
synchronized manner.  As the state of the controller is unknown if a
qc has timed out, the port is frozen in such cases.

Note that ata_scsi_timed_out() isn't used for new EH.  This is because
a timed out qc cannot be claimed by EH without freezing the port and
freezing the port in ata_scsi_timed_out() results in unnecessary
abortion of other active qcs.  ata_scsi_timed_out() can be removed
once all drivers are converted to new EH.

While at it, add 'TODO: kill' comments to old EH functions.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:58:12 +09:00
Tejun Heo
e318049949 [PATCH] libata-eh-fw: implement freeze/thaw
Freezing is performed atomic w.r.t. host_set->lock and once frozen
LLDD is not allowed to access the port or any qc on it.  Also, libata
makes sure that no new qc gets issued to a frozen port.

A frozen port is thawed after a reset operation completes
successfully, so reset methods must do its job while the port is
frozen.  During initialization all ports get frozen before requesting
IRQ, so reset methods are always invoked on a frozen port.

Optional ->freeze and ->thaw operations notify LLDD that the port is
being frozen and thawed, respectively.  LLDD can disable/enable
hardware interrupt in these callbacks if the controller's IRQ mask can
be changed dynamically.  If the controller doesn't allow such
operation, LLDD can check for frozen state in the interrupt handler
and ack/clear interrupts unconditionally while frozen.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:58:09 +09:00