Commit Graph

71 Commits

Author SHA1 Message Date
Lachlan McIlroy
c734c79bc3 [XFS] Don't wait for pending I/Os when purging blocks beyond eof.
On last close of a file we purge blocks beyond eof. The same code is used
when we truncate the file size down. In this case we need to wait for any
pending I/Os for dirty pages beyond the new eof. For the last close case
we are not changing the file size and therefore do not need to wait for
any I/Os to complete. This fixes a performance bottleneck where writes
into the page cache and cache flushes can become mutually exclusive.

SGI-PV: 964002
SGI-Modid: xfs-linux-melb:xfs-kern:30220a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
2007-12-18 17:16:17 +11:00
Vlad Apostolov
859d718279 [XFS] get_bulkall() could return incorrect inode state
In the following scenario xfs_bulkstat() returns incorrect stale inode
state:

1. File_A is created and its inode synced to disk. 2. File_A is unlinked
and doesn't exist anymore. 3. Filesystem sync is invoked. 4. File_B is
created. File_B happens to reclaim File_A's inode. 5. xfs_bulkstat() is
called and detects File_B but reports the

incorrect File_A inode state.

Explanation for the incorrect inode state is that inodes are not
immediately synced on file create for performance reasons. This leaves the
on-disk inode buffer uninitialized (or with old state from a previous
generation inode) and this is what xfs_bulkstat() would report.

The patch marks the on-disk inode buffer "dirty" on unlink. When the inode
is reclaimed (by a new file create), xfs_bulkstat() would filter this
inode by the "dirty" mark. Once the inode is flushed to disk, the on-disk
buffer "dirty" mark is automatically removed and a following
xfs_bulkstat() would return the correct inode state.

Marking the on-disk inode buffer "dirty" on unlink is achieved by setting
the on-disk di_nlink field to 0. Note that the in-core di_nlink has
already been set to 0 and a corresponding transaction logged by
xfs_droplink(). This is an exception from the rule that any on-disk inode
buffer changes has to be followed by a disk write (inode flush).
Synchronizing the in-core to on-disk di_nlink values in advance (before
the actual inode flush to disk) should be fine in this case because the
inode is already unlinked and it would never change its di_nlink again for
this inode generation.

SGI-PV: 970842
SGI-Modid: xfs-linux-melb:xfs-kern:29757a

Signed-off-by: Vlad Apostolov <vapo@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Mark Goodwin <markgw@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 12:21:15 +10:00
Christoph Hellwig
bd186aa901 [XFS] kill the vfs_flags member in struct bhv_vfs
All flags are added to xfs_mount's m_flag instead. Note that the 32bit
inode flag was duplicated in both of them, but only cleared in the mount
when it was not nessecary due to the filesystem beeing small enough. Two
flags are still required here - one to indicate the mount option setting,
and one to indicate if it applies or not.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29507a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:45:57 +10:00
Christoph Hellwig
745f691912 [XFS] call common xfs vfs-level helpers directly and remove vfs operations
Also remove the now dead behavior code.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29505a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:44:08 +10:00
Christoph Hellwig
1543d79c45 [XFS] move v_trace from bhv_vnode to xfs_inode
struct bhv_vnode is on it's way out, so move the trace buffer to the XFS
inode. Note that this makes the tracing macros rather misnamed, but this
kind of fallout will be fixed up incrementally later on.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29498a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:39:25 +10:00
Christoph Hellwig
b677c210ce [XFS] move v_iocount from bhv_vnode to xfs_inode
struct bhv_vnode is on it's way out, so move the I/O count to the XFS
inode.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29497a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:38:56 +10:00
Christoph Hellwig
2f6f7b3d9b [XFS] kill v_vfsp member from struct bhv_vnode
We can easily get at the vfsp through the super_block but it will soon be
gone anyway.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29494a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:23:43 +10:00
Christoph Hellwig
739bfb2a7d [XFS] call common xfs vnode-level helpers directly and remove vnode operations
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29493a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 10:40:00 +10:00
David Chinner
da353b0d64 [XFS] Radix tree based inode caching
One of the perpetual scaling problems XFS has is indexing it's incore
inodes. We currently uses hashes and the default hash sizes chosen can
only ever be a tradeoff between memory consumption and the maximum
realistic size of the cache.

As a result, anyone who has millions of inodes cached on a filesystem
needs to tunes the size of the cache via the ihashsize mount option to
allow decent scalability with inode cache operations.

A further problem is the separate inode cluster hash, whose size is based
on the ihashsize but is smaller, and so under certain conditions (sparse
cluster cache population) this can become a limitation long before the
inode hash is causing issues.

The following patchset removes the inode hash and cluster hash and
replaces them with radix trees to avoid the scalability limitations of the
hashes. It also reduces the size of the inodes by 3 pointers....

SGI-PV: 969561
SGI-Modid: xfs-linux-melb:xfs-kern:29481a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15 16:50:50 +10:00
Christoph Hellwig
347d1c0195 [XFS] dinode endianess annotations
Biggest bit is duplicating the dinode structure so we have one annotated for
native endianess and one for disk endianess. The other significant change
is that xfs_xlate_dinode_core is split into one helper per direction to
allow for proper annotations, everything else is trivial.

As a sidenode splitting out the incore dinode means we can move it into
xfs_inode.h in a later patch and severely improving on the include hell in
xfs.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29476a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15 16:48:30 +10:00
Eric Sandeen
af3a2e8a3f [XFS] move linux/log2.h header to xfs_linux.h
Generally we try not to directly include linux header files in core xfs
code; xfs_linux.h is the spot for that.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29326a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15 16:40:46 +10:00
Christoph Hellwig
cd8b0a97bd [XFS] endianess annotations for xfs_bmbt_rec_t
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29321a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15 16:26:44 +10:00
Christoph Hellwig
a6f64d4aea [XFS] split ondisk vs incore versions of xfs_bmbt_rec_t
currently xfs_bmbt_rec_t is used both for ondisk extents as well as
host-endian ones. This patch adds a new xfs_bmbt_rec_host_t for the native
endian ones and cleans up the fallout. There have been various endianess
issues in the tracing / debug printf code that are fixed by this patch.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29318a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15 16:25:51 +10:00
Eric Sandeen
3a59c94c4b [XFS] Clean up function name handling in tracing code
Remove the hardcoded "fnames" for tracing, and just embed them in tracing
macros via __FUNCTION__. Kills a lot of #ifdefs too.

SGI-PV: 967353
SGI-Modid: xfs-linux-melb:xfs-kern:29099a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:41:24 +10:00
David Chinner
b11f94d537 [XFS] Quota inode has no parent.
Avoid using a special "zero inode" as the parent of the quota inode as
this can confuse the filestreams code into thinking the quota inode has a
parent. We do not want the quota inode to follow filestreams allocation
rules, so pass a NULL as the parent inode and detect this condition when
doing stream associations.

SGI-PV: 964469
SGI-Modid: xfs-linux-melb:xfs-kern:29098a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:41:12 +10:00
David Chinner
2a82b8be8a [XFS] Concurrent Multi-File Data Streams
In media spaces, video is often stored in a frame-per-file format. When
dealing with uncompressed realtime HD video streams in this format, it is
crucial that files do not get fragmented and that multiple files a placed
contiguously on disk.

When multiple streams are being ingested and played out at the same time,
it is critical that the filesystem does not cross the streams and
interleave them together as this creates seek and readahead cache miss
latency and prevents both ingest and playout from meeting frame rate
targets.

This patch set creates a "stream of files" concept into the allocator to
place all the data from a single stream contiguously on disk so that RAID
array readahead can be used effectively. Each additional stream gets
placed in different allocation groups within the filesystem, thereby
ensuring that we don't cross any streams. When an AG fills up, we select a
new AG for the stream that is not in use.

The core of the functionality is the stream tracking - each inode that we
create in a directory needs to be associated with the directories' stream.
Hence every time we create a file, we look up the directories' stream
object and associate the new file with that object.

Once we have a stream object for a file, we use the AG that the stream
object point to for allocations. If we can't allocate in that AG (e.g. it
is full) we move the entire stream to another AG. Other inodes in the same
stream are moved to the new AG on their next allocation (i.e. lazy
update).

Stream objects are kept in a cache and hold a reference on the inode.
Hence the inode cannot be reclaimed while there is an outstanding stream
reference. This means that on unlink we need to remove the stream
association and we also need to flush all the associations on certain
events that want to reclaim all unreferenced inodes (e.g. filesystem
freeze).

SGI-PV: 964469
SGI-Modid: xfs-linux-melb:xfs-kern:29096a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
2007-07-14 15:40:53 +10:00
Vignesh Babu
16a087d8e1 [XFS] Use is_power_of_2 instead of open coding checks
SGI-PV: 966576
SGI-Modid: xfs-linux-melb:xfs-kern:28950a

Signed-off-by: Vignesh Babu <vignesh.babu@wipro.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:37:12 +10:00
Lachlan McIlroy
ba87ea699e [XFS] Fix to prevent the notorious 'NULL files' problem after a crash.
The problem that has been addressed is that of synchronising updates of
the file size with writes that extend a file. Without the fix the update
of a file's size, as a result of a write beyond eof, is independent of
when the cached data is flushed to disk. Often the file size update would
be written to the filesystem log before the data is flushed to disk. When
a system crashes between these two events and the filesystem log is
replayed on mount the file's size will be set but since the contents never
made it to disk the file is full of holes. If some of the cached data was
flushed to disk then it may just be a section of the file at the end that
has holes.

There are existing fixes to help alleviate this problem, particularly in
the case where a file has been truncated, that force cached data to be
flushed to disk when the file is closed. If the system crashes while the
file(s) are still open then this flushing will never occur.

The fix that we have implemented is to introduce a second file size,
called the in-memory file size, that represents the current file size as
viewed by the user. The existing file size, called the on-disk file size,
is the one that get's written to the filesystem log and we only update it
when it is safe to do so. When we write to a file beyond eof we only
update the in- memory file size in the write operation. Later when the I/O
operation, that flushes the cached data to disk completes, an I/O
completion routine will update the on-disk file size. The on-disk file
size will be updated to the maximum offset of the I/O or to the value of
the in-memory file size if the I/O includes eof.

SGI-PV: 958522
SGI-Modid: xfs-linux-melb:xfs-kern:28322a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 13:49:46 +10:00
Lachlan McIlroy
d3cf209476 [XFS] propogate return codes from flush routines
This patch handles error return values in fs_flush_pages and
fs_flushinval_pages. It changes the prototype of fs_flushinval_pages so we
can propogate the errors and handle them at higher layers. I also modified
xfs_itruncate_start so that it could propogate the error further.

SGI-PV: 961990
SGI-Modid: xfs-linux-melb:xfs-kern:28231a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Stewart Smith <stewart@flamingspork.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 13:49:27 +10:00
Eric Sandeen
1c72bf9003 [XFS] The last argument "lsn" of xfs_trans_commit() is always called with
NULL.

Patch provided by Eric Sandeen.

SGI-PV: 961693
SGI-Modid: xfs-linux-melb:xfs-kern:28199a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 13:48:42 +10:00
Eric Sandeen
7bc5306d74 [XFS] Remove unused header files for MAC and CAP checking functionality.
xfs_mac.h and xfs_cap.h provide definitions and macros that aren't used
anywhere in XFS at all. They are left-overs from "to be implement at some
point in the future" functionality that Irix XFS has. If this
functionality ever goes into Linux, it will be provided at a different
layer, most likely through the security hooks in the kernel so we will
never need this functionality in XFS.

Patch provided by Eric Sandeen (sandeen@sandeen.net).

SGI-PV: 960895
SGI-Modid: xfs-linux-melb:xfs-kern:28036a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10 18:37:28 +11:00
Eric Sandeen
f7c99b6fc7 [XFS] Remove unused argument to xfs_bmap_finish
The firstblock argument to xfs_bmap_finish is not used by that function.
Remove it and cleanup the code a bit.

Patch provided by Eric Sandeen.

SGI-PV: 960196
SGI-Modid: xfs-linux-melb:xfs-kern:28034a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10 18:37:16 +11:00
Lachlan McIlroy
6816016137 [XFS] Fix callers of xfs_iozero() to zero the correct range.
The problem is the two callers of xfs_iozero() are rounding out the range
to be zeroed to the end of a fsb and in some cases this extends past the
new eof. The call to commit_write() in xfs_iozero() will cause the Linux
inode's file size to be set too high.

SGI-PV: 960788
SGI-Modid: xfs-linux-melb:xfs-kern:28013a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10 18:36:47 +11:00
David Chinner
f74eaf59b3 [XFS] Fix inode log item use-after-free on forced shutdown
SGI-PV: 959388
SGI-Modid: xfs-linux-melb:xfs-kern:27805a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10 18:36:04 +11:00
David Chinner
7989cb8ef5 [XFS] Keep stack usage down for 4k stacks by using noinline.
gcc-4.1 and more recent aggressively inline static functions which
increases XFS stack usage by ~15% in critical paths. Prevent this from
occurring by adding noinline to the STATIC definition.

Also uninline some functions that are too large to be inlined and were
causing problems with CONFIG_FORCED_INLINING=y.

Finally, clean up all the different users of inline, __inline and
__inline__ and put them under one STATIC_INLINE macro. For debug kernels
the STATIC_INLINE macro uninlines those functions.

SGI-PV: 957159
SGI-Modid: xfs-linux-melb:xfs-kern:27585a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: David Chatterton <chatz@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10 18:34:56 +11:00
David Chinner
e5ffd2bb62 [XFS] Stale the correct inode when freeing clusters.
SGI-PV: 958376
SGI-Modid: xfs-linux-melb:xfs-kern:27503a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-11-21 18:55:33 +11:00
David Chinner
4c60658e0f [XFS] Prevent a deadlock when xfslogd unpins inodes.
The previous fixes for the use after free in xfs_iunpin left a nasty log
deadlock when xfslogd unpinned the inode and dropped the last reference to
the inode. the ->clear_inode() method can issue transactions, and if the
log was full, the transaction could push on the log and get stuck trying
to push the inode it was currently unpinning.

To fix this, we provide xfs_iunpin a guarantee that it will always have a
valid xfs_inode <-> linux inode link or a particular flag will be set on
the inode. We then use log forces during lookup to ensure transactions are
completed before we recycle the inode. This ensures that xfs_iunpin will
never use the linux inode after it is being freed, and any lookup on an
inode on the reclaim list will wait until it is safe to attach a new linux
inode to the xfs inode.

SGI-PV: 956832
SGI-Modid: xfs-linux-melb:xfs-kern:27359a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Shailendra Tripathi <stripathi@agami.com>
Signed-off-by: Takenori Nagano <t-nagano@ah.jp.nec.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-11-11 18:05:00 +11:00
David Chinner
7a18c38607 [XFS] Clean up i_flags and i_flags_lock handling.
SGI-PV: 956832
SGI-Modid: xfs-linux-melb:xfs-kern:27358a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Nathan Scott <nscott@aconex.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-11-11 18:04:54 +11:00
David Chinner
f273ab848b [XFS] Really fix use after free in xfs_iunpin.
The previous attempts to fix the linux inode use-after-free in xfs_iunpin
simply made the problem harder to hit. We actually need complete exclusion
between xfs_reclaim and xfs_iunpin, as well as ensuring that the i_flags
are consistent during both of these functions. Introduce a new spinlock
for exclusion and the i_flags, and fix up xfs_iunpin to use igrab before
marking the inode dirty.

SGI-PV: 952967
SGI-Modid: xfs-linux-melb:xfs-kern:26964a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-09-28 11:06:03 +10:00
Nathan Scott
745b1f47fc [XFS] Remove last bulkstat false-positives with debug kernels.
SGI-PV: 953819
SGI-Modid: xfs-linux-melb:xfs-kern:26628a

Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-09-28 11:02:23 +10:00
Nathan Scott
41ff715abc [XFS] Ensure bulkstat from an invalid inode number gets caught always with
EINVAL.

SGI-PV: 953819
SGI-Modid: xfs-linux-melb:xfs-kern:26629a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-07-28 17:05:51 +10:00
Nathan Scott
6fdf8ccc09 [XFS] Rework code snippets slightly to remove remaining recent-gcc
warnings.

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26364a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-28 10:13:52 +10:00
Nathan Scott
f6c2d1fa63 [XFS] Remove version 1 directory code. Never functioned on Linux, just
pure bloat.

SGI-PV: 952969
SGI-Modid: xfs-linux-melb:xfs-kern:26251a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-20 13:04:51 +10:00
Al Viro
0d8fee3270 [XFS] Kill direct access to ->count in valusema(); all we ever use it for
is check if semaphore is actually locked, which can be trivially done in
portable way. Code gets more reabable, while we are at it... 

SGI-PV: 953915
SGI-Modid: xfs-linux-melb:xfs-kern:26274a

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-19 08:41:30 +10:00
Nathan Scott
4d1a2ed3d8 [XFS] Fix up debug code so that bulkstat wont generate thousands of
fsstress warnings.

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:26111a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 17:12:28 +10:00
Nathan Scott
a916e2bd15 [XFS] Remove unused parameter from di2xflags routine.
SGI-PV: 904192
SGI-Modid: xfs-linux-melb:xfs-kern:26110a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 17:12:17 +10:00
Nathan Scott
67fcaa73ad [XFS] Resolve a namespace collision on vnode/vnodeops for FreeBSD porters.
SGI-PV: 953338
SGI-Modid: xfs-linux-melb:xfs-kern:26107a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 17:00:52 +10:00
Nathan Scott
b83bd13881 [XFS] Resolve a namespace collision on vfs/vfsops for FreeBSD porters.
SGI-PV: 9533338
SGI-Modid: xfs-linux-melb:xfs-kern:26106a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 16:48:30 +10:00
Nathan Scott
b65745205f [XFS] Portability changes: remove prdev, stick to one diagnostic
interface.

SGI-PV: 953338
SGI-Modid: xfs-linux-melb:xfs-kern:26103a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 15:29:40 +10:00
Nathan Scott
7d04a335b6 [XFS] Shutdown the filesystem if all device paths have gone. Made
shutdown vop flags consistent with sync vop flags declarations too.

SGI-PV: 939911
SGI-Modid: xfs-linux-melb:xfs-kern:26096a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 14:58:38 +10:00
David Chinner
714250879e [XFS] Stop a BUG from occurring in generic_delete_inode by preventing
transaction completion from marking the inode dirty while it is being
cleaned up on it's way out of the system.

SGI-PV: 952967
SGI-Modid: xfs-linux-melb:xfs-kern:26040a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 14:55:52 +10:00
Barry Naujok
d3446eac3f [XFS] Add degframentation exclusion support
SGI-PV: 953061
SGI-Modid: xfs-linux-melb:xfs-kern:25986a

Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 14:54:19 +10:00
Mandy Kirkconnell
fe6c1e7240 [XFS] Fix size argument in kmem_free().
SGI-PV: 952291
SGI-Modid: xfs-linux-melb:xfs-kern:209807a

Signed-off-by: Mandy Kirkconnell <alkirkco@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 14:51:25 +10:00
Olaf Weber
3e57ecf640 [XFS] Add parameters to xfs_bmapi() and xfs_bunmapi() to have them report
the range spanned by modifications to the in-core extent map.  Add
XFS_BUNMAPI() and XFS_SWAP_EXTENTS() macros that call xfs_bunmapi() and
xfs_swap_extents() via the ioops vector. Change all calls that may modify
the in-core extent map for the data fork to go through the ioops vector. 
This allows a cache of extent map data to be kept in sync.

SGI-PV: 947615
SGI-Modid: xfs-linux-melb:xfs-kern:209226a

Signed-off-by: Olaf Weber <olaf@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 14:48:12 +10:00
David Chinner
58829e490e [XFS] Fix an inode use-after-free durin an unpin. When reclaiming inodes
that have been unlinked, we may need to execute transactions during
reclaim. By the time the transaction has hit the disk, the linux inode and
xfs vnode may already have been freed so we can't reference them safely.
Use the known xfs inode state to determine if it is safe to reference the
vnode and linux inode during the unpin operation.

SGI-PV: 946321
SGI-Modid: xfs-linux-melb:xfs-kern:25687a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-04-11 15:11:20 +10:00
Nathan Scott
c41564b5af [XFS] We really suck at spulling. Thanks to Chris Pascoe for fixing all
these typos.

SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:25539a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-29 08:55:14 +10:00
David Chinner
38e2299a64 [XFS] Explain the race closed by the addition of vn_iowait() to the start
of xfs_itruncate_start().

SGI-PV: 947420
SGI-Modid: xfs-linux-melb:xfs-kern:25527a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-22 12:47:15 +11:00
Yingping Lu
9fa8046f50 [XFS] Fixing the error caused by the conflict between DIO Write's
conversion and concurrent truncate operations. Use vn_iowait to wait for
the completion of any pending DIOs. Since the truncate requires exclusive
IOLOCK, so this blocks any further DIO operations since DIO write also
needs exclusive IOBLOCK. This serves as a barrier and prevent any
potential starvation.

SGI-PV: 947420
SGI-Modid: xfs-linux-melb:xfs-kern:208088a

Signed-off-by: Yingping Lu <yingping@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-22 12:44:35 +11:00
Yingping Lu
f1fdc848aa [XFS] Fixing KDB's xrwtrc command, also added the current process id into
the trace.

SGI-PV: 948300
SGI-Modid: xfs-linux-melb:xfs-kern:208069a

Signed-off-by: Yingping Lu <yingping@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-22 12:44:15 +11:00
Nathan Scott
3b244aa81e [XFS] endianess annotations for xfs_attr_shortform_t
SGI-PV: 943272
SGI-Modid: xfs-linux-melb:xfs-kern:25501a

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-17 17:29:25 +11:00