Commit Graph

172 Commits

Author SHA1 Message Date
Wolfram Sang
c44e182e53 ARM: shmobile: convert to SPDX identifier
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-06-18 12:00:29 +02:00
Doug Berger
56e4446df9 ARM: brcmstb: Add support for the V7 memory map
The 7278 device is the first device that includes support for the V7
memory map developed for use in 64-bit architecture brcmstb devices.
This map relocates the register physical offset from 0xF0000000 to
0x0000000008000000.

Since the ARM PERIPHBASE value is also relocated in the V7 memory map
we can use its value to determine whether this device uses the new
V7 memory map and therefore where to look for the SUN_TOP_CTRL
register used to identify the chip family.

Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-05-09 12:14:42 -07:00
Krzysztof Kozlowski
f947153f92 ARM: EXYNOS: Add SPDX license identifiers
Replace GPL license statements with SPDX GPL-2.0 and GPL-2.0+ license
identifiers.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-02-12 19:55:21 +01:00
Linus Torvalds
8c60969856 ARM: SoC platform updates for 4.15
Most of the commits are for defconfig changes, to enable newly added
 drivers or features that people have started using. For the changed
 lines lines, we have mostly cleanups, the affected platforms are
 OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.
 
 The largest single change is the introduction of the TI "sysc" bus
 driver, with the intention of cleaning up more legacy code.
 
 Two new SoC platforms get added this time:
 - Allwinner R40 is a modernized version of the A20 chip, now
   with a Quad-Core ARM Cortex-A7. According to the manufacturer,
   it is intended for "Smart Hardware"
 - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family
   of chips meant for managed gigabit ethernet switches, based
   around a Cortex-A9 CPU.
 
 Finally, we gain SMP support for two platforms: Renesas R-Car E2
 and Amlogic Meson8/8b, which were previously added but only supported
 uniprocessor operation.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaDgf/AAoJEGCrR//JCVIntcMQAKI2q0Dr2giWtKSoH9GDh5co
 137MamTj1YExIcmtbDVO22jV4WSKhIduo+rRBYmQ/uvrkUe9tf7I172JeAIzMzGf
 HGYJ6fxpaEMUAbUlNcjuXJc7jQXNKLBK2X9CMuwXX3X3HddxKkL38D1d/Mxv5RGu
 G1pEe0j734Qio9LpACnb0xnluwyUBJOYNwo7Agj5RWzOrXZ+TdwkiIW0JdQiG7Z5
 wabzDa7OW1maB+hVYMAM3wHcqO7DKEvGvjYLRoT12cnOLXq7BNbXqXFufuMUNmNE
 ABhWA1h9SYrXT3n5pQLwoonvvTsI7KXCefrZ0wuxbjrdD4yGW1gmgpRee9RfoggD
 A6/62wpmSS61X5QWC6BLEa5v/o5NKewndyWhnjLllgJX8sRUbnPQa/xKv7ngdlN5
 7YL5HWoNpMQv7fEweSc6j5l/F3yRBndn9TpeKiqCiUiNDrIGlZYhYKIcr9rGESFk
 pu2KgK+e9+1k7F4s7LotsA65Q5bZIMveyyVtx0XHXz1G4O8NksoQCLJ3wcqQ2pzI
 WpyOO5R1CNltPhKGC7EP3OZcIMlCtCnsNcedb/AGHgPS+ert2UxBnlSeSMBQlLZY
 4fDwEAlA1qx9PuG9N3xrK/gAFiFLafK2sNxtVc7NSmXkkdm3xgJ95Y9sa72Y2qNO
 rU2LL8SM7cOwhXHrlEFB
 =jlJ2
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "Most of the commits are for defconfig changes, to enable newly added
  drivers or features that people have started using. For the changed
  lines lines, we have mostly cleanups, the affected platforms are OMAP,
  Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.

  The largest single change is the introduction of the TI "sysc" bus
  driver, with the intention of cleaning up more legacy code.

  Two new SoC platforms get added this time:

   - Allwinner R40 is a modernized version of the A20 chip, now with a
     Quad-Core ARM Cortex-A7. According to the manufacturer, it is
     intended for "Smart Hardware"

   - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of
     chips meant for managed gigabit ethernet switches, based around a
     Cortex-A9 CPU.

  Finally, we gain SMP support for two platforms: Renesas R-Car E2 and
  Amlogic Meson8/8b, which were previously added but only supported
  uniprocessor operation"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
  ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module
  ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER
  arm64: defconfig: enable CONFIG_GPIO_UNIPHIER
  ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b
  ARM: meson: Add SMP bringup code for Meson8 and Meson8b
  ARM: smp_scu: allow the platform code to read the SCU CPU status
  ARM: smp_scu: add a helper for powering on a specific CPU
  dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation
  ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init()
  ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init()
  ARM: defconfig: select the right SX150X driver
  arm64: defconfig: Enable QCOM_IOMMU
  arm64: Add ThunderX drivers to defconfig
  arm64: defconfig: Enable Tegra PCI controller
  cpufreq: imx6q: Move speed grading check to cpufreq driver
  arm64: defconfig: re-enable Qualcomm DB410c USB
  ARM: configs: stm32: Add MDMA support in STM32 defconfig
  ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1
  bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
  bus: ti-sysc: mark PM functions as __maybe_unused
  ...
2017-11-16 14:05:12 -08:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Florian Fainelli
c149635215 ARM: brcmstb: Add appropriate ARM_BE8() macros for swapping
Building a big-endian kernel for ARCH_BRCMSTB revealed that we would not
be correctly polling for the right bit in the busyuart macro, turns out
there are a few transformations needed to work with big-endian kernels.
First we need to swap the value we read from SUN_TOP_CTRL to properly
compare it against our local tables. Then, just like 8250.S we need to
swap the value before storing it, and conversely swap it after a load.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-09-25 11:56:04 -07:00
Linus Torvalds
8fac2f96ab Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
 "Low priority fixes and updates for ARM:

   - add some missing includes

   - efficiency improvements in system call entry code when tracing is
     enabled

   - ensure ARMv6+ is always built as EABI

   - export save_stack_trace_tsk()

   - fix fatal signal handling during mm fault

   - build translation table base address register from scratch

   - appropriately align the .data section to a word boundary where we
     rely on that data being word aligned"

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8691/1: Export save_stack_trace_tsk()
  ARM: 8692/1: mm: abort uaccess retries upon fatal signal
  ARM: 8690/1: lpae: build TTB control register value from scratch in v7_ttb_setup
  ARM: align .data section
  ARM: always enable AEABI for ARMv6+
  ARM: avoid saving and restoring registers unnecessarily
  ARM: move PC value into r9
  ARM: obtain thread info structure later
  ARM: use aliases for registers in entry-common
  ARM: 8689/1: scu: add missing errno include
  ARM: 8688/1: pm: add missing types include
2017-09-12 06:10:44 -07:00
Russell King
1abd350237 ARM: align .data section
Robert Jarzmik reports that his PXA25x system fails to boot with 4.12,
failing at __flush_whole_cache in arch/arm/mm/proc-xscale.S:215:

   0xc0019e20 <+0>:     ldr     r1, [pc, #788]
   0xc0019e24 <+4>:     ldr     r0, [r1]	<== here

with r1 containing 0xc06f82cd, which is the address of "clean_addr".
Examination of the System.map shows:

c06f22c8 D user_pmd_table
c06f22cc d __warned.19178
c06f22cd d clean_addr

indicating that a .data.unlikely section has appeared just before the
.data section from proc-xscale.S.  According to objdump -h, it appears
that our assembly files default their .data alignment to 2**0, which
is bad news if the preceding .data section size is not power-of-2
aligned at link time.

Add the appropriate .align directives to all assembly files in arch/arm
that are missing them where we require an appropriate alignment.

Reported-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-08-14 16:22:55 +01:00
Tony Lindgren
51ef70037e ARM: debug: Use generic 8250 debug_ll for am3517 and am335x
We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS
working and to simplify the code. The old debug_ll code is no longer
needed and the machine ID based detection is no longer used.

Note that for most part there's no need to keep DEBUG_LL enabled.
We now have CONFIG_SERIAL_EARLYCON working very early as long as
the kernel cmdline has "earlycon" in it and the board specific dts
file has chosen configured with with the port using stdout-path.

Cc: Hoeun Ryu <hoeun.ryu@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-17 00:53:42 -07:00
Tony Lindgren
2d1f7d2e24 ARM: debug: Use generic 8250 debug_ll for ti81xx
We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS
working and to simplify the code. The old debug_ll code is no longer
needed and the machine ID based detection is no longer used.

Note that for most part there's no need to keep DEBUG_LL enabled.
We now have CONFIG_SERIAL_EARLYCON working very early as long as
the kernel cmdline has "earlycon" in it and the board specific dts
file has chosen configured with with the port using stdout-path.

Cc: Hoeun Ryu <hoeun.ryu@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-17 00:51:46 -07:00
Tony Lindgren
fc23beb8a5 ARM: debug: Use generic 8250 debug_ll for omap3/4/5
We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS
working and to simplify the code. The old debug_ll code is no longer
needed and the machine ID based detection is no longer used.

Note that for most part there's no need to keep DEBUG_LL enabled.
We now have CONFIG_SERIAL_EARLYCON working very early as long as
the kernel cmdline has "earlycon" in it and the board specific dts
file has chosen configured with with the port using stdout-path.

Cc: Hoeun Ryu <hoeun.ryu@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-17 00:49:08 -07:00
Tony Lindgren
d2b310b023 ARM: debug: Use generic 8250 debug_ll for omap2 and omap3/4/5 common uarts
We want to use generic 8250 debug_ll code to get DEBUG_UNCOMPRESS
working and to simplify the code. The old debug_ll code is no longer
needed and the machine ID based detection is no longer used.

Note that for most part there's no need to keep DEBUG_LL enabled.
We now have CONFIG_SERIAL_EARLYCON working very early as long as
the kernel cmdline has "earlycon" in it and the board specific dts
file has chosen configured with with the port using stdout-path.

Cc: Hoeun Ryu <hoeun.ryu@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-07-17 00:35:39 -07:00
Florian Fainelli
d47b51ad31 ARM: brcmstb: Add entry for 7260
BCM7260 has the same UART base address as 7268, order the entries by
ascending chip number and alias the 7268 definition to the 7260
definition.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-03-15 14:57:50 -07:00
Florian Fainelli
d0cf9d8a3c ARM: brcmstb: Add earlyprintk support using run-time checks
The SUN_TOP_CTRL_FAMILY_ID register  is at a fixed absolute address for
all of our supported chips, so utilize its value to determine what the
UARTA base address should be based on the value we read.

Since the code is called both during decompressor when the MMU is off,
and after the MMU has been turned on in the kernel, and we want to do
the lookup only once, we use the same technique as tegra.S and have a
shared storage location between the decompressor and the kernel.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-08-08 11:14:09 -07:00
Alexander Shiyan
32981ea5b9 ARM: clps711x: Reduce static map size
Last CLPS711X CPU register is PLLR has 0xa5a8 address, so we can reduce
the map to 48k and align the end of the static at VMALLOC_START.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-07-06 17:38:52 +02:00
Olof Johansson
553228d073 Samsung mach/soc update for v4.8, part 2:
1. Endian-friendly fixes.
 2. Maintainers update.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXdL7uAAoJEME3ZuaGi4PX9E0P/2XqWeRT2Ln1hrySGefz1zN+
 xIW7bsYaHWiFp0/ol4uWdDcyKTyN+Y8ROcsJmdnPjXrPRb/7Vicg9bMj4KziQGtG
 uQBJ7vu1sInf6ocMv0JaXagGiN9UbegXrJ/+HrS41NeQ4le75i//QleKppgY5cJ9
 1ymXfeKLPYAtuL7jVXh7+kvMEtrTpbH6JiIwSHk3pLUsxhTkiMI2nIcoe/NTGxkL
 Dr1yvtcXwOcWT8Bkn4cyb+hOculqwnc2jTvfUeWhqDEtGqAn8YJDFhMfJNxGd7bt
 EafSWVbdhG0KEOIvTSrHk7qek6exLXl9Kx5P0yRyE4D3/+CyO9Ya2rRi5WlGrGHI
 w9TSOoPzqHYt3aZ1XAY66yYhgfsaIk6TxbGaPtPjt1nZ6E86KqnK0821CF1HZiRL
 ySp2lO7PlGPtqNT9cVwZDSVBgeoYDhkiQUIQnJwAKauCZirmS6TRordnbBKU39SW
 bLUKzSFKHnPBa/u4NOJhflWIy4fg4ARJYDycCH7m/P01JvxNb4OJ6ycz/XeO90oS
 k1HKXOFjFNbklloC/sjyLRP71+ZkJuogH6uzYwuhShwRKyCXdfoI4yLS024mGejM
 u5r6MGVVKI9ZxZ9ImK8gfhgQ705AfxkhKFHu9BjHCLIsLg/F+PgdiNObI9FoA7Ym
 6sgq5xOhnhjjGaENvHFD
 =/T5k
 -----END PGP SIGNATURE-----

Merge tag 'samsung-soc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Samsung mach/soc update for v4.8, part 2:
1. Endian-friendly fixes.
2. Maintainers update.

* tag 'samsung-soc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  MAINTAINERS: Extend Samsung SoC entry with S3C/S5P drivers
  ARM: SAMSUNG: Fix missing s5p_init_cpu() declaration
  ARM: EXYNOS: Fix UART address selection for DEBUG_LL
  ARM: EXYNOS: Fixup for __raw operations in suspend.c
  ARM: SAMSUNG: Fixup usage of __raw IO in PM
  ARM: EXYNOS: Fixup endian in pm/pmu
  ARM: EXYNOS: Fixups for big-endian operation
  ARM: SAMSUNG: Fixup endian issues in CPU detection
  ARM: EXYNOS: Fixup debug macros for big-endian
  ARM: s3c24xx: Sort cpufreq tables
  ARM: SAMSUNG: Fix typos

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-07-05 22:41:01 -07:00
Joonyoung Shim
2f3428b5cf ARM: EXYNOS: Fix UART address selection for DEBUG_LL
The Exynos542x SoCs using A15+A7 can boot to A15 or A7. If it boots using
A7 (like on Odroid XU family boards), it can't choose right UART
physical address only the part number of CP15. Fix the detection logic
by checking the Cluster ID additionally.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
[k.kozlowski: Extend commit message]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-06-22 08:20:43 +02:00
Ben Dooks
4fdfa8623d ARM: EXYNOS: Fixup debug macros for big-endian
The exynos low-level debug macros need to be fixed if the system is being
built big endian. Add the necessary endian swaps for accessing the registers
to get output working again

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-06-21 13:08:09 +02:00
Alexandre Belloni
0b37e9e8dc ARM: at91: debug: use DEBUG_UART_VIRT
AT91 still uses an offset (0x0100 0000) from the physical address to map
the debug UART. This is unfortunate as for some platforms (sama5d3 and
earlier), it ends up in the PCI zone and PCI is enabled in multi_v7.
Switch to DEBUG_UART_VIRT to solve that.

Tested on sama5d3 and 9g20.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-10 17:08:56 +02:00
Arnd Bergmann
f3a186fbfd The i.MX SoC update for 4.6:
- Enable big endian mode support for i.MX platform
 - Add support for i.MX6QP SoC which is the latest i.MX6 family addition
 - Add basic suspend/resume support for i.MX25
 - A couple of i.MX7D support updates
 - A few random code cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJW1Z/XAAoJEFBXWFqHsHzOfUEH/1oiBDMBJEKH8/vmipV5cPmw
 TAcK4W/1mS0SZo8xSYyi0iGcs5loA7fiypBZv6tKxI2IZS1w3sbJ0eHeeUUkURsG
 okMpHCMeuEdjnWH/nTdABKGIlK1nAtwuDuD0BJqlk1VDLY/pIUY5kkoWsrXMlzwO
 VkS2ic90HjsijmLH5y38kgo6RvkDDBxMzl8lzTxwfMNO8P5zCn9Wiqeerlbt/+Nw
 +n8aDzow4XKuOaHaoh6/C9RSKkobCAs/RVwoYUhv4QCk1zC6rJ1Oq6yuYGJgiIOX
 +gtdAIxTVv4RDJfEWEMT+N9SFM4qcFDAGtGPoXZyRKeedC5/xXuD2yNn2RUzShc=
 =RoB/
 -----END PGP SIGNATURE-----

Merge tag 'imx-soc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

Merge "i.MX SoC update for 4.6" from Shawn Guo:

- Enable big endian mode support for i.MX platform
- Add support for i.MX6QP SoC which is the latest i.MX6 family addition
- Add basic suspend/resume support for i.MX25
- A couple of i.MX7D support updates
- A few random code cleanups

* tag 'imx-soc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: Make reset_control_ops const
  ARM: imx: Do L2 errata only if the L2 cache isn't enabled
  ARM: imx: select ARM_CPU_SUSPEND only for imx6
  ARM: mx25: Add basic suspend/resume support
  ARM: imx: Add msl code support for imx6qp
  ARM: imx: enable big endian mode
  ARM: imx: use endian-safe readl/readw/writel/writew
  ARM: imx7d: correct chip version information
  ARM: imx: select HAVE_ARM_ARCH_TIMER if selected i.MX7D
  ARM: imx6: fix cleanup path in imx6q_suspend_init()
2016-03-02 23:30:17 +01:00
Arnd Bergmann
e91fb3bd75 ARM: at91: avoid defining CONFIG_* symbols in source code
In an invalid randconfig build (fixed by another patch),
I ran across this warning:

arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror]
 #define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)

As Russell pointed out, we should never #define a macro starting
with CONFIG_ in a source file, as that is rather confusing.

This renames the macro to avoid the symbol clash.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-02 17:31:08 +01:00
Arnd Bergmann
e7ada8dfd5 arm: Xilinx Zynq patches for v4.6
- SLCR early init
 - Fix L2 cache data corruption
 - Fix early printk uart setting
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlbO/kIACgkQykllyylKDCE55wCdEI40Q6+gUEa4ZEH2Pkl2LqK7
 e/oAn23veiR4MaMZb3jKVLp1Lzt83x1B
 =qI6y
 -----END PGP SIGNATURE-----

Merge tag 'zynq-soc-for-4.6' of https://github.com/Xilinx/linux-xlnx into next/soc

Merge "ARM: Xilinx Zynq patches for v4.6" from Michal Simek:

- SLCR early init
- Fix L2 cache data corruption
- Fix early printk uart setting

* tag 'zynq-soc-for-4.6' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: Move early printk virtual address to vmalloc area
  ARM: zynq: address L2 cache data corruption
  ARM: zynq: initialize slcr mapping earlier
2016-02-26 22:54:53 +01:00
Michal Simek
8fff2f752f ARM: zynq: Move early printk virtual address to vmalloc area
The patch
"ARM: 8432/1: move VMALLOC_END from 0xff000000 to 0xff800000"
(sha1: 6ff0966052)
has moved also start of VMALLOC area because size didn't change.
That's why origin location of vmalloc was
   vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
and now is
   vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)

That's why uart virtual addresses need to be changed to reflect this new
memory setup. Starting address should be vmalloc start address.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2016-02-25 14:06:03 +01:00
Mans Rullgard
0c5325466d ARM: debug: add support for Palmchip BK-310x UART
Some SoCs use a Palmchip BK-310x UART which is mostly 16550 compatible
but with a different register layout. While this UART has previously
only been supported in MIPS based chips (Alchemy, Ralink), the ARM based
SMP87xx series from Sigma Designs also uses it.

This patch allows the debug console to work with this type of UART.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-08 13:52:34 -08:00
Johannes Berg
26e30c6489 ARM: imx: enable big endian mode
Enable ARM big-endian mode on mach-imx. This requires adding some
byte swapping in the debug functions (which otherwise hang forever)
and of course the secondary core bringup.

Tested (on top of 4.4) on i.MX6 HummingBoard quad-core (IMX6Q).

The patch is pretty much as suggested by Arnd Bergmann, thanks!

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-02 13:31:19 +08:00
Arnd Bergmann
0045c0dd2f ARM: debug-ll: rework footbridge handling
Footbridge has two debug ports that are handled a bit differently:

The 8250 port uses the normal debug/8250.S implementation that is shared
with a lot of other platforms, but it relies on the DEBUG_UART_8250
option to be turned on automatically instead of being selected by
DEBUG_FOOTBRIDGE_COM1 as we do for most other platforms. I'm changing
this to use a 'select' and change the dependency to the debug symbol
rather than the platform symbol for consistency.

The DC21285 UART has a separate top-level option, and relies on
the traditional include/mach/debug-macro.S method. With the s3c64xx
multiplatform series queued up for 4.5, it is now the last one that does
this, so by moving this file to include/debug/dc21285.S, we can get
all platforms to do things the same way.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-15 23:43:29 +01:00
Alexandre Belloni
6f112a08c1 ARM: at91: debug: use DEBUG_UART_PHYS
Instead of having to add a new configuration option each time support for
new SoC is added, use CONFIG_DEBUG_UART_PHYS. For now,
CONFIG_DEBUG_UART_VIRT is automatically computed.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-09-21 16:31:15 +02:00
Olof Johansson
207b504a63 The i.MX SoC changes for 4.3:
- Add i.MX6 Ultralite SoC support, which is the newest addition to
    i.MX6 family.  It integrates a single Cortex-A7 core and a power
    management module that reduces the complexity of external power
    supply and simplifies power sequencing.
  - Change SNVS RTC driver to use syscon interface for register access,
    and add SNVS power key driver support.
  - Add a second clock for mxc rtc driver, and support device tree probe
    for the driver.
  - Add FEC MAC reference clock and phy fixup initialization for i.MX6UL
    platform.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVyg8nAAoJEFBXWFqHsHzOQC8H/iY+cdNfAWIxYmt2CeF607su
 fLaycUSUPqPAERUTcHpjKyiKkRg2NWV7vFVWCkKaQ3RZ+IW6xNntkqMxzocS1sh2
 +70Ckp+B0orGuo96PkEXua9fNPf8/yaGiDhuJpK966VRRSSXRD15uOuqHAJ2Jz/v
 HEnEm3KANSSYS1heEJRqiiCsqhADRWl2RzgfV327aXtScP9zXlbJGlEc/jUVAY65
 wbqjsXdySeS3rECNMAYXnPU7IlK4NkRqrOi1JmTJCBlXqV2b6dBfjgIu9jOa91UG
 yRj7IEBJemqT4Ap1ee2NR3H1lDngt2JKg9XqRDL3j9alYvhAWGvhSY2UH2iPrFg=
 =emep
 -----END PGP SIGNATURE-----

Merge tag 'imx-soc-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

The i.MX SoC changes for 4.3:
 - Add i.MX6 Ultralite SoC support, which is the newest addition to
   i.MX6 family.  It integrates a single Cortex-A7 core and a power
   management module that reduces the complexity of external power
   supply and simplifies power sequencing.
 - Change SNVS RTC driver to use syscon interface for register access,
   and add SNVS power key driver support.
 - Add a second clock for mxc rtc driver, and support device tree probe
   for the driver.
 - Add FEC MAC reference clock and phy fixup initialization for i.MX6UL
   platform.

* tag 'imx-soc-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  rtc: snvs: select option REGMAP_MMIO
  ARM: imx6ul: add fec MAC refrence clock and phy fixup init
  ARM: imx6ul: add fec bits to GPR syscon definition
  rtc: mxc: add support of device tree
  dt-binding: document the binding for mxc rtc
  rtc: mxc: use a second rtc clock
  input: snvs_pwrkey: use "wakeup-source" as deivce tree property name
  Document: devicetree: input: imx: i.mx snvs power device tree bindings
  input: keyboard: imx: add snvs power key driver
  Document: dt: fsl: snvs: change support syscon
  rtc: snvs: use syscon to access register
  ARM: imx: add low-level debug support for i.mx6ul
  ARM: imx: add i.mx6ul msl support

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-18 13:10:05 -07:00
Olof Johansson
b69354dfe2 arm: Xilinx Zynq SoC patches for v4.2
- Fix earlyprintk, jump trampoline for SMP
 - Update git tree location
 - Setup PL310 aux (bit 22)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iEYEABECAAYFAlW7MWAACgkQykllyylKDCHkTACfT3Kzs+Cl7jc9A4kQ6dkbUqtC
 E1MAn0g3yHcqGHgUtfyHu6lXtptJFbDn
 =DuTZ
 -----END PGP SIGNATURE-----

Merge tag 'zynq-soc-for-4.3' of https://github.com/Xilinx/linux-xlnx into next/soc

arm: Xilinx Zynq SoC patches for v4.2

- Fix earlyprintk, jump trampoline for SMP
- Update git tree location
- Setup PL310 aux (bit 22)

* tag 'zynq-soc-for-4.3' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: reserve space for jump target in secondary trampoline
  clk: zynq: remove redundant $(CONFIG_ARCH_ZYNQ) in Makefile
  MAINTAINERS: Update Zynq git tree location
  ARM: zynq: Set bit 22 in PL310 AuxCtrl register (6395/1)
  ARM: zynq: Fix earlyprintk in big endian mode

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-05 10:53:52 +02:00
Nicolas Ferre
c268a74310 ARM: at91/soc: add basic support for new sama5d2 SoC
Add Kconfig entries, header file changes and addition to the documentation.
The early debug infrastructure is also added for easy development.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-05 10:40:21 +02:00
Arun Chandran
974a2aba99 ARM: zynq: Fix earlyprintk in big endian mode
earlyprintk messages are not appearing on the terminal
emulator during a big endian kernel boot. In BE mode
sending full words to UART will result in unprintable
characters as they are byte swapped versions of printable
ones. So send only bytes.

Signed-off-by: Arun Chandran <achandran@mvista.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-22 09:37:58 +02:00
Anson Huang
20c305f660 ARM: imx: add low-level debug support for i.mx6ul
Enable low-level debug support for i.MX6UL by adding the
debug port definitions for the SoC.

Singed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-07-14 15:06:19 +08:00
Kevin Hilman
3e0d0b81ea The i.MX SoC updates for 4.2:
- Add new SoC i.MX7D support, which integrates two Cortex-A7 and one
    Cortex-M4 cores.
  - Support suspend from IRAM on i.MX53, so that DDR pins can be set to
    high impedance for more power saving during suspend.
  - Move i.MX clock drivers from arch/arm/mach-imx to drivers/clk/imx.
  - Move i.MX GPT timer driver from arch/arm/mach-imx into
    drivers/clocksource.
  - A couple of clock driver update for VF610 and i.MX6Q.
  - A few random code correction and improvement.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVb7grAAoJEFBXWFqHsHzOWS0H/RXV1UjvsJTfK8+KR2SGY5QO
 3hU4YQYpnkukG2OtxAaWKXzIh+xeINqJ02cws/zyEfVZFsZp/i5Z7EM5811qQeNC
 f9uCtFCNynTnWjUP9YXELgAX3/DPHMr+Em5QGOWwh+311YypJyP7CttsJvmjJIUN
 qGYXdpy2xhqKgSGrnI+dhpxTdhtm/jmsggoM8qqi2aYB3c3rnWCc6QSBMR8oxFKB
 Tmxd/cc/6Pvbp7W+AztTb/z8UD21UJkn96FhUb9563HKjf7kvbP4ydJTwhBxfyQu
 YxE4kkejrnVNaUl1Tkqmf7rTgLKaU92nrLCuBDI/91OET+GQtq2R5fE8iMPs29k=
 =c254
 -----END PGP SIGNATURE-----

Merge tag 'imx-soc-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

The i.MX SoC updates for 4.2:
 - Add new SoC i.MX7D support, which integrates two Cortex-A7 and one
   Cortex-M4 cores.
 - Support suspend from IRAM on i.MX53, so that DDR pins can be set to
   high impedance for more power saving during suspend.
 - Move i.MX clock drivers from arch/arm/mach-imx to drivers/clk/imx.
 - Move i.MX GPT timer driver from arch/arm/mach-imx into
   drivers/clocksource.
 - A couple of clock driver update for VF610 and i.MX6Q.
 - A few random code correction and improvement.

* tag 'imx-soc-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (44 commits)
  ARM: imx: imx7d requires anatop
  clocksource: timer-imx-gpt: remove include of <asm/mach/time.h>
  ARM: imx: move timer driver into drivers/clocksource
  ARM: imx: remove platform headers from timer driver
  ARM: imx: provide gpt device specific irq functions
  ARM: imx: get rid of variable timer_base
  ARM: imx: define gpt register offset per device type
  ARM: imx: move clock event variables into imx_timer
  ARM: imx: set up .set_next_event hook via imx_gpt_data
  ARM: imx: setup tctl register in device specific function
  ARM: imx: initialize gpt device type for DT boot
  ARM: imx: define an enum for gpt timer device type
  ARM: imx: move timer resources into a structure
  ARM: imx: use relaxed IO accessor in timer driver
  ARM: imx: make imx51/3 suspend optional
  ARM: clk-imx6q: refine sata's parent
  ARM: imx: clk-v610: Add clock for I2C2 and I2C3
  ARM: mach-imx: iomux-imx31: Use DECLARE_BITMAP
  ARM: imx: add imx7d clk tree support
  ARM: clk: imx: update pllv3 to support imx7
  ...

 Conflicts:
	arch/arm/mach-imx/Kconfig
2015-06-10 16:58:05 -07:00
Anson Huang
52d7aec2b8 ARM: imx7d: add low level debug uart support
Add low level uart debug support for imx7d

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Bai Ping <b51503@freescale.com>
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:35 +08:00
Stefan Agner
7505f0428f ARM: unify MMU/!MMU addruart calls
Remove the needless differences between MMU/!MMU addruart calls.
This allows to use the same addruart macro on SoC level. Useful
for SoC consisting of multiple CPUs with and without MMU such as
Freescale Vybrid.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-20 23:09:51 +02:00
Jun Nie
58d0398535 ARM: zx: add low level debug support for zx296702
Use the UART0 peripheral for low level debug. Only the UART port 0 is
currently supported.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-15 21:49:27 +02:00
Ben Dooks
6ef4e47926 ARM: debug: fix big endian operation for 8250 word mode
If the 8250 debug code is used in word mode on an big endian
host then the writes need to be change into little endian for
the bus.

Note, we have to re-convert the value back as the debug code
will inspect the value after writing it to see if a newline
has been written.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-05-11 13:59:23 -05:00
Olof Johansson
5602d12a86 General cleanups for MSM/QCOM for 4.1
* Removal of mach-msm and associated drivers cleanups that have been
   ack'd by associated maintainers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 Comment: GPGTools - https://gpgtools.org
 
 iQIcBAABCgAGBQJVFYYJAAoJEF9hYXeAcXzBqZkQAOnZShQ3iLgo5Btn0wGLMN2X
 AiUqztk0iHV+R94ahpAmkCF5iYUYWotViacGZ7JA+8TVef1m1JosTKzjswS0736l
 copG345v4JijBMVks6Jg5HX6MZZqmIKZKyBNhIqYl8dA84NRClno6La3iwjbLsDv
 9suavM3ylgUTFpJdXZynz0AhOlbFeiUTYXYCPgSu6OSjYSs1JYcyGo/4cnaviR6w
 WkkAnlgplx9qTCPGwuPvGLlFL632kezIERwElUEoSNz7GavR3rFwLlyOfToQyjMU
 t6mTlVKwVvdS0dLSCAN076XxTpbPpaRlnH+0Ij1F6dhaPDjdJ+7I+TOMYidrgfbE
 exNLftXFdT05pt2e/ThRPJWsS6y2SuOhxqvjwRwsQs1ozSt5s9t9w/Jrb4kShbaC
 gcbjqKw+tFijzgF+KGz9aQ84gLTyxaFMd120o/JDXscgodeXZWSUrPoWLt1ilKlN
 9gwA26cOF/vLOUUM1qCGG/gTHPOfFVObj0DbW43PqKhYdrpHBBRbLxf8zF0w1fmQ
 vLq8nNuY84hViJLuDb2lXnM1Z1yH5QAXm2mh7uMU3z7W4sDM8e2U3e2rasFAL0SN
 FmpuxqlnK+QglC9foT6mq8rZLQytIysmkzsn3Zg0A6lEvP76OIi9cHqlZyv0T174
 j9FupW91klhS4bG4sx50
 =rBCl
 -----END PGP SIGNATURE-----

Merge tag 'qcom-cleanup-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/cleanup

Merge "qcom cleanup changes for 4.1" from Kumar Gala:

General cleanups for MSM/QCOM for 4.1

* Removal of mach-msm and associated drivers cleanups that have been
  ack'd by associated maintainers

* tag 'qcom-cleanup-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  mmc: Remove msm_sdcc driver
  gpio: Remove gpio-msm-v1 driver
  ARM: Remove mach-msm and associated ARM architecture code
  + Linux 4.0-rc3

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03 13:20:42 -07:00
Stephen Boyd
c0c89fafa2 ARM: Remove mach-msm and associated ARM architecture code
The maintainers for mach-msm no longer have any plans to support
or test the platforms supported by this architecture[1]. Most likely
there aren't any active users of this code anyway, so let's
delete it.

[1] http://lkml.kernel.org/r/20150307031212.GA8434@fifo99.com
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-03-27 11:31:02 -05:00
Alexandre Belloni
5a5a6451ac ARM: at91: debug: fix non MMU debug
Linux may be used without MMU on atmel SoCs, fix debug in this configuration.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-05 10:55:13 +01:00
Linus Torvalds
878ba61aa9 ARM: SoC platform changes
New and updated SoC support. Also included are some cleanups where the
 platform maintainers hadn't separated cleanups from new developent in
 separate branches.
 
 Some of the larger things worth pointing out:
 
 - A large set of changes from Alexandre Belloni and Nicolas Ferre
   preparing at91 platforms for multiplatform and cleaning up quite a
   bit in the process.
 - Removal of CSR's "Marco" SoC platform that never made it out to the
   market. We love seeing these since it means the vendor published
   support before product was out, which is exactly what we want!
 
 New platforms this release are:
 
 - Conexant Digicolor (CX92755 SoC)
 - Hisilicon HiP01 SoC
 - CSR/sirf Atlas7 SoC
 - ST STiH418 SoC
 - Common code changes for Nvidia Tegra132 (64-bit SoC)
 
 We're seeing more and more platforms having a harder time labelling
 changes as cleanups vs new development -- which is a good sign that
 we've come quite far on the cleanup effort. So over time we might start
 combining the cleanup and new-development branches more.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU4uiiAAoJEIwa5zzehBx3LtoQAIP4eInJAumhB67MexzWGIBx
 eOsloBRMEBrjBQdSYsdsypN6T61WjDu1aieCxEGzIqitcMa59AIyyzglmlXy3UmV
 XQuSnIBag2fsOqrvqd+c6ewzAMxm2/Nbi3+zjzApkf27NDlBLhEjxuK6pAAf4Yw9
 gyWqB9g0d4V06XdqRInRvyyVfMu6fdApHLnadtjcMdiorQGd1bcOE1sQYygy6N6e
 d6vGvyKSv4ygyDG9//njzm6C5OnmHliimMToeuDC2Scel69RM97EnMXys988CqUH
 0Ru7XANEujtHXSOBYOyCv1kk4V5NguGzlfepe23oidOew8MjUdyRvKrwUiMt3AnT
 SVqcZ9UU5wjJC6j+iADh+E7zww2H0rA6vFRzXy297dDuLg2C2ONFljBj/tIKGc71
 ++gLc6LRn7UmSyK98JMzkxDhmnnPn8w2O0M5GdabAqzZSfHlL1juW9ljp9Al5P6y
 apLRzqMGjEoyC4huXvB3XVfrxGfepe5pco6wVlwmF3ilwf7iHnfuHONC1aw2mPRO
 aOKiS+0gHWL3rNZtZQtyW7Ws0I2HJFip2CWIloBK1/2ntEoh51PH7jGw8iu/6jTk
 //DCXqPBNXcLqonB9CHJZ/EWt0wup0BcHyLjlWX7iEjsdP/QJXrDgnrV3qdHibbh
 AJASjs0YVDcdvRsRStlg
 =szd9
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "New and updated SoC support.  Also included are some cleanups where
  the platform maintainers hadn't separated cleanups from new developent
  in separate branches.

  Some of the larger things worth pointing out:

   - A large set of changes from Alexandre Belloni and Nicolas Ferre
     preparing at91 platforms for multiplatform and cleaning up quite a
     bit in the process.

   - Removal of CSR's "Marco" SoC platform that never made it out to the
     market.  We love seeing these since it means the vendor published
     support before product was out, which is exactly what we want!

  New platforms this release are:

   - Conexant Digicolor (CX92755 SoC)
   - Hisilicon HiP01 SoC
   - CSR/sirf Atlas7 SoC
   - ST STiH418 SoC
   - Common code changes for Nvidia Tegra132 (64-bit SoC)

  We're seeing more and more platforms having a harder time labelling
  changes as cleanups vs new development -- which is a good sign that
  we've come quite far on the cleanup effort.  So over time we might
  start combining the cleanup and new-development branches more"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (124 commits)
  ARM: at91/trivial: unify functions and machine names
  ARM: at91: remove at91_dt_initialize and machine init_early()
  ARM: at91: change board files into SoC files
  ARM: at91: remove at91_boot_soc
  ARM: at91: move alternative initial mapping to board-dt-sama5.c
  ARM: at91: merge all SOC_AT91SAM9xxx
  ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init()
  ARM: digicolor: select syscon and timer
  ARM: zynq: Simplify SLCR initialization
  ARM: zynq: PM: Fixed simple typo.
  ARM: zynq: Setup default gpio number for Xilinx Zynq
  ARM: digicolor: add low level debug support
  ARM: initial support for Conexant Digicolor CX92755 SoC
  ARM: OMAP2+: Add dm816x hwmod support
  ARM: OMAP2+: Add clock domain support for dm816x
  ARM: OMAP2+: Add board-generic.c entry for ti81xx
  ARM: at91: pm: remove warning to remove SOC_AT91SAM9263 usage
  ARM: at91: remove unused mach/system_rev.h
  ARM: at91: stop using HAVE_AT91_DBGUx
  ARM: at91: fix ordering of SRAM and PM initialization
  ...
2015-02-17 09:27:54 -08:00
Linus Torvalds
ea7531ac4a ARM: SoC cleanups
This is a good healthy set of various code removals. Total net delta is 8100
 lines removed.
 
 Among the larger cleanups are:
 
 - Removal of old Samsung S3C DMA infrastructure by Arnd
 - Removal of the non-DT version of the 'lager' board by Magnus Damm
 - General stale code removal on OMAP and Davinci by Rickard Strandqvist
 - Removal of non-DT support on am3517 platforms by Tony Lindgren
 
 ... plus several other cleanups of various platforms across the board.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU4uYeAAoJEIwa5zzehBx3v58P/RGKt5e4CgCdHKjVhbPmADSE
 FVECT4qrIkf4dFgU5qPCBDCtQn/B3ljxZnq6Hqi8VxYD+pRcXt94R50ZyhGUZ6QF
 GLXU8jDSlY906uJwW+CHZFVLmDjTM4ONLn1ZMRtcdOrU3yGC5rZq9+Kla6ZIE6jb
 mUAFMj6e+NBPYDonq93G7968EdyLJOtK4B2ylPW0+wgSRGIEPibCiNi9yyN4hBFr
 LiaOyY/execKUo2K2BFWkfAZWt7GrwBu/qAkz/9YDRDiikLwFG2UBWbaik5Fj8tf
 v8wvpL6Af6iLpRx1wI/HoCgjFS/g/n4O3svMe7aHGyfrkEAxNtoCKlFscO8w/aLc
 eABNAb5j65it8IHvQMR5RhgqWoQe4XMlDcwsxotTe64GfxpTahdhDmhk7RKAY9Xq
 MyITvtZPTPHTSZHNEDE3HtgHn62ndSinYFhdTaBi2FQxLNCUFl2TKZxpb0r65JI/
 2yOf6hcgWGTgV1VOruAc5SHcSkQOY3SptM4n4F1B0VcDrCphBDYhRTdokELFJIIq
 I47Week8o0f+a4ot/sf0QhU68wVZENgUJO3/Q5Buta+UGSZa4NYH7Ymc159e7hGS
 k+7mCeTJC85F0H/EBWvCcZzbpwiq7jBRAY2PhqYF1EQkefdR/+28o1sX090fVaXD
 n0gXv3/ZDvJB2ryv8lR/
 =tsjK
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This is a good healthy set of various code removals.  Total net delta
  is 8100 lines removed.

  Among the larger cleanups are:

   - Removal of old Samsung S3C DMA infrastructure by Arnd
   - Removal of the non-DT version of the 'lager' board by Magnus Damm
   - General stale code removal on OMAP and Davinci by Rickard Strandqvist
   - Removal of non-DT support on am3517 platforms by Tony Lindgren

  ... plus several other cleanups of various platforms across the board"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (47 commits)
  ARM: sirf: drop redundant function and marco declaration
  arm: omap: specify PMUs are for ARMv7 CPUs
  arm: shmobile: specify PMUs are for ARMv7 CPUs
  arm: iop: specify PMUs are for XScale CPUs
  arm: pxa: specify PMUs are for XScale CPUs
  arm: realview: specify PMU types
  ARM: SAMSUNG: remove unused DMA infrastructure
  ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC
  ARM: davinci: Remove CDCE949 driver
  ARM: at91: remove useless at91rm9200_set_type()
  ARM: at91: remove useless at91rm9200_dt_initialize()
  ARM: at91: move debug-macro.S into the common space
  ARM: at91: remove useless at91_sysirq_mask_rtx
  ARM: at91: remove useless config MACH_AT91SAM9_DT
  ARM: at91: remove useless config MACH_AT91RM9200_DT
  ARM: at91: remove unused mach/memory.h
  ARM: at91: remove useless header file includes
  ARM: at91: remove unneeded header file
  rtc: at91/Kconfig: remove useless options
  ARM: at91/Documentation: add a README for Atmel SoCs
  ...
2015-02-17 09:17:33 -08:00
Baruch Siach
e23814da82 ARM: digicolor: add low level debug support
Use the USART peripheral as UART for low level debug. Only the UA0 port is
currently supported.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-27 15:11:51 -08:00
Olof Johansson
9b865d9b5c Qualcomm ARM Based SoC Updates for v3.20-2
* Various bug fixes and minor feature additions to scm code
 * Added big-endian support to debug MSM uart
 * Added big-endian support to ARCH_QCOM
 * Cleaned up some Kconfig options associated with ARCH_QCOM
 * Added Andy Gross as co-maintainer
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 Comment: GPGTools - https://gpgtools.org
 
 iQIcBAABCgAGBQJUwneSAAoJEF9hYXeAcXzBSMQQAKoE7TK1gHTxXZrZNGvNOLgi
 v8Dy/jWV07pnMA41JDyW+IgEi8C7X7Byax6G6kCyKHVOk9TkDN3zS4XTxJWGVKa2
 0f4QIJcStoHNXvUWe6rYGoW1nOyOae38uCWDY8dY+4x3gaOC3oV34NDmOlVEN5Gi
 KL0H90pHf8XLlKfx9rblkQT87Cxm/Y76xi0pnCHSyIuxsmAGInXT4zvRb/j4P1lJ
 9IEWcp6kELqa2afn/OcXdsWFlvsc/BvMeXq1yl1nFawyfkpItX98wYTZGp9yuz8c
 MRKp8Ph3lgjvHbA6EME5mumg2/uhLvv+Klbl24bNwHVfxvDyUZwEHdSOFWTboKZW
 lfY+oe5hiwL68WYruBDqyziYjhe7kTX1/Iw0K/NHn0aWsng52CW/i0GjAaefxl6i
 FFV3+39vZh1bUNmynX69zPoRSKmB16ibFaTUl4Z7AoGqxq7rM8wRXP7xizAwuULK
 q8mCAVLEBgtAzqa2T8inM+USbL4K/qnzPEQzPG7Z6JxG05U2t+Huw2YD25wavIhE
 yvvfxkMli0fojRjp9CI/MbeloA3h0dRdc3zCMF5qkgAjRK4ozQVZ4BhDWn7jCC8/
 QTCKxsYj977k6BUdHLTN3Z7/iW7F2HHXQRiJ9+HXLeLiTOSksFXnc2buHD6lwiRI
 mO6avae7XSGMpNYLa1RB
 =04jb
 -----END PGP SIGNATURE-----

Merge tag 'qcom-soc-for-3.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/soc

merge "qcom SoC changes for v3.20-2" from Kumar Gala:

Qualcomm ARM Based SoC Updates for v3.20-2

* Various bug fixes and minor feature additions to scm code
* Added big-endian support to debug MSM uart
* Added big-endian support to ARCH_QCOM
* Cleaned up some Kconfig options associated with ARCH_QCOM
* Added Andy Gross as co-maintainer

* tag 'qcom-soc-for-3.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  MAINTAINERS: Add co-maintainer for ARM/Qualcomm Support
  ARM: qcom: Drop unnecessary selects from ARCH_QCOM
  ARM: qcom: Fix SCM interface for big-endian kernels
  ARM: qcom: scm: Clarify boot interface
  ARM: qcom: Add SCM warmboot flags for quad core targets.
  ARM: qcom: scm: Add logging of actual return code from scm call
  ARM: qcom: scm: Flush the command buffer only instead of the entire cache
  ARM: qcom: scm: Get cacheline size from CTR
  ARM: qcom: scm: Fix incorrect cache invalidation
  ARM: qcom: Select ARCH_SUPPORTS_BIG_ENDIAN
  ARM: debug: msm: Support big-endian CPUs
  ARM: debug: Update MSM and QCOM DEBUG_LL help

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-23 14:57:23 -08:00
Olof Johansson
7f09a46fe9 Second batch of cleanup for 3.20:
- By reworking the PM code, we can remove the AT91 more specific initialization
 - We are using DT for SRAM initialization now, so we can remove its explicit
   mapping
 - The PMC clock driver now hosts IDLE function for at91rm9200 with other
   SoCs ones.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJUuUdxAAoJEAf03oE53VmQWvwIAKPKi90sVTuwDDf4qMBrkGgU
 IZRKX3imm5zG2HezDFp9tNxKUK3uXnJDmOlNgFKo1L+Vx/42IHew9Fy+J0vtzWUh
 y1bWwUI60wXd89tfDFeHmhk93yu5xn9Dv3dd9xlLbia2tUbHzz0E8ZDx4D2d9R63
 qdTSfB+tXlPi1Zjh0X+XLdx7cBKut//P8f+07hW3I6p1hy8E6AhtvIoCFJT3lbsU
 POiRlBFoeLoXAcHnZMBhP+ZrjHB5sfoZe83Xr5zpsW7wuo+TtpcH8H1D0QOYcrpn
 7YBzNqmrpLrtgCsuMJ92c/yaLR/k4TqhiOCVN9Z5lY3Ei2kUJj37NeqGspljhxI=
 =Ftvs
 -----END PGP SIGNATURE-----

Merge tag 'at91-cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/soc

Merge "at91: cleanup for 3.20 #2" from Nicolas Ferre:

Second batch of cleanup for 3.20:
- By reworking the PM code, we can remove the AT91 more specific initialization
- We are using DT for SRAM initialization now, so we can remove its explicit
  mapping
- The PMC clock driver now hosts IDLE function for at91rm9200 with other
  SoCs ones.

* tag 'at91-cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: (37 commits)
  ARM: at91: move at91rm9200_idle() to clk/at91/pmc.c
  ARM: at91: remove unused at91_init_sram
  ARM: at91: sama5d4: remove useless call to at91_init_sram
  ARM: at91: remove useless map_io
  ARM: at91: pm: prepare for multiplatform
  ARM: at91: pm: add UDP and UHP checks to newer SoCs
  ARM: at91: pm: use the mmio-sram pool to access SRAM
  ARM: at91: pm: rework cpu detection
  ARM: at91: dts: sama5d3: add ov2640 camera sensor support
  ARM: at91: dts: sama5d3: change name of pinctrl of ISI_MCK
  ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}
  ARM: at91: dts: sama5d3: move the isi mck pin to mb
  ARM: at91: dts: sama5d3: add missing pins of isi
  ARM: at91: dts: sama5d3: split isi pinctrl
  ARM: at91: dts: sama5d3: add isi clock
  ARM: at91/dt: ethernut5: use at91sam9xe.dtsi
  ARM: at91/dt: Add a dtsi for at91sam9xe
  ARM: at91/dt: add SRAM nodes
  ARM: at91/dt: at91rm9200ek: enable RTC
  ARM: at91/dt: rm9200: add RTC node
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21 15:17:56 -08:00
Daniel Thompson
4d31e66412 ARM: 8272/1: netx: Migrate DEBUG_LL macros to shared directory
As part of the migration we introduce DEBUG_UART_PHYS/DEBUG_UART_VIRT
which default to UART1 but allow a user to configure UART2 or UART3.
We also introduce symbolic names for the registers and flags.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21 15:49:40 +00:00
Daniel Thompson
abbfb21efc ARM: 8270/1: ks8695: Migrate debug_ll macros to shared directory
As part of the migration a couple of uart definitions have been copied
from of the platform specific header files.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21 15:49:38 +00:00
Guo Zeng
01ea63d993 ARM: sirf: add two debug ports for CSRatlas7 SoC
this patch adds UART0 and UART1 as LLUART port, as the new Atlas7
registers layout are different, it also refines some names of old
hard-coded MARCOs and uses CONFIG_DEBUG_UART_PHYS/DEBUG_UART_VIRT
to define different base addresses for multiple ports.

Signed-off-by: Guo Zeng <Guo.Zeng@csr.com>
Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-01-20 19:42:56 +08:00
Stephen Boyd
9edb4b132f ARM: debug: msm: Support big-endian CPUs
If the CPU is in big-endian mode these macros will access the
hardware incorrectly. Reverse thins as necessary to fix this.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-01-19 11:42:03 -06:00
Alexandre Belloni
5f58c97099 ARM: at91: move debug-macro.S into the common space
Move debug-macro.S from include/mach/ to include/debug where all other common
debug macros are.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15 15:24:06 +01:00