Commit Graph

88 Commits

Author SHA1 Message Date
Patrick Mochel
6623415687 [PATCH] sn: fixes due to driver core changes
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:28 -07:00
Christoph Lameter
a2a64769d0 [IA64] Fix race condition in the rt_sigprocmask fastcall
current->blocked will be set to the value of current->thread_info->flags if the
cmpxchg to update thread_info->flags fails. For performance reasons the store into
current->blocked was placed in the cmpxchg loop. However, the cmpxchg overwrites the
register holding the value to be stored. In the rare case of a retry the value of
thread_info->flags will be written into current->blocked.

The fix is to use another register so that the register containing the current->blocked
value is not overwritten.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-09 13:04:30 -07:00
Peter Chubb
05062d96a2 [PATCH] ia64: fix floating-point preemption problem
There've been reports of problems with CONFIG_PREEMPT=y and the high
floating point partition.  This is caused by the possibility of preemption
and rescheduling on a different processor while saving or restioirng the
high partition.

The only places where the FPU state is touched are in ptrace, in
switch_to(), and where handling a floating-point exception.  In switch_to()
preemption is off.  So it's only in trap.c and ptrace.c that we need to
prevent preemption.

Here is a patch that adds commentary to make the conditions clear, and adds
appropriate preempt_{en,dis}able() calls to make it so.  In trap.c I use
preempt_enable_no_resched(), as we're about to return to user space where
the preemption flag will be checked anyway.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-08 16:21:14 -07:00
Keith Owens
70aa488cff [IA64] Extract correct break number for break.b
break.b does not store the break number in cr.iim, instead it stores 0,
which makes all break.b instructions look like BUG().  Extract the
break number from the instruction itself.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-08 12:25:24 -07:00
Tony Luck
86ebacd360 [IA64] Update comment to describe modes set in default control register.
Christian Hildner pointed out that the comment did not match what the
code does in cpu_init() when we set up the default control register.
Patch based on suggestions from Ken Chen.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-08 12:12:48 -07:00
Keith Owens
866ba633a8 [IA64] Module gp must point to valid memory
Some bits of the kernel assume that gp always points to valid memory,
in particular PHYSICAL_MODE_ENTER() assumes that both gp and sp are
valid virtual addresses with associated physical pages.  The IA64
module loader puts gp well past the end of the module, with no physical
backing.  Offsets on gp are still valid, but physical mode addressing
breaks for modules.  Ensure that gp always falls within the module
body.  Also ensure that gp is 8 byte aligned.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-08 11:41:31 -07:00
David Mosberger-Tang
ad597bd518 [IA64] Fill holes in FIXADDR_USER space with zero pages.
This fixes an oops reported by Jason Baron.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-08 10:58:21 -07:00
Dean Nelson
ff89bf3bc0 [IA64] fix setting of sn_hub_info->shub_1_1_found
Fix a bug in which shub_1_1_found is not being properly initialized or set,
resulting in the improper setting of sn_hub_info->shub_1_1_found.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-03 12:37:53 -07:00
Peter Chubb
d8caebd285 [IA64] fix compilation warning in sys32_epoll_wait()
This gets rid of an unused variable `error' in sys_ia32.c:sys32_epoll_wait()

Getting rid of this one makes parsing the output of the kernecomp
autobuild easier --- searching for `Error' to find a problem kept
hitting this one, even though it's only a warning.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-01 15:44:01 -07:00
Peter Chubb
b655913bf3 [IA64] Cleanup compile warnings for ski config
The attached patch cleans up a compilation warning when ACPI
is turned off (i.e., when compiling for the Ski simulator).

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-01 15:20:17 -07:00
Tony Luck
fffcc150a2 [IA64] Use "PER_CPU" form of EXPORT macro
I was gently reminded that there are per-cpu forms of the EXPORT_SYMBOL macros.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-31 10:38:32 -07:00
Zhang Yanmin
d11cf326bd [IA64] sys_mmap doesn't follow posix.1 when parameter len=0
In IA64 kernel, sys_mmap calls do_mmap2 and do_mmap2 returns addr if
len=0, which means the mmap sys call succeeds.

Posix.1 says:
The mmap() function shall fail if:
[EINVAL] The value of len is zero. 

Here is a patch to fix it.

Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Acked-by: David Mosberger <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-26 10:19:07 -07:00
Tony Luck
fe12e25ebd [IA64] initialize spinlock pfm_alt_install_check
I applied the penultimate version of the perfmon patch, which didn't have
the initialization of the new spinlock that was added.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-18 17:09:06 -07:00
Tony Luck
a1ecf7f6e6 [IA64] alternate perfmon handler
Patch from Charles Spirakis

Some linux customers want to optimize their applications on the latest
hardware but are not yet willing to upgrade to the latest kernel. This
patch provides a way to plug in an alternate, basic, and GPL'ed PMU
subsystem to help with their monitoring needs or for specialty work. It
can also be used in case of serious unexpected bugs in perfmon. Mutual
exclusion between the two subsystems is guaranteed, hence no conflict
can arise from both subsystem being present.

Acked-by: Stephane Eranian <eranian@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-18 16:14:30 -07:00
Russ Anderson
6872ec5489 [IS64-SGI] Set Altix error handling features
The 2.6 kernel has CPE error thresholding.
This patch lets SAL know of this error handling feature.
The changes are SN specific.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-17 13:53:21 -07:00
Russ Anderson
bb68c12b40 [IA64-SGI] cpe interrupts are not being enabled.
acpi_request_vector() is called in ia64_mca_init() to get the cpe_vector.
The problem is that acpi_request_vector() looks in platform_intr_list[] to 
get the vector, but platform_intr_list[] is not initialized with a valid
vector until later (in sn_setup()).  Without a valid vector the code
defaults to polling mode.

This patch moves the call to acpi_request_vector() from ia64_mca_init()
to ia64_mca_late_init(), which is after platform_intr_list[] is initialized.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-17 12:52:43 -07:00
David Mosberger-Tang
02a017a9f3 [IA64] Correct convert_to_non_syscall()
convert_to_non_syscall() has the same problem that unwind_to_user()
used to have.  Fix it likewise.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-17 12:33:15 -07:00
Tony Luck
d0dac8082c Merge with linus 2005-05-17 09:10:20 -07:00
Christoph Hellwig
5418b6925c [PATCH] kill <asm/ioctl32.h>
These days <linux/ioctl32.h> handles everything, no need for an asm
header on just two architectures.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:21 -07:00
David Mosberger-Tang
bfd6859408 [IA64] Avoid .spillpsp directive in handcoded assembly
Some time ago, GAS was fixed to bring the .spillpsp directive in line
with the Intel assembler manual (there was some disagreement as to
whether or not there is a built-in 16-byte offset).  Unfortunately,
there are two places in the kernel where this directive is used in
handwritten assembly files and those of course relied on the "buggy"
behavior.  As a result, when using a "fixed" assembler, the kernel
picks up the UNaT bits from the wrong place (off by 16) and randomly
sets NaT bits on the scratch registers.  This can be noticed easily by
looking at a coredump and finding various scratch registers with
unexpected NaT values.  The patch below fixes this by using the
.spillsp directive instead, which works correctly no matter what
assembler is in use.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-10 13:52:00 -07:00
David Mosberger-Tang
66302f211a [IA64] fix "section mismatch" compile-time-error
I noticed this typo when trying to compile a kernel which had
CONFIG_HOTPLUG turned off.  In that case, __devinit is no longer a
no-op and the compiler then detects a section-conflict.  Fix by using
__devinitdata instead of __devinit.

Same patch also submitted by Darren Williams to fix compilation error
using sim_defconfig (which has CONFIG_HOTPLUG=n).

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by:  Darren Williams <dsw@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-09 10:16:17 -07:00
David Mosberger-Tang
966dc11fcc [IA64] Fix stack placement when INIT hits in kernel mode.
Without this patch, the stack is placed _below_ the current task
structure, which is risky at best.

Tony, I think this patch needs to go into 2.6.12, since it fixes a
real bug.  Without it, INIT may case secondary errors, which would be
most unpleasant.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-06 10:16:07 -07:00
Anton Blanchard
7d12e522ba [PATCH] ppc64: remove hidden -fno-omit-frame-pointer for schedule.c
While looking at code generated by gcc4.0 I noticed some functions still
had frame pointers, even after we stopped ppc64 from defining
CONFIG_FRAME_POINTER.  It turns out kernel/Makefile hardwires
-fno-omit-frame-pointer on when compiling schedule.c.

Create CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER and define it on architectures
that dont require frame pointers in sched.c code.

(akpm: blame me for the name)

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:32 -07:00
David Woodhouse
bfd4bda097 Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-05-05 13:59:37 +01:00
Dean Nelson
9b48b46678 [IA64-SGI] move nodepda pointer out of pda
Remove the p_nodepda and p_subnodepda pointers from the pda_s structure.
And then define a new per-cpu pointer to the nodepda and export it so
that it can be accessed by kernel modules.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-04 10:18:32 -07:00
Tony Luck
c4b07b7b36 [IA64] Update arch/ia64/configs/tiger_defconfig
Kristen did most of the checking, bring this up to -rc2.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 16:27:44 -07:00
Tony Luck
a71f62edc9 [IA64] Fix two warnings introduced by perfmon patches.
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 16:21:45 -07:00
stephane eranian
a5a70b75d9 [IA64] another perfmon fix (take2)
- pfm_context_load(): change return value from EINVAL to EBUSY
  when context is already loaded.

- pfm_check_task_state(): pass test if context state is MASKED.
  It is safe to give access on PFM_CTX_MASKED because the PMU
  state (PMD) is stable and saved in software state.
  This helps multiplexing programs such as the example given
  in libpfm-3.1.

Signed-off-by: stephane eranian <eranian@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 15:47:58 -07:00
Stephane Eranian
8df5a500a3 [IA64] perfmon & PAL_HALT again
The pmu_active test is based on the values of PSR.up. THIS IS THE PROBLEM as
it does not take into account the lazy restore logic which is as follow (simplified):

context switch out:
	save PMDs
	clear psr.up
	release ownership

context switch in:
	if (ctx->last_cpu == smp_processor_id() && ctx->cpu_activation == cpu_activation) {
		set psr.up
		return
	}
	restore PMD
	restore PMC
	ctx->last_cpu   = smp_processor_id();
	ctx->activation = ++cpu_activation;
	set psr.up

The key here is that on context switch out, we clear psr.up and on context switch in
we check if nobody else used the PMU on that processor since last time we came. In
that case, we assume the PMD/PMC are ours and we simply reactivate.

The Caliper problem is that between the moment we context switch out and the moment we
come back, nobody effectively used the PMU BUT the processor went idle. Normally this
would have no incidence but PAL_HALT does alter the PMU registers.  In default_idle(),
the test on psr.up is not strong enough to cover this case and we go into PAL which
trashed the PMU resgisters. When we come back we falsely assume that this is our state
yet it is corrupted. Very nasty indeed.

To avoid the problem it is necessary to forbid going to PAL_HALT as soon as perfmon
installs some valid state in the PMU registers. This happens with an application
attaches a context to a thread or CPU. It is not enough to check the psr/dcr bits.
Hence I propose the attached patch. It adds a callback in process.c to modify the
condition to enter PAL on idle. Basically, now it is conditional to pal_halt=1 AND
perfmon saying it is okay.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 15:44:48 -07:00
Mark Maule
3ea8b477b4 [IA64] altix: fix TIOCA dmamap list_add
Correct a bug where tioca_dma_mapped() is putting tioca dma map structs
on the wrong list.

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:52:22 -07:00
Keith Owens
32709d8ae6 [IA64] SAL to OS callbacks cannot call sleeping
When SAL calls back into the OS, the OS code is running with preempt
disabled so it cannot call sleeping functions.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:48:55 -07:00
Russ Anderson
b1b901c202 [IA64] MCA recovery improvements
Jack Steiner uncovered some opportunities for improvement in
the MCA recovery code.

  1) Set bsp to save registers on the kernel stack.
  2) Disable interrupts while in the MCA recovery code.
  3) Change the way the user process is killed, to avoid 
     a panic in schedule.

Testing shows that these changes make the recovery code much 
more reliable with the 2.6.12 kernel.

Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:47:42 -07:00
David Woodhouse
446b8831f5 [IA64] fix ia64 syscall auditing
Attached is a patch against David's audit.17 kernel that adds checks
for the TIF_SYSCALL_AUDIT thread flag to the ia64 system call and
signal handling code paths.  The patch enables auditing of system
calls set up via fsys_bubble_down, as well as ensuring that
audit_syscall_exit() is called on return from sigreturn.

Neglecting to check for TIF_SYSCALL_AUDIT at these points results in
incorrect information in audit_context, causing frequent system panics
when system call auditing is enabled on an ia64 system.

I have tested this patch and have seen no problems with it.

[Original patch from Amy Griffis ported to current kernel by David Woodhouse]

From: Amy Griffis <amy.griffis@hp.com>
From: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:45:39 -07:00
Zwane Mwaikambo
7d5f9c0f10 [IA64] reduce cacheline bouncing in cpu_idle_wait
Andi noted that during normal runtime cpu_idle_map is bounced around a lot,
and occassionally at a higher frequency than the timer interrupt wakeup
which we normally exit pm_idle from.  So switch to a percpu variable.

I didn't move things to the slow path because it would involve adding
scheduler code to wakeup the idle thread on the cpus we're waiting for.

Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:40:18 -07:00
Mike Habeck
de7548d0e2 [IA64-SGI] Altix only: Fix for sn_dma_flush
The following patch fixes a bug in the SGI Altix sn_dma_flush code.  
sn_dma_flush is broken in 2.6.  The code isn't waiting for the DMA 
data to be flushed out of the PIC ASIC. This patch is based off the 
linux-ia64-test-2.6.12 tree

Signed-off-by: Mike Habeck <habeck@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:36:09 -07:00
Alex Williamson
bb0fc08545 [IA64] use common pxm function
This patch simplifies a couple places where we search for _PXM
values in ACPI namespace.  Thanks,

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:33:18 -07:00
Colin Ngam
c0b12422e5 [IA64-SGI] Altix only: Register Error Interrupt
The following patch ensures that the correct error interrupt handling 
routine is initialized.  This patch is based on the 2.6.12 ia64 release tree.

Signed-off-by: Colin Ngam <cngam@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:21:03 -07:00
Dean Nelson
3a7d555bfc [IA64-SGI] convert AMO address found in XPC's reserved page
This patch detects the existence of an uncached physical AMO address setup
by EFI's XPBOOT (SGI) and converts it to an uncached virtual AMO address.
Depends on a patch submitted on 23 March 2005 with the subject of:
    [PATCH 2/3] SGI Altix cross partition functionality (2nd revision)

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 12:50:22 -07:00
Dean Nelson
a2d974da0a [IA64-SGI] SGI Altix cross partition functionality [3/3]
This patch contains the cross partition pseudo-ethernet driver (XPNET)
functional support module.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 12:37:19 -07:00
Dean Nelson
89eb8eb927 [IA64-SGI] SGI Altix cross partition functionality [2/3]
This patch contains the communication module (XPC) for cross partition
communication on a partitioned SGI Altix.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 12:36:00 -07:00
Tony Luck
21223a9e78 [IA64] manually apply changes to arch/ia64/sn/kernel/Makefile
cg-patch couldn't apply the patch to Makefile, and my dumb script
rushed on and ran cg-commit without this change.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 12:25:50 -07:00
Dean Nelson
b0d82bd5df [IA64-SGI] SGI Altix cross partition functionality (2nd
This patch contains the shim module (XP) which interfaces between the
communication module (XPC) and the functional support modules (like XPNET).

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 12:16:52 -07:00
Dean Nelson
2e34f07ff0 [PATCH] move cnodeid_to_nasid_table out of pda
Another step in the effort to eliminate the SN pda structure.
This patch moves the cnodeid_to_nasid_table field out of the pda,
making it a standalone per-cpu data item, and exports it so it can
be accessed by kernel modules.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 12:07:46 -07:00
Bruce Losure
ce0a3956b3 [IA64-SGI] Altix patch to add bricktype knowledge to tiocx
Here is a patch to enable the SGI tiocx bus driver to distingush between
FPGA-attached h/w and non-FPGA-attached h/w.

Signed-off-by: Bruce Losure <blosure@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 12:01:07 -07:00
Bruce Losure
c2d1d65ad4 [IA64-SGI] Altix only: Remove hubdev SAL call
Hi Tony,

This patch against ia64-test-2.6.12 fixes a bug where the tiocx code
was inadvertently un-doing some address modifications done in earlier
fixup code.    This patch just removes the offending code.

Signed-off-by: Bruce Losure <blosure@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 11:58:37 -07:00
David Mosberger-Tang
2074615a13 [IA64] use fc.i for fluch_icache_range()
This is a small patch to switch fluch_icache_range() to use fc.i
instead of fc.  This would save time on processors which can establish
i-cache coherency without flushing the cache-line out to memory (not
that any current processors do).  On existing processors, fc.i behaves
like fc.  The only caveat is that very old assemblers may not know
about fc.i yet.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 11:27:33 -07:00
David Mosberger-Tang
9df6f705c0 [IA64] fix typos caught by new assembler
Patch below fixes 3 trivial typos which are caught by the new
assembler (v2.169.90).  Please apply.

[Note: fix to memcpy that was also part of this patch was separately
 applied from patches by H.J. and Andreas ... so the delta here only
 has the other two fixes. -Tony]

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 10:56:42 -07:00
Andreas Schwab
512f64295f [IA64] Fix memcpy_mck.S for current binutils
The current ia64 assembler complains about mismatching .proc/.endp pairs.
(Same patch also sent by H.J. Lu)

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 10:49:29 -07:00
Suresh Siddha
7a9bdd8842 [IA64] Add config SCHED_SMT
Now that we have MC/MT detection patches in, appended patch allows us to
configure MT scheduler optimizations. For now, we will this option off
by default.

There is some discussion going on lkml about setting up sched-domains 
which are absolutely needed (like for example, we shouldn't setup SMT domain
for non MT processors). Once that patch goes in, we can enable this option by
default.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 10:33:28 -07:00
David Woodhouse
27b030d58c Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-05-03 08:14:09 +01:00