Commit Graph

120 Commits

Author SHA1 Message Date
Manuel Lauss
58e75e86cf MIPS: Alchemy: Move development board code to common subdirectory
This should ease sharing of common devboard code.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:25 +00:00
David Daney
7e69deb83c MIPS: Hook up Cavium OCTEON in arch/mips.
Take all the OCTEON specific files that were added, and hook them into
the build system for the arch/mips.  For versions of GCC that lack
OCTEON support, override gas target architecture.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:22 +00:00
Shinya Kuribayashi
f27655e341 MIPS: EMMA: Move arch/mips/emma2rh/ into arch/mips/emma/
git mv arch/mips/{emma2rh,emma} and fixups Makefiles.  We'll put all NEC
EMMA series based machines there in the future.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:29 +00:00
Shinya Kuribayashi
cd741b604b MIPS: EMMA: Kconfig reorganization
- Move EMMA related stuff into arch/mips/emma/Kconfig
- Create CONFIG_SOC_EMMA* to handle more EMMA SoCs effectively
- Rename CONFIG_MARKEINS into CONFIG_NEC_MARKEINS

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:29 +00:00
Shinya Kuribayashi
542c1020ac MIPS: Add CONFIG_CPU_R5500 for NEC VR5500 series processors
We already have sufficient infrastructure to support VR5500 and VR5500A
series processors.  Here's a Makefile support to make it selectable by
ports, and enable it for NEC EMMA2RH Markeins board.

This patch also fixes a confused target help, and adds 1Gb PageMask bits
supported by VR5500 and its variants.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:29 +00:00
Daniel Laird
edb6310aaa MIPS: Add support for NXP PNX833x (STB222/5) into linux kernel
The following patch add support for the NXP PNX833x SOC.  More
specifically it adds support for the STB222/5 variant. It fixes
the vectored interrupt issue.

Signed-off-by: daniel.j.laird <daniel.j.laird@nxp.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27 16:18:29 +00:00
Ralf Baechle
384740dc49 MIPS: Move headfiles to new location below arch/mips/include
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:52 +01:00
Ralf Baechle
e8c7c48234 MIPS: Alchemy: rename directory
It's more than the au1000 these days.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11 16:18:50 +01:00
Atsushi Nemoto
b27311e1ca MIPS: TXx9: Add RBTX4939 board support
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/txx9/rbtx4939/Makefile
 create mode 100644 arch/mips/txx9/rbtx4939/irq.c
 create mode 100644 arch/mips/txx9/rbtx4939/prom.c
 create mode 100644 arch/mips/txx9/rbtx4939/setup.c
 create mode 100644 include/asm-mips/txx9/rbtx4939.h
2008-10-11 16:18:49 +01:00
Ralf Baechle
73b4390fb2 [MIPS] Routerboard 532: Support for base system
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-20 14:38:18 +01:00
Atsushi Nemoto
4c642f3f5e [MIPS] TXx9: rename asm-mips/mach-jmr3927 to asm-mips/mach-tx39xx
Rename mach-jmr3927 directory to more proper name to make adding other
platforms easier.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:38 +01:00
Yoichi Yuasa
efff4ae259 [MIPS] cmbvr4133: Remove support
It cannot be built for a long time and nobody maintains it.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:36 +01:00
Atsushi Nemoto
edcaf1a6a7 [MIPS] TXx9: Make single kernel can support multiple boards
Make single kernel can be used on RBTX4927/37/38.  Also make
some SoC-specific code independent from board-specific code.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:35 +01:00
Atsushi Nemoto
22b1d707ff [MIPS] TXx9: Reorganize code
Move arch/mips/{jmr3927,tx4927,tx4938} into arch/mips/txx9/ tree.
This will help more code sharing and maintainance.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:35 +01:00
Ralf Baechle
315806cb19 [MIPS] Malta: Cleanup organization of code into directories.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:34 +01:00
Ralf Baechle
eda49eeebf [MIPS] Remove always true ifdef conditions.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:34 +01:00
Ralf Baechle
1398ddb2eb [MIPS] SEAD: Remove support code.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:33 +01:00
Ralf Baechle
2157bc6871 [MIPS] Atlas: Remove support code.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:33 +01:00
Ralf Baechle
372a775f50 [MIPS] Enable -ffunction-sections sections.
-ffunction-sections serves as a workaround for the problems caused by the
limited branch range in some inline assembler fragments for very large
compilation units.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:33 +01:00
Maciej W. Rozycki
63a4881a7d [MIPS] Sibyte: Build RTC support as an object
Build the SWARM platform library is as an object rather than an archive
so that files which only contain symbols used by initcalls and do not
provide any symbols that would pull them from an archive still work.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-06-16 15:14:47 +01:00
Thomas Bogendoerfer
0e27d79311 [MIPS] Better load address for big endian SNI RM
Use better load address for big endian kernels to avoid clashes with
PROM / SASH.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-06-16 15:14:46 +01:00
Daniel Laird
a92b05880d [MIPS] Move arch/mips/philips to arch/mips/nxp
Signed-off-by: daniel.j.laird <daniel.j.laird@nxp.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28 17:14:26 +01:00
Thomas Bogendoerfer
82933342c3 [MIPS] Check for GCC r10k-cache-barrier support
Check whether gcc supports -mr10-cache-barrier=1 and issue a cleaner
error message if not. This option is needed to build working SGI IP28
kernels.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-01 15:46:33 +01:00
Adrian Bunk
de0c16985d [MIPS] Use KBUILD_DEFCONFIG
With KBUILD_DEFCONFIG we don't have to ship a second copy of ip22_defconfig.

Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-03-12 14:14:41 +00:00
Ralf Baechle
302922e5f6 [MIPS] Qemu: Remove platform.
The Qemu platform was originally implemented to have an easily supportable
platform until Qemu reaches a state where it emulates a real world system.
Since the latest release Qemu is capable of emulating the MIPSsim and
Malta platforms, so this goal has been reached.  The Qemu plaform is also
rather underfeatured so less useful than a Malta emulation.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:15:02 +00:00
Ralf Baechle
fa71c96002 [MIPS] Altas, Malta: Switch boot file format to raw.
A raw binary boots about twice as fast as SREC.

The possibility to generate SREC binaries remains by simply using the
vmlinux.srec target but seems only useful for the probably hypothetical
case where one of these systems is booted over a serial interface.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:15:00 +00:00
Thomas Bogendoerfer
231a35d372 [MIPS] RM: Collected changes
- EISA support for non PCI RMs (RM200 and RM400-xxx). The major part
  is the splitting of the EISA and onboard ISA of the RM200, which
  makes the EISA bus on the RM200 look like on other RMs.
- 64bit kernel support
- system type detection is now common for big and little endian
- moved sniprom code to arch/mips/fw
- added call_o32 function to arch/mips/fw/lib, which uses a private
  stack for calling prom functions
- fix problem with ISA interrupts, which makes using PIT clockevent
  possible

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
Thomas Bogendoerfer
e2defae5a9 [MIPS] IP28 support
Add support for SGI IP28 machines (Indigo 2 with R10k CPUs)
This work is mainly based on Peter Fuersts work.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:58 +00:00
Maciej W. Rozycki
20d60d9973 [MIPS] R4000/R4400 errata workarounds
This is the gereric part of R4000/R4400 errata workarounds.  They include 
compiler and assembler support as well as some source code modifications 
to address the problems with some combinations of multiply/divide+shift 
instructions as well as the daddi and daddiu instructions.

 Changes included are as follows:

1. New Kconfig options to select workarounds by platforms as necessary.

2. Arch top-level Makefile to pass necessary options to the compiler; also 
   incompatible configurations are detected (-mno-sym32 unsupported as 
   horribly intrusive for little gain).

3. Bug detection updated and shuffled -- the multiply/divide+shift problem 
   is lethal enough that if not worked around it makes the kernel crash in 
   time_init() because of a division by zero; the daddiu erratum might 
   also trigger early potentially, though I have not observed it.  On the 
   other hand the daddi detection code requires the exception subsystem to 
   have been initialised (and is there mainly for information).

4. r4k_daddiu_bug() added so that the existence of the erratum can be 
   queried by code at the run time as necessary; useful for generated code 
   like TLB fault and copy/clear page handlers.

5. __udelay() updated as it uses multiplication in inline assembly.

 Note that -mdaddi requires modified toolchain (which has been maintained 
by myself and available from my site for ~4years now -- versions covered 
are GCC 2.95.4 - 4.1.2 and binutils from 2.13 onwards).  The -mfix-r4000 
and -mfix-r4400 have been standard for a while though.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:54 +00:00
Maciej W. Rozycki
3247989ee8 [MIPS] Makefile: Fix canonical system names
The GNU `config.guess' uses "linux-gnu" as the canonical system name.
Fix the list of compiler prefixes checked to spell it correctly.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15 23:21:51 +00:00
Ralf Baechle
17f690be45 [MIPS] Kbuild: Use the new cc-cross-prefix feature.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-22 22:09:01 +01:00
Maciej W. Rozycki
44a2db43eb lk201: remove obsolete driver
Remove the old-fashioned lk201 driver under drivers/tc/ that used to be
used by the old dz.c and zs.c drivers, which is now orphan code referred to
from nowhere and does not build anymore.  A modern replacement is available
as drivers/input/keyboard/lkkbd.c.

There are no plans to do anything about this piece of code and it does not
fit anywhere anymore, so it is not just a matter of maintenance or the lack
of.  There are still some bits that might be added to the new lkkbd.c
driver based on the old code, and the embedded hardware documentation which
is otherwise quite hard to get hold of might be useful to keep too.  Both
of these can be done separately though.  RIP.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:57 -07:00
Sam Ravnborg
222d394d30 kbuild: enable 'make AFLAGS=...' to add additional options to AS
The variable AFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of AFLAGS with KBUILD_AFLAGS all over
the tree.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-15 21:59:31 +02:00
Sam Ravnborg
a0f97e06a4 kbuild: enable 'make CFLAGS=...' to add additional options to CC
The variable CFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of CFLAGS with KBUILD_CFLAGS all over the
tree and enabling one to use:
make CFLAGS=...
to specify additional gcc commandline options.

One usecase is when trying to find gcc bugs but other
use cases has been requested too.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k

Test was simple to do a defconfig build, apply the patch and check
that nothing got rebuild.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-14 22:21:35 +02:00
Franck Bui-Huu
e58d95abb7 [MIPS] Don't abort the build process if '-msym32' isn't supported
-msym32 and previously the strategy to tell the compiler to generate
64-bit code but the assembler to put it into 32-bit ELF was initially
a hack to get around the lack of proper 64-bit binutils support and
later turned into a neat optimization with significant code size
savings.  But it's really just an optimization so there is nothing
wrong with just dropping the option (and whatever else goes along with
it, I forgot all the nasty details) on the floor if due to a vintage
compiler it can't be suported.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:10 +01:00
Aurelien Jarno
2f56cfdd81 [MIPS] Move ARC code into arch/mips/fw/arc
Move the ARC code to arch/mips/fw/arc from arch/mips/arc.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:06 +01:00
Aurelien Jarno
df78b5c8fa [MIPS] Move CFE code into arch/mips/fw/cfe
Move the platform independent part of the CFE code to arch/mips/fw/cfe from
arch/mips/sibyte/cfe.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:05 +01:00
Aurelien Jarno
1c0c13eb93 [MIPS] Add support for BCM47XX CPUs.
Note that the BCM4710 does not support the wait instruction, this
is not a mistake in the code.
    
It originally comes from the OpenWrt patches.
    
Cc: Michael Buesch <mb@bu3sch.de>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Florian Schirmer <jolt@tuxbox.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:02 +01:00
Brian Murphy
1f21d2bde0 [MIPS] Add back support for LASAT platforms
Signed-off-by: Brian Murphy <brian@murphy.dk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:00 +01:00
Franck Bui-Huu
054c51b436 [MIPS] Rename CONFIG_BUILD_ELF64 into KBUILD_64BIT_SYM32
This patch renames it for 3 reasons:

    - "CONFIG" pattern is used by Kconfig. Now this macro is
      no more defined by Kconfig but by Kbuild itself make this
      clear by translating "CONFIG" into "KBUILD".

    - "ELF32" word is improper because it is irrelevant to ELF
      format and it makes confusion with CONFIG_BOOT_ELF32. So
      translate it with SYM32.

    - Add "64BIT" part to make clear that this macro implies a
      64 bits kernel.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:45:59 +01:00
Franck Bui-Huu
adff90a933 [MIPS] Automatically set CONFIG_BUILD_ELF64
We do not rely on user anymore to setup this config correctly.
Instead we make our choice depending on the load address.

If we want to force Kbuild to use ELF64 format whatever
the load address we can still do:

        $ make BUILD_ELF32=no

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:45:59 +01:00
Franck Bui-Huu
8c67316e70 [MIPS] Remove '-mno-explicit-relocs' option when CONFIG_BUILD_ELF64
This patch removes '-mno-explicit-relocs' usage when
CONFIG_BUILD_ELF64 is set since this option was only required
with the old hack to truncate addresses at the assembly level
where "-mabi=64 -Wa,-mabi=32" was used.

This should yield a small code size improvement for inline
assembly, where the R constraint is used.

The idea is coming from Maciej <macro@linux-mips.org>.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:45:58 +01:00
Yoichi Yuasa
ff32b062ea [MIPS] DDB5477: Remove support
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31 21:35:34 +01:00
Ralf Baechle
0b0ef2ea00 [MIPS] Remove Momentum Ocelot support.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31 21:35:29 +01:00
Ralf Baechle
e7865765ef [MIPS] Fix archhelp.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31 21:35:28 +01:00
Ralf Baechle
8496b401b0 [MIPS] Cleanup default bootfile format rule mess.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31 21:35:28 +01:00
Yoichi Yuasa
9a0f3b7360 [MIPS] MIPSsim: Fix cflags
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-24 16:02:47 +01:00
Ralf Baechle
688b3d7208 [MIPS] Delete Ocelot 3 support.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10 17:33:05 +01:00
Yoichi Yuasa
c99cabf034 [MIPS] remove LASAT Networks platforms support
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10 17:33:04 +01:00
Atsushi Nemoto
5ddcb3c35b [MIPS] Make ioremap() work on TX39/49 special unmapped segment
TX39XX and TX49XX have "reserved" segment in CKSEG3 area.
0xff000000-0xff3fffff on TX49XX and 0xff000000-0xfffeffff on TX39XX
are reserved (unmapped, uncached).  Controllers on these SoCs are
placed in this segment.

This patch add plat_ioremap() and plat_iounmap() to override default
behavior and implement these hooks for TX39/TX49.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-10 17:33:03 +01:00