Commit Graph

9 Commits

Author SHA1 Message Date
Thomas Gleixner
7f8a894066 [MTD] DOC: Fixup read functions and do a little cleanup
The NAND rework resulted in non ECC based reads. Fix it up and
do a bit of cleanup while at it.

Pointed out by Adrian Bunk.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-06-28 10:11:33 +02:00
Thomas Gleixner
8593fbc68b [MTD] Rework the out of band handling completely
Hopefully the last iteration on this!

The handling of out of band data on NAND was accompanied by tons of fruitless
discussions and halfarsed patches to make it work for a particular
problem. Sufficiently annoyed by I all those "I know it better" mails and the
resonable amount of discarded "it solves my problem" patches, I finally decided
to go for the big rework. After removing the _ecc variants of mtd read/write
functions the solution to satisfy the various requirements was to refactor the
read/write _oob functions in mtd.

The major change is that read/write_oob now takes a pointer to an operation
descriptor structure "struct mtd_oob_ops".instead of having a function with at
least seven arguments.

read/write_oob which should probably renamed to a more descriptive name, can do
the following tasks:

- read/write out of band data
- read/write data content and out of band data
- read/write raw data content and out of band data (ecc disabled)

struct mtd_oob_ops has a mode field, which determines the oob handling mode.

Aside of the MTD_OOB_RAW mode, which is intended to be especially for
diagnostic purposes and some internal functions e.g. bad block table creation,
the other two modes are for mtd clients:

MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is
described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's
up to the caller to make sure that the byte positions are not used by the ECC
placement algorithms.

MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in
the out of band area which are described by the oobfree tuples in the ecclayout
data structre which is associated to the devicee.

The decision whether data plus oob or oob only handling is done depends on the
setting of the datbuf member of the data structure. When datbuf == NULL then
the internal read/write_oob functions are selected, otherwise the read/write
data routines are invoked.

Tested on a few platforms with all variants. Please be aware of possible
regressions for your particular device / application scenario

Disclaimer: Any whining will be ignored from those who just contributed "hot
air blurb" and never sat down to tackle the underlying problem of the mess in
the NAND driver grown over time and the big chunk of work to fix up the
existing users. The problem was not the holiness of the existing MTD
interfaces. The problems was the lack of time to go for the big overhaul. It's
easy to add more mess to the existing one, but it takes alot of effort to go
for a real solution.

Improvements and bugfixes are welcome!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:51 +02:00
Thomas Gleixner
9223a456da [MTD] Remove read/write _ecc variants
MTD clients are agnostic of FLASH which needs ECC suppport.
Remove the functions and fixup the callers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 17:21:03 +02:00
Joern Engel
28318776a8 [MTD] Introduce writesize
At least two flashes exists that have the concept of a minimum write unit,
similar to NAND pages, but no other NAND characteristics.  Therefore, rename
the minimum write unit to "writesize" for all flashes, including NAND.

Signed-off-by: Joern Engel <joern@wh.fh-wedel.de>
2006-05-22 23:18:05 +02:00
David Woodhouse
f0ad11d060 [MTD] Fix capitalisation in export of old doc2001.c initfunc
Oops. Stupid StudlyCaps. Again.

This driver is doubly-deprecated because is was subsumed into doc2000.c
and _also_ we want people to start using the new NAND wrapper for these
devices anyway. But ISTR there was still one person using it because
something didn't work for them. Must chase that up and then I can kill
this.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-12 11:40:13 +01:00
David Woodhouse
5e535429a9 Remove inter_module_xxx() from DiskOnChip drivers.
Finally putting it back how it was before Keith got at it -- yay :)

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-08 14:05:05 +01:00
Arjan van de Ven
858119e159 [PATCH] Unlinline a bunch of other functions
Remove the "inline" keyword from a bunch of big functions in the kernel with
the goal of shrinking it by 30kb to 40kb

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 18:27:06 -08:00
Thomas Gleixner
e5580fbe8a [MTD] devices: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 15:06:59 +01:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00