Commit Graph

687 Commits

Author SHA1 Message Date
Ursula Braun
28692ec45e qeth: discard inbound packets with unknown header id
Debugging statements are added for inbound packets with unknown
header id. Those packets are discarded and no longer processed as
osn-packets.

Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:54:42 -07:00
Klaus D. Wacker
59579da329 lcs: Channel errors drive lcs_recovery which leads to kernel panic.
When the lcs irq routine detects channel failures it drives device recovery.
After this event the device is no longer usable for shutdown requests,
because the lcs_irq routine may get wrong channel status information.
In such a case the lcs_irq routine marks the channel in 'error' state.
The channel state comes back to 'running' after restarting the channels.

Signed-off-by: Klaus D. Wacker <kdwacker@de.ibm.com>
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:54:41 -07:00
Ursula Braun
d8fae9c2f2 qeth: avoid duplicate deletion of multicast addresses
if qeth_set_multicast_list() is performed on 2 CPUs in parallel,
card->ip_list may end corrupted.
Solution: In function __qeth_delete_all_mc()
          remove card->ip_list entry before invoking
          qeth_deregister_addr_entry(). Thus a 2nd invocation of
          qeth_set_multicast_list() cannot try to remove the
          same entry twice.

Signed-off-by Ursula Braun <braunu@de.ibm.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:54:41 -07:00
Frank Blaschka
6570ebc4f5 qeth: EDDP does not work on large MTUs
Fix filling the qdio buffers in EDDP mode.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:54:40 -07:00
Klaus D. Wacker
bc4b2b497a qeth: HiperSockets layer-3 interface drop non IPv4 or non IPv6 packets
HiperSockets infrastructure (layer-3 mode) supports only IPv4 or
IPv6 packets. Sending other packet types disturbs TCP/IP on z/VM,
which issues messages about invalid packets.
Qeth send routine will detect packet type on sending over a
HiperSockets interface (in layer-3 mode) and drop non IP packets.
The error and drop count of the interface is incremented.

Signed-off-by: Klaus D. Wacker <kdwacker@de.ibm.com>
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:54:39 -07:00
Stephen Hemminger
3b04ddde02 [NET]: Move hardware header operations out of netdevice.
Since hardware header operations are part of the protocol class
not the device instance, make them into a separate object and
save memory.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:52 -07:00
Stephen Hemminger
b95cce3576 [NET]: Wrap hard_header_parse
Wrap the hard_header_parse function to simplify next step of
header_ops conversion.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:51 -07:00
Ralf Baechle
10d024c1b2 [NET]: Nuke SET_MODULE_OWNER macro.
It's been a useless no-op for long enough in 2.6 so I figured it's time to
remove it.  The number of people that could object because they're
maintaining unified 2.4 and 2.6 drivers is probably rather small.

[ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ]

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:13 -07:00
Linus Torvalds
cabe456902 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] libiscsi: sync up iscsi and scsi eh's access to the connection
  [SCSI] libiscsi: fix null ptr regression when aborting a command with data to transfer
  [SCSI] qla2xxx: Update version number to 8.02.00-k3.
  [SCSI] qla2xxx: Correct mailbox register dump for FWI2 capable ISPs.
  [SCSI] qla2xxx: Correct 8GB iIDMA support.
  [SCSI] qla2xxx: Correct management-server login-state synchronization issue.
  [SCSI] qla2xxx: Don't modify parity bits during ISP25XX restart.
  [SCSI] qla2xxx: Allocate enough space for the full PCI descriptor.
  [SCSI] zfcp: fix the data buffer accessor patch
  [SCSI] zfcp: allocate gid_pn_data objects from gid_pn_cache
  [SCSI] zfcp: fix memory leak
2007-09-11 07:46:09 -07:00
Klaus D. Wacker
54d0f56e63 qeth: Drop ARP packages on HiperSockets interface with NOARP attribute.
A network interface can get ARP packets even when the interface has
NOARP specified. In a HiperSockets environment this disturbs receiving
systems when packets are sent on the multicast queue. (E.g. TCP/IP on
z/VM issues messages reporting invalid data on the HiperSockets
interface.)
Qeth will no longer send ARP packets on HiperSockets interface when
interface has the NOARP attribute.

Signed-off-by: Klaus D. Wacker <kdwacker@de.ibm.com>
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31 06:52:58 -04:00
Ursula Braun
6e55cab9f0 qeth: provide specific message for OSA-adapters exclusively used
Exclusive usage of OSA-cards has been introduced. Even though Linux
does not make use of it, qeth should be prepared to receive a bad RC
for some initialization steps. A meaningful message is now given,
if an OSA-device is set online, even though the OSA-adapter is already
exclusively used by another host.

Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31 06:52:58 -04:00
Ursula Braun
6d4f3d182b qeth: crash during reboot after failing online setting
Online setting of a qeth device may fail for instance because of:
- out-of-memory condition when allocating qdio queues
- IDX ACTIVATE problem
- ...
Such a device is still returned in a driver_for_each_device loop
processed in qeth_reboot_event(), which calls
qeth_clear_qdio_buffers(). Make sure qeth_clear_output_buffer() is
called only, if the qdio queues have been successfully allocated
during initialization of a qeth device.

Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31 06:52:58 -04:00
Frank Blaschka
5a4b61a95a qeth: Announce tx checksumming for qeth devices in TSO/EDDP mode
TSO requires tx checksumming. For non GSO frames in TSO/EDDP mode we
have to manually calculate the checksum.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31 06:52:58 -04:00
Heiko Carstens
ecee51b755 qeth: dont return the return values of void functions.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31 06:52:58 -04:00
Frank Blaschka
cde4603516 qeth: enforce a rate limit for inbound scatter gather messages
under memory pressure scatter gather mode switching messages must be
rate limited.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31 06:52:57 -04:00
Ursula Braun
d0a34f98d1 qeth: ungrouping a device must not be interruptible
Problem:
A recovery thread must not be active when device is removed.
In qeth_remove_device() an interruptible wait operation is used
to wait until a qeth recovery thread is finished. If a user really
interrupts the ungroup operation of a qeth device while a recovery
is running, cio and qeth are out of sync (device already removed
from cio, but kept in qeth). A following module unload of qeth
results in a kernel OOPS here.

Solution:
Do not allow interruption of ungroup operation to guarantee
finishing of a potentially running qeth recovery thread.

Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31 06:52:57 -04:00
Michael Holzheu
8127a1f80a [S390] vmur: fix reference counting for vmur device structure
When a vmur device is removed due to a detach of the device, currently the
ur device structure is freed. Unfortunately it can happen, that there is
still a user of the device structure, when the character device is open
during the detach process. To fix this, reference counting for the vmur
structure is introduced.
In addition to that, the online, offline, probe and remove functions are
serialized now using a global mutex.

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22 13:51:48 +02:00
Michael Holzheu
0a87c5cfc0 [S390] vmur: fix diag14 exceptions with addresses > 2GB.
There are several s390 diagnose calls, which must be executed below the
2GB memory boundary. In order to enforce this, those diagnoses must be
compiled into the kernel. Currently diag 14 can be called within the
vmur kernel module from addresses above 2GB. This leads to specification
exceptions. This patch moves diag10, diag14 and diag210 into the new
diag.c file.

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22 13:51:47 +02:00
Klaus D. Wacker
37cd0a007f [S390] qdio: Refresh buffer states for IQDIO Asynchronous output queue
Hipersocket Multicast queue works asynchronously. When sending buffers,
the buffer state change may happen delayed. The tasklet for checking
changes in the outbound queue excluded IQDIO async queues from this
process. This created either a hang situation when the queue ran full,
or presented a hang situation a interface close time.
The tasklet processing is changed to include IQDIO async queues when
requesting buffer state refresh.

Signed-off-by: Klaus D. Wacker <kdwacker@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-22 13:51:47 +02:00
Klaus D. Wacker
f276730f8d [S390] qdio: fix EQBS handling on CCQ96
QDIO returned from EQBS instruction in any case after return code
CCQ=96 was issued regardless whether buffer states for at least one
buffer were extracted or not.
This caused FCP devices to hang when running under z/VM and having
QIOASSASIST=ON and having high I/O rates.
In order to fix this qdio return code processing of EQBS instruction
after CCQ=96 is changed that buffers are returned and if no buffers
where extracted the instruction is repeated at once.

Signed-off-by: Klaus D. Wacker <kdwacker@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22 13:51:47 +02:00
Cornelia Huck
23eb68c569 [S390] cio: change confusing message in cmf.
cmf currently prints a message that more than 4096 channels are not
allowed in basic mode - however, this can only be enforced if cmf was
a module (which is no longer possible). It makes much more sense to
not check the specified number of channels and just print a message if
the block for basic mode could not be allocated (which may happen for
any number of specified channels).

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-22 13:51:47 +02:00
Cornelia Huck
3520c92283 [S390] cio: dont forget to set last slot to NULL in ccw_uevent().
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22 13:51:46 +02:00
Heiko Carstens
9d212a4d20 [SCSI] zfcp: fix the data buffer accessor patch
Fix the data buffer accessor patch.

For request without a data buffer nothing was written into
a SBALE.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-15 12:28:44 -05:00
Heiko Carstens
47b87b7948 [SCSI] zfcp: allocate gid_pn_data objects from gid_pn_cache
allocate gid_pn_data objects from gid_pn_cache.

Allocate gid_pn_data objects from the corresponding cache which ensures
proper alignment.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-15 12:28:29 -05:00
Heiko Carstens
83f6d6d725 [SCSI] zfcp: fix memory leak
fix memory leak.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-15 12:28:17 -05:00
Melissa Howland
cbea66d978 [S390] monwriter: Serialization bug for multithreaded applications.
Locking added so that multithreaded applications can now do writes
from different threads without the risk of storage corruption.

Signed-off-by: Melissa Howland <melissah@us.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10 14:32:39 +02:00
Michael Holzheu
3eed13cc3b [S390] vmur: diag14 only works with buffers below 2GB
If memory buffers above 2GB are used, diagnose 14 raises a specification
exception. This fix ensures that buffer allocation is done below the 2GB
boundary.

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10 14:32:39 +02:00
Michael Holzheu
4eac34529b [S390] vmur: add "top of queue" sanity check for reader open
If the z/VM reader is already open, it can happen that after opening the
Linux reader device, not the topmost file is processed. According the
semantics of the Linux z/VM unit record device driver, always the topmost
file has to be processed. With this fix an error is returned if that is
not the case.

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10 14:32:38 +02:00
Michael Holzheu
f2405598e0 [S390] vmur: reject open on z/VM reader files with status HOLD
If a reader file with HOLD status is at the top of the reader queue, currently
all read requests will return data of the second file in the queue. But the
semantics of vmur is that always the topmost file is read. With this fix
-EPERM is returned on open, if the topmost reader file is in HOLD status.

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10 14:32:37 +02:00
Heiko Carstens
278bc68c4b [S390] vmur: use DECLARE_COMPLETION_ONSTACK to keep lockdep happy
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
000000000ff9fb08 000000000ff9fb18 0000000000000002 0000000000000000
000000000ff9fbb8 000000000ff9fb30 000000000ff9fb30 0000000000104198
0000000000000000 0000000000000002 0000000000000000 0000000000000000
000000000ff9fb18 000000000000000c 000000000ff9fb18 000000000ff9fb88
0000000000448db0 0000000000104198 000000000ff9fb18 000000000ff9fb68
Call Trace:
([<00000000001040ea>] show_trace+0x12e/0x170)
 [<00000000001041f2>] show_stack+0xc6/0xf8
 [<0000000000104252>] dump_stack+0x2e/0x3c
 [<0000000000155f9c>] __lock_acquire+0x460/0x1048
 [<0000000000156c16>] lock_acquire+0x92/0xb8
 [<000000000043f406>] _spin_lock_irqsave+0x62/0x80
 [<0000000000121382>] complete+0x32/0x78
 [<000000001082b468>] ur_int_handler+0xc8/0xec [vmur]
 [<0000000000313216>] ccw_device_call_handler+0xae/0xd4
 [<0000000000310da4>] ccw_device_irq+0x5c/0x130
 [<0000000000312c84>] io_subchannel_irq+0x8c/0x118
 [<000000000030a88c>] do_IRQ+0x16c/0x194
 [<0000000000111a62>] io_no_vtime+0x16/0x1c
 [<0000000080001394>] 0x80001394

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10 14:32:37 +02:00
Michael Holzheu
1eade380c5 [S390] vmur: allocate single record buffers instead of one big data buffer
vmur allocates one contiguous kernel buffer to copy user data when creating
ccw programs for punch or printer. If big block sizes are used, under memory
pressure it can happen, that we do not get memory in one chunk. Now we
allocate memory for each single record to avoid high order allocations.

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10 14:32:37 +02:00
Heiko Carstens
c6d0e8014a [S390] qdio: make sure data structures are correctly aligned.
The slsb structure contained at the beginning of the qdio_q structure
must start on a 256 byte boundary. To make sure this is the case even
if slab debugging is turned on create an own slab cache for qdio_q
structures.
Besides that don't use the slab allocator to allocate whole pages. Use
the page allocator instead.
Also fix a few memory leaks in error handling code.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10 14:32:36 +02:00
Cornelia Huck
5693ce6f9b [S390] cio: avoid memory leak on error in css_alloc_subchannel().
sch->lock has been allocated in cio_validate_subchannel(), it must be
freed if cio_modify() fails.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10 14:32:36 +02:00
Linus Torvalds
bced137384 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (32 commits)
  [SCSI] aacraid: prevent panic on adapter resource failure
  [SCSI] aha152x: use data accessors and !use_sg cleanup
  [SCSI] aha152x: Fix check_condition code-path
  [SCSI] aha152x: Clean Reset path
  [SCSI] aha152x: preliminary fixes and some comments
  [SCSI] aha152x: use bounce buffer
  [SCSI] aha152x: fix debug mode symbol conflict
  [SCSI] sd: disentangle barriers in SCSI
  [SCSI] lpfc : scsi command accessor fix for 8.2.2
  [SCSI] qlogicpti: Some cosmetic changes
  [SCSI] lpfc 8.2.2 : Change version number to 8.2.2
  [SCSI] lpfc 8.2.2 : Style cleanups
  [SCSI] lpfc 8.2.2 : Miscellaneous Bug Fixes
  [SCSI] lpfc 8.2.2 : Miscellaneous management and logging mods
  [SCSI] lpfc 8.2.2 : Rework the lpfc_printf_log() macro
  [SCSI] lpfc 8.2.2 : Attribute and Parameter splits for vport and physical port
  [SCSI] lpfc 8.2.2 : Fix locking around HBA's port_list
  [SCSI] lpfc 8.2.2 : Error messages and debugfs updates
  [SCSI] initialize shost_data to zero
  [SCSI] mptsas: add SMP passthrough support via bsg
  ...
2007-08-06 17:48:34 -07:00
Gabriel Craciunescu
d133a9609e Typo fixes errror -> error
Typo fixes errror -> error

Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:42 -07:00
FUJITA Tomonori
7936a892e7 [SCSI] zfcp: convert to use the data buffer accessors
- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31 10:29:04 -05:00
Heiko Carstens
5aaaf9f0ed [S390] Fix sclp_vt220 error handling.
Also convert to slab_is_available() as an indicator if
get_zeroed_page() will work or not.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27 12:29:20 +02:00
Cornelia Huck
4434a38c37 [S390] cio: Reorganize initialization.
- Localize more of the init calls in init_channel_subsystem().
- Print a warning if init_channel_subsystem() failed.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27 12:29:20 +02:00
Cornelia Huck
303fa9e396 [S390] cio: Make CIO_* macros safe if dbfs are not available.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27 12:29:20 +02:00
Cornelia Huck
e556bbbd9d [S390] cio: Clean up messages.
- Remove unneeded messages.
- Move some messages into the debug feature.
- Use dev_* where appropriate.
- Use "cio: " prefix consistently.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27 12:29:19 +02:00
Frank Munzert
2b3d8c9e06 [S390] vmur: fix diag14_read.
Record length of spool file must be only stored in 1st SPLINK record

Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27 12:29:19 +02:00
Cornelia Huck
8059862c63 [S390] cio: Remove deprecated rdc/rcd.
http://marc.info/?l=linux-kernel&m=118481061928246&w=2 seems to
indicate disfavour of "deprecated", so let's just kill it now.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27 12:29:18 +02:00
Heiko Carstens
e62133b4ea [S390] Get rid of new section mismatch warnings.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27 12:29:18 +02:00
Heiko Carstens
3b74a87422 [S390] sclp: kill unused SCLP config option.
sclp is always compiled in.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27 12:29:18 +02:00
Cornelia Huck
36914e5d69 [S390] cio: Remove remains of _ccw_device_get_device_number().
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27 12:29:17 +02:00
Cornelia Huck
07c6a3386d [S390] cio: css_sch_device_register() can be made static.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27 12:29:17 +02:00
john stultz
2c6b47de17 Cleanup non-arch xtime uses, use get_seconds() or current_kernel_time().
This avoids use of the kernel-internal "xtime" variable directly outside
of the actual time-related functions.  Instead, use the helper functions
that we already have available to us.

This doesn't actually change any behaviour, but this will allow us to
fix the fact that "xtime" isn't updated very often with CONFIG_NO_HZ
(because much of the realtime information is maintained as separate
offsets to 'xtime'), which has caused interfaces that use xtime directly
to get a time that is out of sync with the real-time clock by up to a
third of a second or so.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-25 10:09:20 -07:00
Jens Axboe
165125e1e4 [BLOCK] Get rid of request_queue_t typedef
Some of the code has been gradually transitioned to using the proper
struct request_queue, but there's lots left. So do a full sweet of
the kernel and get rid of this typedef and replace its uses with
the proper type.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-24 09:28:11 +02:00
Linus Torvalds
e6f194d8f6 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (60 commits)
  [SCSI] libsas: make ATA functions selectable by a config option
  [SCSI] bsg: unexport sg v3 helper functions
  [SCSI] bsg: fix bsg_unregister_queue
  [SCSI] bsg: make class backlinks
  [SCSI] 3w-9xxx: add support for 9690SA
  [SCSI] bsg: fix bsg_register_queue error path
  [SCSI] ESP: Increase ESP_BUS_TIMEOUT to 275.
  [SCSI] libsas: fix scr_read/write users and update the libata documentation
  [SCSI] mpt fusion: update Kconfig help
  [SCSI] scsi_transport_sas: add destructor for bsg
  [SCSI] iscsi_tcp: buggered kmalloc()
  [SCSI] qla2xxx: Update version number to 8.02.00-k2.
  [SCSI] qla2xxx: Add ISP25XX support.
  [SCSI] qla2xxx: Use pci_try_set_mwi().
  [SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces.
  [SCSI] qla2xxx: Re-factor isp_operations to static structures.
  [SCSI] qla2xxx: Validate mid-layer 'underflow' during check-condition handling.
  [SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration.
  [SCSI] qla2xxx: Generalize iIDMA support.
  [SCSI] qla2xxx: Generalize FW-Interface-2 support.
  ...
2007-07-22 11:36:49 -07:00
Paul Mundt
20c2df83d2 mm: Remove slab destructors from kmem_cache_create().
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 10:11:58 +09:00