Commit Graph

70 Commits

Author SHA1 Message Date
Jeff Garzik
f000fd8093 [ALSA] Fix synchronize_irq() bugs, redundancies
free_irq() calls synchronize_irq() for you, so there is no need for
drivers to manually do the same thing (again).  Thus, calls where
sync-irq immediately precedes free-irq can be simplified.

However, during this audit several bugs were noticed, where free-irq is
preceded by a "irq >= 0" check... but the sync-irq call is not covered
by the same check.

So, where sync-irq could not be eliminated completely, the missing check
was added.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:40 +02:00
Clemens Ladisch
4972a177fe [ALSA] oxygen: generalize DAC volume TLV handling
Add a pointer for DAC volume TLV data to the model structure so that the
model driver do not need to manually assign it in their control filter.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:37 +02:00
Clemens Ladisch
e983532e44 [ALSA] oxygen: mute by default
Initialize the playback volume controls as being muted and having
minimal volume.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:37 +02:00
Clemens Ladisch
193e813814 [ALSA] oxygen: generalize handling of DAC volume limits
Add fields for the DAC volume limits to the module structure so that
model drivers do not need to install their own control info handlers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:36 +02:00
Clemens Ladisch
0c0e6daf14 [ALSA] hifier: remove empty hifier_mixer_init()
The empty hifier_mixer_init() function is useless; remove it.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:36 +02:00
Clemens Ladisch
a8bb1bad9b [ALSA] virtuoso: fix DX front panel I/O
Fix the GPIO 1 mixer control to enable I/O through the front panel
connector of the Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:36 +02:00
Clemens Ladisch
80060ecc45 [ALSA] virtuoso: initialize two-wire control register
On the Xonar DX, initialize all bits of the two-wire control register.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:32 +02:00
Clemens Ladisch
387fb6a206 [ALSA] virtuoso: add GPIO 1 mixer control
Add a mixer control for switching whatever it is that is connected to
GPIO pin 1 on the Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:32 +02:00
Clemens Ladisch
1d98c7d4be [ALSA] oxygen: use SPDIF input only if present
If the card model does not have a digital input or an AC97 codec,
disable the respective interrupt and mixer controls.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:32 +02:00
Clemens Ladisch
11864b4b84 [ALSA] virtuoso: correctly switch input jack on Xonar DX
When selecting the capture source on the Xonar DX, the input jack must
be routed to either the line input or the microphone input by setting a
GPIO pin.  This requires an additional callback so that the model driver
can hook into the toggling of AC97 switches.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:32 +02:00
Clemens Ladisch
a9d3cc485e [ALSA] virtuoso: add Xonar DX support
Add support for the Asus Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:32 +02:00
Clemens Ladisch
80647ee26e [ALSA] virtuoso: fix typo
Fix a (fortunately harmless) typo.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:32 +02:00
Clemens Ladisch
aef1a535c4 [ALSA] virtuoso: change card short name
Change the card short name to show to show the card name instead of the
chip name.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:32 +02:00
Clemens Ladisch
d08267a9df [ALSA] virtuoso: set PCM1796 oversampling rate
When playing data at 96 kHz or higher, reduce the DAC oversampling rate
to 32.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:31 +02:00
Clemens Ladisch
af9af1741f [ALSA] virtuoso: move some code to xonar_common_init()
Move the code that is common to all Xonar models to a separate function,
and make it more generic in preparation for another model.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:31 +02:00
Clemens Ladisch
a694a6a0e4 [ALSA] virtuoso: allow both CS5381 and CS5361
Rename all CS5381 symbols to CS53x1 because they can also be used for
Xonar models with a CS5361.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:31 +02:00
Clemens Ladisch
271ebfca58 [ALSA] virtuoso: separate D2/D2X init functions
Use separate model structures for the D2 and D2X so that the init
function does not have to check for the model again.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:31 +02:00
Clemens Ladisch
10e6d5f9b6 [ALSA] oxygen: add I2C support
Add a function to write I2C registers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:31 +02:00
Clemens Ladisch
e97f79994a [ALSA] oxygen: fix line-in recording selection (now for real)
On C-Media cards, the GPIO pin 0 of the CM9780 must be handled exactly
like on Xonar cards, so move the Xonar code to the common mixer code.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:30 +02:00
Clemens Ladisch
43dd89c7e7 [ALSA] oxygen: disable clock of unused I2S inputs
Disable the master clock outputs of any unused I2S inputs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00
Clemens Ladisch
db12b8e301 [ALSA] oxygen: move MIDI flag to model struct
Put the flag that enables the MIDI port into the model structure instead
of passing it as a separate parameter to oxygen_pci_probe().

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00
Clemens Ladisch
87eedd2fd4 [ALSA] oxygen: make SPI/2-wire configuration model-specific
Allow the model drivers to specify if the codec communication goes over
SPI or a 2-wire bus.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00
Clemens Ladisch
f009ad9b39 [ALSA] oxygen: change model-specific PCM device configuration
When specifying which PCM devices to use, model drivers now use flags
that also specify the routing between PCM devices and DMA channels
instead of just DMA channel bits.  This simplifies some code that checks
for these flags.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00
Clemens Ladisch
fa5d8106cb [ALSA] oxygen: add monitor controls
Add controls to enable monitoring of the analog and digital inputs.

To allow monitoring after loading the driver when nothing has been
played back or recorded yet, the I2S input and outputs are initialized
to a valid configuration.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:27 +02:00
Clemens Ladisch
33fa724e29 [ALSA] virtuoso: move PCM1796 symbols to a header file
Move the PCM1796 register symbol definitions to their own header file.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:27 +02:00
Clemens Ladisch
f5b2368ba8 [ALSA] oxygen: move WM8785 symbols to a header file
Move the WM8786 register symbol definitions to their own header file.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:27 +02:00
Harvey Harrison
ff143874d0 [ALSA] sound: virtuoso.c fix shadowed variable warning
Use priv_idx as an identifier.
sound/pci/oxygen/virtuoso.c:277:15: warning: symbol 'index' shadows an earlier one
sound/pci/oxygen/virtuoso.c:56:12: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:18 +02:00
Clemens Ladisch
b930b9f41d [ALSA] oxygen: add owner field
I forgot to set the module owner for the HiFier/Xonar models.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-02-29 11:28:16 +01:00
Clemens Ladisch
902b05c117 [ALSA] oxygen: fix line-in recording selection
The GPIO pin 0 of the CM9780 must be set when muting the line input even
on non-Xonar cards.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-22 14:20:08 -08:00
Takashi Iwai
f007dc045a [ALSA] oxygen - Fix section mismatch
Removed invalid __devinit and __devexit that are remaining after
split to a helper module.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-22 14:20:08 -08:00
Clemens Ladisch
2ea85986dd [ALSA] oxygen: revert SPI clock frequency change for AK4396/WM8785
While the AK4396 and WM8785 datasheets say that the SPI clock cycle
length must be at least 200 ns, 320 ns seems not to work reliably with
the controller, so we better use 160 ns.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:23 +01:00
Clemens Ladisch
7c0141591f [ALSA] virtuoso: monitor external power on D2X
On the Xonar D2X, monitor the GPIO pin that indicates whether external
power is present.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:18 +01:00
Clemens Ladisch
5f7b9b4577 [ALSA] oxygen: add front panel capture
When a second AC97 codec is present, add a PCM device for capturing from
the front panel.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:17 +01:00
Clemens Ladisch
a360156049 [ALSA] oxygen: add front panel controls
Add mixer controls for the front panel AC97 codec.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:17 +01:00
Clemens Ladisch
1e821dd276 [ALSA] oxygen: use AC97 interrupt
After an AC97 register read or write, use the AC97 interrupt instead of
polling to wait for the access to be completed.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:17 +01:00
Clemens Ladisch
911b499af4 [ALSA] oxygen: make line-in exclusive only on Xonar
Move the line input switching code to the Virtuoso driver because only
the Xonar cards bypass the analog mixer for line input.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:17 +01:00
Clemens Ladisch
236c4920ea [ALSA] oxygen: fix AK4396 double rate upper limit
Fix the upper sample rate limit for the double rate mode of the AK4396
to the value from the datasheet.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:16 +01:00
Clemens Ladisch
c626026dd7 [ALSA] add TempoTec HiFier driver
Add a driver for the MediaTek/TempoTec HiFier Fantasia sound card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:15 +01:00
Clemens Ladisch
b78e3dbb04 [ALSA] oxygen: more initialization
Initialize more registers of the controller and the second AC97 codec.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:15 +01:00
Clemens Ladisch
976cd62700 [ALSA] oxygen: make the number of analog output configurable
Add a field to struct oxygen_model to allow model drivers for cards with
less than eight output channels.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:14 +01:00
Clemens Ladisch
cd93dc8cca [ALSA] oxygen: remove MIDI for generic cards
None of the reference design models have MIDI, only the X-Meridian
allows to connect a MIDI adapter.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:13 +01:00
Clemens Ladisch
33c646e4ff [ALSA] oxygen: fix SPDIF input rates
Fix up SPDIF input sample rates again: 32 kHz and 64 kHz are not
supported.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:13 +01:00
Clemens Ladisch
02f21c9d6b [ALSA] oxygen: add SPDIF loopback control
Add a mixer control for the SPDIF loopback function.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:09 +01:00
Clemens Ladisch
c57cccc038 [ALSA] oxygen: optimize snd_pcm_hardware structures
Add one more indirection to the lookup of the snd_pcm_hardware
structures so that we can save the space of the duplicate ones.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:08 +01:00
Clemens Ladisch
7f0b89465b [ALSA] oxygen: add 192 kHz SPDIF input support
Change the oxygen_spdif_input_bits_changed() function so that clock
changes on the SPDIF input are correctly detected.  This means that
sample rates greater than 96 kHz are now supported.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:08 +01:00
Clemens Ladisch
5a256f862c [ALSA] oxygen: fix DAC source register fields
Fix some wrong values for the definitions of the source masks for DACS 1
and 3.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:08 +01:00
Clemens Ladisch
e9d88a8bd9 [ALSA] oxygen: fix control filter
Actually use the template that was maybe changed by the control filter
instead of the original one.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:08 +01:00
Clemens Ladisch
7ef37cd954 [ALSA] oxygen: move model-specific data out of common header
Instead of having model-specific fields in the common struct oxygen, put
them into a private structure that is allocated together with the card
structure.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:08 +01:00
Clemens Ladisch
3b94253bc9 [ALSA] oxygen: reduce SPI clock frequency for AK4396/WM8785
According to the datasheets, the SPI clock cycle must be at least 200 ns
for the AK4396 and the WM8785, so we cannot use the default 160 ns.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:07 +01:00
Clemens Ladisch
71e22a4b77 [ALSA] oxygen: allow more sample rates with WM8785
Allow to record with 32 kHz, 64 kHz, 88.2 kHz and 176.4 kHz with cards
that have a WM8785 ADC.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:07 +01:00