Commit Graph

114 Commits

Author SHA1 Message Date
Christoph Lameter
71a2224d7d [PATCH] Optimize sys_times for a single thread process
Avoid taking the tasklist_lock in sys_times if the process is single
threaded.  In a NUMA system taking the tasklist_lock may cause a bouncing
cacheline if multiple independent processes continually call sys_times to
measure their performance.

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:30 -07:00
Kirill Korotaev
4fea2838aa [PATCH] Software suspend and recalc sigpending bug fix
This patch fixes recalc_sigpending() to work correctly with tasks which are
being freezed.

The problem is that freeze_processes() sets PF_FREEZE and TIF_SIGPENDING
flags on tasks, but recalc_sigpending() called from e.g.
sys_rt_sigtimedwait or any other kernel place will clear TIF_SIGPENDING due
to no pending signals queued and the tasks won't be freezed until it
recieves a real signal or freezed_processes() fail due to timeout.

Signed-Off-By: Kirill Korotaev <dev@sw.ru>
Signed-Off-By: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:27 -07:00
Alan Cox
d6e7114481 [PATCH] setuid core dump
Add a new `suid_dumpable' sysctl:

This value can be used to query and set the core dump mode for setuid
or otherwise protected/tainted binaries. The modes are

0 - (default) - traditional behaviour.  Any process which has changed
    privilege levels or is execute only will not be dumped

1 - (debug) - all processes dump core when possible.  The core dump is
    owned by the current user and no security is applied.  This is intended
    for system debugging situations only.  Ptrace is unchecked.

2 - (suidsafe) - any binary which normally would not be dumped is dumped
    readable by root only.  This allows the end user to remove such a dump but
    not access it directly.  For security reasons core dumps in this mode will
    not overwrite one another or other files.  This mode is appropriate when
    adminstrators are attempting to debug problems in a normal environment.

(akpm:

> > +EXPORT_SYMBOL(suid_dumpable);
>
> EXPORT_SYMBOL_GPL?

No problem to me.

> >  	if (current->euid == current->uid && current->egid == current->gid)
> >  		current->mm->dumpable = 1;
>
> Should this be SUID_DUMP_USER?

Actually the feedback I had from last time was that the SUID_ defines
should go because its clearer to follow the numbers. They can go
everywhere (and there are lots of places where dumpable is tested/used
as a bool in untouched code)

> Maybe this should be renamed to `dump_policy' or something.  Doing that
> would help us catch any code which isn't using the #defines, too.

Fair comment. The patch was designed to be easy to maintain for Red Hat
rather than for merging. Changing that field would create a gigantic
diff because it is used all over the place.

)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:26 -07:00
Prasanna S Panchamukhi
8b0914ea74 [PATCH] jprobes: allow a jprobe to coexist with muliple kprobes
Presently either multiple kprobes or only one jprobe could be inserted.
This patch removes the above limitation and allows one jprobe and multiple
kprobes to coexist at the same address.  However multiple jprobes cannot
coexist with multiple kprobes.  Currently I am working on the prototype to
allow multiple jprobes coexist with multiple kprobes.

Signed-off-by: Ananth N Mavinakayanhalli <amavin@redhat.com>
Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:25 -07:00
Prasanna S Panchamukhi
ea32c65cc2 [PATCH] kprobes: Temporary disarming of reentrant probe
In situations where a kprobes handler calls a routine which has a probe on it,
then kprobes_handler() disarms the new probe forever.  This patch removes the
above limitation by temporarily disarming the new probe.  When the another
probe hits while handling the old probe, the kprobes_handler() saves previous
kprobes state and handles the new probe without calling the new kprobes
registered handlers.  kprobe_post_handler() restores back the previous kprobes
state and the normal execution continues.

However on x86_64 architecture, re-rentrancy is provided only through
pre_handler().  If a routine having probe is referenced through
post_handler(), then the probes on that routine are disarmed forever, since
the exception stack is gets changed after the processor single steps the
instruction of the new probe.

This patch includes generic changes to support temporary disarming on
reentrancy of probes.

Signed-of-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:24 -07:00
Hien Nguyen
0aa55e4d7d [PATCH] kprobes: moves lock-unlock to non-arch kprobe_flush_task
This patch moves the lock/unlock of the arch specific kprobe_flush_task()
to the non-arch specific kprobe_flusk_task().

Signed-off-by: Hien Nguyen <hien@us.ibm.com>
Acked-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:21 -07:00
Rusty Lynch
7e1048b11c [PATCH] Move kprobe [dis]arming into arch specific code
The architecture independent code of the current kprobes implementation is
arming and disarming kprobes at registration time.  The problem is that the
code is assuming that arming and disarming is a just done by a simple write
of some magic value to an address.  This is problematic for ia64 where our
instructions look more like structures, and we can not insert break points
by just doing something like:

*p->addr = BREAKPOINT_INSTRUCTION;

The following patch to 2.6.12-rc4-mm2 adds two new architecture dependent
functions:

     * void arch_arm_kprobe(struct kprobe *p)
     * void arch_disarm_kprobe(struct kprobe *p)

and then adds the new functions for each of the architectures that already
implement kprobes (spar64/ppc64/i386/x86_64).

I thought arch_[dis]arm_kprobe was the most descriptive of what was really
happening, but each of the architectures already had a disarm_kprobe()
function that was really a "disarm and do some other clean-up items as
needed when you stumble across a recursive kprobe." So...  I took the
liberty of changing the code that was calling disarm_kprobe() to call
arch_disarm_kprobe(), and then do the cleanup in the block of code dealing
with the recursive kprobe case.

So far this patch as been tested on i386, x86_64, and ppc64, but still
needs to be tested in sparc64.

Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:21 -07:00
Hien Nguyen
b94cce926b [PATCH] kprobes: function-return probes
This patch adds function-return probes to kprobes for the i386
architecture.  This enables you to establish a handler to be run when a
function returns.

1. API

Two new functions are added to kprobes:

	int register_kretprobe(struct kretprobe *rp);
	void unregister_kretprobe(struct kretprobe *rp);

2. Registration and unregistration

2.1 Register

  To register a function-return probe, the user populates the following
  fields in a kretprobe object and calls register_kretprobe() with the
  kretprobe address as an argument:

  kp.addr - the function's address

  handler - this function is run after the ret instruction executes, but
  before control returns to the return address in the caller.

  maxactive - The maximum number of instances of the probed function that
  can be active concurrently.  For example, if the function is non-
  recursive and is called with a spinlock or mutex held, maxactive = 1
  should be enough.  If the function is non-recursive and can never
  relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should
  be enough.  maxactive is used to determine how many kretprobe_instance
  objects to allocate for this particular probed function.  If maxactive <=
  0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 *
  NR_CPUS) else maxactive=NR_CPUS)

  For example:

    struct kretprobe rp;
    rp.kp.addr = /* entrypoint address */
    rp.handler = /*return probe handler */
    rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */
    register_kretprobe(&rp);

  The following field may also be of interest:

  nmissed - Initialized to zero when the function-return probe is
  registered, and incremented every time the probed function is entered but
  there is no kretprobe_instance object available for establishing the
  function-return probe (i.e., because maxactive was set too low).

2.2 Unregister

  To unregiter a function-return probe, the user calls
  unregister_kretprobe() with the same kretprobe object as registered
  previously.  If a probed function is running when the return probe is
  unregistered, the function will return as expected, but the handler won't
  be run.

3. Limitations

3.1 This patch supports only the i386 architecture, but patches for
    x86_64 and ppc64 are anticipated soon.

3.2 Return probes operates by replacing the return address in the stack
    (or in a known register, such as the lr register for ppc).  This may
    cause __builtin_return_address(0), when invoked from the return-probed
    function, to return the address of the return-probes trampoline.

3.3 This implementation uses the "Multiprobes at an address" feature in
    2.6.12-rc3-mm3.

3.4 Due to a limitation in multi-probes, you cannot currently establish
    a return probe and a jprobe on the same function.  A patch to remove
    this limitation is being tested.

This feature is required by SystemTap (http://sourceware.org/systemtap),
and reflects ideas contributed by several SystemTap developers, including
Will Cohen and Ananth Mavinakayanahalli.

Signed-off-by: Hien Nguyen <hien@us.ibm.com>
Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:21 -07:00
Alexander Nyberg
df164db5fd [PATCH] avoid resursive oopses
Prevent recursive faults in do_exit() by leaving the task alone and wait
for reboot.  This may allow a more graceful shutdown and possibly save the
original oops.

Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:20 -07:00
Christoph Hellwig
5f45f1a78f [PATCH] remove duplicate get_dentry functions in various places
Various filesystem drivers have grown a get_dentry() function that's a
duplicate of lookup_one_len, except that it doesn't take a maximum length
argument and doesn't check for \0 or / in the passed in filename.

Switch all these places to use lookup_one_len.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Greg KH <greg@kroah.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:20 -07:00
Jesper Juhl
be5b4fbd01 [PATCH] preempt_count is int - remove cast and don't assign to unsigned type
In kernel/sched.c the return value from preempt_count() is cast to an int.
That made sense when preempt_count was defined as different types on is not
needed and should go away.  The patch removes the cast.

In kernel/timer.c the return value from preempt_count() is assigned to a
variable of type u32 and then that unsigned value is later compared to
preempt_count().  Since preempt_count() returns an int, an int is what
should be used to store its return value.  Storing the result in an
unsigned 32bit integer made a tiny bit of sense back when preempt_count was
different types on different archs, but no more - let's not play signed vs
unsigned comparison games when we don't have to.  The patch modifies the
code to use an int to hold the value.  While I was around that bit of code
I also made two changes to a nearby (related) printk() - I modified it to
specify the loglevel explicitly and also broke the line into a few pieces
to avoid it being longer than 80 chars and clarified the text a bit.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:19 -07:00
Greg Edwards
ab4af03a40 [PATCH] CON_CONSDEV bit not set correctly on last console
According to include/linux/console.h, CON_CONSDEV flag should be set on
the last console specified on the boot command line:

     86 #define CON_PRINTBUFFER (1)
     87 #define CON_CONSDEV     (2) /* Last on the command line */
     88 #define CON_ENABLED     (4)
     89 #define CON_BOOT        (8)

This does not currently happen if there is more than one console specified
on the boot commandline.  Instead, it gets set on the first console on the
command line.  This can cause problems for things like kdb that look for
the CON_CONSDEV flag to see if the console is valid.

Additionaly, it doesn't look like CON_CONSDEV is reassigned to the next
preferred console at unregister time if the console being unregistered
currently has that bit set.

Example (from sn2 ia64):

elilo vmlinuz root=<dev> console=ttyS0 console=ttySG0

in this case, the flags on ttySG console struct will be 0x4 (should be
0x6).

Attached patch against bk fixes both issues for the cases I looked at.  It
uses selected_console (which gets incremented for each console specified on
the command line) as the indicator of which console to set CON_CONSDEV on.
When adding the console to the list, if the previous one had CON_CONSDEV
set, it masks it out.  Tested on ia64 and x86.

The problem with the current behavior is it breaks overriding the default from
the boot line.  In the ia64 case, there may be a global append line defining
console=a in elilo.conf.  Then you want to boot your kernel, and want to
override the default by passing console=b on the boot line.  elilo constructs
the kernel cmdline by starting with the value of the global append line, then
tacks on whatever else you specify, which puts console=b last.

Signed-off-by: Greg Edwards <edwardsg@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:18 -07:00
Oleg Nesterov
f972be33ce [PATCH] posix-timers: use try_to_del_timer_sync()
sys_timer_settime/sys_timer_delete needs to delete k_itimer->real.timer
synchronously while holding ->it_lock, which is also locked in
posix_timer_fn.

This patch removes timer_active/set_timer_inactive which plays with
timer_list's internals in favour of using try_to_del_timer_sync(), which
was introduced in the previous patch.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:17 -07:00
Oleg Nesterov
fd450b7318 [PATCH] timers: introduce try_to_del_timer_sync()
This patch splits del_timer_sync() into 2 functions.  The new one,
try_to_del_timer_sync(), returns -1 when it hits executing timer.

It can be used in interrupt context, or when the caller hold locks which
can prevent completion of the timer's handler.

NOTE.  Currently it can't be used in interrupt context in UP case, because
->running_timer is used only with CONFIG_SMP.

Should the need arise, it is possible to kill #ifdef CONFIG_SMP in
set_running_timer(), it is cheap.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:16 -07:00
Oleg Nesterov
55c888d6d0 [PATCH] timers fixes/improvements
This patch tries to solve following problems:

1. del_timer_sync() is racy. The timer can be fired again after
   del_timer_sync have checked all cpus and before it will recheck
   timer_pending().

2. It has scalability problems. All cpus are scanned to determine
   if the timer is running on that cpu.

   With this patch del_timer_sync is O(1) and no slower than plain
   del_timer(pending_timer), unless it has to actually wait for
   completion of the currently running timer.

   The only restriction is that the recurring timer should not use
   add_timer_on().

3. The timers are not serialized wrt to itself.

   If CPU_0 does mod_timer(jiffies+1) while the timer is currently
   running on CPU 1, it is quite possible that local interrupt on
   CPU_0 will start that timer before it finished on CPU_1.

4. The timers locking is suboptimal. __mod_timer() takes 3 locks
   at once and still requires wmb() in del_timer/run_timers.

   The new implementation takes 2 locks sequentially and does not
   need memory barriers.

Currently ->base != NULL means that the timer is pending. In that case
->base.lock is used to lock the timer. __mod_timer also takes timer->lock
because ->base can be == NULL.

This patch uses timer->entry.next != NULL as indication that the timer is
pending. So it does __list_del(), entry->next = NULL instead of list_del()
when the timer is deleted.

The ->base field is used for hashed locking only, it is initialized
in init_timer() which sets ->base = per_cpu(tvec_bases). When the
tvec_bases.lock is locked, it means that all timers which are tied
to this base via timer->base are locked, and the base itself is locked
too.

So __run_timers/migrate_timers can safely modify all timers which could
be found on ->tvX lists (pending timers).

When the timer's base is locked, and the timer removed from ->entry list
(which means that _run_timers/migrate_timers can't see this timer), it is
possible to set timer->base = NULL and drop the lock: the timer remains
locked.

This patch adds lock_timer_base() helper, which waits for ->base != NULL,
locks the ->base, and checks it is still the same.

__mod_timer() schedules the timer on the local CPU and changes it's base.
However, it does not lock both old and new bases at once. It locks the
timer via lock_timer_base(), deletes the timer, sets ->base = NULL, and
unlocks old base. Then __mod_timer() locks new_base, sets ->base = new_base,
and adds this timer. This simplifies the code, because AB-BA deadlock is not
possible. __mod_timer() also ensures that the timer's base is not changed
while the timer's handler is running on the old base.

__run_timers(), del_timer() do not change ->base anymore, they only clear
pending flag.

So del_timer_sync() can test timer->base->running_timer == timer to detect
whether it is running or not.

We don't need timer_list->lock anymore, this patch kills it.

We also don't need barriers. del_timer() and __run_timers() used smp_wmb()
before clearing timer's pending flag. It was needed because __mod_timer()
did not lock old_base if the timer is not pending, so __mod_timer()->list_add()
could race with del_timer()->list_del(). With this patch these functions are
serialized through base->lock.

One problem. TIMER_INITIALIZER can't use per_cpu(tvec_bases). So this patch
adds global

        struct timer_base_s {
                spinlock_t lock;
                struct timer_list *running_timer;
        } __init_timer_base;

which is used by TIMER_INITIALIZER. The corresponding fields in tvec_t_base_s
struct are replaced by struct timer_base_s t_base.

It is indeed ugly. But this can't have scalability problems. The global
__init_timer_base.lock is used only when __mod_timer() is called for the first
time AND the timer was compile time initialized. After that the timer migrates
to the local CPU.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Renaud Lienhart <renaud.lienhart@free.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:16 -07:00
Christoph Lameter
5912100372 [PATCH] i386: Selectable Frequency of the Timer Interrupt
Make the timer frequency selectable. The timer interrupt may cause bus
and memory contention in large NUMA systems since the interrupt occurs
on each processor HZ times per second.

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:10 -07:00
Paolo 'Blaisorblade' Giarrusso
b77d6adc92 [PATCH] uml: make hw_controller_type->release exist only for archs needing it
With Chris Wedgwood <cw@f00f.org>

As suggested by Chris, we can make the "just added" method ->release
conditional to UML only (better: to archs requesting it, i.e.  only UML
currently), so that other archs don't get this unneeded crud, and if UML
won't need it any more we can kill this.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:32 -07:00
Paolo 'Blaisorblade' Giarrusso
dbce706e25 [PATCH] uml: add and use generic hw_controller_type->release
With Chris Wedgwood <cw@f00f.org>

Currently UML must explicitly call the UML-specific
free_irq_by_irq_and_dev() for each free_irq call it's done.

This is needed because ->shutdown and/or ->disable are only called when the
last "action" for that irq is removed.

Instead, for UML shared IRQs (UML IRQs are very often, if not always,
shared), for each dev_id some setup is done, which must be cleared on the
release of that fd.  For instance, for each open console a new instance
(i.e.  new dev_id) of the same IRQ is requested().

Exactly, a fd is stored in an array (pollfds), which is after read by a
host thread and passed to poll().  Each event registered by poll() triggers
an interrupt.  So, for each free_irq() we must remove the corresponding
host fd from the table, which we do via this -release() method.

In this patch we add an appropriate hook for this, and remove all uses of
it by pointing the hook to the said procedure; this is safe to do since the
said procedure.

Also some cosmetic improvements are included.

This is heavily based on some work by Chris Wedgwood, which however didn't
get the patch merged for something I'd call a "misunderstanding" (the need
for this patch wasn't cleanly explained, thus adding the generic hook was
felt as undesirable).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:32 -07:00
Hugh Dickins
45918e1a8b [PATCH] dup_mmap: update comment on new vma
Remove part of comment on linking new vma in dup_mmap: since anon_vma rmap
came in, try_to_unmap_one knows the vma without needing find_vma.  But add
a comment to note that here vma is inserted without mmap_sem.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:19 -07:00
Wolfgang Wander
1363c3cd86 [PATCH] Avoiding mmap fragmentation
Ingo recently introduced a great speedup for allocating new mmaps using the
free_area_cache pointer which boosts the specweb SSL benchmark by 4-5% and
causes huge performance increases in thread creation.

The downside of this patch is that it does lead to fragmentation in the
mmap-ed areas (visible via /proc/self/maps), such that some applications
that work fine under 2.4 kernels quickly run out of memory on any 2.6
kernel.

The problem is twofold:

  1) the free_area_cache is used to continue a search for memory where
     the last search ended.  Before the change new areas were always
     searched from the base address on.

     So now new small areas are cluttering holes of all sizes
     throughout the whole mmap-able region whereas before small holes
     tended to close holes near the base leaving holes far from the base
     large and available for larger requests.

  2) the free_area_cache also is set to the location of the last
     munmap-ed area so in scenarios where we allocate e.g.  five regions of
     1K each, then free regions 4 2 3 in this order the next request for 1K
     will be placed in the position of the old region 3, whereas before we
     appended it to the still active region 1, placing it at the location
     of the old region 2.  Before we had 1 free region of 2K, now we only
     get two free regions of 1K -> fragmentation.

The patch addresses thes issues by introducing yet another cache descriptor
cached_hole_size that contains the largest known hole size below the
current free_area_cache.  If a new request comes in the size is compared
against the cached_hole_size and if the request can be filled with a hole
below free_area_cache the search is started from the base instead.

The results look promising: Whereas 2.6.12-rc4 fragments quickly and my
(earlier posted) leakme.c test program terminates after 50000+ iterations
with 96 distinct and fragmented maps in /proc/self/maps it performs nicely
(as expected) with thread creation, Ingo's test_str02 with 20000 threads
requires 0.7s system time.

Taking out Ingo's patch (un-patch available per request) by basically
deleting all mentions of free_area_cache from the kernel and starting the
search for new memory always at the respective bases we observe: leakme
terminates successfully with 11 distinctive hardly fragmented areas in
/proc/self/maps but thread creating is gringdingly slow: 30+s(!) system
time for Ingo's test_str02 with 20000 threads.

Now - drumroll ;-) the appended patch works fine with leakme: it ends with
only 7 distinct areas in /proc/self/maps and also thread creation seems
sufficiently fast with 0.71s for 20000 threads.

Signed-off-by: Wolfgang Wander <wwc@rentec.com>
Credit-to: "Richard Purdie" <rpurdie@rpsys.net>
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu> (partly)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:16 -07:00
Martin Hicks
753ee72896 [PATCH] VM: early zone reclaim
This is the core of the (much simplified) early reclaim.  The goal of this
patch is to reclaim some easily-freed pages from a zone before falling back
onto another zone.

One of the major uses of this is NUMA machines.  With the default allocator
behavior the allocator would look for memory in another zone, which might be
off-node, before trying to reclaim from the current zone.

This adds a zone tuneable to enable early zone reclaim.  It is selected on a
per-zone basis and is turned on/off via syscall.

Adding some extra throttling on the reclaim was also required (patch
4/4).  Without the machine would grind to a crawl when doing a "make -j"
kernel build.  Even with this patch the System Time is higher on
average, but it seems tolerable.  Here are some numbers for kernbench
runs on a 2-node, 4cpu, 8Gig RAM Altix in the "make -j" run:

			wall  user   sys   %cpu  ctx sw.  sleeps
			----  ----   ---   ----   ------  ------
No patch		1009  1384   847   258   298170   504402
w/patch, no reclaim     880   1376   667   288   254064   396745
w/patch & reclaim       1079  1385   926   252   291625   548873

These numbers are the average of 2 runs of 3 "make -j" runs done right
after system boot.  Run-to-run variability for "make -j" is huge, so
these numbers aren't terribly useful except to seee that with reclaim
the benchmark still finishes in a reasonable amount of time.

I also looked at the NUMA hit/miss stats for the "make -j" runs and the
reclaim doesn't make any difference when the machine is thrashing away.

Doing a "make -j8" on a single node that is filled with page cache pages
takes 700 seconds with reclaim turned on and 735 seconds without reclaim
(due to remote memory accesses).

The simple zone_reclaim syscall program is at
http://www.bork.org/~mort/sgi/zone_reclaim.c

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:14 -07:00
Ingo Molnar
39c715b717 [PATCH] smp_processor_id() cleanup
This patch implements a number of smp_processor_id() cleanup ideas that
Arjan van de Ven and I came up with.

The previous __smp_processor_id/_smp_processor_id/smp_processor_id API
spaghetti was hard to follow both on the implementational and on the
usage side.

Some of the complexity arose from picking wrong names, some of the
complexity comes from the fact that not all architectures defined
__smp_processor_id.

In the new code, there are two externally visible symbols:

 - smp_processor_id(): debug variant.

 - raw_smp_processor_id(): nondebug variant. Replaces all existing
   uses of _smp_processor_id() and __smp_processor_id(). Defined
   by every SMP architecture in include/asm-*/smp.h.

There is one new internal symbol, dependent on DEBUG_PREEMPT:

 - debug_smp_processor_id(): internal debug variant, mapped to
                             smp_processor_id().

Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new
lib/smp_processor_id.c file.  All related comments got updated and/or
clarified.

I have build/boot tested the following 8 .config combinations on x86:

 {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT}

I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT.  (Other
architectures are untested, but should work just fine.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:13 -07:00
Dmitry Torokhov
70f2817a43 [PATCH] sysfs: (rest) if show/store is missing return -EIO
sysfs: fix the rest of the kernel so if an attribute doesn't
       implement show or store method read/write will return
       -EIO instead of 0 or -EINVAL or -EPERM.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:03 -07:00
David Woodhouse
0107b3cf32 Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-06-18 08:36:46 +01:00
Ingo Molnar
caf2857ac6 [PATCH] timer exit cleanup
Do all timer zapping in exit_itimers.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-17 10:03:50 -07:00
Jan Kara
6df3cecbb9 [PATCH] cond_resched_lock() fix
On one path, cond_resched_lock() fails to return true if it dropped the lock.
We think this might be causing the crashes in JBD's log_do_checkpoint().

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-13 20:58:58 -07:00
David Woodhouse
1c3f45ab2f Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-06-02 16:39:11 +01:00
Roman Zippel
ae92ef8a44 [PATCH] flush icache in correct context
flush_icache_range() is used in two different situation - in binfmt_elf.c &
co for user space mappings and module.c for kernel modules.  On m68k
flush_icache_range() doesn't know which data to flush, as it has separate
address spaces and the pointer argument can be valid in either address
space.

First I considered splitting flush_icache_range(), but this patch is
simpler.  Setting the correct context gives flush_icache_range() enough
information to flush the correct data.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-31 14:54:18 -07:00
John Hawkes
b60c1f6ffd [PATCH] drop note_interrupt() for per-CPU for proper scaling
The "unhandled interrupts" catcher, note_interrupt(), increments a global
desc->irq_count and grossly damages scaling of very large systems, e.g.,
>192p ia64 Altix, because of this highly contented cacheline, especially
for timer interrupts.  384p is severely crippled, and 512p is unuseable.

All calls to note_interrupt() can be disabled by booting with "noirqdebug",
but this disables the useful interrupt checking for all interrupts.

I propose eliminating note_interrupt() for all per-CPU interrupts.  This
was the behavior of linux-2.6.10 and earlier, but in 2.6.11 a code
restructuring added a call to note_interrupt() for per-CPU interrupts.
Besides, note_interrupt() is a bit racy for concurrent CPU calls anyway, as
the desc->irq_count++ increment isn't atomic (which, if done, would make
scaling even worse).

Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-28 11:14:00 -07:00
Paul Jackson
2efe86b809 [PATCH] cpuset exit NULL dereference fix
There is a race in the kernel cpuset code, between the code
to handle notify_on_release, and the code to remove a cpuset.
The notify_on_release code can end up trying to access a
cpuset that has been removed.  In the most common case, this
causes a NULL pointer dereference from the routine cpuset_path.
However all manner of bad things are possible, in theory at least.

The existing code decrements the cpuset use count, and if the
count goes to zero, processes the notify_on_release request,
if appropriate.  However, once the count goes to zero, unless we
are holding the global cpuset_sem semaphore, there is nothing to
stop another task from immediately removing the cpuset entirely,
and recycling its memory.

The obvious fix would be to always hold the cpuset_sem
semaphore while decrementing the use count and dealing with
notify_on_release.  However we don't want to force a global
semaphore into the mainline task exit path, as that might create
a scaling problem.

The actual fix is almost as easy - since this is only an issue
for cpusets using notify_on_release, which the top level big
cpusets don't normally need to use, only take the cpuset_sem
for cpusets using notify_on_release.

This code has been run for hours without a hiccup, while running
a cpuset create/destroy stress test that could crash the existing
kernel in seconds.  This patch applies to the current -linus
git kernel.

Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Simon Derr <simon.derr@bull.net>
Acked-by: Dinakar Guniguntala <dino@in.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-27 08:07:26 -07:00
David Woodhouse
8f37d47c9b AUDIT: Record working directory when syscall arguments are pathnames
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-27 12:17:28 +01:00
David Woodhouse
7551ced334 AUDIT: Defer freeing aux items until audit_free_context()
While they were all just simple blobs it made sense to just free them
as we walked through and logged them. Now that there are pointers to
other objects which need refcounting, we might as well revert to
_only_ logging them in audit_log_exit(), and put the code to free them
properly in only one place -- in audit_free_aux().

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
----------------------------------------------------------
2005-05-26 12:04:57 +01:00
Kirill Korotaev
c33880aadd [PATCH] sigkill priority fix
If SIGKILL does not have priority, we cannot instantly kill task before it
makes some unexpected job.  It can be critical, but we were unable to
reproduce this easily until Heiko Carstens <Heiko.Carstens@de.ibm.com>
reported this problem on LKML.

Signed-Off-By: Kirill Korotaev <dev@sw.ru>
Signed-Off-By: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-24 20:08:13 -07:00
David Woodhouse
99e45eeac8 AUDIT: Escape comm when logging task info
It comes from the user; it needs to be escaped.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-23 21:57:41 +01:00
David Woodhouse
bccf6ae083 AUDIT: Unify auid reporting, put arch before syscall number
These changes make processing of audit logs easier. Based on a patch
from Steve Grubb <sgrubb@redhat.com>

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-23 21:35:28 +01:00
David Woodhouse
bfb4496e72 AUDIT: Assign serial number to non-syscall messages
Move audit_serial() into audit.c and use it to generate serial numbers 
on messages even when there is no audit context from syscall auditing.  
This allows us to disambiguate audit records when more than one is 
generated in the same millisecond.

Based on a patch by Steve Grubb after he observed the problem.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21 21:08:09 +01:00
Samuel Thibault
10f02d1c59 [PATCH] spin_unlock_bh() and preempt_check_resched()
In _spin_unlock_bh(lock):
	do { \
		_raw_spin_unlock(lock); \
		preempt_enable(); \
		local_bh_enable(); \
		__release(lock); \
	} while (0)

there is no reason for using preempt_enable() instead of a simple
preempt_enable_no_resched()

Since we know bottom halves are disabled, preempt_schedule() will always
return at once (preempt_count!=0), and hence preempt_check_resched() is
useless here...

This fixes it by using "preempt_enable_no_resched()" instead of the
"preempt_enable()", and thus avoids the useless preempt_check_resched()
just before re-enabling bottom halves.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-21 10:46:48 -07:00
Steve Grubb
326e9c8ba6 AUDIT: Fix inconsistent use of loginuid vs. auid, signed vs. unsigned
The attached patch changes all occurrences of loginuid to auid. It also 
changes everything to %u that is an unsigned type.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21 00:22:31 +01:00
Steve Grubb
05474106a4 AUDIT: Fix AVC_USER message passing.
The original AVC_USER message wasn't consolidated with the new range of
user messages. The attached patch fixes the kernel so the old messages 
work again.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21 00:18:37 +01:00
Stephen Smalley
011161051b AUDIT: Avoid sleeping function in SElinux AVC audit.
This patch changes the SELinux AVC to defer logging of paths to the audit
framework upon syscall exit, by saving a reference to the (dentry,vfsmount)
pair in an auxiliary audit item on the current audit context for processing
by audit_log_exit.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21 00:15:52 +01:00
Paul Jackson
b39c4fab25 [PATCH] cpusets+hotplug+preepmt broken
This patch removes the entwining of cpusets and hotplug code in the "No
more Mr.  Nice Guy" case of sched.c move_task_off_dead_cpu().

Since the hotplug code is holding a spinlock at this point, we cannot take
the cpuset semaphore, cpuset_sem, as would seem to be required either to
update the tasks cpuset, or to scan up the nested cpuset chain, looking for
the nearest cpuset ancestor that still has some CPUs that are online.  So
we just punt and blast the tasks cpus_allowed with all bits allowed.

This reverts these lines of code to what they were before the cpuset patch.
 And it updates the cpuset Doc file, to match.

The one known alternative to this that seems to work came from Dinakar
Guniguntala, and required the hotplug code to take the cpuset_sem semaphore
much earlier in its processing.  So far as we know, the increased locking
entanglement between cpusets and hot plug of this alternative approach is
not worth doing in this case.

Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Dinakar Guniguntala <dino@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-20 15:48:19 -07:00
David Woodhouse
fb19b4c6aa AUDIT: Honour audit_backlog_limit again.
The limit on the number of outstanding audit messages was inadvertently
removed with the switch to queuing skbs directly for sending by a kernel
thread. Put it back again.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-19 14:55:56 +01:00
David Woodhouse
7063e6c717 Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-05-19 11:54:00 +01:00
David Woodhouse
7ca0026495 AUDIT: Quis Custodiet Ipsos Custodes?
Nobody does. Really, it gets very silly if auditd is recording its
own actions.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-19 11:23:13 +01:00
David Woodhouse
b7d1125817 AUDIT: Send netlink messages from a separate kernel thread
netlink_unicast() will attempt to reallocate and will free messages if
the socket's rcvbuf limit is reached unless we give it an infinite 
timeout. So do that, from a kernel thread which is dedicated to spewing
stuff up the netlink socket.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-19 10:56:58 +01:00
Steve Grubb
168b717395 AUDIT: Clean up logging of untrusted strings
* If vsnprintf returns -1, it will mess up the sk buffer space accounting. 
This is fixed by not calling skb_put with bogus len values.

* audit_log_hex was a loop that called audit_log_vformat with %02X for each 
character. This is very inefficient since conversion from unsigned character 
to Ascii representation is essentially masking, shifting, and byte lookups. 
Also, the length of the converted string is well known - it's twice the 
original. Fixed by rewriting the function.

* audit_log_untrustedstring had no comments. This makes it hard for 
someone to understand what the string format will be.

* audit_log_d_path was never fixed to use untrustedstring. This could mess
up user space parsers. This was fixed to make a temp buffer, call d_path, 
and log temp buffer using untrustedstring. 

From: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-19 10:24:22 +01:00
David Woodhouse
209aba0324 AUDIT: Treat all user messages identically.
It's silly to have to add explicit entries for new userspace messages
as we invent them. Just treat all messages in the user range the same.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-18 10:21:07 +01:00
David Brownell
82428b62aa [PATCH] Driver Core: pm diagnostics update, check for errors
This patch includes various tweaks in the messaging that appears during
system pm state transitions:

  * Warn about certain illegal calls in the device tree, like resuming
    child before parent or suspending parent before child.  This could
    happen easily enough through sysfs, or in some cases when drivers
    use device_pm_set_parent().

  * Be more consistent about dev_dbg() tracing ... do it for resume() and
    shutdown() too, and never if the driver doesn't have that method.

  * Say which type of system sleep state is being entered.

Except for the warnings, these only affect debug messaging.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17 14:54:54 -07:00
William Lee Irwin III
dfaa9c94b1 [PATCH] profile.c: `schedule' parsing fix
profile=schedule parsing is not quite what it should be.  First, str[7] is
'e', not ',', but then even if it did fall through, prof_on =
SCHED_PROFILING would be clobbered inside if (get_option(...)) So a small
amount of rearrangement is done in this patch to correct it.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:21 -07:00
Matt Mackall
3c0547ba8b [PATCH] add_preferred_console() build fix
Move add_preferred_console out of CONFIG_PRINTK so serial console does the
right thing.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:19 -07:00