From 2566706ac6393386a4e7c4ce23fe17f4c98d9aa0 Mon Sep 17 00:00:00 2001 From: Sergey Shtylyov Date: Sat, 13 Aug 2022 23:34:16 +0300 Subject: [PATCH 01/56] of: fdt: fix off-by-one error in unflatten_dt_nodes() [ Upstream commit 2f945a792f67815abca26fa8a5e863ccf3fa1181 ] Commit 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree") forgot to fix up the depth check in the loop body in unflatten_dt_nodes() which makes it possible to overflow the nps[] buffer... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree") Signed-off-by: Sergey Shtylyov Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/7c354554-006f-6b31-c195-cdfe4caee392@omp.ru Signed-off-by: Sasha Levin --- drivers/of/fdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index 9fecac72c358..7c284ca0212c 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -392,7 +392,7 @@ static int unflatten_dt_nodes(const void *blob, for (offset = 0; offset >= 0 && depth >= initial_depth; offset = fdt_next_node(blob, offset, &depth)) { - if (WARN_ON_ONCE(depth >= FDT_MAX_DEPTH)) + if (WARN_ON_ONCE(depth >= FDT_MAX_DEPTH - 1)) continue; if (!IS_ENABLED(CONFIG_OF_KOBJ) && From 694fc76bfed6dfe29ad02e528509fa74b5ac76be Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Tue, 6 Sep 2022 12:54:31 +0200 Subject: [PATCH 02/56] gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 279c12df8d2efb28def9d037f288cbfb97c30fe2 ] Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in mpc512x via falling edge type. Do same for mpc85xx which support was added in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio"). Fixes probing of lm90 hwmon driver on mpc85xx based board which use level interrupt. Without it kernel prints error and refuse lm90 to work: [ 15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8) [ 15.267168] lm90 0-004c: cannot request IRQ 49 [ 15.272708] lm90: probe of 0-004c failed with error -22 Fixes: 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio") Signed-off-by: Pali Rohár Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin --- drivers/gpio/gpio-mpc8xxx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c index 1899d172590b..546f8c453add 100644 --- a/drivers/gpio/gpio-mpc8xxx.c +++ b/drivers/gpio/gpio-mpc8xxx.c @@ -168,6 +168,7 @@ static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type) switch (flow_type) { case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_LEVEL_LOW: raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags); gc->write_reg(mpc8xxx_gc->regs + GPIO_ICR, gc->read_reg(mpc8xxx_gc->regs + GPIO_ICR) From 63408525dc1331d6644c92273d34083be6dc0102 Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Thu, 8 Sep 2022 16:51:03 +0100 Subject: [PATCH 03/56] drm/meson: Correct OSD1 global alpha value [ Upstream commit 6836829c8ea453c9e3e518e61539e35881c8ed5f ] VIU_OSD1_CTRL_STAT.GLOBAL_ALPHA is a 9 bit field, so the maximum value is 0x100 not 0xff. This matches the vendor kernel. Signed-off-by: Stuart Menefy Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20220908155103.686904-1-stuart.menefy@mathembedded.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/meson/meson_plane.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c index c7daae53fa1f..26ff2dc56419 100644 --- a/drivers/gpu/drm/meson/meson_plane.c +++ b/drivers/gpu/drm/meson/meson_plane.c @@ -101,7 +101,7 @@ static void meson_plane_atomic_update(struct drm_plane *plane, /* Enable OSD and BLK0, set max global alpha */ priv->viu.osd1_ctrl_stat = OSD_ENABLE | - (0xFF << OSD_GLOBAL_ALPHA_SHIFT) | + (0x100 << OSD_GLOBAL_ALPHA_SHIFT) | OSD_BLK0_ENABLE; /* Set up BLK0 to point to the right canvas */ From cb9c98e43795ef7513fa21a299b8c178ab47dc1f Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Wed, 24 Aug 2022 17:36:57 +0800 Subject: [PATCH 04/56] parisc: ccio-dma: Add missing iounmap in error path in ccio_probe() [ Upstream commit 38238be4e881a5d0abbe4872b4cd6ed790be06c8 ] Add missing iounmap() before return from ccio_probe(), if ccio_init_resources() fails. Fixes: d46c742f827f ("parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()") Signed-off-by: Yang Yingliang Signed-off-by: Helge Deller Signed-off-by: Sasha Levin --- drivers/parisc/ccio-dma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 73ee74d6e7a3..2c763f9d75df 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1555,6 +1555,7 @@ static int __init ccio_probe(struct parisc_device *dev) } ccio_ioc_init(ioc); if (ccio_init_resources(ioc)) { + iounmap(ioc->ioc_regs); kfree(ioc); return -ENOMEM; } From 17f121ca3ec6be0fb32d77c7f65362934a38cc8e Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Fri, 12 Aug 2022 14:03:17 -0700 Subject: [PATCH 05/56] nvmet: fix a use-after-free [ Upstream commit 6a02a61e81c231cc5c680c5dbf8665275147ac52 ] Fix the following use-after-free complaint triggered by blktests nvme/004: BUG: KASAN: user-memory-access in blk_mq_complete_request_remote+0xac/0x350 Read of size 4 at addr 0000607bd1835943 by task kworker/13:1/460 Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] Call Trace: show_stack+0x52/0x58 dump_stack_lvl+0x49/0x5e print_report.cold+0x36/0x1e2 kasan_report+0xb9/0xf0 __asan_load4+0x6b/0x80 blk_mq_complete_request_remote+0xac/0x350 nvme_loop_queue_response+0x1df/0x275 [nvme_loop] __nvmet_req_complete+0x132/0x4f0 [nvmet] nvmet_req_complete+0x15/0x40 [nvmet] nvmet_execute_io_connect+0x18a/0x1f0 [nvmet] nvme_loop_execute_work+0x20/0x30 [nvme_loop] process_one_work+0x56e/0xa70 worker_thread+0x2d1/0x640 kthread+0x183/0x1c0 ret_from_fork+0x1f/0x30 Cc: stable@vger.kernel.org Fixes: a07b4970f464 ("nvmet: add a generic NVMe target") Signed-off-by: Bart Van Assche Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin --- drivers/nvme/target/core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c index 1a35d73c39c3..80b5aae1bdc9 100644 --- a/drivers/nvme/target/core.c +++ b/drivers/nvme/target/core.c @@ -504,6 +504,7 @@ static void __nvmet_req_complete(struct nvmet_req *req, u16 status) { u32 old_sqhd, new_sqhd; u16 sqhd; + struct nvmet_ns *ns = req->ns; if (status) nvmet_set_status(req, status); @@ -520,9 +521,9 @@ static void __nvmet_req_complete(struct nvmet_req *req, u16 status) req->rsp->sq_id = cpu_to_le16(req->sq->qid); req->rsp->command_id = req->cmd->common.command_id; - if (req->ns) - nvmet_put_namespace(req->ns); req->ops->queue_response(req); + if (ns) + nvmet_put_namespace(ns); } void nvmet_req_complete(struct nvmet_req *req, u16 status) From fe9302b4087f584eebb7f0c5d1024d76662db47e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sat, 10 Aug 2019 12:17:28 +0200 Subject: [PATCH 06/56] mvpp2: no need to check return value of debugfs_create functions [ Upstream commit e6882aa623f6fe0d80fa82ebf3ee78c353bffbe1 ] When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: "David S. Miller" Cc: Maxime Chevallier Cc: Nick Desaulniers Cc: Nathan Huckleberry Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: David S. Miller Stable-dep-of: fe2c9c61f668 ("net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()") Signed-off-by: Sasha Levin --- .../ethernet/marvell/mvpp2/mvpp2_debugfs.c | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_debugfs.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_debugfs.c index f9744a61e5dd..87d9cbe10cec 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_debugfs.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_debugfs.c @@ -484,8 +484,6 @@ static int mvpp2_dbgfs_flow_port_init(struct dentry *parent, struct dentry *port_dir; port_dir = debugfs_create_dir(port->dev->name, parent); - if (IS_ERR(port_dir)) - return PTR_ERR(port_dir); /* This will be freed by 'hash_opts' release op */ port_entry = kmalloc(sizeof(*port_entry), GFP_KERNEL); @@ -515,8 +513,6 @@ static int mvpp2_dbgfs_flow_entry_init(struct dentry *parent, sprintf(flow_entry_name, "%02d", flow); flow_entry_dir = debugfs_create_dir(flow_entry_name, parent); - if (!flow_entry_dir) - return -ENOMEM; /* This will be freed by 'type' release op */ entry = kmalloc(sizeof(*entry), GFP_KERNEL); @@ -554,8 +550,6 @@ static int mvpp2_dbgfs_flow_init(struct dentry *parent, struct mvpp2 *priv) int i, ret; flow_dir = debugfs_create_dir("flows", parent); - if (!flow_dir) - return -ENOMEM; for (i = 0; i < MVPP2_N_FLOWS; i++) { ret = mvpp2_dbgfs_flow_entry_init(flow_dir, priv, i); @@ -579,8 +573,6 @@ static int mvpp2_dbgfs_prs_entry_init(struct dentry *parent, sprintf(prs_entry_name, "%03d", tid); prs_entry_dir = debugfs_create_dir(prs_entry_name, parent); - if (!prs_entry_dir) - return -ENOMEM; /* The 'valid' entry's ops will free that */ entry = kmalloc(sizeof(*entry), GFP_KERNEL); @@ -618,8 +610,6 @@ static int mvpp2_dbgfs_prs_init(struct dentry *parent, struct mvpp2 *priv) int i, ret; prs_dir = debugfs_create_dir("parser", parent); - if (!prs_dir) - return -ENOMEM; for (i = 0; i < MVPP2_PRS_TCAM_SRAM_SIZE; i++) { ret = mvpp2_dbgfs_prs_entry_init(prs_dir, priv, i); @@ -636,8 +626,6 @@ static int mvpp2_dbgfs_port_init(struct dentry *parent, struct dentry *port_dir; port_dir = debugfs_create_dir(port->dev->name, parent); - if (IS_ERR(port_dir)) - return PTR_ERR(port_dir); debugfs_create_file("parser_entries", 0444, port_dir, port, &mvpp2_dbgfs_port_parser_fops); @@ -671,15 +659,10 @@ void mvpp2_dbgfs_init(struct mvpp2 *priv, const char *name) int ret, i; mvpp2_root = debugfs_lookup(MVPP2_DRIVER_NAME, NULL); - if (!mvpp2_root) { + if (!mvpp2_root) mvpp2_root = debugfs_create_dir(MVPP2_DRIVER_NAME, NULL); - if (IS_ERR(mvpp2_root)) - return; - } mvpp2_dir = debugfs_create_dir(name, mvpp2_root); - if (IS_ERR(mvpp2_dir)) - return; priv->dbgfs_dir = mvpp2_dir; From 9922d8abb347ee2f74fe5800cb5f2e2c243856f1 Mon Sep 17 00:00:00 2001 From: Stefan Metzmacher Date: Wed, 14 Sep 2022 05:25:46 +0200 Subject: [PATCH 07/56] cifs: don't send down the destination address to sendmsg for a SOCK_STREAM commit 17d3df38dc5f4cec9b0ac6eb79c1859b6e2693a4 upstream. This is ignored anyway by the tcp layer. Signed-off-by: Stefan Metzmacher Cc: stable@vger.kernel.org Reviewed-by: Ronnie Sahlberg Reviewed-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman --- fs/cifs/transport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 59643acb6d67..3f9029cf09fc 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -168,8 +168,8 @@ smb_send_kvec(struct TCP_Server_Info *server, struct msghdr *smb_msg, *sent = 0; - smb_msg->msg_name = (struct sockaddr *) &server->dstaddr; - smb_msg->msg_namelen = sizeof(struct sockaddr); + smb_msg->msg_name = NULL; + smb_msg->msg_namelen = 0; smb_msg->msg_control = NULL; smb_msg->msg_controllen = 0; if (server->noblocksnd) From e771465b5001097520707a2c49ce68cc8d951c5c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 23 Aug 2022 10:09:57 +0200 Subject: [PATCH 08/56] ASoC: nau8824: Fix semaphore unbalance at error paths [ Upstream commit 5628560e90395d3812800a8e44a01c32ffa429ec ] The semaphore of nau8824 wasn't properly unlocked at some error handling code paths, hence this may result in the unbalance (and potential lock-up). Fix them to handle the semaphore up properly. Signed-off-by: Takashi Iwai Link: https://lore.kernel.org/r/20220823081000.2965-3-tiwai@suse.de Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/codecs/nau8824.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/sound/soc/codecs/nau8824.c b/sound/soc/codecs/nau8824.c index 4af87340b165..4f18bb272e92 100644 --- a/sound/soc/codecs/nau8824.c +++ b/sound/soc/codecs/nau8824.c @@ -1075,6 +1075,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, struct snd_soc_component *component = dai->component; struct nau8824 *nau8824 = snd_soc_component_get_drvdata(component); unsigned int val_len = 0, osr, ctrl_val, bclk_fs, bclk_div; + int err = -EINVAL; nau8824_sema_acquire(nau8824, HZ); @@ -1091,7 +1092,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, osr &= NAU8824_DAC_OVERSAMPLE_MASK; if (nau8824_clock_check(nau8824, substream->stream, nau8824->fs, osr)) - return -EINVAL; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_CLK_DIVIDER, NAU8824_CLK_DAC_SRC_MASK, osr_dac_sel[osr].clk_src << NAU8824_CLK_DAC_SRC_SFT); @@ -1101,7 +1102,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, osr &= NAU8824_ADC_SYNC_DOWN_MASK; if (nau8824_clock_check(nau8824, substream->stream, nau8824->fs, osr)) - return -EINVAL; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_CLK_DIVIDER, NAU8824_CLK_ADC_SRC_MASK, osr_adc_sel[osr].clk_src << NAU8824_CLK_ADC_SRC_SFT); @@ -1122,7 +1123,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, else if (bclk_fs <= 256) bclk_div = 0; else - return -EINVAL; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_2, NAU8824_I2S_LRC_DIV_MASK | NAU8824_I2S_BLK_DIV_MASK, @@ -1143,15 +1144,17 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, val_len |= NAU8824_I2S_DL_32; break; default: - return -EINVAL; + goto error; } regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_1, NAU8824_I2S_DL_MASK, val_len); + err = 0; + error: nau8824_sema_release(nau8824); - return 0; + return err; } static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) @@ -1160,8 +1163,6 @@ static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) struct nau8824 *nau8824 = snd_soc_component_get_drvdata(component); unsigned int ctrl1_val = 0, ctrl2_val = 0; - nau8824_sema_acquire(nau8824, HZ); - switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBM_CFM: ctrl2_val |= NAU8824_I2S_MS_MASTER; @@ -1203,6 +1204,8 @@ static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) return -EINVAL; } + nau8824_sema_acquire(nau8824, HZ); + regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_1, NAU8824_I2S_DF_MASK | NAU8824_I2S_BP_MASK | NAU8824_I2S_PCMB_EN, ctrl1_val); From 4863a2db387a3ae1a79de33febe0807f2a0b87f7 Mon Sep 17 00:00:00 2001 From: Xiaolei Wang Date: Thu, 25 Aug 2022 19:19:22 +0800 Subject: [PATCH 09/56] regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe() [ Upstream commit 78e1e867f44e6bdc72c0e6a2609a3407642fb30b ] The pfuze_chip::regulator_descs is an array of size PFUZE100_MAX_REGULATOR, the pfuze_chip::pfuze_regulators is the pointer to the real regulators of a specific device. The number of real regulator is supposed to be less than the PFUZE100_MAX_REGULATOR, so we should use the size of 'regulator_num * sizeof(struct pfuze_regulator)' in memcpy(). This fixes the out of bounds access bug reported by KASAN. Signed-off-by: Xiaolei Wang Link: https://lore.kernel.org/r/20220825111922.1368055-1-xiaolei.wang@windriver.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/regulator/pfuze100-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 8b1940110561..b1d73a6c7809 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -710,7 +710,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, ((pfuze_chip->chip_id == PFUZE3000) ? "3000" : "3001")))); memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators, - sizeof(pfuze_chip->regulator_descs)); + regulator_num * sizeof(struct pfuze_regulator)); ret = pfuze_parse_regulators_dt(pfuze_chip); if (ret) From e8807abdaeba1e7ae308fb5eeb33593719c47078 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 6 May 2022 23:55:21 +0100 Subject: [PATCH 10/56] rxrpc: Fix local destruction being repeated [ Upstream commit d3d863036d688313f8d566b87acd7d99daf82749 ] If the local processor work item for the rxrpc local endpoint gets requeued by an event (such as an incoming packet) between it getting scheduled for destruction and the UDP socket being closed, the rxrpc_local_destroyer() function can get run twice. The second time it can hang because it can end up waiting for cleanup events that will never happen. Signed-off-by: David Howells Signed-off-by: Sasha Levin --- net/rxrpc/local_object.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/rxrpc/local_object.c b/net/rxrpc/local_object.c index fe190a691872..5a01479aae3f 100644 --- a/net/rxrpc/local_object.c +++ b/net/rxrpc/local_object.c @@ -452,6 +452,9 @@ static void rxrpc_local_processor(struct work_struct *work) container_of(work, struct rxrpc_local, processor); bool again; + if (local->dead) + return; + trace_rxrpc_local(local->debug_id, rxrpc_local_processing, atomic_read(&local->usage), NULL); From afcf676d41e091f35fa708bfc90145231f71146a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 4 Sep 2022 09:27:50 +0200 Subject: [PATCH 11/56] ALSA: hda/sigmatel: Keep power up while beep is enabled [ Upstream commit 414d38ba871092aeac4ed097ac4ced89486646f7 ] It seems that the beep playback doesn't work well on IDT codec devices when the codec auto-pm is enabled. Keep the power on while the beep switch is enabled. Link: https://bugzilla.suse.com/show_bug.cgi?id=1200544 Link: https://lore.kernel.org/r/20220904072750.26164-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin --- sound/pci/hda/patch_sigmatel.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 85c33f528d7b..2f6e4e3afd8f 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -222,6 +222,7 @@ struct sigmatel_spec { /* beep widgets */ hda_nid_t anabeep_nid; + bool beep_power_on; /* SPDIF-out mux */ const char * const *spdif_labels; @@ -4463,6 +4464,26 @@ static int stac_suspend(struct hda_codec *codec) stac_shutup(codec); return 0; } + +static int stac_check_power_status(struct hda_codec *codec, hda_nid_t nid) +{ + struct sigmatel_spec *spec = codec->spec; + int ret = snd_hda_gen_check_power_status(codec, nid); + +#ifdef CONFIG_SND_HDA_INPUT_BEEP + if (nid == spec->gen.beep_nid && codec->beep) { + if (codec->beep->enabled != spec->beep_power_on) { + spec->beep_power_on = codec->beep->enabled; + if (spec->beep_power_on) + snd_hda_power_up_pm(codec); + else + snd_hda_power_down_pm(codec); + } + ret |= spec->beep_power_on; + } +#endif + return ret; +} #else #define stac_suspend NULL #endif /* CONFIG_PM */ @@ -4475,6 +4496,7 @@ static const struct hda_codec_ops stac_patch_ops = { .unsol_event = snd_hda_jack_unsol_event, #ifdef CONFIG_PM .suspend = stac_suspend, + .check_power_status = stac_check_power_status, #endif .reboot_notify = stac_shutup, }; From 03cff7a293552d931ed60d526b46d5491f3b27f1 Mon Sep 17 00:00:00 2001 From: "jerry.meng" Date: Mon, 5 Sep 2022 09:24:52 +0800 Subject: [PATCH 12/56] net: usb: qmi_wwan: add Quectel RM520N MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit e1091e226a2bab4ded1fe26efba2aee1aab06450 ] add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry.meng Acked-by: Bjørn Mork Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index fcf21a1ca776..8d10c29ba176 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1049,6 +1049,7 @@ static const struct usb_device_id products[] = { {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0512)}, /* Quectel EG12/EM12 */ {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0620)}, /* Quectel EM160R-GL */ {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0800)}, /* Quectel RM500Q-GL */ + {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0801)}, /* Quectel RM520N */ /* 3. Combined interface devices matching on interface number */ {QMI_FIXED_INTF(0x0408, 0xea42, 4)}, /* Yota / Megafon M100-1 */ From 1236c30a696c2835751b22d13a44d262eb293551 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Tue, 6 Sep 2022 11:59:43 +0200 Subject: [PATCH 13/56] MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping() [ Upstream commit ba912afbd611d3a5f22af247721a071ad1d5b9e0 ] For irq_domain_associate() to work the virq descriptor has to be pre-allocated in advance. Otherwise the following happens: WARNING: CPU: 0 PID: 0 at .../kernel/irq/irqdomain.c:527 irq_domain_associate+0x298/0x2e8 error: virq128 is not allocated Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.78-... #1 ... Call Trace: [] show_stack+0x9c/0x130 [] dump_stack+0x90/0xd0 [] __warn+0x118/0x130 [] warn_slowpath_fmt+0x4c/0x70 [] irq_domain_associate+0x298/0x2e8 [] octeon_irq_init_ciu+0x4c8/0x53c [] of_irq_init+0x1e0/0x388 [] init_IRQ+0x4c/0xf4 [] start_kernel+0x404/0x698 Use irq_alloc_desc_at() to avoid the above problem. Signed-off-by: Alexander Sverdlin Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin --- arch/mips/cavium-octeon/octeon-irq.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 43e4fc1b373c..3e5cf5515c01 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -127,6 +127,16 @@ static void octeon_irq_free_cd(struct irq_domain *d, unsigned int irq) static int octeon_irq_force_ciu_mapping(struct irq_domain *domain, int irq, int line, int bit) { + struct device_node *of_node; + int ret; + + of_node = irq_domain_get_of_node(domain); + if (!of_node) + return -EINVAL; + ret = irq_alloc_desc_at(irq, of_node_to_nid(of_node)); + if (ret < 0) + return ret; + return irq_domain_associate(domain, irq, line << 6 | bit); } From 0c39443579f6d79f697bae4b5344d4b25736537e Mon Sep 17 00:00:00 2001 From: Youling Tang Date: Thu, 1 Sep 2022 19:10:59 +0800 Subject: [PATCH 14/56] mksysmap: Fix the mismatch of 'L0' symbols in System.map [ Upstream commit c17a2538704f926ee4d167ba625e09b1040d8439 ] When System.map was generated, the kernel used mksysmap to filter the kernel symbols, we need to filter "L0" symbols in LoongArch architecture. $ cat System.map | grep L0 9000000000221540 t L0 The L0 symbol exists in System.map, but not in .tmp_System.map. When "cmp -s System.map .tmp_System.map" will show "Inconsistent kallsyms data" error message in link-vmlinux.sh script. Signed-off-by: Youling Tang Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin --- scripts/mksysmap | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/mksysmap b/scripts/mksysmap index 9aa23d15862a..ad8bbc52267d 100755 --- a/scripts/mksysmap +++ b/scripts/mksysmap @@ -41,4 +41,4 @@ # so we just ignore them to let readprofile continue to work. # (At least sparc64 has __crc_ in the middle). -$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( \.L\)' > $2 +$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( \.L\)\|\( L0\)' > $2 From a34547fc43d02f2662b2b62c9a4c578594cf662d Mon Sep 17 00:00:00 2001 From: Hyunwoo Kim Date: Mon, 20 Jun 2022 07:17:46 -0700 Subject: [PATCH 15/56] video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write [ Upstream commit a09d2d00af53b43c6f11e6ab3cb58443c2cac8a7 ] In pxa3xx_gcu_write, a count parameter of type size_t is passed to words of type int. Then, copy_from_user() may cause a heap overflow because it is used as the third argument of copy_from_user(). Signed-off-by: Hyunwoo Kim Signed-off-by: Helge Deller Signed-off-by: Sasha Levin --- drivers/video/fbdev/pxa3xx-gcu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/fbdev/pxa3xx-gcu.c b/drivers/video/fbdev/pxa3xx-gcu.c index 43695a33f062..aec0b85db5bf 100644 --- a/drivers/video/fbdev/pxa3xx-gcu.c +++ b/drivers/video/fbdev/pxa3xx-gcu.c @@ -394,7 +394,7 @@ pxa3xx_gcu_write(struct file *file, const char *buff, struct pxa3xx_gcu_batch *buffer; struct pxa3xx_gcu_priv *priv = to_pxa3xx_gcu_priv(file); - int words = count / 4; + size_t words = count / 4; /* Does not need to be atomic. There's a lock in user space, * but anyhow, this is just for statistics. */ From 7847174cf9c96433b58585bc4eabb5c1c75ec403 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 5 Sep 2022 15:06:30 +0200 Subject: [PATCH 16/56] ALSA: hda/sigmatel: Fix unused variable warning for beep power change commit 51bdc8bb82525cd70feb92279c8b7660ad7948dd upstream. The newly added stac_check_power_status() caused a compile warning when CONFIG_SND_HDA_INPUT_BEEP is disabled. Fix it. Fixes: 414d38ba8710 ("ALSA: hda/sigmatel: Keep power up while beep is enabled") Reported-by: kernel test robot Link: https://lore.kernel.org/r/20220905130630.2845-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 2f6e4e3afd8f..8d09312b2e42 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4467,7 +4467,9 @@ static int stac_suspend(struct hda_codec *codec) static int stac_check_power_status(struct hda_codec *codec, hda_nid_t nid) { +#ifdef CONFIG_SND_HDA_INPUT_BEEP struct sigmatel_spec *spec = codec->spec; +#endif int ret = snd_hda_gen_check_power_status(codec, nid); #ifdef CONFIG_SND_HDA_INPUT_BEEP From b8d66030b6c02fc666aee37562f5eff45ae05feb Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 11 Jun 2018 11:21:12 +0300 Subject: [PATCH 17/56] usb: dwc3: pci: Add Support for Intel Elkhart Lake Devices [ Upstream commit dbb0569de852fb4576d6f62078d515f989a181ca ] This patch simply adds a new PCI Device ID Signed-off-by: Felipe Balbi Stable-dep-of: bad0d1d726ac ("usb: dwc3: pci: Add support for Intel Raptor Lake") Signed-off-by: Sasha Levin --- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 527938eee846..5d5166373aa1 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -36,6 +36,7 @@ #define PCI_DEVICE_ID_INTEL_CNPH 0xa36e #define PCI_DEVICE_ID_INTEL_CNPV 0xa3b0 #define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee +#define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e #define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -351,6 +352,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICLLP), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_EHLLP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */ From 54a983da381be5879a35746f19b3931dc8b61364 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 13 Dec 2017 16:03:22 +0200 Subject: [PATCH 18/56] usb: dwc3: pci: add support for TigerLake Devices [ Upstream commit b3649dee5fbb0f6585010e6e9313dfcbb075b22b ] This patch adds the necessary PCI ID for TGP-LP devices. Signed-off-by: Felipe Balbi Stable-dep-of: bad0d1d726ac ("usb: dwc3: pci: Add support for Intel Raptor Lake") Signed-off-by: Sasha Levin --- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 5d5166373aa1..3ca582127f94 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -37,6 +37,7 @@ #define PCI_DEVICE_ID_INTEL_CNPV 0xa3b0 #define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee #define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e +#define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee #define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -355,6 +356,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_EHLLP), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPLP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */ From d91f00d88128343a9646ccdba1c7d5e5e414da88 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 25 Jun 2020 10:34:32 +0300 Subject: [PATCH 19/56] usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant [ Upstream commit c3f595a8119207cc0f82b3dc6ec5bbf6f3e6b135 ] This patch adds the necessary PCI ID for TGP-H devices. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi Stable-dep-of: bad0d1d726ac ("usb: dwc3: pci: Add support for Intel Raptor Lake") Signed-off-by: Sasha Levin --- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 3ca582127f94..cddf02add6f1 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -38,6 +38,7 @@ #define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee #define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e #define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee +#define PCI_DEVICE_ID_INTEL_TGPH 0x43ee #define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -359,6 +360,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPLP), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPH), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */ From 466a9509e116a9997c3bc7ae42e06276d984d75c Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Tue, 30 Jun 2020 15:24:59 +0300 Subject: [PATCH 20/56] usb: dwc3: pci: add support for the Intel Jasper Lake [ Upstream commit e25d1e8532c3d84f075deca1580a7d61e0f43ce6 ] This patch adds the necessary PCI ID for Intel Jasper Lake devices. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi Stable-dep-of: bad0d1d726ac ("usb: dwc3: pci: Add support for Intel Raptor Lake") Signed-off-by: Sasha Levin --- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index cddf02add6f1..125cecb1bc99 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -39,6 +39,7 @@ #define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e #define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee #define PCI_DEVICE_ID_INTEL_TGPH 0x43ee +#define PCI_DEVICE_ID_INTEL_JSP 0x4dee #define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -363,6 +364,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPH), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_JSP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */ From 84711f4580f32ecb0de6fcf62c6f079d426ae0e2 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Tue, 6 Oct 2020 16:02:50 +0300 Subject: [PATCH 21/56] usb: dwc3: pci: add support for the Intel Alder Lake-S [ Upstream commit 1384ab4fee12c4c4f8bd37bc9f8686881587b286 ] This patch adds the necessary PCI ID for Intel Alder Lake-S devices. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi Stable-dep-of: bad0d1d726ac ("usb: dwc3: pci: Add support for Intel Raptor Lake") Signed-off-by: Sasha Levin --- drivers/usb/dwc3/dwc3-pci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 125cecb1bc99..ec7063e63436 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -40,6 +40,7 @@ #define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee #define PCI_DEVICE_ID_INTEL_TGPH 0x43ee #define PCI_DEVICE_ID_INTEL_JSP 0x4dee +#define PCI_DEVICE_ID_INTEL_ADLS 0x7ae1 #define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -367,6 +368,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_JSP), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLS), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */ From 78a07732fbb0934d14827d8f09b9aa6a49ee1aa9 Mon Sep 17 00:00:00 2001 From: Siddh Raman Pant Date: Sat, 20 Aug 2022 01:33:40 +0530 Subject: [PATCH 22/56] wifi: mac80211: Fix UAF in ieee80211_scan_rx() [ Upstream commit 60deb9f10eec5c6a20252ed36238b55d8b614a2c ] ieee80211_scan_rx() tries to access scan_req->flags after a null check, but a UAF is observed when the scan is completed and __ieee80211_scan_completed() executes, which then calls cfg80211_scan_done() leading to the freeing of scan_req. Since scan_req is rcu_dereference()'d, prevent the racing in __ieee80211_scan_completed() by ensuring that from mac80211's POV it is no longer accessed from an RCU read critical section before we call cfg80211_scan_done(). Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?extid=f9acff9bf08a845f225d Reported-by: syzbot+f9acff9bf08a845f225d@syzkaller.appspotmail.com Suggested-by: Johannes Berg Signed-off-by: Siddh Raman Pant Link: https://lore.kernel.org/r/20220819200340.34826-1-code@siddh.me Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin --- net/mac80211/scan.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index de42bcfeda9c..e3d8be4feea5 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -412,10 +412,6 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) scan_req = rcu_dereference_protected(local->scan_req, lockdep_is_held(&local->mtx)); - if (scan_req != local->int_scan_req) { - local->scan_info.aborted = aborted; - cfg80211_scan_done(scan_req, &local->scan_info); - } RCU_INIT_POINTER(local->scan_req, NULL); scan_sdata = rcu_dereference_protected(local->scan_sdata, @@ -425,6 +421,13 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) local->scanning = 0; local->scan_chandef.chan = NULL; + synchronize_rcu(); + + if (scan_req != local->int_scan_req) { + local->scan_info.aborted = aborted; + cfg80211_scan_done(scan_req, &local->scan_info); + } + /* Set power back to normal operating levels. */ ieee80211_hw_config(local, 0); From 0a3b02659f698d3615c35e768fc8ed6bc5df34ca Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 1 Sep 2022 10:36:34 -0400 Subject: [PATCH 23/56] USB: core: Fix RST error in hub.c commit 766a96dc558385be735a370db867e302c8f22153 upstream. A recent commit added an invalid RST expression to a kerneldoc comment in hub.c. The fix is trivial. Fixes: 9c6d778800b9 ("USB: core: Prevent nested device-reset calls") Cc: Reported-by: Stephen Rothwell Reviewed-by: Bagas Sanjaya Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/YxDDcsLtRZ7c20pq@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 4d04c75ac381..d1a7f22cb3a9 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -5852,7 +5852,7 @@ re_enumerate_no_bos: * * Return: The same as for usb_reset_and_verify_device(). * However, if a reset is already in progress (for instance, if a - * driver doesn't have pre_ or post_reset() callbacks, and while + * driver doesn't have pre_reset() or post_reset() callbacks, and while * being unbound or re-bound during the ongoing reset its disconnect() * or probe() routine tries to perform a second, nested reset), the * routine returns -EINPROGRESS. From 978682612a3828ae6c787e16404476b4134adbca Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Carl=20Yin=28=E6=AE=B7=E5=BC=A0=E6=88=90=29?= Date: Fri, 2 Sep 2022 09:49:43 +0000 Subject: [PATCH 24/56] USB: serial: option: add Quectel BG95 0x0203 composition commit f8f67eff6847f9b8d753fa029723bcc54296055a upstream. Add support for the following Quectel BG95 composition: 0x0203: Diag + GNSS + Modem + ECM usb-devices output: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0203 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=71d3a21b C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Carl Yin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index fe4e340ac66e..12a54c800b59 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1138,6 +1138,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff), .driver_info = NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0203, 0xff), /* BG95-M3 */ + .driver_info = ZLP }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), From 45eb97eddd722b4ddf7fa535fe4780ee05dd4c4b Mon Sep 17 00:00:00 2001 From: jerry meng Date: Mon, 5 Sep 2022 14:35:33 +0800 Subject: [PATCH 25/56] USB: serial: option: add Quectel RM520N commit d640c4cb8f2f933c0ca896541f9de7fb1ae245f4 upstream. add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry meng Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 12a54c800b59..560e628912e5 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -256,6 +256,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EM060K 0x030b #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 +#define QUECTEL_PRODUCT_RM520N 0x0801 #define QUECTEL_PRODUCT_EC200S_CN 0x6002 #define QUECTEL_PRODUCT_EC200T 0x6026 #define QUECTEL_PRODUCT_RM500K 0x7001 @@ -1161,6 +1162,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), .driver_info = ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) }, From 446be2a4eeeaea7b1920dd1a829310b81097bd51 Mon Sep 17 00:00:00 2001 From: Mohan Kumar Date: Tue, 13 Sep 2022 11:06:41 +0530 Subject: [PATCH 26/56] ALSA: hda/tegra: set depop delay for tegra commit 3c4d8c24fb6c44f426e447b04800b0ed61a7b5ae upstream. Reduce the suspend time by setting depop delay to 10ms for tegra. Signed-off-by: Mohan Kumar Cc: Link: https://lore.kernel.org/r/20220913053641.23299-1-mkumard@nvidia.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index d21a4eb1ca49..cbd5118570fd 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -3455,6 +3455,7 @@ static int patch_tegra_hdmi(struct hda_codec *codec) if (err) return err; + codec->depop_delay = 10; codec->patch_ops.build_pcms = tegra_hdmi_build_pcms; spec = codec->spec; spec->chmap.ops.chmap_cea_alloc_validate_get_type = From 8b5f750caa8b1ed5db27e549d54396c8b2b20a98 Mon Sep 17 00:00:00 2001 From: Kai Vehmanen Date: Mon, 12 Sep 2022 21:37:16 +0300 Subject: [PATCH 27/56] ALSA: hda: add Intel 5 Series / 3400 PCI DID commit 4d40ceef4745536289012670103c59264e0fb3ec upstream. Handle 0x3b57 variant with same AZX_DCAPS_INTEL_PCH_NOPM capabilities as 0x3b56. In practise this allow use of HDMI/DP display audio via i915. BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/2751 Signed-off-by: Kai Vehmanen Cc: Link: https://lore.kernel.org/r/20220912183716.2126312-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/hda_intel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 686f0fed6f6e..d3d26be93cd2 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2634,6 +2634,8 @@ static const struct pci_device_id azx_ids[] = { /* 5 Series/3400 */ { PCI_DEVICE(0x8086, 0x3b56), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM }, + { PCI_DEVICE(0x8086, 0x3b57), + .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM }, /* Poulsbo */ { PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_BASE }, From f619a7b23eac9c386a7565a56060808c2d9533d2 Mon Sep 17 00:00:00 2001 From: Callum Osmotherly Date: Thu, 15 Sep 2022 22:36:08 +0930 Subject: [PATCH 28/56] ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop commit 1885ff13d4c42910b37a0e3f7c2f182520f4eed1 upstream. Just as with the 5570 (and the other Dell laptops), this enables the two subwoofer speakers on the Dell Precision 5530 together with the main ones, significantly increasing the audio quality. I've tested this myself on a 5530 and can confirm it's working as expected. Signed-off-by: Callum Osmotherly Cc: Link: https://lore.kernel.org/r/YyMjQO3mhyXlMbCf@piranha Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9670db6ad1e1..cb556390de22 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7081,6 +7081,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0871, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0872, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0873, "Dell Precision 3930", ALC255_FIXUP_DUMMY_LINEOUT_VERB), + SND_PCI_QUIRK(0x1028, 0x087d, "Dell Precision 5530", ALC289_FIXUP_DUAL_SPK), SND_PCI_QUIRK(0x1028, 0x08ad, "Dell WYSE AIO", ALC225_FIXUP_DELL_WYSE_AIO_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x08ae, "Dell WYSE NB", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0935, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB), From dac323266d4deba153e906a99d9e89d8d87905f9 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Tue, 20 Sep 2022 17:08:23 +0200 Subject: [PATCH 29/56] efi: libstub: check Shim mode using MokSBStateRT commit 5f56a74cc0a6d9b9f8ba89cea29cd7c4774cb2b1 upstream. We currently check the MokSBState variable to decide whether we should treat UEFI secure boot as being disabled, even if the firmware thinks otherwise. This is used by shim to indicate that it is not checking signatures on boot images. In the kernel, we use this to relax lockdown policies. However, in cases where shim is not even being used, we don't want this variable to interfere with lockdown, given that the variable may be non-volatile and therefore persist across a reboot. This means setting it once will persistently disable lockdown checks on a given system. So switch to the mirrored version of this variable, called MokSBStateRT, which is supposed to be volatile, and this is something we can check. Cc: # v4.19+ Signed-off-by: Ard Biesheuvel Reviewed-by: Ilias Apalodimas Reviewed-by: Peter Jones Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/efi/libstub/secureboot.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/firmware/efi/libstub/secureboot.c b/drivers/firmware/efi/libstub/secureboot.c index 72d9dfbebf08..ea03096033af 100644 --- a/drivers/firmware/efi/libstub/secureboot.c +++ b/drivers/firmware/efi/libstub/secureboot.c @@ -21,7 +21,7 @@ static const efi_char16_t efi_SetupMode_name[] = L"SetupMode"; /* SHIM variables */ static const efi_guid_t shim_guid = EFI_SHIM_LOCK_GUID; -static const efi_char16_t shim_MokSBState_name[] = L"MokSBState"; +static const efi_char16_t shim_MokSBState_name[] = L"MokSBStateRT"; #define get_efi_var(name, vendor, ...) \ efi_call_runtime(get_variable, \ @@ -60,8 +60,8 @@ enum efi_secureboot_mode efi_get_secureboot(efi_system_table_t *sys_table_arg) /* * See if a user has put the shim into insecure mode. If so, and if the - * variable doesn't have the runtime attribute set, we might as well - * honor that. + * variable doesn't have the non-volatile attribute set, we might as + * well honor that. */ size = sizeof(moksbstate); status = get_efi_var(shim_MokSBState_name, &shim_guid, @@ -70,7 +70,7 @@ enum efi_secureboot_mode efi_get_secureboot(efi_system_table_t *sys_table_arg) /* If it fails, we don't care why. Default to secure */ if (status != EFI_SUCCESS) goto secure_boot_enabled; - if (!(attr & EFI_VARIABLE_RUNTIME_ACCESS) && moksbstate == 1) + if (!(attr & EFI_VARIABLE_NON_VOLATILE) && moksbstate == 1) return efi_secureboot_mode_disabled; secure_boot_enabled: From e996821717c5cf8aa1e1abdb6b3d900a231e3755 Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Wed, 31 Aug 2022 22:54:54 +0800 Subject: [PATCH 30/56] mm/slub: fix to return errno if kmalloc() fails commit 7e9c323c52b379d261a72dc7bd38120a761a93cd upstream. In create_unique_id(), kmalloc(, GFP_KERNEL) can fail due to out-of-memory, if it fails, return errno correctly rather than triggering panic via BUG_ON(); kernel BUG at mm/slub.c:5893! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Call trace: sysfs_slab_add+0x258/0x260 mm/slub.c:5973 __kmem_cache_create+0x60/0x118 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x19c/0x31c mm/slab_common.c:335 kmem_cache_create+0x1c/0x28 mm/slab_common.c:390 f2fs_kmem_cache_create fs/f2fs/f2fs.h:2766 [inline] f2fs_init_xattr_caches+0x78/0xb4 fs/f2fs/xattr.c:808 f2fs_fill_super+0x1050/0x1e0c fs/f2fs/super.c:4149 mount_bdev+0x1b8/0x210 fs/super.c:1400 f2fs_mount+0x44/0x58 fs/f2fs/super.c:4512 legacy_get_tree+0x30/0x74 fs/fs_context.c:610 vfs_get_tree+0x40/0x140 fs/super.c:1530 do_new_mount+0x1dc/0x4e4 fs/namespace.c:3040 path_mount+0x358/0x914 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __arm64_sys_mount+0x2f8/0x408 fs/namespace.c:3568 Cc: Fixes: 81819f0fc8285 ("SLUB core") Reported-by: syzbot+81684812ea68216e08c5@syzkaller.appspotmail.com Reviewed-by: Muchun Song Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Chao Yu Acked-by: David Rientjes Signed-off-by: Vlastimil Babka Signed-off-by: Greg Kroah-Hartman --- mm/slub.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/mm/slub.c b/mm/slub.c index 0fefe0ad8f57..ef730ea8263c 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -5688,7 +5688,8 @@ static char *create_unique_id(struct kmem_cache *s) char *name = kmalloc(ID_STR_LENGTH, GFP_KERNEL); char *p = name; - BUG_ON(!name); + if (!name) + return ERR_PTR(-ENOMEM); *p++ = ':'; /* @@ -5770,6 +5771,8 @@ static int sysfs_slab_add(struct kmem_cache *s) * for the symlinks. */ name = create_unique_id(s); + if (IS_ERR(name)) + return PTR_ERR(name); } s->kobj.kset = kset; From 35cdca54e4ff70d4bffd10a22ef1fecc56911917 Mon Sep 17 00:00:00 2001 From: zain wang Date: Tue, 30 Aug 2022 13:16:17 -0700 Subject: [PATCH 31/56] arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz [ Upstream commit 8123437cf46ea5a0f6ca5cb3c528d8b6db97b9c2 ] We've found the AUX channel to be less reliable with PCLK_EDP at a higher rate (typically 25 MHz). This is especially important on systems with PSR-enabled panels (like Gru-Kevin), since we make heavy, constant use of AUX. According to Rockchip, using any rate other than 24 MHz can cause "problems between syncing the PHY an PCLK", which leads to all sorts of unreliabilities around register operations. Fixes: d67a38c5a623 ("arm64: dts: rockchip: move core edp from rk3399-kevin to shared chromebook") Reviewed-by: Douglas Anderson Signed-off-by: zain wang Signed-off-by: Brian Norris Link: https://lore.kernel.org/r/20220830131212.v2.1.I98d30623f13b785ca77094d0c0fd4339550553b6@changeid Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index ff81dfda3b95..3ba927f30347 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -232,6 +232,14 @@ &edp { status = "okay"; + /* + * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only + * set this here, because rk3399-gru.dtsi ensures we can generate this + * off GPLL=600MHz, whereas some other RK3399 boards may not. + */ + assigned-clocks = <&cru PCLK_EDP>; + assigned-clock-rates = <24000000>; + ports { edp_out: port@1 { reg = <1>; From d0dd2feda7b3f71f7094fb3bd74051596c1dcc39 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 27 Aug 2022 14:51:39 -0300 Subject: [PATCH 32/56] arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma [ Upstream commit a994b34b9abb9c08ee09e835b4027ff2147f9d94 ] The 'enable-active-low' property is not a valid one. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. Remove the invalid 'enable-active-low' property. Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM") Signed-off-by: Fabio Estevam Link: https://lore.kernel.org/r/20220827175140.1696699-1-festevam@denx.de Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index ce1320e4c106..6750b8100421 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -102,7 +102,6 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; - enable-active-low; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; From 9431ef7d832692b8c62af68d214dd5fedac3aa01 Mon Sep 17 00:00:00 2001 From: Igor Ryzhov Date: Wed, 5 Jun 2019 12:32:40 +0300 Subject: [PATCH 33/56] netfilter: nf_conntrack_sip: fix ct_sip_walk_headers [ Upstream commit 39aebedeaaa95757f5c1f2ddb5f43fdddbf478ca ] ct_sip_next_header and ct_sip_get_header return an absolute value of matchoff, not a shift from current dataoff. So dataoff should be assigned matchoff, not incremented by it. This issue can be seen in the scenario when there are multiple Contact headers and the first one is using a hostname and other headers use IP addresses. In this case, ct_sip_walk_headers will work as follows: The first ct_sip_get_header call to will find the first Contact header but will return -1 as the header uses a hostname. But matchoff will be changed to the offset of this header. After that, dataoff should be set to matchoff, so that the next ct_sip_get_header call find the next Contact header. But instead of assigning dataoff to matchoff, it is incremented by it, which is not correct, as matchoff is an absolute value of the offset. So on the next call to the ct_sip_get_header, dataoff will be incorrect, and the next Contact header may not be found at all. Fixes: 05e3ced297fe ("[NETFILTER]: nf_conntrack_sip: introduce SIP-URI parsing helper") Signed-off-by: Igor Ryzhov Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin --- net/netfilter/nf_conntrack_sip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index c8d2b6688a2a..046f118dea06 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -471,7 +471,7 @@ static int ct_sip_walk_headers(const struct nf_conn *ct, const char *dptr, return ret; if (ret == 0) break; - dataoff += *matchoff; + dataoff = *matchoff; } *in_header = 0; } @@ -483,7 +483,7 @@ static int ct_sip_walk_headers(const struct nf_conn *ct, const char *dptr, break; if (ret == 0) return ret; - dataoff += *matchoff; + dataoff = *matchoff; } if (in_header) From 468adf7aab7a30ffe4467e2c981a65568ba84f0b Mon Sep 17 00:00:00 2001 From: David Leadbeater Date: Fri, 26 Aug 2022 14:56:57 +1000 Subject: [PATCH 34/56] netfilter: nf_conntrack_irc: Tighten matching on DCC message [ Upstream commit e8d5dfd1d8747b56077d02664a8838c71ced948e ] CTCP messages should only be at the start of an IRC message, not anywhere within it. While the helper only decodes packes in the ORIGINAL direction, its possible to make a client send a CTCP message back by empedding one into a PING request. As-is, thats enough to make the helper believe that it saw a CTCP message. Fixes: 869f37d8e48f ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port") Signed-off-by: David Leadbeater Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin --- net/netfilter/nf_conntrack_irc.c | 34 ++++++++++++++++++++++++++------ 1 file changed, 28 insertions(+), 6 deletions(-) diff --git a/net/netfilter/nf_conntrack_irc.c b/net/netfilter/nf_conntrack_irc.c index b7436935b57d..23ead02c6aa5 100644 --- a/net/netfilter/nf_conntrack_irc.c +++ b/net/netfilter/nf_conntrack_irc.c @@ -150,15 +150,37 @@ static int help(struct sk_buff *skb, unsigned int protoff, data = ib_ptr; data_limit = ib_ptr + skb->len - dataoff; - /* strlen("\1DCC SENT t AAAAAAAA P\1\n")=24 - * 5+MINMATCHLEN+strlen("t AAAAAAAA P\1\n")=14 */ - while (data < data_limit - (19 + MINMATCHLEN)) { - if (memcmp(data, "\1DCC ", 5)) { + /* Skip any whitespace */ + while (data < data_limit - 10) { + if (*data == ' ' || *data == '\r' || *data == '\n') + data++; + else + break; + } + + /* strlen("PRIVMSG x ")=10 */ + if (data < data_limit - 10) { + if (strncasecmp("PRIVMSG ", data, 8)) + goto out; + data += 8; + } + + /* strlen(" :\1DCC SENT t AAAAAAAA P\1\n")=26 + * 7+MINMATCHLEN+strlen("t AAAAAAAA P\1\n")=26 + */ + while (data < data_limit - (21 + MINMATCHLEN)) { + /* Find first " :", the start of message */ + if (memcmp(data, " :", 2)) { data++; continue; } + data += 2; + + /* then check that place only for the DCC command */ + if (memcmp(data, "\1DCC ", 5)) + goto out; data += 5; - /* we have at least (19+MINMATCHLEN)-5 bytes valid data left */ + /* we have at least (21+MINMATCHLEN)-(2+5) bytes valid data left */ iph = ip_hdr(skb); pr_debug("DCC found in master %pI4:%u %pI4:%u\n", @@ -174,7 +196,7 @@ static int help(struct sk_buff *skb, unsigned int protoff, pr_debug("DCC %s detected\n", dccprotos[i]); /* we have at least - * (19+MINMATCHLEN)-5-dccprotos[i].matchlen bytes valid + * (21+MINMATCHLEN)-7-dccprotos[i].matchlen bytes valid * data left (== 14/13 bytes) */ if (parse_dcc(data, data_limit, &dcc_ip, &dcc_port, &addr_beg_p, &addr_end_p)) { From dd5f57c4148d3ee9eec1edc9bcd655c560d98a81 Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Thu, 1 Sep 2022 16:34:40 +0200 Subject: [PATCH 35/56] iavf: Fix cached head and tail value for iavf_get_tx_pending [ Upstream commit 809f23c0423a43266e47a7dc67e95b5cb4d1cbfc ] The underlying hardware may or may not allow reading of the head or tail registers and it really makes no difference if we use the software cached values. So, always used the software cached values. Fixes: 9c6c12595b73 ("i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout") Signed-off-by: Brett Creeley Co-developed-by: Norbert Zulinski Signed-off-by: Norbert Zulinski Signed-off-by: Mateusz Palczewski Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin --- drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index b56d22b530a7..1bf9734ae9cf 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -115,8 +115,11 @@ u32 i40evf_get_tx_pending(struct i40e_ring *ring, bool in_sw) { u32 head, tail; + /* underlying hardware might not allow access and/or always return + * 0 for the head/tail registers so just use the cached values + */ head = ring->next_to_clean; - tail = readl(ring->tail); + tail = ring->next_to_use; if (head != tail) return (head < tail) ? From bffcdade259c05ab3436b5fab711612093c275ef Mon Sep 17 00:00:00 2001 From: Lu Wei Date: Wed, 7 Sep 2022 18:12:04 +0800 Subject: [PATCH 36/56] ipvlan: Fix out-of-bound bugs caused by unset skb->mac_header [ Upstream commit 81225b2ea161af48e093f58e8dfee6d705b16af4 ] If an AF_PACKET socket is used to send packets through ipvlan and the default xmit function of the AF_PACKET socket is changed from dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and remains as the initial value of 65535, this may trigger slab-out-of-bounds bugs as following: ================================================================= UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6 ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 all Trace: print_address_description.constprop.0+0x1d/0x160 print_report.cold+0x4f/0x112 kasan_report+0xa3/0x130 ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] ipvlan_start_xmit+0x29/0xa0 [ipvlan] __dev_direct_xmit+0x2e2/0x380 packet_direct_xmit+0x22/0x60 packet_snd+0x7c9/0xc40 sock_sendmsg+0x9a/0xa0 __sys_sendto+0x18a/0x230 __x64_sys_sendto+0x74/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is: 1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW and skb->protocol is not specified as in packet_parse_headers() 2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit() In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which use "skb->head + skb->mac_header", out-of-bound access occurs. This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2() and reset mac header in multicast to solve this out-of-bound bug. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Lu Wei Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ipvlan/ipvlan_core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c index 40ac60904c8d..63f0226b0a70 100644 --- a/drivers/net/ipvlan/ipvlan_core.c +++ b/drivers/net/ipvlan/ipvlan_core.c @@ -502,7 +502,6 @@ static int ipvlan_process_v6_outbound(struct sk_buff *skb) static int ipvlan_process_outbound(struct sk_buff *skb) { - struct ethhdr *ethh = eth_hdr(skb); int ret = NET_XMIT_DROP; /* The ipvlan is a pseudo-L2 device, so the packets that we receive @@ -512,6 +511,8 @@ static int ipvlan_process_outbound(struct sk_buff *skb) if (skb_mac_header_was_set(skb)) { /* In this mode we dont care about * multicast and broadcast traffic */ + struct ethhdr *ethh = eth_hdr(skb); + if (is_multicast_ether_addr(ethh->h_dest)) { pr_debug_ratelimited( "Dropped {multi|broad}cast of type=[%x]\n", @@ -596,7 +597,7 @@ out: static int ipvlan_xmit_mode_l2(struct sk_buff *skb, struct net_device *dev) { const struct ipvl_dev *ipvlan = netdev_priv(dev); - struct ethhdr *eth = eth_hdr(skb); + struct ethhdr *eth = skb_eth_hdr(skb); struct ipvl_addr *addr; void *lyr3h; int addr_type; @@ -626,6 +627,7 @@ static int ipvlan_xmit_mode_l2(struct sk_buff *skb, struct net_device *dev) return dev_forward_skb(ipvlan->phy_dev, skb); } else if (is_multicast_ether_addr(eth->h_dest)) { + skb_reset_mac_header(skb); ipvlan_skb_crossing_ns(skb, NULL); ipvlan_multicast_enqueue(ipvlan->port, skb, true); return NET_XMIT_SUCCESS; From edda7614d3851c7282f3e3d8dd67421c864682c6 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Wed, 7 Sep 2022 16:56:41 +0900 Subject: [PATCH 37/56] net: team: Unsync device addresses on ndo_stop [ Upstream commit bd60234222b2fd5573526da7bcd422801f271f5f ] Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former team ports after a team device has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls at their expected location, team_close(). v3: * When adding or deleting a port, only sync/unsync addresses if the team device is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Benjamin Poirier Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/team/team.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 8a1e9dba1249..2410f08e2bb5 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1280,10 +1280,12 @@ static int team_port_add(struct team *team, struct net_device *port_dev, } } - netif_addr_lock_bh(dev); - dev_uc_sync_multiple(port_dev, dev); - dev_mc_sync_multiple(port_dev, dev); - netif_addr_unlock_bh(dev); + if (dev->flags & IFF_UP) { + netif_addr_lock_bh(dev); + dev_uc_sync_multiple(port_dev, dev); + dev_mc_sync_multiple(port_dev, dev); + netif_addr_unlock_bh(dev); + } port->index = -1; list_add_tail_rcu(&port->list, &team->port_list); @@ -1354,8 +1356,10 @@ static int team_port_del(struct team *team, struct net_device *port_dev) netdev_rx_handler_unregister(port_dev); team_port_disable_netpoll(port); vlan_vids_del_by_dev(port_dev, dev); - dev_uc_unsync(port_dev, dev); - dev_mc_unsync(port_dev, dev); + if (dev->flags & IFF_UP) { + dev_uc_unsync(port_dev, dev); + dev_mc_unsync(port_dev, dev); + } dev_close(port_dev); team_port_leave(team, port); @@ -1703,6 +1707,14 @@ static int team_open(struct net_device *dev) static int team_close(struct net_device *dev) { + struct team *team = netdev_priv(dev); + struct team_port *port; + + list_for_each_entry(port, &team->port_list, list) { + dev_uc_unsync(port->dev, dev); + dev_mc_unsync(port->dev, dev); + } + return 0; } From 8e9fb25024abb0680c8afe857be83911870e22b9 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 17 Sep 2022 16:25:40 -0700 Subject: [PATCH 38/56] MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko [ Upstream commit 502550123bee6a2ffa438409b5b9aad4d6db3a8c ] The lantiq WDT driver uses clk_get_io(), which is not exported, so export it to fix a build error: ERROR: modpost: "clk_get_io" [drivers/watchdog/lantiq_wdt.ko] undefined! Fixes: 287e3f3f4e68 ("MIPS: lantiq: implement support for clkdev api") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Thomas Bogendoerfer Cc: John Crispin Cc: linux-mips@vger.kernel.org Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin --- arch/mips/lantiq/clk.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c index f5fab99d1751..851f6bf925a6 100644 --- a/arch/mips/lantiq/clk.c +++ b/arch/mips/lantiq/clk.c @@ -52,6 +52,7 @@ struct clk *clk_get_io(void) { return &cpu_clk_generic[2]; } +EXPORT_SYMBOL_GPL(clk_get_io); struct clk *clk_get_ppe(void) { From 21fddea242c3bd5b7d30a85cadf2fe1eb397d154 Mon Sep 17 00:00:00 2001 From: Michal Jaron Date: Tue, 13 Sep 2022 15:38:36 +0200 Subject: [PATCH 39/56] i40e: Fix VF set max MTU size [ Upstream commit 372539def2824c43b6afe2403045b140f65c5acc ] Max MTU sent to VF is set to 0 during memory allocation. It cause that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not depend on data from HW. Set max_mtu field in virtchnl_vf_resource struct to inform VF in GET_VF_RESOURCES msg what size should be max frame. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron Signed-off-by: Mateusz Palczewski Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin --- .../ethernet/intel/i40e/i40e_virtchnl_pf.c | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index a39a8fe073ca..973350b34e08 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -1712,6 +1712,25 @@ static void i40e_del_qch(struct i40e_vf *vf) } } +/** + * i40e_vc_get_max_frame_size + * @vf: pointer to the VF + * + * Max frame size is determined based on the current port's max frame size and + * whether a port VLAN is configured on this VF. The VF is not aware whether + * it's in a port VLAN so the PF needs to account for this in max frame size + * checks and sending the max frame size to the VF. + **/ +static u16 i40e_vc_get_max_frame_size(struct i40e_vf *vf) +{ + u16 max_frame_size = vf->pf->hw.phy.link_info.max_frame_size; + + if (vf->port_vlan_id) + max_frame_size -= VLAN_HLEN; + + return max_frame_size; +} + /** * i40e_vc_get_vf_resources_msg * @vf: pointer to the VF info @@ -1814,6 +1833,7 @@ static int i40e_vc_get_vf_resources_msg(struct i40e_vf *vf, u8 *msg) vfres->max_vectors = pf->hw.func_caps.num_msix_vectors_vf; vfres->rss_key_size = I40E_HKEY_ARRAY_SIZE; vfres->rss_lut_size = I40E_VF_HLUT_ARRAY_SIZE; + vfres->max_mtu = i40e_vc_get_max_frame_size(vf); if (vf->lan_vsi_idx) { vfres->vsi_res[0].vsi_id = vf->lan_vsi_id; From 9cc9895e99d46e85269f0babf84dfec22e002a57 Mon Sep 17 00:00:00 2001 From: Michal Jaron Date: Thu, 1 Sep 2022 09:49:33 +0200 Subject: [PATCH 40/56] i40e: Fix set max_tx_rate when it is lower than 1 Mbps [ Upstream commit 198eb7e1b81d8ba676d0f4f120c092032ae69a8e ] While converting max_tx_rate from bytes to Mbps, this value was set to 0, if the original value was lower than 125000 bytes (1 Mbps). This would cause no transmission rate limiting to occur. This happened due to lack of check of max_tx_rate against the 1 Mbps value for max_tx_rate and the following division by 125000. Fix this issue by adding a helper i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of 50 Mbps, if its value is less than 1 Mbps, otherwise do the required conversion by dividing by 125000. Fixes: 5ecae4120a6b ("i40e: Refactor VF BW rate limiting") Signed-off-by: Michal Jaron Signed-off-by: Andrii Staikov Tested-by: Bharathi Sreenivas Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin --- drivers/net/ethernet/intel/i40e/i40e_main.c | 32 +++++++++++++++++---- 1 file changed, 26 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 85337806efc7..9669d8c8b6c7 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -5487,6 +5487,26 @@ static int i40e_get_link_speed(struct i40e_vsi *vsi) } } +/** + * i40e_bw_bytes_to_mbits - Convert max_tx_rate from bytes to mbits + * @vsi: Pointer to vsi structure + * @max_tx_rate: max TX rate in bytes to be converted into Mbits + * + * Helper function to convert units before send to set BW limit + **/ +static u64 i40e_bw_bytes_to_mbits(struct i40e_vsi *vsi, u64 max_tx_rate) +{ + if (max_tx_rate < I40E_BW_MBPS_DIVISOR) { + dev_warn(&vsi->back->pdev->dev, + "Setting max tx rate to minimum usable value of 50Mbps.\n"); + max_tx_rate = I40E_BW_CREDIT_DIVISOR; + } else { + do_div(max_tx_rate, I40E_BW_MBPS_DIVISOR); + } + + return max_tx_rate; +} + /** * i40e_set_bw_limit - setup BW limit for Tx traffic based on max_tx_rate * @vsi: VSI to be configured @@ -5509,10 +5529,10 @@ int i40e_set_bw_limit(struct i40e_vsi *vsi, u16 seid, u64 max_tx_rate) max_tx_rate, seid); return -EINVAL; } - if (max_tx_rate && max_tx_rate < 50) { + if (max_tx_rate && max_tx_rate < I40E_BW_CREDIT_DIVISOR) { dev_warn(&pf->pdev->dev, "Setting max tx rate to minimum usable value of 50Mbps.\n"); - max_tx_rate = 50; + max_tx_rate = I40E_BW_CREDIT_DIVISOR; } /* Tx rate credits are in values of 50Mbps, 0 is disabled */ @@ -6949,9 +6969,9 @@ config_tc: if (pf->flags & I40E_FLAG_TC_MQPRIO) { if (vsi->mqprio_qopt.max_rate[0]) { - u64 max_tx_rate = vsi->mqprio_qopt.max_rate[0]; + u64 max_tx_rate = i40e_bw_bytes_to_mbits(vsi, + vsi->mqprio_qopt.max_rate[0]); - do_div(max_tx_rate, I40E_BW_MBPS_DIVISOR); ret = i40e_set_bw_limit(vsi, vsi->seid, max_tx_rate); if (!ret) { u64 credits = max_tx_rate; @@ -9613,10 +9633,10 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired) } if (vsi->mqprio_qopt.max_rate[0]) { - u64 max_tx_rate = vsi->mqprio_qopt.max_rate[0]; + u64 max_tx_rate = i40e_bw_bytes_to_mbits(vsi, + vsi->mqprio_qopt.max_rate[0]); u64 credits = 0; - do_div(max_tx_rate, I40E_BW_MBPS_DIVISOR); ret = i40e_set_bw_limit(vsi, vsi->seid, max_tx_rate); if (ret) goto end_unlock; From a5d862f3333bbbde4656458189e05541c334d762 Mon Sep 17 00:00:00 2001 From: Liang He Date: Tue, 13 Sep 2022 20:56:59 +0800 Subject: [PATCH 41/56] of: mdio: Add of_node_put() when breaking out of for_each_xx [ Upstream commit 1c48709e6d9d353acaaac1d8e33474756b121d78 ] In of_mdiobus_register(), we should call of_node_put() for 'child' escaped out of for_each_available_child_of_node(). Fixes: 66bdede495c7 ("of_mdio: Fix broken PHY IRQ in case of probe deferral") Co-developed-by: Miaoqian Lin Signed-off-by: Miaoqian Lin Signed-off-by: Liang He Link: https://lore.kernel.org/r/20220913125659.3331969-1-windhl@126.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/of/of_mdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 100adacfdca9..9031c57aa1b5 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -283,6 +283,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) return 0; unregister: + of_node_put(child); mdiobus_unregister(mdio); return rc; } From 1e98318af2f163eadaff815abcef38d27ca92c1e Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 20 Sep 2022 14:20:17 +0200 Subject: [PATCH 42/56] netfilter: ebtables: fix memory leak when blob is malformed [ Upstream commit 62ce44c4fff947eebdf10bb582267e686e6835c9 ] The bug fix was incomplete, it "replaced" crash with a memory leak. The old code had an assignment to "ret" embedded into the conditional, restore this. Fixes: 7997eff82828 ("netfilter: ebtables: reject blobs that don't provide all entry points") Reported-and-tested-by: syzbot+a24c5252f3e3ab733464@syzkaller.appspotmail.com Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin --- net/bridge/netfilter/ebtables.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index ea27bacbd005..59d8974ee92b 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -1003,8 +1003,10 @@ static int do_replace_finish(struct net *net, struct ebt_replace *repl, goto free_iterate; } - if (repl->valid_hooks != t->valid_hooks) + if (repl->valid_hooks != t->valid_hooks) { + ret = -EINVAL; goto free_unlock; + } if (repl->num_counters && repl->num_counters != t->private->nentries) { ret = -EINVAL; From 71d9e0874c6bd577ac29fbd515515f54048932f7 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Tue, 20 Sep 2022 11:40:56 +0200 Subject: [PATCH 43/56] can: gs_usb: gs_can_open(): fix race dev->can.state condition [ Upstream commit 5440428b3da65408dba0241985acb7a05258b85e ] The dev->can.state is set to CAN_STATE_ERROR_ACTIVE, after the device has been started. On busy networks the CAN controller might receive CAN frame between and go into an error state before the dev->can.state is assigned. Assign dev->can.state before starting the controller to close the race window. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220920195216.232481-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin --- drivers/net/can/usb/gs_usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index 2101b2fab7df..62ca4964a863 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -686,6 +686,7 @@ static int gs_can_open(struct net_device *netdev) flags |= GS_CAN_MODE_TRIPLE_SAMPLE; /* finally start device */ + dev->can.state = CAN_STATE_ERROR_ACTIVE; dm->mode = cpu_to_le32(GS_CAN_MODE_START); dm->flags = cpu_to_le32(flags); rc = usb_control_msg(interface_to_usbdev(dev->iface), @@ -702,13 +703,12 @@ static int gs_can_open(struct net_device *netdev) if (rc < 0) { netdev_err(netdev, "Couldn't start device (err=%d)\n", rc); kfree(dm); + dev->can.state = CAN_STATE_STOPPED; return rc; } kfree(dm); - dev->can.state = CAN_STATE_ERROR_ACTIVE; - parent->active_channels++; if (!(dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)) netif_start_queue(netdev); From 84ddf7b4213815e0f34422459d6c8f310b0a628f Mon Sep 17 00:00:00 2001 From: Lieven Hey Date: Thu, 15 Sep 2022 11:29:10 +0200 Subject: [PATCH 44/56] perf jit: Include program header in ELF files [ Upstream commit babd04386b1df8c364cdaa39ac0e54349502e1e5 ] The missing header makes it hard for programs like elfutils to open these files. Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols") Reviewed-by: Leo Yan Signed-off-by: Lieven Hey Tested-by: Leo Yan Cc: Leo Yan Link: https://lore.kernel.org/r/20220915092910.711036-1-lieven.hey@kdab.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin --- tools/perf/util/genelf.c | 14 ++++++++++++++ tools/perf/util/genelf.h | 4 ++++ 2 files changed, 18 insertions(+) diff --git a/tools/perf/util/genelf.c b/tools/perf/util/genelf.c index afb8fe3a8e35..65e41e259af8 100644 --- a/tools/perf/util/genelf.c +++ b/tools/perf/util/genelf.c @@ -256,6 +256,7 @@ jit_write_elf(int fd, uint64_t load_addr, const char *sym, Elf_Data *d; Elf_Scn *scn; Elf_Ehdr *ehdr; + Elf_Phdr *phdr; Elf_Shdr *shdr; uint64_t eh_frame_base_offset; char *strsym = NULL; @@ -290,6 +291,19 @@ jit_write_elf(int fd, uint64_t load_addr, const char *sym, ehdr->e_version = EV_CURRENT; ehdr->e_shstrndx= unwinding ? 4 : 2; /* shdr index for section name */ + /* + * setup program header + */ + phdr = elf_newphdr(e, 1); + phdr[0].p_type = PT_LOAD; + phdr[0].p_offset = 0; + phdr[0].p_vaddr = 0; + phdr[0].p_paddr = 0; + phdr[0].p_filesz = csize; + phdr[0].p_memsz = csize; + phdr[0].p_flags = PF_X | PF_R; + phdr[0].p_align = 8; + /* * setup text section */ diff --git a/tools/perf/util/genelf.h b/tools/perf/util/genelf.h index de322d51c7fe..23a7401a63d0 100644 --- a/tools/perf/util/genelf.h +++ b/tools/perf/util/genelf.h @@ -41,8 +41,10 @@ int jit_add_debug_info(Elf *e, uint64_t code_addr, void *debug, int nr_debug_ent #if GEN_ELF_CLASS == ELFCLASS64 #define elf_newehdr elf64_newehdr +#define elf_newphdr elf64_newphdr #define elf_getshdr elf64_getshdr #define Elf_Ehdr Elf64_Ehdr +#define Elf_Phdr Elf64_Phdr #define Elf_Shdr Elf64_Shdr #define Elf_Sym Elf64_Sym #define ELF_ST_TYPE(a) ELF64_ST_TYPE(a) @@ -50,8 +52,10 @@ int jit_add_debug_info(Elf *e, uint64_t code_addr, void *debug, int nr_debug_ent #define ELF_ST_VIS(a) ELF64_ST_VISIBILITY(a) #else #define elf_newehdr elf32_newehdr +#define elf_newphdr elf32_newphdr #define elf_getshdr elf32_getshdr #define Elf_Ehdr Elf32_Ehdr +#define Elf_Phdr Elf32_Phdr #define Elf_Shdr Elf32_Shdr #define Elf_Sym Elf32_Sym #define ELF_ST_TYPE(a) ELF32_ST_TYPE(a) From b130f83e93ad65e9c309901bb67f5b938a7d79f2 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 14 Sep 2022 15:24:29 +0300 Subject: [PATCH 45/56] perf kcore_copy: Do not check /proc/modules is unchanged [ Upstream commit 5b427df27b94aec1312cace48a746782a0925c53 ] /proc/kallsyms and /proc/modules are compared before and after the copy in order to ensure no changes during the copy. However /proc/modules also might change due to reference counts changing even though that does not make any difference. Any modules loaded or unloaded should be visible in changes to kallsyms, so it is not necessary to check /proc/modules also anyway. Remove the comparison checking that /proc/modules is unchanged. Fixes: fc1b691d7651d949 ("perf buildid-cache: Add ability to add kcore to the cache") Reported-by: Daniel Dao Signed-off-by: Adrian Hunter Tested-by: Daniel Dao Acked-by: Namhyung Kim Cc: Ian Rogers Cc: Jiri Olsa Link: https://lore.kernel.org/r/20220914122429.8770-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin --- tools/perf/util/symbol-elf.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c index bd33d6613929..5fba57c10edd 100644 --- a/tools/perf/util/symbol-elf.c +++ b/tools/perf/util/symbol-elf.c @@ -1871,8 +1871,8 @@ static int kcore_copy__compare_file(const char *from_dir, const char *to_dir, * unusual. One significant peculiarity is that the mapping (start -> pgoff) * is not the same for the kernel map and the modules map. That happens because * the data is copied adjacently whereas the original kcore has gaps. Finally, - * kallsyms and modules files are compared with their copies to check that - * modules have not been loaded or unloaded while the copies were taking place. + * kallsyms file is compared with its copy to check that modules have not been + * loaded or unloaded while the copies were taking place. * * Return: %0 on success, %-1 on failure. */ @@ -1935,9 +1935,6 @@ int kcore_copy(const char *from_dir, const char *to_dir) goto out_extract_close; } - if (kcore_copy__compare_file(from_dir, to_dir, "modules")) - goto out_extract_close; - if (kcore_copy__compare_file(from_dir, to_dir, "kallsyms")) goto out_extract_close; From 1c9b1d021181b0bf7f4cf2caa04f7fe358fdac49 Mon Sep 17 00:00:00 2001 From: Sean Anderson Date: Tue, 20 Sep 2022 19:50:18 -0400 Subject: [PATCH 46/56] net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD [ Upstream commit 878e2405710aacfeeb19364c300f38b7a9abfe8f ] There is a separate receive path for small packets (under 256 bytes). Instead of allocating a new dma-capable skb to be used for the next packet, this path allocates a skb and copies the data into it (reusing the existing sbk for the next packet). There are two bytes of junk data at the beginning of every packet. I believe these are inserted in order to allow aligned DMA and IP headers. We skip over them using skb_reserve. Before copying over the data, we must use a barrier to ensure we see the whole packet. The current code only synchronizes len bytes, starting from the beginning of the packet, including the junk bytes. However, this leaves off the final two bytes in the packet. Synchronize the whole packet. To reproduce this problem, ping a HME with a payload size between 17 and 214 $ ping -s 17 which will complain rather loudly about the data mismatch. Small packets (below 60 bytes on the wire) do not have this issue. I suspect this is related to the padding added to increase the minimum packet size. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Sean Anderson Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220920235018.1675956-1-seanga2@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/ethernet/sun/sunhme.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c index 882908e74cc9..a4090163d870 100644 --- a/drivers/net/ethernet/sun/sunhme.c +++ b/drivers/net/ethernet/sun/sunhme.c @@ -2064,9 +2064,9 @@ static void happy_meal_rx(struct happy_meal *hp, struct net_device *dev) skb_reserve(copy_skb, 2); skb_put(copy_skb, len); - dma_sync_single_for_cpu(hp->dma_dev, dma_addr, len, DMA_FROM_DEVICE); + dma_sync_single_for_cpu(hp->dma_dev, dma_addr, len + 2, DMA_FROM_DEVICE); skb_copy_from_linear_data(skb, copy_skb->data, len); - dma_sync_single_for_device(hp->dma_dev, dma_addr, len, DMA_FROM_DEVICE); + dma_sync_single_for_device(hp->dma_dev, dma_addr, len + 2, DMA_FROM_DEVICE); /* Reuse original ring buffer. */ hme_write_rxd(hp, this, (RXFLAG_OWN|((RX_BUF_ALLOC_SIZE-RX_OFFSET)<<16)), From 3b5fa3abe0105c022e47071394a3c4476d8035a7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Thu, 1 Sep 2022 17:39:32 +0300 Subject: [PATCH 47/56] serial: Create uart_xmit_advance() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit e77cab77f2cb3a1ca2ba8df4af45bb35617ac16d upstream. A very common pattern in the drivers is to advance xmit tail index and do bookkeeping of Tx'ed characters. Create uart_xmit_advance() to handle it. Reviewed-by: Andy Shevchenko Cc: stable Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220901143934.8850-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 3460b15a2607..af8143fb644c 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -306,6 +306,23 @@ struct uart_state { /* number of characters left in xmit buffer before we ask for more */ #define WAKEUP_CHARS 256 +/** + * uart_xmit_advance - Advance xmit buffer and account Tx'ed chars + * @up: uart_port structure describing the port + * @chars: number of characters sent + * + * This function advances the tail of circular xmit buffer by the number of + * @chars transmitted and handles accounting of transmitted bytes (into + * @up's icount.tx). + */ +static inline void uart_xmit_advance(struct uart_port *up, unsigned int chars) +{ + struct circ_buf *xmit = &up->state->xmit; + + xmit->tail = (xmit->tail + chars) & (UART_XMIT_SIZE - 1); + up->icount.tx += chars; +} + struct module; struct tty_driver; From 61026eed5b73bf9896271fa65b123e3569a680e5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Thu, 1 Sep 2022 17:39:33 +0300 Subject: [PATCH 48/56] serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 754f68044c7dd6c52534ba3e0f664830285c4b15 upstream. DMA complete & stop paths did not correctly account Tx'ed characters into icount.tx. Using uart_xmit_advance() fixes the problem. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Cc: # serial: Create uart_xmit_advance() Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220901143934.8850-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial-tegra.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index af2a29cfbbe9..ee480a1480e8 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -398,7 +398,7 @@ static void tegra_uart_tx_dma_complete(void *args) count = tup->tx_bytes_requested - state.residue; async_tx_ack(tup->tx_dma_desc); spin_lock_irqsave(&tup->uport.lock, flags); - xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + uart_xmit_advance(&tup->uport, count); tup->tx_in_progress = 0; if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&tup->uport); @@ -482,7 +482,6 @@ static unsigned int tegra_uart_tx_empty(struct uart_port *u) static void tegra_uart_stop_tx(struct uart_port *u) { struct tegra_uart_port *tup = to_tegra_uport(u); - struct circ_buf *xmit = &tup->uport.state->xmit; struct dma_tx_state state; unsigned int count; @@ -493,7 +492,7 @@ static void tegra_uart_stop_tx(struct uart_port *u) dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state); count = tup->tx_bytes_requested - state.residue; async_tx_ack(tup->tx_dma_desc); - xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + uart_xmit_advance(&tup->uport, count); tup->tx_in_progress = 0; } From aaba5ff2742043705bc4c02fd0b2b246e2e16da1 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Mon, 19 Sep 2022 17:49:31 +0200 Subject: [PATCH 49/56] s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup commit db7ba07108a48c0f95b74fabbfd5d63e924f992d upstream. Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup pointer being NULL. The pavgroup pointer is checked on the entrance of the function but without the lcu->lock being held. Therefore there is a race window between dasd_alias_get_start_dev() and _lcu_update() which sets pavgroup to NULL with the lcu->lock held. Fix by checking the pavgroup pointer with lcu->lock held. Cc: # 2.6.25+ Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Link: https://lore.kernel.org/r/20220919154931.4123002-2-sth@linux.ibm.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman --- drivers/s390/block/dasd_alias.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index dc78a523a69f..b6b938aa6615 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -675,12 +675,12 @@ int dasd_alias_remove_device(struct dasd_device *device) struct dasd_device *dasd_alias_get_start_dev(struct dasd_device *base_device) { struct dasd_eckd_private *alias_priv, *private = base_device->private; - struct alias_pav_group *group = private->pavgroup; struct alias_lcu *lcu = private->lcu; struct dasd_device *alias_device; + struct alias_pav_group *group; unsigned long flags; - if (!group || !lcu) + if (!lcu) return NULL; if (lcu->pav == NO_PAV || lcu->flags & (NEED_UAC_UPDATE | UPDATE_PENDING)) @@ -697,6 +697,11 @@ struct dasd_device *dasd_alias_get_start_dev(struct dasd_device *base_device) } spin_lock_irqsave(&lcu->lock, flags); + group = private->pavgroup; + if (!group) { + spin_unlock_irqrestore(&lcu->lock, flags); + return NULL; + } alias_device = group->next; if (!alias_device) { if (list_empty(&group->aliaslist)) { From c3f8c7e9865d1ef1ae71cd7bb5f9b57dc7970f71 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Sat, 27 Aug 2022 15:03:45 +0200 Subject: [PATCH 50/56] Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region [ Upstream commit f0880e2cb7e1f8039a048fdd01ce45ab77247221 ] Passed through PCI device sometimes misbehave on Gen1 VMs when Hyper-V DRM driver is also loaded. Looking at IOMEM assignment, we can see e.g. $ cat /proc/iomem ... f8000000-fffbffff : PCI Bus 0000:00 f8000000-fbffffff : 0000:00:08.0 f8000000-f8001fff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe ... fe0000000-fffffffff : PCI Bus 0000:00 fe0000000-fe07fffff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe fe0000000-fe07fffff : 2ba2:00:02.0 fe0000000-fe07fffff : mlx4_core the interesting part is the 'f8000000' region as it is actually the VM's framebuffer: $ lspci -v ... 0000:00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller]) Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f8000000 (32-bit, non-prefetchable) [size=64M] ... hv_vmbus: registering driver hyperv_drm hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Synthvid Version major 3, minor 5 hyperv_drm 0000:00:08.0: vgaarb: deactivate vga console hyperv_drm 0000:00:08.0: BAR 0: can't reserve [mem 0xf8000000-0xfbffffff] hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Cannot request framebuffer, boot fb still active? Note: "Cannot request framebuffer" is not a fatal error in hyperv_setup_gen1() as the code assumes there's some other framebuffer device there but we actually have some other PCI device (mlx4 in this case) config space there! The problem appears to be that vmbus_allocate_mmio() can use dedicated framebuffer region to serve any MMIO request from any device. The semantics one might assume of a parameter named "fb_overlap_ok" aren't implemented because !fb_overlap_ok essentially has no effect. The existing semantics are really "prefer_fb_overlap". This patch implements the expected and needed semantics, which is to not allocate from the frame buffer space when !fb_overlap_ok. Note, Gen2 VMs are usually unaffected by the issue because framebuffer region is already taken by EFI fb (in case kernel supports it) but Gen1 VMs may have this region unclaimed by the time Hyper-V PCI pass-through driver tries allocating MMIO space if Hyper-V DRM/FB drivers load after it. Devices can be brought up in any sequence so let's resolve the issue by always ignoring 'fb_mmio' region for non-FB requests, even if the region is unclaimed. Reviewed-by: Michael Kelley Signed-off-by: Vitaly Kuznetsov Link: https://lore.kernel.org/r/20220827130345.1320254-4-vkuznets@redhat.com Signed-off-by: Wei Liu Signed-off-by: Sasha Levin --- drivers/hv/vmbus_drv.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index fca092cfe200..9cbe0b00ebf7 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -1846,7 +1846,7 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, bool fb_overlap_ok) { struct resource *iter, *shadow; - resource_size_t range_min, range_max, start; + resource_size_t range_min, range_max, start, end; const char *dev_n = dev_name(&device_obj->device); int retval; @@ -1881,6 +1881,14 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, range_max = iter->end; start = (range_min + align - 1) & ~(align - 1); for (; start + size - 1 <= range_max; start += align) { + end = start + size - 1; + + /* Skip the whole fb_mmio region if not fb_overlap_ok */ + if (!fb_overlap_ok && fb_mmio && + (((start >= fb_mmio->start) && (start <= fb_mmio->end)) || + ((end >= fb_mmio->start) && (end <= fb_mmio->end)))) + continue; + shadow = __request_region(iter, start, size, NULL, IORESOURCE_BUSY); if (!shadow) From 0b553f85c46054d75535a2f87a7a6582db732398 Mon Sep 17 00:00:00 2001 From: Yao Wang1 Date: Mon, 22 Aug 2022 18:30:31 +0800 Subject: [PATCH 51/56] drm/amd/display: Limit user regamma to a valid value [ Upstream commit 3601d620f22e37740cf73f8278eabf9f2aa19eb7 ] [Why] For HDR mode, we get total 512 tf_point and after switching to SDR mode we actually get 400 tf_point and the rest of points(401~512) still use dirty value from HDR mode. We should limit the rest of the points to max value. [How] Limit the value when coordinates_x.x > 1, just like what we do in translate_from_linear_space for other re-gamma build paths. Tested-by: Daniel Wheeler Reviewed-by: Krunoslav Kovac Reviewed-by: Aric Cyr Acked-by: Pavle Kotarac Signed-off-by: Yao Wang1 Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/amd/display/modules/color/color_gamma.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/amd/display/modules/color/color_gamma.c b/drivers/gpu/drm/amd/display/modules/color/color_gamma.c index 11ea1a0e629b..4e866317ec25 100644 --- a/drivers/gpu/drm/amd/display/modules/color/color_gamma.c +++ b/drivers/gpu/drm/amd/display/modules/color/color_gamma.c @@ -1206,6 +1206,7 @@ static void interpolate_user_regamma(uint32_t hw_points_num, struct fixed31_32 lut2; struct fixed31_32 delta_lut; struct fixed31_32 delta_index; + const struct fixed31_32 one = dc_fixpt_from_int(1); i = 0; /* fixed_pt library has problems handling too small values */ @@ -1234,6 +1235,9 @@ static void interpolate_user_regamma(uint32_t hw_points_num, } else hw_x = coordinates_x[i].x; + if (dc_fixpt_le(one, hw_x)) + hw_x = one; + norm_x = dc_fixpt_mul(norm_factor, hw_x); index = dc_fixpt_floor(norm_x); if (index < 0 || index > 255) From ab7e255fb882eb778ce7e6578783907fe9bc8708 Mon Sep 17 00:00:00 2001 From: Nathan Huckleberry Date: Tue, 13 Sep 2022 13:55:55 -0700 Subject: [PATCH 52/56] drm/rockchip: Fix return type of cdn_dp_connector_mode_valid [ Upstream commit b0b9408f132623dc88e78adb5282f74e4b64bb57 ] The mode_valid field in drm_connector_helper_funcs is expected to be of type: enum drm_mode_status (* mode_valid) (struct drm_connector *connector, struct drm_display_mode *mode); The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of cdn_dp_connector_mode_valid should be changed from int to enum drm_mode_status. Reported-by: Dan Carpenter Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by: Nathan Huckleberry Reviewed-by: Nathan Chancellor Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20220913205555.155149-1-nhuck@google.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/rockchip/cdn-dp-core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c index 3feab563e50a..3f992e5a75c9 100644 --- a/drivers/gpu/drm/rockchip/cdn-dp-core.c +++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c @@ -284,8 +284,9 @@ static int cdn_dp_connector_get_modes(struct drm_connector *connector) return ret; } -static int cdn_dp_connector_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) +static enum drm_mode_status +cdn_dp_connector_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) { struct cdn_dp_device *dp = connector_to_dp(connector); struct drm_display_info *display_info = &dp->connector.display_info; From 2191f350efa44b9d3fb197050016d13ea409c493 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Fri, 29 Jul 2022 13:30:23 +0900 Subject: [PATCH 53/56] workqueue: don't skip lockdep work dependency in cancel_work_sync() [ Upstream commit c0feea594e058223973db94c1c32a830c9807c86 ] Like Hillf Danton mentioned syzbot should have been able to catch cancel_work_sync() in work context by checking lockdep_map in __flush_work() for both flush and cancel. in [1], being unable to report an obvious deadlock scenario shown below is broken. From locking dependency perspective, sync version of cancel request should behave as if flush request, for it waits for completion of work if that work has already started execution. ---------- #include #include static DEFINE_MUTEX(mutex); static void work_fn(struct work_struct *work) { schedule_timeout_uninterruptible(HZ / 5); mutex_lock(&mutex); mutex_unlock(&mutex); } static DECLARE_WORK(work, work_fn); static int __init test_init(void) { schedule_work(&work); schedule_timeout_uninterruptible(HZ / 10); mutex_lock(&mutex); cancel_work_sync(&work); mutex_unlock(&mutex); return -EINVAL; } module_init(test_init); MODULE_LICENSE("GPL"); ---------- The check this patch restores was added by commit 0976dfc1d0cd80a4 ("workqueue: Catch more locking problems with flush_work()"). Then, lockdep's crossrelease feature was added by commit b09be676e0ff25bd ("locking/lockdep: Implement the 'crossrelease' feature"). As a result, this check was once removed by commit fd1a5b04dfb899f8 ("workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes"). But lockdep's crossrelease feature was removed by commit e966eaeeb623f099 ("locking/lockdep: Remove the cross-release locking checks"). At this point, this check should have been restored. Then, commit d6e89786bed977f3 ("workqueue: skip lockdep wq dependency in cancel_work_sync()") introduced a boolean flag in order to distinguish flush_work() and cancel_work_sync(), for checking "struct workqueue_struct" dependency when called from cancel_work_sync() was causing false positives. Then, commit 87915adc3f0acdf0 ("workqueue: re-add lockdep dependencies for flushing") tried to restore "struct work_struct" dependency check, but by error checked this boolean flag. Like an example shown above indicates, "struct work_struct" dependency needs to be checked for both flush_work() and cancel_work_sync(). Link: https://lkml.kernel.org/r/20220504044800.4966-1-hdanton@sina.com [1] Reported-by: Hillf Danton Suggested-by: Lai Jiangshan Fixes: 87915adc3f0acdf0 ("workqueue: re-add lockdep dependencies for flushing") Cc: Johannes Berg Signed-off-by: Tetsuo Handa Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin --- kernel/workqueue.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index b1bb6cb5802e..4ea2f7fd20ce 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -2917,10 +2917,8 @@ static bool __flush_work(struct work_struct *work, bool from_cancel) if (WARN_ON(!work->func)) return false; - if (!from_cancel) { - lock_map_acquire(&work->lockdep_map); - lock_map_release(&work->lockdep_map); - } + lock_map_acquire(&work->lockdep_map); + lock_map_release(&work->lockdep_map); if (start_flush_work(work, &barr, from_cancel)) { wait_for_completion(&barr.done); From ac2604aeeabdf20769265cd5e49439ce11c4321c Mon Sep 17 00:00:00 2001 From: Raymond Tan Date: Fri, 21 Aug 2020 16:11:01 +0300 Subject: [PATCH 54/56] usb: dwc3: pci: Allow Elkhart Lake to utilize DSM method for PM functionality commit a609ce2a13360d639b384b6ca783b38c1247f2db upstream. Similar to some other IA platforms, Elkhart Lake too depends on the PMU register write to request transition of Dx power state. Thus, we add the PCI_DEVICE_ID_INTEL_EHLLP to the list of devices that shall execute the ACPI _DSM method during D0/D3 sequence. [heikki.krogerus@linux.intel.com: included Fixes tag] Fixes: dbb0569de852 ("usb: dwc3: pci: Add Support for Intel Elkhart Lake Devices") Cc: stable@vger.kernel.org Signed-off-by: Raymond Tan Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index ec7063e63436..955bf820f410 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -149,7 +149,8 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) if (pdev->vendor == PCI_VENDOR_ID_INTEL) { if (pdev->device == PCI_DEVICE_ID_INTEL_BXT || - pdev->device == PCI_DEVICE_ID_INTEL_BXT_M) { + pdev->device == PCI_DEVICE_ID_INTEL_BXT_M || + pdev->device == PCI_DEVICE_ID_INTEL_EHLLP) { guid_parse(PCI_INTEL_BXT_DSM_GUID, &dwc->guid); dwc->has_dsm_for_pm = true; } From 66b955d30f8cf4949a590bf6ce7b264b5ab64dea Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 8 Sep 2022 11:21:26 +0200 Subject: [PATCH 55/56] ext4: make directory inode spreading reflect flexbg size commit 613c5a85898d1cd44e68f28d65eccf64a8ace9cf upstream. Currently the Orlov inode allocator searches for free inodes for a directory only in flex block groups with at most inodes_per_group/16 more directory inodes than average per flex block group. However with growing size of flex block group this becomes unnecessarily strict. Scale allowed difference from average directory count per flex block group with flex block group size as we do with other metrics. Tested-by: Stefan Wahren Tested-by: Ojaswin Mujoo Cc: stable@kernel.org Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/ Signed-off-by: Jan Kara Link: https://lore.kernel.org/r/20220908092136.11770-3-jack@suse.cz Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman --- fs/ext4/ialloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index 5cb19fdf6450..5dfb34802aed 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -505,7 +505,7 @@ static int find_group_orlov(struct super_block *sb, struct inode *parent, goto fallback; } - max_dirs = ndirs / ngroups + inodes_per_group / 16; + max_dirs = ndirs / ngroups + inodes_per_group*flex_size / 16; min_inodes = avefreei - inodes_per_group*flex_size / 4; if (min_inodes < 1) min_inodes = 1; From 16d5f34aff8c24e1c6a72599bf6b9cf1fb5a51cd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Sep 2022 11:02:58 +0200 Subject: [PATCH 56/56] Linux 4.19.260 Link: https://lore.kernel.org/r/20220926100741.430882406@linuxfoundation.org Tested-by: Pavel Machek (CIP) Tested-by: Shuah Khan Link: https://lore.kernel.org/r/20220926163538.084331103@linuxfoundation.org Tested-by: Linux Kernel Functional Testing Tested-by: Sudip Mukherjee Tested-by: Pavel Machek (CIP) Tested-by: Guenter Roeck Tested-by: Jon Hunter Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 133683dfc7b8..61971754a74e 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 4 PATCHLEVEL = 19 -SUBLEVEL = 259 +SUBLEVEL = 260 EXTRAVERSION = NAME = "People's Front"