Staging: et131x: attack the config stuff

Prune this back as most of it isn't relevant or used

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Alan Cox 2009-08-27 11:00:06 +01:00 committed by Greg Kroah-Hartman
parent c2557177f1
commit 9483146369
3 changed files with 23 additions and 96 deletions

View File

@ -256,8 +256,6 @@ struct et131x_adapter {
u8 RegistryPhyComa; /* Phy Coma mode enable/disable */
u32 RegistryRxMemEnd; /* Size of internal rx memory */
u8 RegistryMACStat; /* If set, read MACSTAT, else don't */
u32 RegistryVlanTag; /* 802.1q Vlan TAG */
u32 RegistryJumboPacket; /* Max supported ethernet packet size */
/* Validation helpers */

View File

@ -105,22 +105,10 @@ extern dbg_info_t *et131x_dbginfo;
#define PARM_SPEED_DUPLEX_MIN 0
#define PARM_SPEED_DUPLEX_MAX 5
#define PARM_VLAN_TAG_DEF 0
#define PARM_VLAN_TAG_MIN 0
#define PARM_VLAN_TAG_MAX 4095
#define PARM_FLOW_CTL_DEF 0
#define PARM_FLOW_CTL_MIN 0
#define PARM_FLOW_CTL_MAX 3
#define PARM_WOL_LINK_DEF 3
#define PARM_WOL_LINK_MIN 0
#define PARM_WOL_LINK_MAX 3
#define PARM_WOL_MATCH_DEF 7
#define PARM_WOL_MATCH_MIN 0
#define PARM_WOL_MATCH_MAX 7
#define PARM_JUMBO_PKT_DEF 1514
#define PARM_JUMBO_PKT_MIN 1514
#define PARM_JUMBO_PKT_MAX 9216
@ -129,10 +117,6 @@ extern dbg_info_t *et131x_dbginfo;
#define PARM_PHY_COMA_MIN 0
#define PARM_PHY_COMA_MAX 1
#define PARM_MAC_STAT_DEF 1
#define PARM_MAC_STAT_MIN 0
#define PARM_MAC_STAT_MAX 1
#define PARM_SC_GAIN_DEF 7
#define PARM_SC_GAIN_MIN 0
#define PARM_SC_GAIN_MAX 7
@ -145,13 +129,7 @@ extern dbg_info_t *et131x_dbginfo;
#define PARM_NMI_DISABLE_MIN 0
#define PARM_NMI_DISABLE_MAX 2
#define PARM_DMA_CACHE_DEF 0
#define PARM_PHY_LOOPBK_DEF 0
#define PARM_PHY_LOOPBK_MIN 0
#define PARM_PHY_LOOPBK_MAX 1
#define PARM_MAC_ADDRESS_DEF { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 }
/* Module parameter for disabling NMI
* et131x_speed_set :
@ -184,109 +162,61 @@ MODULE_PARM_DESC(et131x_speed_set,
* @etdev: pointer to the private adapter struct
*
* Parses a configuration from some location (module parameters, for example)
* into the private adapter struct
* into the private adapter struct. This really has no sensible analogy in
* Linux as sysfs parameters are dynamic. Several things that were hee could
* go into sysfs, but other stuff like speed handling is part of the mii
* interfaces/ethtool.
*/
void et131x_config_parse(struct et131x_adapter *etdev)
{
uint8_t macAddrDef[] = PARM_MAC_ADDRESS_DEF;
static const u8 default_mac[] = { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 };
static const u8 duplex[] = { 0, 1, 2, 1, 2, 2 };
static const u16 speed[] = { 0, 10, 10, 100, 100, 1000 };
DBG_ENTER(et131x_dbginfo);
/*
* The NDIS driver uses the registry to store persistent per-device
* configuration, and reads this configuration into the appropriate
* elements of the private adapter structure on initialization.
* Because Linux has no analog to the registry, use this function to
* initialize the private adapter structure with a default
* configuration.
*
* One other possibility is to use a series of module parameters which
* can be passed in by the caller when the module is initialized.
* However, this implementation does not allow for seperate
* configurations in the event multiple devices are present, and hence
* will not suffice.
*
* If another method is derived which addresses this problem, this is
* where it should be implemented.
*/
etdev->SpeedDuplex = et131x_speed_set;
/* Set the private adapter struct with default values for the
* corresponding parameters
*/
if (et131x_speed_set != PARM_SPEED_DUPLEX_DEF) {
if (et131x_speed_set < PARM_SPEED_DUPLEX_MIN ||
et131x_speed_set > PARM_SPEED_DUPLEX_MAX) {
dev_warn(&etdev->pdev->dev, "invalid speed setting ignored.\n");
et131x_speed_set = PARM_SPEED_DUPLEX_DEF;
}
else if (et131x_speed_set != PARM_SPEED_DUPLEX_DEF)
DBG_VERBOSE(et131x_dbginfo, "Speed set manually to : %d \n",
et131x_speed_set);
etdev->SpeedDuplex = et131x_speed_set;
} else {
etdev->SpeedDuplex = PARM_SPEED_DUPLEX_DEF;
}
/* etdev->SpeedDuplex = PARM_SPEED_DUPLEX_DEF; */
etdev->RegistryVlanTag = PARM_VLAN_TAG_DEF;
etdev->RegistryFlowControl = PARM_FLOW_CTL_DEF;
etdev->RegistryJumboPacket = PARM_JUMBO_PKT_DEF;
etdev->RegistryPhyComa = PARM_PHY_COMA_DEF;
etdev->RegistryMACStat = PARM_MAC_STAT_DEF;
if (et131x_nmi_disable != PARM_NMI_DISABLE_DEF)
etdev->RegistryNMIDisable = et131x_nmi_disable;
else
etdev->RegistryNMIDisable = PARM_NMI_DISABLE_DEF;
etdev->RegistryPhyLoopbk = PARM_PHY_LOOPBK_DEF;
etdev->RegistryPhyLoopbk = 0; /* 0 off 1 on */
/* Set the MAC address to a default */
memcpy(etdev->CurrentAddress, macAddrDef, ETH_ALEN);
memcpy(etdev->CurrentAddress, default_mac, ETH_ALEN);
etdev->bOverrideAddress = false;
DBG_TRACE(et131x_dbginfo,
"Default MAC Address : %02x:%02x:%02x:%02x:%02x:%02x\n",
etdev->CurrentAddress[0], etdev->CurrentAddress[1],
etdev->CurrentAddress[2], etdev->CurrentAddress[3],
etdev->CurrentAddress[4], etdev->CurrentAddress[5]);
/* Decode SpeedDuplex
*
* Set up as if we are auto negotiating always and then change if we
* go into force mode
*/
etdev->AiForceSpeed = 0; /* Auto speed */
etdev->AiForceDpx = 0; /* Auto FDX */
/* If we are the 10/100 device, and gigabit is somehow requested then
*
* If we are the 10/100 device, and gigabit is somehow requested then
* knock it down to 100 full.
*/
if (etdev->pdev->device == ET131X_PCI_DEVICE_ID_FAST &&
etdev->SpeedDuplex == 5)
etdev->SpeedDuplex = 4;
switch (etdev->SpeedDuplex) {
case 1: /* 10Mb Half-Duplex */
etdev->AiForceSpeed = 10;
etdev->AiForceDpx = 1;
break;
case 2: /* 10Mb Full-Duplex */
etdev->AiForceSpeed = 10;
etdev->AiForceDpx = 2;
break;
case 3: /* 100Mb Half-Duplex */
etdev->AiForceSpeed = 100;
etdev->AiForceDpx = 1;
break;
case 4: /* 100Mb Full-Duplex */
etdev->AiForceSpeed = 100;
etdev->AiForceDpx = 2;
break;
case 5: /* 1000Mb Full-Duplex */
etdev->AiForceSpeed = 1000;
etdev->AiForceDpx = 2;
break;
}
etdev->AiForceSpeed = speed[etdev->SpeedDuplex];
etdev->AiForceDpx = duplex[etdev->SpeedDuplex]; /* Auto FDX */
DBG_LEAVE(et131x_dbginfo);
}

View File

@ -442,10 +442,9 @@ void et131x_error_timer_handler(unsigned long data)
pm_csr.value = readl(&etdev->regs->global.pm_csr.value);
if (pm_csr.bits.pm_phy_sw_coma == 0) {
if (etdev->RegistryMACStat)
UpdateMacStatHostCounters(etdev);
} else
if (pm_csr.bits.pm_phy_sw_coma == 0)
UpdateMacStatHostCounters(etdev);
else
DBG_VERBOSE(et131x_dbginfo,
"No interrupts, in PHY coma, pm_csr = 0x%x\n",
pm_csr.value);