R0dn3yS/android_kernel_xiaomi_sm7250
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
92704a1c63
android_kernel_xiaomi_sm7250/arch/sparc64/kernel/winfixup.S

382 lines
11 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/* $Id: winfixup.S,v 1.30 2002/02/09 19:49:30 davem Exp $
*
* winfixup.S: Handle cases where user stack pointer is found to be bogus.
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
*/
#include <asm/asi.h>
#include <asm/head.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/spitfire.h>
#include <asm/thread_info.h>
.text
set_pcontext:
[SPARC64]: Replace cheetah+ code patching with variables. Instead of code patching to handle the page size fields in the context registers, just use variables from which we get the proper values. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-05 00:23:20 +02:00
sethi %hi(sparc64_kern_pri_context), %l1
ldx [%l1 + %lo(sparc64_kern_pri_context)], %l1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
mov PRIMARY_CONTEXT, %g1
stxa %l1, [%g1] ASI_DMMU
[SPARC64]: Fix bogus flush instruction usage. Some of the trap code was still assuming that alternate global %g6 was hard coded with current_thread_info(). Let's just consistently flush at KERNBASE when we need a pipeline synchronization. That's locked into the TLB and will always work. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 03:33:00 +01:00
sethi %hi(KERNBASE), %l1
flush %l1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
retl
nop
.align 32
/* Here are the rules, pay attention.
*
* The kernel is disallowed from touching user space while
* the trap level is greater than zero, except for from within
* the window spill/fill handlers. This must be followed
* so that we can easily detect the case where we tried to
* spill/fill with a bogus (or unmapped) user stack pointer.
*
* These are layed out in a special way for cache reasons,
* don't touch...
*/
.globl fill_fixup, spill_fixup
fill_fixup:
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 08:24:22 +01:00
TRAP_LOAD_THREAD_REG
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
or %g4, FAULT_CODE_WINFIXUP, %g4
be,pt %xcc, window_scheisse_from_user_common
and %g1, TSTATE_CWP, %g1
/* This is the extremely complex case, but it does happen from
* time to time if things are just right. Essentially the restore
* done in rtrap right before going back to user mode, with tl=1
* and that levels trap stack registers all setup, took a fill trap,
* the user stack was not mapped in the tlb, and tlb miss occurred,
* the pte found was not valid, and a simple ref bit watch update
* could not satisfy the miss, so we got here.
*
* We must carefully unwind the state so we get back to tl=0, preserve
* all the register values we were going to give to the user. Luckily
* most things are where they need to be, we also have the address
* which triggered the fault handy as well.
*
* Also note that we must preserve %l5 and %l6. If the user was
* returning from a system call, we must make it look this way
* after we process the fill fault on the users stack.
*
* First, get into the window where the original restore was executed.
*/
rdpr %wstate, %g2 ! Grab user mode wstate.
wrpr %g1, %cwp ! Get into the right window.
sll %g2, 3, %g2 ! NORMAL-->OTHER
wrpr %g0, 0x0, %canrestore ! Standard etrap stuff.
wrpr %g2, 0x0, %wstate ! This must be consistent.
wrpr %g0, 0x0, %otherwin ! We know this.
call set_pcontext ! Change contexts...
nop
rdpr %pstate, %l1 ! Prepare to change globals.
mov %g6, %o7 ! Get current.
andn %l1, PSTATE_MM, %l1 ! We want to be in RMO
stb %g4, [%g6 + TI_FAULT_CODE]
stx %g5, [%g6 + TI_FAULT_ADDR]
wrpr %g0, 0x0, %tl ! Out of trap levels.
wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate
mov %o7, %g6
ldx [%g6 + TI_TASK], %g4
[SPARC64]: Fix race in LOAD_PER_CPU_BASE() Since we use %g5 itself as a temporary, it can get clobbered if we take an interrupt mid-stream and thus cause end up with the final %g5 value too early as a result of rtrap processing. Set %g5 at the very end, atomically, to avoid this problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 03:34:51 +01:00
LOAD_PER_CPU_BASE(%g1, %g2, %g3)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/* This is the same as below, except we handle this a bit special
* since we must preserve %l5 and %l6, see comment above.
*/
call do_sparc64_fault
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
nop ! yes, nop is correct
/* Be very careful about usage of the alternate globals here.
* You cannot touch %g4/%g5 as that has the fault information
* should this be from usermode. Also be careful for the case
* where we get here from the save instruction in etrap.S when
* coming from either user or kernel (does not matter which, it
* is the same problem in both cases). Essentially this means
* do not touch %g7 or %g2 so we handle the two cases fine.
*/
spill_fixup:
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 08:24:22 +01:00
TRAP_LOAD_THREAD_REG
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
ldx [%g6 + TI_FLAGS], %g1
andcc %g1, _TIF_32BIT, %g0
ldub [%g6 + TI_WSAVED], %g1
sll %g1, 3, %g3
add %g6, %g3, %g3
stx %sp, [%g3 + TI_RWIN_SPTRS]
sll %g1, 7, %g3
bne,pt %xcc, 1f
add %g6, %g3, %g3
stx %l0, [%g3 + TI_REG_WINDOW + 0x00]
stx %l1, [%g3 + TI_REG_WINDOW + 0x08]
stx %l2, [%g3 + TI_REG_WINDOW + 0x10]
stx %l3, [%g3 + TI_REG_WINDOW + 0x18]
stx %l4, [%g3 + TI_REG_WINDOW + 0x20]
stx %l5, [%g3 + TI_REG_WINDOW + 0x28]
stx %l6, [%g3 + TI_REG_WINDOW + 0x30]
stx %l7, [%g3 + TI_REG_WINDOW + 0x38]
stx %i0, [%g3 + TI_REG_WINDOW + 0x40]
stx %i1, [%g3 + TI_REG_WINDOW + 0x48]
stx %i2, [%g3 + TI_REG_WINDOW + 0x50]
stx %i3, [%g3 + TI_REG_WINDOW + 0x58]
stx %i4, [%g3 + TI_REG_WINDOW + 0x60]
stx %i5, [%g3 + TI_REG_WINDOW + 0x68]
stx %i6, [%g3 + TI_REG_WINDOW + 0x70]
b,pt %xcc, 2f
stx %i7, [%g3 + TI_REG_WINDOW + 0x78]
1: stw %l0, [%g3 + TI_REG_WINDOW + 0x00]
stw %l1, [%g3 + TI_REG_WINDOW + 0x04]
stw %l2, [%g3 + TI_REG_WINDOW + 0x08]
stw %l3, [%g3 + TI_REG_WINDOW + 0x0c]
stw %l4, [%g3 + TI_REG_WINDOW + 0x10]
stw %l5, [%g3 + TI_REG_WINDOW + 0x14]
stw %l6, [%g3 + TI_REG_WINDOW + 0x18]
stw %l7, [%g3 + TI_REG_WINDOW + 0x1c]
stw %i0, [%g3 + TI_REG_WINDOW + 0x20]
stw %i1, [%g3 + TI_REG_WINDOW + 0x24]
stw %i2, [%g3 + TI_REG_WINDOW + 0x28]
stw %i3, [%g3 + TI_REG_WINDOW + 0x2c]
stw %i4, [%g3 + TI_REG_WINDOW + 0x30]
stw %i5, [%g3 + TI_REG_WINDOW + 0x34]
stw %i6, [%g3 + TI_REG_WINDOW + 0x38]
stw %i7, [%g3 + TI_REG_WINDOW + 0x3c]
2: add %g1, 1, %g1
stb %g1, [%g6 + TI_WSAVED]
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
saved
and %g1, TSTATE_CWP, %g1
[SPARC64]: Don't clobber alt-global %g4 on window fixups. If we are returning back to kernel mode, %g4 could be live (for example, in the case where we window spill in the etrap code). So do not change it's value if going back to kernel. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 03:35:05 +01:00
be,a,pn %xcc, window_scheisse_from_user_common
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
mov FAULT_CODE_WRITE | FAULT_CODE_DTLB | FAULT_CODE_WINFIXUP, %g4
retry
window_scheisse_from_user_common:
stb %g4, [%g6 + TI_FAULT_CODE]
stx %g5, [%g6 + TI_FAULT_ADDR]
wrpr %g1, %cwp
ba,pt %xcc, etrap
rd %pc, %g7
call do_sparc64_fault
add %sp, PTREGS_OFF, %o0
ba,a,pt %xcc, rtrap_clr_l6
.globl winfix_mna, fill_fixup_mna, spill_fixup_mna
winfix_mna:
andn %g3, 0x7f, %g3
add %g3, 0x78, %g3
wrpr %g3, %tnpc
done
fill_fixup_mna:
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 08:24:22 +01:00
TRAP_LOAD_THREAD_REG
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
be,pt %xcc, window_mna_from_user_common
and %g1, TSTATE_CWP, %g1
/* Please, see fill_fixup commentary about why we must preserve
* %l5 and %l6 to preserve absolute correct semantics.
*/
rdpr %wstate, %g2 ! Grab user mode wstate.
wrpr %g1, %cwp ! Get into the right window.
sll %g2, 3, %g2 ! NORMAL-->OTHER
wrpr %g0, 0x0, %canrestore ! Standard etrap stuff.
wrpr %g2, 0x0, %wstate ! This must be consistent.
wrpr %g0, 0x0, %otherwin ! We know this.
call set_pcontext ! Change contexts...
nop
rdpr %pstate, %l1 ! Prepare to change globals.
mov %g4, %o2 ! Setup args for
mov %g5, %o1 ! final call to mem_address_unaligned.
andn %l1, PSTATE_MM, %l1 ! We want to be in RMO
mov %g6, %o7 ! Stash away current.
wrpr %g0, 0x0, %tl ! Out of trap levels.
wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate
mov %o7, %g6 ! Get current back.
ldx [%g6 + TI_TASK], %g4 ! Finish it.
[SPARC64]: Fix race in LOAD_PER_CPU_BASE() Since we use %g5 itself as a temporary, it can get clobbered if we take an interrupt mid-stream and thus cause end up with the final %g5 value too early as a result of rtrap processing. Set %g5 at the very end, atomically, to avoid this problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 03:34:51 +01:00
LOAD_PER_CPU_BASE(%g1, %g2, %g3)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
call mem_address_unaligned
add %sp, PTREGS_OFF, %o0
b,pt %xcc, rtrap
nop ! yes, the nop is correct
spill_fixup_mna:
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 08:24:22 +01:00
TRAP_LOAD_THREAD_REG
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
ldx [%g6 + TI_FLAGS], %g1
andcc %g1, _TIF_32BIT, %g0
ldub [%g6 + TI_WSAVED], %g1
sll %g1, 3, %g3
add %g6, %g3, %g3
stx %sp, [%g3 + TI_RWIN_SPTRS]
sll %g1, 7, %g3
bne,pt %xcc, 1f
add %g6, %g3, %g3
stx %l0, [%g3 + TI_REG_WINDOW + 0x00]
stx %l1, [%g3 + TI_REG_WINDOW + 0x08]
stx %l2, [%g3 + TI_REG_WINDOW + 0x10]
stx %l3, [%g3 + TI_REG_WINDOW + 0x18]
stx %l4, [%g3 + TI_REG_WINDOW + 0x20]
stx %l5, [%g3 + TI_REG_WINDOW + 0x28]
stx %l6, [%g3 + TI_REG_WINDOW + 0x30]
stx %l7, [%g3 + TI_REG_WINDOW + 0x38]
stx %i0, [%g3 + TI_REG_WINDOW + 0x40]
stx %i1, [%g3 + TI_REG_WINDOW + 0x48]
stx %i2, [%g3 + TI_REG_WINDOW + 0x50]
stx %i3, [%g3 + TI_REG_WINDOW + 0x58]
stx %i4, [%g3 + TI_REG_WINDOW + 0x60]
stx %i5, [%g3 + TI_REG_WINDOW + 0x68]
stx %i6, [%g3 + TI_REG_WINDOW + 0x70]
stx %i7, [%g3 + TI_REG_WINDOW + 0x78]
b,pt %xcc, 2f
add %g1, 1, %g1
1: std %l0, [%g3 + TI_REG_WINDOW + 0x00]
std %l2, [%g3 + TI_REG_WINDOW + 0x08]
std %l4, [%g3 + TI_REG_WINDOW + 0x10]
std %l6, [%g3 + TI_REG_WINDOW + 0x18]
std %i0, [%g3 + TI_REG_WINDOW + 0x20]
std %i2, [%g3 + TI_REG_WINDOW + 0x28]
std %i4, [%g3 + TI_REG_WINDOW + 0x30]
std %i6, [%g3 + TI_REG_WINDOW + 0x38]
add %g1, 1, %g1
2: stb %g1, [%g6 + TI_WSAVED]
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
saved
be,pn %xcc, window_mna_from_user_common
and %g1, TSTATE_CWP, %g1
retry
window_mna_from_user_common:
wrpr %g1, %cwp
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o2
mov %l5, %o1
call mem_address_unaligned
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
.globl winfix_dax, fill_fixup_dax, spill_fixup_dax
winfix_dax:
andn %g3, 0x7f, %g3
add %g3, 0x74, %g3
wrpr %g3, %tnpc
done
fill_fixup_dax:
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 08:24:22 +01:00
TRAP_LOAD_THREAD_REG
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
be,pt %xcc, window_dax_from_user_common
and %g1, TSTATE_CWP, %g1
/* Please, see fill_fixup commentary about why we must preserve
* %l5 and %l6 to preserve absolute correct semantics.
*/
rdpr %wstate, %g2 ! Grab user mode wstate.
wrpr %g1, %cwp ! Get into the right window.
sll %g2, 3, %g2 ! NORMAL-->OTHER
wrpr %g0, 0x0, %canrestore ! Standard etrap stuff.
wrpr %g2, 0x0, %wstate ! This must be consistent.
wrpr %g0, 0x0, %otherwin ! We know this.
call set_pcontext ! Change contexts...
nop
rdpr %pstate, %l1 ! Prepare to change globals.
mov %g4, %o1 ! Setup args for
[SPARC64]: Revamp Spitfire error trap handling. Current uncorrectable error handling was poor enough that the processor could just loop taking the same trap over and over again. Fix things up so that we at least get a log message and perhaps even some register state. In the process, much consolidation became possible, particularly with the correctable error handler. Prefix assembler and C function names with "spitfire" to indicate that these are for Ultra-I/II/IIi/IIe only. More work is needed to make these routines robust and featureful to the level of the Ultra-III error handlers. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 21:45:11 +02:00
mov %g5, %o2 ! final call to spitfire_data_access_exception.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
andn %l1, PSTATE_MM, %l1 ! We want to be in RMO
mov %g6, %o7 ! Stash away current.
wrpr %g0, 0x0, %tl ! Out of trap levels.
wrpr %l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate
mov %o7, %g6 ! Get current back.
ldx [%g6 + TI_TASK], %g4 ! Finish it.
[SPARC64]: Fix race in LOAD_PER_CPU_BASE() Since we use %g5 itself as a temporary, it can get clobbered if we take an interrupt mid-stream and thus cause end up with the final %g5 value too early as a result of rtrap processing. Set %g5 at the very end, atomically, to avoid this problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 03:34:51 +01:00
LOAD_PER_CPU_BASE(%g1, %g2, %g3)
[SPARC64]: Revamp Spitfire error trap handling. Current uncorrectable error handling was poor enough that the processor could just loop taking the same trap over and over again. Fix things up so that we at least get a log message and perhaps even some register state. In the process, much consolidation became possible, particularly with the correctable error handler. Prefix assembler and C function names with "spitfire" to indicate that these are for Ultra-I/II/IIi/IIe only. More work is needed to make these routines robust and featureful to the level of the Ultra-III error handlers. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 21:45:11 +02:00
call spitfire_data_access_exception
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
add %sp, PTREGS_OFF, %o0
b,pt %xcc, rtrap
nop ! yes, the nop is correct
spill_fixup_dax:
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 08:24:22 +01:00
TRAP_LOAD_THREAD_REG
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
ldx [%g6 + TI_FLAGS], %g1
andcc %g1, _TIF_32BIT, %g0
ldub [%g6 + TI_WSAVED], %g1
sll %g1, 3, %g3
add %g6, %g3, %g3
stx %sp, [%g3 + TI_RWIN_SPTRS]
sll %g1, 7, %g3
bne,pt %xcc, 1f
add %g6, %g3, %g3
stx %l0, [%g3 + TI_REG_WINDOW + 0x00]
stx %l1, [%g3 + TI_REG_WINDOW + 0x08]
stx %l2, [%g3 + TI_REG_WINDOW + 0x10]
stx %l3, [%g3 + TI_REG_WINDOW + 0x18]
stx %l4, [%g3 + TI_REG_WINDOW + 0x20]
stx %l5, [%g3 + TI_REG_WINDOW + 0x28]
stx %l6, [%g3 + TI_REG_WINDOW + 0x30]
stx %l7, [%g3 + TI_REG_WINDOW + 0x38]
stx %i0, [%g3 + TI_REG_WINDOW + 0x40]
stx %i1, [%g3 + TI_REG_WINDOW + 0x48]
stx %i2, [%g3 + TI_REG_WINDOW + 0x50]
stx %i3, [%g3 + TI_REG_WINDOW + 0x58]
stx %i4, [%g3 + TI_REG_WINDOW + 0x60]
stx %i5, [%g3 + TI_REG_WINDOW + 0x68]
stx %i6, [%g3 + TI_REG_WINDOW + 0x70]
stx %i7, [%g3 + TI_REG_WINDOW + 0x78]
b,pt %xcc, 2f
add %g1, 1, %g1
1: std %l0, [%g3 + TI_REG_WINDOW + 0x00]
std %l2, [%g3 + TI_REG_WINDOW + 0x08]
std %l4, [%g3 + TI_REG_WINDOW + 0x10]
std %l6, [%g3 + TI_REG_WINDOW + 0x18]
std %i0, [%g3 + TI_REG_WINDOW + 0x20]
std %i2, [%g3 + TI_REG_WINDOW + 0x28]
std %i4, [%g3 + TI_REG_WINDOW + 0x30]
std %i6, [%g3 + TI_REG_WINDOW + 0x38]
add %g1, 1, %g1
2: stb %g1, [%g6 + TI_WSAVED]
rdpr %tstate, %g1
andcc %g1, TSTATE_PRIV, %g0
saved
be,pn %xcc, window_dax_from_user_common
and %g1, TSTATE_CWP, %g1
retry
window_dax_from_user_common:
wrpr %g1, %cwp
sethi %hi(109f), %g7
ba,pt %xcc, etrap
109: or %g7, %lo(109b), %g7
mov %l4, %o1
mov %l5, %o2
[SPARC64]: Revamp Spitfire error trap handling. Current uncorrectable error handling was poor enough that the processor could just loop taking the same trap over and over again. Fix things up so that we at least get a log message and perhaps even some register state. In the process, much consolidation became possible, particularly with the correctable error handler. Prefix assembler and C function names with "spitfire" to indicate that these are for Ultra-I/II/IIi/IIe only. More work is needed to make these routines robust and featureful to the level of the Ultra-III error handlers. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 21:45:11 +02:00
call spitfire_data_access_exception
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
clr %l6
Reference in New Issue Copy Permalink